JAS White Core Mount Board is a 1.5mm thick acid-free mount board which weighs 850gsm. It consists of three layers: a 110gsm paper surface which is available in 16 colours; a 1.1mm thick, fully coated, bleached paperboard core which is acid free and which is considered sufficiently inert to be used in direct contact with documents; a backing layer of white chlorine- and acid-free cellulose paper.

These mountboards are not fully lightfast and should not be stored in direct sunlight, though they will display good colour-stability if stored out of direct sunlight. The front surface paper and the white paperboard core accords to ISO 6588, while the back paper accords to ISO9706. It is the back sheet, which is most fully in contact with the artwork, that has the highest archival specifications.

These pre-cut mount boards measure 24 x 30cm along the outer edge, with an aperture of 20 x 30 cm.

JAS White Core Mount Board is a 1.5mm thick acid-free mount board which weighs 850gsm. It consists of three layers: a 110gsm paper surface which is available in 16 colours; a 1.1mm thick, fully coated, bleached paperboard core which is acid free and which is considered sufficiently inert to be used in direct contact with documents; a backing layer of white chlorine- and acid-free cellulose paper.

These mountboards are not fully lightfast and should not be stored in direct sunlight, though they will display good colour-stability if stored out of direct sunlight. The front surface paper and the white paperboard core accords to ISO 6588, while the back paper accords to ISO9706. It is the back sheet, which is most fully in contact with the artwork, that has the highest archival specifications.

These pre-cut mount boards measure 24 x 30cm along the outer edge, with an aperture of 20 x 30 cm.

JAS White Core Mount Board is a 1.5mm thick acid-free mount board which weighs 850gsm. It consists of three layers: a 110gsm paper surface which is available in 16 colours; a 1.1mm thick, fully coated, bleached paperboard core which is acid free and which is considered sufficiently inert to be used in direct contact with documents; a backing layer of white chlorine- and acid-free cellulose paper.

These mountboards are not fully lightfast and should not be stored in direct sunlight, though they will display good colour-stability if stored out of direct sunlight. The front surface paper and the white paperboard core accords to ISO 6588, while the back paper accords to ISO9706. It is the back sheet, which is most fully in contact with the artwork, that has the highest archival specifications.

These pre-cut mount boards measure 24 x 30cm along the outer edge, with an aperture of 20 x 30 cm.

JAS White Core Mount Board is a 1.5mm thick acid-free mount board which weighs 850gsm. It consists of three layers: a 110gsm paper surface which is available in 16 colours; a 1.1mm thick, fully coated, bleached paperboard core which is acid free and which is considered sufficiently inert to be used in direct contact with documents; a backing layer of white chlorine- and acid-free cellulose paper.

These mountboards are not fully lightfast and should not be stored in direct sunlight, though they will display good colour-stability if stored out of direct sunlight. The front surface paper and the white paperboard core accords to ISO 6588, while the back paper accords to ISO9706. It is the back sheet, which is most fully in contact with the artwork, that has the highest archival specifications.

These pre-cut mount boards measure 24 x 30cm along the outer edge, with an aperture of 20 x 30 cm.

JAS White Core Mount Board is a 1. 5mm thick acid-free mount board which weighs 850gsm. It consists of three layers: a 110gsm paper surface which is available in 16 colours; a 1. 1mm thick, fully coated, bleached paperboard core which is acid free and which is considered sufficiently inert to be used in direct contact with documents; a backing layer of white chlorine- and acid-free cellulose paper. These mountboards are not fully lightfast and should not be stored in direct sunlight, though they will display good colour-stability if stored out of direct sunlight. The front surface paper and the white paperboard core accords to ISO 6588, while the back paper accords to ISO9706. It is the back sheet, which is most fully in contact with the artwork, that has the highest archival specifications. These pre-cut mount boards measure 30. 5 x 40. 6cm along the outer edge, with an aperture of 19 x 28cm.

