The Spare Rubber Membrane for a 380V Pressure Switch is a replacement part designed for use in pressure switches that operate with a 380V electrical system. The rubber membrane is a critical component that responds to pressure changes within a system, helping the switch to function correctly by opening or closing electrical contacts at a specific pressure threshold. Over time, the rubber membrane may wear or degrade, necessitating a replacement to maintain the proper operation of the pressure switch. This spare part ensures continued reliability and performance of pressure control systems in industrial or machinery applications.

Agrinet Spotlight Power Adaptor - 12V

The Valve + Ferrule & Nut for Pressure Switch is a set of components used to connect and secure a pressure switch in a system.

The valve controls the flow of fluid or gas, regulating the pressure in the system.
The ferrule is a small, typically ring-shaped fitting that ensures a tight seal and prevents leaks when the valve is connected to the pressure switch.
The nut is used to secure the ferrule and valve in place, ensuring everything is properly fastened and sealed.
This set is essential for maintaining the integrity and functionality of the pressure switch, often found in applications like HVAC systems, water pumps, or industrial machinery.

The Non-Return Valve 1/4M - 3/8M Viton is a check valve designed to allow fluid or gas to flow in one direction only, preventing backflow. It has a 1/4-inch male thread on one side and a 3/8-inch male thread on the other, making it suitable for use in various piping systems with these specific thread sizes. The valve is made with Viton, a high-performance synthetic rubber known for its resistance to heat, chemicals, and aging, ensuring durability and reliability in demanding industrial applications. This non-return valve is ideal for use in fluid, gas, or pneumatic systems where controlling flow direction is crucial.

A Metal PU Fitting Straight 8mm 1/4" F is a connector used to join 8mm polyurethane (PU) tubing with a 1/4" female (F) threaded port. The straight design provides a direct connection between components, allowing fluid or air to flow through the system without interruption. Made from metal, it offers strength, durability, and resistance to wear and corrosion. This type of fitting is commonly used in pneumatic, hydraulic, and fluid systems, ensuring a secure and leak-proof connection for industrial, automotive, or other applications where PU tubing is used.

Prepack fuses for automotive use.

Introducing the GR5 Geyserobot: A cutting-edge smart geyser temperature controller for ultimate convenience This SMART MODULE can CONVERT any CONVENTIONAL electric Geyser (1-4kw) into a SOLAR PV HYBRID Control your geysers temperature from anywhere worldwide using the intuitive mobile app, eliminating the hassle of returning to a cold shower’. Seamlessly connects to your home;s Wi-Fi network for easy access and adjustment of temperature settings Eco-friendly solution: Harnesses solar panel technology to maximize energy efficiency, reducing reliance on conventional electricity and lowering your utility bill Create custom temperature schedules aligned with your daily routines through the user-friendly app interface Full control at your fingertips: Adjust temperature remotely with a few taps on your smartphone or tablet Built-in safety features prevent overheating and scalding accidents, prioritizing your family’s well-being. Easy installation: Compatible with most standard geysers, seamlessly integrating into your existing setup with its compact, sleek design. Embrace the future of geyser control and energy efficiency with the GR5 Geyserobot, offering unparalleled comfort, reduced energy costs, and a positive environmental impact worldwide. Far Superior than traditional solar Geyers: Hybrid Function Smart Enabled Built in Timers Display screen - Can be placed anywhere on your property whether next to your Bed or In the Reception area at a B&B. Aesthetically pleasing as Geyser is not moved or replaced but merely enhanced. Can take up to 300VDC dependent on your heating requirements Requires no maintenance once installed Solar Panels & mounting structures not included

The T Connector (1/2" MMF, Packaged) is a pneumatic fitting designed to form a T-shaped connection in air or fluid systems. It features 1/2" male threads on the two side ports and a female thread on the center port, allowing it to easily connect with other male-threaded components. Made from durable, corrosion-resistant materials, this fitting ensures a secure, leak-free connection. Ideal for use in compressed air, automotive, and industrial applications, the connector is packaged for convenience, ready for easy storage and handling.

A Y Connector FFF 1/2" is a fitting used to join three pipes or hoses in a Y-shaped configuration. The "FFF" designation typically refers to female threads on all three openings. The 1/2" size indicates the diameter of the pipe or hose connections. This type of connector is commonly used in plumbing, irrigation, or fluid systems to split or combine flows, offering a secure and leak-proof connection for different pipes or hoses.

The T Connector 1/2" FFM is a pneumatic or plumbing fitting designed to create a T-shaped connection between three pipes. It has a 1/2" female thread (F) on both ends and a 1/2" male thread (M) in the center. This connector allows you to branch or combine fluid or air flow in your pipeline system. It is commonly used in various applications, including fluid transfer systems, air compressors, or other industrial setups, where branching or splitting of flow is required. The durable design ensures a secure and leak-free connection.

The T Connector 1/2" MMF is a plumbing fitting designed to connect three pipes in a T-shaped configuration. It features a 1/2-inch size with male-threaded (M) connections on both ends and a female-threaded (F) connection in the center. This fitting is commonly used in plumbing, irrigation, and pneumatic systems to create a branch or divide a single pipeline into two directions. Made from durable materials, it ensures a reliable, secure connection for fluid or air flow.

