Hang pictures with wire or cord and align frames perfectly without wall damage. High performance adhesive - holds on strongly. Easy to put up - no need for nails or screws. Easy to remove - innovative stretch release technology leaves no surface damage. Each hanger holds up to 2kg in weight (4lb).

The Studland range of neutral pH mountboards are ideal for framing and presentation. - The surface paper and core are specially treated to minimize the effect of atmospheric pollutants and to enhance their useful lifespan. The mounting board comprises of three basic components, the surface paper, core and backing paper. The boards are ph neutral and clean bevel cut as standard. 1400 micron

Daler Rowney Graduate Mountboard is suitable for both mounting and framing purposes. This economy mount board can be used for artworks, photographs, modelling, and school or college project work.These boards are pH neutral and meet the Fine Art Trade Guild’s standard specification.

Contains ice white sheets.

Made with a cream core.

Size A2 with a thickness of 1250 microns.

Pack of 5

JAS White Core Mount Board is a 1.5mm thick acid-free mount board which weighs 850gsm. It consists of three layers: a 110gsm paper surface which is available in 16 colours; a 1.1mm thick, fully coated, bleached paperboard core which is acid free and which is considered sufficiently inert to be used in direct contact with documents; a backing layer of white chlorine- and acid-free cellulose paper.

These mountboards are not fully lightfast and should not be stored in direct sunlight, though they will display good colour-stability if stored out of direct sunlight. The front surface paper and the white paperboard core accords to ISO 6588, while the back paper accords to ISO9706. It is the back sheet, which is most fully in contact with the artwork, that has the highest archival specifications.

These pre-cut mount boards measure 24 x 30cm along the outer edge, with an aperture of 28 x 36 cm.

The simplest way to hold a canvas in

place. Tap one end into the rebate of the moulding, do this with 4-

10 clips, drop the canvas in, bend over and tap the other end into

the back of the stretcher bar.

The Spool holds 150 Metres of wire.

Twelve Flexi Plates to affix canvases into Jackson's Easy Assemble Frames or any wood frame.

If needed bend into a 'Z'-shape with pliers or on the edge of a table to accomodate canvases than are higher or lower than the back of the frame.

The Flexi Plates will follow the contours.

Combiframe is a frame system that has been developed for

creative people to replace expensive custom made frames.

Fantastic plain wooden frames suitable for all types of framing,

can be stained, painted, varnished or left as they are.

Simply select the sizes of the frames you require eg. 12x16“

canvas board will require one pair of 12“ frames and one

pair of 16“ frames. Aline the frames face down and insert the

dove tail joiners into the back of the frame corners. Easy!

No tools are required. Available in the three mouldings. 13/16” has a 5/32“

rebate and should be used for canvas boards, panels, mounted

watercolours, backed watercolours, clip frames and glazed work.

Slightly curved, light, close - grained wood ideal for hand finishing. Responds well to varnish, wax, stain and metal leaf. Most suitable for panels, paper based work with a backing board and glazing and photographs.

Dimensions: 3cms across the top, 1.2cms rebate, 1.5cms depth.

Use with FC3 Panel clips – Please note these clips will change and be nail in not push in. Or use your glazier point and glazier tool.

Specifications.

Width = 1 3/6in

Rebate = 5/32in

Depth = 3/4in

For Combi Frame Box frame style A, flush, with no rebate (ledge).For 18mm canvas.Specifications..

12 x Canvas offset clips 18mm and 1 sawtooth hanger

Dale Rowney Graduate Mountboard is suitable for both mounting and framing purposes. This economy mount board can be used for artworks, photographs, modelling, and school or college project work.These boards are pH neutral and meet the Fine Art Trade Guild’s standard specification.

Contains black sheets.

Made with a cream core.

Size A2 with a thickness of 1250 microns.

Pack of 5

Lightweight and acid free smooth board for presentation and other uses. Available in 3mm or 5mm and a number of sizes.

The spool holds 100 Meters of Nylon Cord. 8.9 KG MAX.

Length: 100m

Thickness: 3mm

This is a hardened nail with a friction-fit sliding collar.

It is designed for medium hard wall surfaces.

As the nail is driven in the collar stays flush with the wall surface, minimising any possible sagging of the nail.