JAS White Core Mount Board is a 1.5mm thick acid-free mount board which weighs 850gsm. It consists of three layers: a 110gsm paper surface which is available in 16 colours; a 1.1mm thick, fully coated, bleached paperboard core which is acid free and which is considered sufficiently inert to be used in direct contact with documents; a backing layer of white chlorine- and acid-free cellulose paper.

These mountboards are not fully lightfast and should not be stored in direct sunlight, though they will display good colour-stability if stored out of direct sunlight. The front surface paper and the white paperboard core accords to ISO 6588, while the back paper accords to ISO9706. It is the back sheet, which is most fully in contact with the artwork, that has the highest archival specifications.

These pre-cut mount boards measure 24 x 30cm along the outer edge, with an aperture of 28 x 36 cm.

JAS White Core Mount Board is a 1.5mm thick acid-free mount board which weighs 850gsm. It consists of three layers: a 110gsm paper surface which is available in 16 colours; a 1.1mm thick, fully coated, bleached paperboard core which is acid free and which is considered sufficiently inert to be used in direct contact with documents; a backing layer of white chlorine- and acid-free cellulose paper.

These mountboards are not fully lightfast and should not be stored in direct sunlight, though they will display good colour-stability if stored out of direct sunlight. The front surface paper and the white paperboard core accords to ISO 6588, while the back paper accords to ISO9706. It is the back sheet, which is most fully in contact with the artwork, that has the highest archival specifications.

These pre-cut mount boards measure 24 x 30cm along the outer edge, with an aperture of 28 x 36 cm.

This Backing board panel is 2.5mm thick and is made of MDF. It measures 20inx24in

This is a hardened nail with a friction-fit sliding collar.

It is designed for medium hard wall surfaces.

As the nail is driven in the collar stays flush with the wall surface, minimising any possible sagging of the nail.

Leave approximately. 8mm protruding to take the picture cord or wire. For pictures up to 1kg.

Please take care to ensure the nail is secure in the wall before hanging your work.

JAS White Core Mount Board is a 1.5mm thick acid-free mount board which weighs 850gsm. It consists of three layers: a 110gsm paper surface which is available in 16 colours; a 1.1mm thick, fully coated, bleached paperboard core which is acid free and which is considered sufficiently inert to be used in direct contact with documents; a backing layer of white chlorine- and acid-free cellulose paper.

These mountboards are not fully lightfast and should not be stored in direct sunlight, though they will display good colour-stability if stored out of direct sunlight. The front surface paper and the white paperboard core accords to ISO 6588, while the back paper accords to ISO9706. It is the back sheet, which is most fully in contact with the artwork, that has the highest archival specifications.

JAS White Core Mount Boards are available in 60 x 80cm sheets in the following colours: Buff, Felt Gray, Pearl, Cape Cod, Pistachio, Chamois, Porcelain, Ultra White, Biscuit, Cream, Black, Soft White, Off White, Antique White, Polar White, Extra White.

JAS White Core Mount Board is a 1.5mm thick acid-free mount board which weighs 850gsm. It consists of three layers: a 110gsm paper surface which is available in 16 colours; a 1.1mm thick, fully coated, bleached paperboard core which is acid free and which is considered sufficiently inert to be used in direct contact with documents; a backing layer of white chlorine- and acid-free cellulose paper.

These mountboards are not fully lightfast and should not be stored in direct sunlight, though they will display good colour-stability if stored out of direct sunlight. The front surface paper and the white paperboard core accords to ISO 6588, while the back paper accords to ISO9706. It is the back sheet, which is most fully in contact with the artwork, that has the highest archival specifications.

These pre-cut mount boards measure 24 x 30cm along the outer edge, with an aperture of 15 x 20 cm.

JAS White Core Mount Board is a 1.5mm thick acid-free mount board which weighs 850gsm. It consists of three layers: a 110gsm paper surface which is available in 16 colours; a 1.1mm thick, fully coated, bleached paperboard core which is acid free and which is considered sufficiently inert to be used in direct contact with documents; a backing layer of white chlorine- and acid-free cellulose paper.

