Hanging and Framing Hardware : 2m Picture Wire : Brass : Holds 11kg Max

Twelve Flexi Plates to affix canvases into Jackson's Easy Assemble Frames or any wood frame.

If needed bend into a 'Z'-shape with pliers or on the edge of a table to accomodate canvases than are higher or lower than the back of the frame.

The Flexi Plates will follow the contours.

The simplest way to hold a canvas in

place. Tap one end into the rebate of the moulding, do this with 4-

10 clips, drop the canvas in, bend over and tap the other end into

the back of the stretcher bar.

Dala Art Mount Spray is a clear spray adhesive and is best suited to bonding lightweight materials instantly. It offers a temporary OR a permanent bond, depending on your desired result. Ideal for paper projects (collage); scrapbooking and artwork or photograph mounting.

Hanging and Framing Hardware : Heavy Duty Hangers : 2 in Pack

Hanging and Framing Hardware : Double Picture Hooks : 4 Hooks and Pins

Daler Rowney Graduate Mountboard is suitable for both mounting and framing purposes. This economy mount board can be used for artworks, photographs, modelling, and school or college project work.These boards are pH neutral and meet the Fine Art Trade Guild’s standard specification.

Contains ice white sheets.

Made with a cream core.

Size A3 with a thickness of 1250 microns.

Pack of 8

Hanging and Framing Hardware : Plasterboard Wall Hook : 3 in Pack

Hanging and Framing Hardware Double D Rings - 4 Rings and Screws

The Jakar mount cutter has been designed to cut mount boards with a 45 degree angle and a 90 degree angle.

It should always be used in conjunction with the Jakar aluminium ruler. The cutting should be done from the rear of the mount board. In order to achevie a 45 degree angle, ruler is to be placed on the outside of the aperture, for the 90 degree angle place on the inside of the aperture.Specifications..

Cuts material up to 7mm thick.

Contains 2 blades plus 3 spares.

Newly developed v-type blades.

Daler Rowney Graduate Mountboard is suitable for both mounting and framing purposes. This economy mount board can be used for artworks, photographs, modelling, and school or college project work. These boards are pH neutral and meet the Fine Art Trade Guild’s standard specification.

Contains ice white sheets.

Made with a cream core.

Size A4 with a thickness of 1250 microns.

Pack of 12

• Water based dye for interior wood work • Suitable for use on floors • Leaves the grain visible • Suitable for use on both hard and soft woods • EN 71 approved – safe for toys • Approved by the Guild of Master Craftsmen • Can be mixed with Liberon Natural Finish Varnishes Product use Liberon Palette Wood Dyes are ideal for dying / colouring all interior bare wood work around the home, whilst leaving the natural beauty of the grain visible. Palette Wood Dyes are suitable for both soft and hard wood and are EN 71 Part 3 Approved – safe for toys. Quick and uniform results can be achieved on large and small surfaces such as furniture, floors, doors, cupboards, frames and toys. Liberon Palette Wood Dyes are easy to use and come in a range of wood shades. The different colours can be mixed to vary the shade. Preparation Ensure the surface is thoroughly sanded, bare and free from dust. Application Shake well before use. If more than one tin of dye is required to complete the work, mix the tins of dye together to ensure a uniform colour. Apply the Palette Wood Dye fairly quickly along the grain using a foam applicator or brush. Wipe off excess with a clean, dry, cotton cloth before it dries to even out the colour. On large surfaces such as floors avoid overlap marks by working a small section at a time. A second coat may be applied after 2 hours if a stronger colour is required. More than two coats of dye may affect the final finish. Liberon Palette Wood Dye may be added to Liberon Natural Finish Varnish and Natural Finish Floor Varnish to create a range of coloured, water based varnishes. Important Always test product on a spare or inconspicuous area for colour, compatibility and end result. Different types of wood produce different results. The colour bar may not be a true representation of the actual colour. Precautions • Do not mix a water based dye with a spirit based dye. • Wear gloves to avoid skin staining. • Caution must be taken when using water based finishes over Liberon Palette Wood Dye. Keep brush strokes to a minimum as over brushing may lift out the colour. • Do not allow to freeze.

Hanging and Framing Hardware : Hard Wall Picture Hooks : 4 Hooks and Pins

Hanging and Framing Hardware : Triple Picture Hooks : 3 Hooks and Pins

For Combi Frame Box frame style A, flush, with no rebate (ledge).For 18mm canvas.Specifications..