Leave approximately. 8mm protruding to take the picture cord or wire. For pictures up to 1kg.

Please take care to ensure the nail is secure in the wall before hanging your work.

Daler Rowney Studland Mountboards feature a clean bevel cut and lasting quality, with a neutral pH surface. The surface paper, core, and backing are specially treated to minimise the effect of atmospheric pollutants and to enhance their lifespan. Approx. Size: A1; 23-3/8 x 33-1/8in; 594 x 841mm. 1. 4mm thickness. Size may vary slightly.

JAS White Core Mount Board is a 1.5mm thick acid-free mount board which weighs 850gsm. It consists of three layers: a 110gsm paper surface which is available in 16 colours; a 1.1mm thick, fully coated, bleached paperboard core which is acid free and which is considered sufficiently inert to be used in direct contact with documents; a backing layer of white chlorine- and acid-free cellulose paper.

These mountboards are not fully lightfast and should not be stored in direct sunlight, though they will display good colour-stability if stored out of direct sunlight. The front surface paper and the white paperboard core accords to ISO 6588, while the back paper accords to ISO9706. It is the back sheet, which is most fully in contact with the artwork, that has the highest archival specifications.

These pre-cut mount boards measure 24 x 30cm along the outer edge, with an aperture of 15 x 20 cm.

JAS White Core Mount Board is a 1.5mm thick acid-free mount board which weighs 850gsm. It consists of three layers: a 110gsm paper surface which is available in 16 colours; a 1.1mm thick, fully coated, bleached paperboard core which is acid free and which is considered sufficiently inert to be used in direct contact with documents; a backing layer of white chlorine- and acid-free cellulose paper.

These mountboards are not fully lightfast and should not be stored in direct sunlight, though they will display good colour-stability if stored out of direct sunlight. The front surface paper and the white paperboard core accords to ISO 6588, while the back paper accords to ISO9706. It is the back sheet, which is most fully in contact with the artwork, that has the highest archival specifications.

These pre-cut mount boards measure 24 x 30cm along the outer edge, with an aperture of 15 x 20 cm.

JAS White Core Mount Board is a 1.5mm thick acid-free mount board which weighs 850gsm. It consists of three layers: a 110gsm paper surface which is available in 16 colours; a 1.1mm thick, fully coated, bleached paperboard core which is acid free and which is considered sufficiently inert to be used in direct contact with documents; a backing layer of white chlorine- and acid-free cellulose paper.

These mountboards are not fully lightfast and should not be stored in direct sunlight, though they will display good colour-stability if stored out of direct sunlight. The front surface paper and the white paperboard core accords to ISO 6588, while the back paper accords to ISO9706. It is the back sheet, which is most fully in contact with the artwork, that has the highest archival specifications.

These pre-cut mount boards measure 24 x 30cm along the outer edge, with an aperture of 20 x 30 cm.

This is an adhesive craft paper tape perfect for carton sealing, packing, splicing, freezer tape, and straight-line masking.
The material is durable and provides stronge resistance to tearing.
The tape's adhesive quality is activated through heat to create a strong bond when applied.

Logan : 200x10mm hard wood V nails

Logan : 200x10mm soft wood V nails

This Backing board panel is 2.5mm thick and is made of MDF. It measures 20inx30in

Daler Rowney Studland Mountboards feature a clean bevel cut and lasting quality, with a neutral pH surface. The surface paper, core, and backing are specially treated to minimise the effect of atmospheric pollutants and to enhance their lifespan. Approx. Size: A1; 23-3/8 x 33-1/8in; 594 x 841mm. 1. 4mm thickness. Size may vary slightly.

The polystyrene core is bonded between high quality papers to create a lightweight, reliably rigid, ultra-smooth board. The foam board simpifies production, resists warping, and cuts cleanly. This line features a wide range of types, sizes and thicknesses. Can be used for exhibits, POP displays, signage, photo mounting, screenprinting and framing.

Dala Art Mount Spray is a clear spray adhesive and is best suited to bonding lightweight materials instantly. It offers a temporary OR a permanent bond, depending on your desired result. Ideal for paper projects (collage); scrapbooking and artwork or photograph mounting.