These mountboards are not fully lightfast and should not be stored in direct sunlight, though they will display good colour-stability if stored out of direct sunlight. The front surface paper and the white paperboard core accords to ISO 6588, while the back paper accords to ISO9706. It is the back sheet, which is most fully in contact with the artwork, that has the highest archival specifications.

These pre-cut mount boards measure 24 x 30cm along the outer edge, with an aperture of 15 x 20 cm.

JAS White Core Mount Board is a 1.5mm thick acid-free mount board which weighs 850gsm. It consists of three layers: a 110gsm paper surface which is available in 16 colours; a 1.1mm thick, fully coated, bleached paperboard core which is acid free and which is considered sufficiently inert to be used in direct contact with documents; a backing layer of white chlorine- and acid-free cellulose paper.

These mountboards are not fully lightfast and should not be stored in direct sunlight, though they will display good colour-stability if stored out of direct sunlight. The front surface paper and the white paperboard core accords to ISO 6588, while the back paper accords to ISO9706. It is the back sheet, which is most fully in contact with the artwork, that has the highest archival specifications.

These pre-cut mount boards measure 24 x 30cm along the outer edge, with an aperture of 15 x 20 cm.

JAS White Core Mount Board is a 1.5mm thick acid-free mount board which weighs 850gsm. It consists of three layers: a 110gsm paper surface which is available in 16 colours; a 1.1mm thick, fully coated, bleached paperboard core which is acid free and which is considered sufficiently inert to be used in direct contact with documents; a backing layer of white chlorine- and acid-free cellulose paper.

These mountboards are not fully lightfast and should not be stored in direct sunlight, though they will display good colour-stability if stored out of direct sunlight. The front surface paper and the white paperboard core accords to ISO 6588, while the back paper accords to ISO9706. It is the back sheet, which is most fully in contact with the artwork, that has the highest archival specifications.

These pre-cut mount boards measure 24 x 30cm along the outer edge, with an aperture of 15 x 20 cm.

JAS White Core Mount Board is a 1.5mm thick acid-free mount board which weighs 850gsm. It consists of three layers: a 110gsm paper surface which is available in 16 colours; a 1.1mm thick, fully coated, bleached paperboard core which is acid free and which is considered sufficiently inert to be used in direct contact with documents; a backing layer of white chlorine- and acid-free cellulose paper.

These mountboards are not fully lightfast and should not be stored in direct sunlight, though they will display good colour-stability if stored out of direct sunlight. The front surface paper and the white paperboard core accords to ISO 6588, while the back paper accords to ISO9706. It is the back sheet, which is most fully in contact with the artwork, that has the highest archival specifications.

These pre-cut mount boards measure 24 x 30cm along the outer edge, with an aperture of 24 x 34 cm.

JAS White Core Mount Board is a 1.5mm thick acid-free mount board which weighs 850gsm. It consists of three layers: a 110gsm paper surface which is available in 16 colours; a 1.1mm thick, fully coated, bleached paperboard core which is acid free and which is considered sufficiently inert to be used in direct contact with documents; a backing layer of white chlorine- and acid-free cellulose paper.

These mountboards are not fully lightfast and should not be stored in direct sunlight, though they will display good colour-stability if stored out of direct sunlight. The front surface paper and the white paperboard core accords to ISO 6588, while the back paper accords to ISO9706. It is the back sheet, which is most fully in contact with the artwork, that has the highest archival specifications.

These pre-cut mount boards measure 24 x 30cm along the outer edge, with an aperture of 28 x 36 cm.

The Logan Rigid inserts affix the canvas to the frame more firmly than the flexible inserts, requiring the insert to be removed from the frame if you wish to take out the canvas.

These inserts need to be applied in conjunction with the Logan Dual Point Driver F500-2.
                      