Use to retouch damaged gilding or to gild new surfaces.

Performance- Use to retouch damaged gilding or to gild new surfaces- Easy to use- All colours are intermixable

Preparation

Seal porous surfaces, such as woods and plaster, with Liberon Fontenay Base before applying Liberon Gilt Cream. Ensure surface is clean, dry and free from dust.Application

Apply to the surface with a cotton cloth or small brush for intricate areas. Allow to dry for a minimum of 4 hours, longer if possible and either leave matt or buff to a shine. For a better finish we recommend applying several thin coats of Gilt Cream as oppose to one thick coat.Important

Always test product on a spare surface or inconspicuous area for colour, compatibility and end result. Clean tools in white spirit.

Precautions

Gilt Creams may be reactivated or thinned with Liberon Pure Turpentine or good quality white spirit.

This is a hardened nail with a friction-fit sliding collar.

It is designed for medium hard wall surfaces.

As the nail is driven in the collar stays flush with the wall surface, minimising any possible sagging of the nail.

Leave approximately. 8mm protruding to take the picture cord or wire. For pictures up to 1kg.

Please take care to ensure the nail is secure in the wall before hanging your work.

• Water based dye for interior wood work • Suitable for use on floors • Leaves the grain visible • Suitable for use on both hard and soft woods • EN 71 approved – safe for toys • Approved by the Guild of Master Craftsmen • Can be mixed with Liberon Natural Finish Varnishes Product use Liberon Palette Wood Dyes are ideal for dying / colouring all interior bare wood work around the home, whilst leaving the natural beauty of the grain visible. Palette Wood Dyes are suitable for both soft and hard wood and are EN 71 Part 3 Approved – safe for toys. Quick and uniform results can be achieved on large and small surfaces such as furniture, floors, doors, cupboards, frames and toys. Liberon Palette Wood Dyes are easy to use and come in a range of wood shades. The different colours can be mixed to vary the shade. Preparation Ensure the surface is thoroughly sanded, bare and free from dust. Application Shake well before use. If more than one tin of dye is required to complete the work, mix the tins of dye together to ensure a uniform colour. Apply the Palette Wood Dye fairly quickly along the grain using a foam applicator or brush. Wipe off excess with a clean, dry, cotton cloth before it dries to even out the colour. On large surfaces such as floors avoid overlap marks by working a small section at a time. A second coat may be applied after 2 hours if a stronger colour is required. More than two coats of dye may affect the final finish. Liberon Palette Wood Dye may be added to Liberon Natural Finish Varnish and Natural Finish Floor Varnish to create a range of coloured, water based varnishes. Important Always test product on a spare or inconspicuous area for colour, compatibility and end result. Different types of wood produce different results. The colour bar may not be a true representation of the actual colour. Precautions • Do not mix a water based dye with a spirit based dye. • Wear gloves to avoid skin staining. • Caution must be taken when using water based finishes over Liberon Palette Wood Dye. Keep brush strokes to a minimum as over brushing may lift out the colour. • Do not allow to freeze.

Hanging and Framing Hardware : Felt Frame Bumpers : 10 Self Adhesive Discs

• Water based dye for interior wood work • Suitable for use on floors • Leaves the grain visible • Suitable for use on both hard and soft woods • EN 71 approved – safe for toys • Approved by the Guild of Master Craftsmen • Can be mixed with Liberon Natural Finish Varnishes Product use Liberon Palette Wood Dyes are ideal for dying / colouring all interior bare wood work around the home, whilst leaving the natural beauty of the grain visible. Palette Wood Dyes are suitable for both soft and hard wood and are EN 71 Part 3 Approved – safe for toys. Quick and uniform results can be achieved on large and small surfaces such as furniture, floors, doors, cupboards, frames and toys. Liberon Palette Wood Dyes are easy to use and come in a range of wood shades. The different colours can be mixed to vary the shade. Preparation Ensure the surface is thoroughly sanded, bare and free from dust. Application Shake well before use. If more than one tin of dye is required to complete the work, mix the tins of dye together to ensure a uniform colour. Apply the Palette Wood Dye fairly quickly along the grain using a foam applicator or brush. Wipe off excess with a clean, dry, cotton cloth before it dries to even out the colour. On large surfaces such as floors avoid overlap marks by working a small section at a time. A second coat may be applied after 2 hours if a stronger colour is required. More than two coats of dye may affect the final finish. Liberon Palette Wood Dye may be added to Liberon Natural Finish Varnish and Natural Finish Floor Varnish to create a range of coloured, water based varnishes. Important Always test product on a spare or inconspicuous area for colour, compatibility and end result. Different types of wood produce different results. The colour bar may not be a true representation of the actual colour. Precautions • Do not mix a water based dye with a spirit based dye. • Wear gloves to avoid skin staining. • Caution must be taken when using water based finishes over Liberon Palette Wood Dye. Keep brush strokes to a minimum as over brushing may lift out the colour. • Do not allow to freeze.