A flush mounting bracket with a recessed 50A Anderson connector for mounting into trims and panels.Applicable to the installation and use of high-end, large-scale transportation tools such as ships, yachts, motorhomes, and buses. And it can be used in an environment with a minimum temperature of -25 Celsius and a maximum temperature of 80 Celsius. It is equipped with dual USB ports, which can be used for power supply of external devices of the car. And it can also supply power for mobile phones, tablets, GPS, etcModel: Car Anderson socket Working voltage: 600 Working current: 50A Working temperature: -25 Celsius-80 Celsius Protection level: IP65 Item Type: Flush Mount Anderson Plug Recharge Panel Special Features: Anderson Plug Colour: black Material: Metal + Plastic What's in the box 1 x Flush Mount Anderson Plug 50a Connector Kit Mounting Bracket

A Pressure Switch 380V 1 Way 2.5-4 Amp Overload is a device used to monitor and regulate pressure in systems operating at 380V. This pressure switch is designed to handle currents between 2.5 and 4 amps. It activates when the pressure reaches a predefined setpoint, ensuring the system maintains optimal pressure levels. The overload protection feature helps safeguard the system by cutting off or regulating the current if it exceeds safe levels, preventing potential damage due to excessive current flow and enhancing system reliability and safety.

The Airblock Security Magnum Coupler (1/2" Female) features a Two-Stage Release Safety mechanism designed to prevent accidental disconnections in high-pressure air systems. The 1/2" female connection allows it to be easily integrated into pneumatic setups, providing a secure, reliable connection. The two-stage release ensures that the coupling can only be disengaged in a controlled manner, enhancing safety by preventing unintended disconnects under pressure. This coupler is ideal for use in industrial and workshop environments, where safety and durability are crucial for maintaining efficient operations in air-powered tools and machinery.

The 4-Way Connector 1/2" 3F/1M Packaged is a versatile plumbing or fluid control fitting designed for branching connections.

The 1/2" size refers to the diameter of the connector's threads, suitable for use with pipes or hoses that fit a 1/2-inch size.
The 3F/1M configuration means the connector has three female (F) threaded ports and one male (M) threaded port. This allows it to be used to branch a single line into multiple directions, offering flexibility in fluid or air systems.
The packaged version indicates it comes neatly sealed, making it ready for storage, handling, or easy retail display.
This 4-way connector is commonly used in plumbing, irrigation systems, or pneumatic setups, allowing for efficient distribution or redirection of water, air, or other fluids.

The Metal PU Fitting Straight (12mm) is a durable push-to-connect fitting designed for 12mm PU tubing. It ensures a secure, leak-proof connection without the need for additional tools, making it easy to install in pneumatic systems. Made from high-quality metal, it offers reliable performance, pressure resistance, and long-lasting durability, making it ideal for industrial and automation applications.

A Spare Cover for 3 Phase Pressure Switch is a replacement cover designed for a 3-phase pressure switch, commonly used in industrial or commercial systems for controlling pressure levels in air compressors, pumps, or other machinery that requires pressure regulation.

Specifications:
Purpose: Protects the internal components of the pressure switch from dust, debris, and environmental factors, ensuring the switch remains operational.
Material: Typically made from durable plastic or metal, offering impact resistance and long-term protection.
Compatibility: Designed to fit specific models of 3-phase pressure switches, ensuring proper seal and functionality.
Application: Often used in pumps, compressors, hydraulic systems, and other equipment where pressure control is critical.
Applications:
This spare cover is used to replace a damaged or worn-out cover on a 3-phase pressure switch. Ensuring the switch remains sealed and protected from external conditions, this cover is essential for maintaining the performance and reliability of pressure-regulating systems in various industrial applications.

Nexus Steel Extension Reel - 2.5mm 16A (20m)

Adaptor with round 5A and euro 5A connections

Good quality extension reel with 2 x 3-Pin plugs, 1 x 2-Pin Euro, ON/OFF switch and built-in low level surge protection. Metal frame for durability.

Features: - 120 amp grey Anderson plug to be used for installing a solar panel - Fridges - Battery systems Specifications: - Colour: grey - Material: Plastic - Dimensions: 7cm x 15cm - Weight: 40g - Warranty: 12 months What's in the box 1 x Grey 120 Amp Square Connector and 2 x Lugs

Major Tech’s range of populated boards are both stylish and rugged. Populated Boards must be installed by a qualified electrician.

Bulk Pack x 20 Globe Single Filament 12V G1073

The 4-Way Connector 1/2" Mmm is a versatile connector designed for use in plumbing or fluid transfer systems. It features four 1/2" male connections that allow you to split or combine flow in multiple directions. This connector is ideal for branching off a pipe or hose in a fluid distribution system, providing flexibility in routing and connecting different components. Packaged for convenience, this connector is suitable for a variety of applications, including irrigation, air systems, or other systems requiring secure, leak-free connections. Its durable construction ensures reliability in both residential and commercial settings.

The T Connector 1/2" FFM Packaged is a type of plumbing or piping connector designed to join three sections of pipe or hose.

1/2": This refers to the size of the connector, with a 1/2-inch diameter, commonly used in plumbing, irrigation, or pneumatic systems.
FFM: Stands for Female-Female-Male, indicating the type of threaded connections the T-connector has: two female threads on the sides and one male thread in the center. This configuration allows you to connect pipes or hoses in a T-shape, where the center section connects to a different pipe or fitting.
Packaged: The T connector comes in a package, making it easy for storage and transport.
This fitting is ideal for applications where you need to split or join flow directions in a pipe or hose system, such as in water or air distribution systems.