Model numbers, compatible point drivers and quantities

• Logan F9 > 400 x Multipoint Insert - Fits F400-1
• Logan F10 > 400 x Rigid Insert - Fits F400-1     
• Logan F11 > 400 x Flexible Insert - Fits F400-1     
• Logan F12 > 300 x Brad Nails - Fits F400-1
• Logan F53 > 600 x Flexible Point Strips - Fits F500-2
• Logan F54 > 600 x Rigid Point Strips - Fits F500-2     
• Logan F55 > 2500 x Flexible Point Strips - Fits F500-2     
• Logan F56 > 2500 x Rigid Point Strips - Fits F500-2

Cut perfect straight edges on any depth of foamboard from 1/8" to 1/2". FoamWerks Straight Cutter features adjustable blade depth, quick change blade clip, magnetic blade slot, on-board blade storage drawer and five blades. Use replacement blades WC-5, WC-20 or WC-50.

Daler Rowney Studland Mountboards feature a clean bevel cut and lasting quality, with a neutral pH surface. The surface paper, core, and backing are specially treated to minimise the effect of atmospheric pollutants and to enhance their lifespan. Approx. Size: A1; 23-3/8 x 33-1/8in; 594 x 841mm. 1. 4mm thickness. Size may vary slightly.

Daler Rowney Studland Mountboards feature a clean bevel cut and lasting quality, with a neutral pH surface. The surface paper, core, and backing are specially treated to minimise the effect of atmospheric pollutants and to enhance their lifespan. Approx. Size: A1; 23-3/8 x 33-1/8in; 594 x 841mm. 1. 4mm thickness. Size may vary slightly.

The Deluxe Pull Style is Logan's most advanced handheld mat cutter, including features developed and refined by Logan since 1974. The Deluxe Pull Style includes a marker bar system for faster marking, a pivot-and-pull blade, and an ergonomic handle. The blade slot prevents blade flex, resulting in straighter cuts. A start-and-stop indicator helps to eliminate overcuts. New ergonomic knob for comfortable operation. Can upgrade for use on the Adapt-A-Rule straight edge and Compact or Simplex board mounted mat cutting systems. Uses Logan 270 blade.

This practical combo system includes a straight edge and a Logan Handheld Mat Cutter for accurate, high quality mat cutting. Just mark your borders using the rulered straight edge, attach the cutting head, and cut from line to line. All models include a nonslip rubberized base, ruled straight edge and Logan Handheld Mat Cutter. Can also be used with Glass Cutter or Straight Cutter. youtube=fAwzffTesfE pdf=f4241.pdf - Team System Plus Instruction Manual

Logan 524, 540, & 560: Adapt-A-RuleUse your Logan Handheld Mat Cutter, Straight Cutter, Glass Cutter, or Mat Knife to an Adapt-A-Rule cutting guide and enjoy straighter, faster, more accurate cuts. The 24" (61cm) and 40" (101cm) models include a non-slip rubberized base and US or metric ruled guides. The unruled 60" (152cm) model includes a C-clamp. All models include an Upgrade Kit allowing modification of your Logan Handheld Mat Cutter. pdf=f524.pdf - Logan Adapt-A-Rule Instructions

Economy and versatility combine in the FoamWerks Foamboard Straight/Bevel Cutter. Simply rotate the angled base block and Model WC-6010 transforms from a straight cutter to a bevel cutter. Features include adjustable blade depth, ergonomic handle and on-board blade storage. The Straight/Bevel Cutter works with 3/16" foam board. The Straight/Bevel Cutter includes two blades and can be used with any suitable straight edge. Use replacement blades WC-5, WC-20 or WC-50.

Daler Rowney Studland Mountboards feature a clean bevel cut and lasting quality, with a neutral pH surface. The surface paper, core, and backing are specially treated to minimise the effect of atmospheric pollutants and to enhance their lifespan. Approx. Size: A1; 23-3/8 x 33-1/8in; 594 x 841mm. 1. 4mm thickness. Size may vary slightly.