• Water based dye for interior wood work • Suitable for use on floors • Leaves the grain visible • Suitable for use on both hard and soft woods • EN 71 approved – safe for toys • Approved by the Guild of Master Craftsmen • Can be mixed with Liberon Natural Finish Varnishes Product use Liberon Palette Wood Dyes are ideal for dying / colouring all interior bare wood work around the home, whilst leaving the natural beauty of the grain visible. Palette Wood Dyes are suitable for both soft and hard wood and are EN 71 Part 3 Approved – safe for toys. Quick and uniform results can be achieved on large and small surfaces such as furniture, floors, doors, cupboards, frames and toys. Liberon Palette Wood Dyes are easy to use and come in a range of wood shades. The different colours can be mixed to vary the shade. Preparation Ensure the surface is thoroughly sanded, bare and free from dust. Application Shake well before use. If more than one tin of dye is required to complete the work, mix the tins of dye together to ensure a uniform colour. Apply the Palette Wood Dye fairly quickly along the grain using a foam applicator or brush. Wipe off excess with a clean, dry, cotton cloth before it dries to even out the colour. On large surfaces such as floors avoid overlap marks by working a small section at a time. A second coat may be applied after 2 hours if a stronger colour is required. More than two coats of dye may affect the final finish. Liberon Palette Wood Dye may be added to Liberon Natural Finish Varnish and Natural Finish Floor Varnish to create a range of coloured, water based varnishes. Important Always test product on a spare or inconspicuous area for colour, compatibility and end result. Different types of wood produce different results. The colour bar may not be a true representation of the actual colour. Precautions • Do not mix a water based dye with a spirit based dye. • Wear gloves to avoid skin staining. • Caution must be taken when using water based finishes over Liberon Palette Wood Dye. Keep brush strokes to a minimum as over brushing may lift out the colour. • Do not allow to freeze.

The WC style blade fits the Straight Cutter, Straight/Bevel Cutter, Rabbet Cutter, and V-Groove Cutter. The WA blade fits the Circle Cutter. The WB blade fits theFreestyle Cutter, and WD drill tips fit the Hole Drill.

• Water based dye for interior wood work • Suitable for use on floors • Leaves the grain visible • Suitable for use on both hard and soft woods • EN 71 approved – safe for toys • Approved by the Guild of Master Craftsmen • Can be mixed with Liberon Natural Finish Varnishes Product use Liberon Palette Wood Dyes are ideal for dying / colouring all interior bare wood work around the home, whilst leaving the natural beauty of the grain visible. Palette Wood Dyes are suitable for both soft and hard wood and are EN 71 Part 3 Approved – safe for toys. Quick and uniform results can be achieved on large and small surfaces such as furniture, floors, doors, cupboards, frames and toys. Liberon Palette Wood Dyes are easy to use and come in a range of wood shades. The different colours can be mixed to vary the shade. Preparation Ensure the surface is thoroughly sanded, bare and free from dust. Application Shake well before use. If more than one tin of dye is required to complete the work, mix the tins of dye together to ensure a uniform colour. Apply the Palette Wood Dye fairly quickly along the grain using a foam applicator or brush. Wipe off excess with a clean, dry, cotton cloth before it dries to even out the colour. On large surfaces such as floors avoid overlap marks by working a small section at a time. A second coat may be applied after 2 hours if a stronger colour is required. More than two coats of dye may affect the final finish. Liberon Palette Wood Dye may be added to Liberon Natural Finish Varnish and Natural Finish Floor Varnish to create a range of coloured, water based varnishes. Important Always test product on a spare or inconspicuous area for colour, compatibility and end result. Different types of wood produce different results. The colour bar may not be a true representation of the actual colour. Precautions • Do not mix a water based dye with a spirit based dye. • Wear gloves to avoid skin staining. • Caution must be taken when using water based finishes over Liberon Palette Wood Dye. Keep brush strokes to a minimum as over brushing may lift out the colour. • Do not allow to freeze.