Employee-Driven Systems for Safe Behavior Throughout the reign of Total Quality Management (TQM), the author and his associates pioneered and field-tested a behavior-based approach to continuous safety improvement. Strong on fundamentals, Employee-Driven Systems for Safe Behavior shows how leading companies have applied TQM in safety since the mid-1980s. This book was written for all safety professionals dedicated to accident prevention and presents the methods used by more than 130 companies to achieve continuous improvement in their safety performance. Part One The Safety/Quality Connection provides an overview of the behavioral theory at the foundation of this approach. Part Two Methods for Continuous Improvement in Safety introduces key procedures and instruments of the behavior- based approach to safety, such as the inventory of critical safety-related behaviors, peer-to-peer observation and feedback, and statistical analysis of behavioral data. Part Three Current Issues in Behavior-Based Safety presents issues in behavioral management including ergonomics, employee selection, and incident investigation. Part Four Results and Case Histories profiles case histories of implementations at companies such as Monsanto, Chevron, and PPG Industries, Inc. The material presented in Employee-Driven Systems for Safe Behavior was developed by the author and his colleagues in hundreds of conference and training sessions with safety professionals, managers, and wage-roll personnel from companies across all industries and regions of the U.S. and Canada, and in Australia, Jamaica, and Britain.

The Aboveground Steel Storage Tank Handbook I like the summary of regulations in conjunction with industry standards and products. Usually a book covers one or the other. —Wayne Geyer, Executive Vice-President, Steel Tank Institute I think this is a valuable text in that it does a very good job presenting the two types of ASTs. —Darryl J. Butkos, Hydrogeologist and Environmental Engineer The U.S. aboveground storage tank (AST) market will approach $2.0 billion in 1995 and has an annual growth rate of approximately 5 percent. Shop-built ASTs have proliferated over the last 10 years and are replacing the underground tanks that have caused a large percentage of groundwater contamination. Larger field-erected tanks are now found at almost every industrial facility because of their greater reliability and the lessened risk of environmental spills. The Aboveground Steel Storage Tank Handbook discusses the myriad of regulations, codes, and manufacturing standards and shows how they are intertwined. It is the first handbook on aboveground storage tanks that explains the unique differences between field-erected ASTs and shop-built ASTs. The authors have divided the Handbook into four easy-to-understand sections: Markets, Regulations, Standards, and Products. Anyone who finds himself or herself working through the maze of the AST compliance paperwork will find this book to be a great benefit as a single-source reference guide.

The near meltdown in 1979 at Three Mile Island, America, plunged the nuclear power industry into a crisis of confidence that threatened its very existence. This work analyzes how the industry managed to stabilize itself through a complete transformation in the safety standards, operation and management of nuclear facilities in America. After describing the poor quality of safety before disaster shook the industry into action, the book documents the emergence of the Institute of Nuclear Power Operations (INPO) and reveals how this industry organization became a major force behind improvements in nuclear safety. In his account of INPO's beginnings and its functions, the author shows how, contrary to conventional wisdom, industry self-regulation can be remarkably effective. For Rees, what happened for the nuclear power industry suggests a new form of regulation - communitarian regulation - that has important implications for the role of private and public control of other key industries.

The Rise of Smart Cities: Advanced Structural Sensing and Monitoring Systems provides engineers and researchers with a guide to the latest breakthroughs in the deployment of smart sensing and monitoring technologies. The book introduces readers to the latest innovations in the area of smart infrastructure-enabling technologies and how they can be integrated into the planning and design of smart cities. With this book in hand, readers will find a valuable reference in terms of civil infrastructure health monitoring, advanced sensor network architectures, smart sensing materials, multifunctional material and structures, crowdsourced/social sensing, remote sensing and aerial sensing, and advanced computation in sensor networks.

At last, a book that covers safety procedures and standards with information that is rarely available outside of proprietary materials. A comprehensive source for basic and essential operations and procedures in use in any facility, the book offers chemical operators and first line supervisors guidance in applying appropriate practices to prevent accidents, and suggests which practices to avoid.

Provides a clear road map to instilling a culture of safety excellence in any organization

Did you know that accidental injury is among the top ten leading causes of death in every age group? With this book as your guide, you'll learn how to help your organization develop, implement, and sustain Safety Culture Excellence, vital for the protection of and improvement in the quality of life for everyone who works there.

"STEPS to Safety Culture Excellence" is based on the authors' firsthand experience working with international organizations in every major industry that have successfully developed and implemented ongoing cultures of safety excellence. Whether your organization is a small regional firm or a large multinational corporation, you'll find that the STEPS process enables you to instill Safety Culture Excellence within your organization.

STEPS (Strategic Targets for Excellent Performance in Safety) demystifies the process of developing Safety Culture Excellence by breaking it down into small logical, internally led tasks. You'll be guided through a sequence of STEPS that makes it possible to: Create a culture of excellence that is reinforced and empowered at every levelDevelop the capability within the culture to identify, prioritize, and solve safety problems and challengesMaintain and continuously improve the performance of your organization's safety culture

Although this book is dedicated to safety, the tested and proven STEPS process can be used to promote excellence in any aspect of organizational performance.

By optimizing the safety culture in your organization, you will give the people you work with the skills and knowledge to not only minimize the risk of an on-the-job accident, but also to lead safe, healthy lives outside of work.

Today's complex industrial plants can pose many risks of fire, explosions, and other hazardous incidents if proper safety mechanisms are not in place. Of particular concern are accidental gaseous emissions that jeopardize the health of workers and the facility itself. This guide explains the latest engineering and administrative options available for avoiding and controlling accidents, including how to set up reliable systems for preventing and mitigating accidental releases as well as how to evaluate the performance of these systems.

Noise Control Management presents a system-wide management approach to the many noise-related problems that plague industrial settings. Students learn how to define noise problems and determine the feasibility of mitigating them. The text shows how to identify noise sources and set up priorities for dealing with the problems these sources create. Coverage includes a full range of noise control devices, from quiet equipment to barriers, enclosures, silencers, and other devices.

Traditional and Novel Adsorbents for Antibiotics Removal from Wastewater describes, in detail, the importance of removing antibiotics from aqueous systems, along with new information on their variation, solubility, toxicology and allowable concentration in groundwater. The book covers adsorption as an applicable method, highlighting its advantages and disadvantages. It investigates various adsorbents ranging from traditional activated carbons, modified forms of clays, metal oxides, polymer resins, and more advanced materials such as graphene-based, MOF, nano-matrices, and composite materials as potential sorbents for the adsorption of antibiotics from aqueous solutions. In addition, the book covers biological microorganisms that have been used to remove antibiotics from wastewater and presents biopolymers, biowaste and living cells potentially and practically suitable for this purpose. For all adsorbents, the book explains preparation methods, main properties, modification techniques to increase antibiotic removal efficiency, mechanisms in antibiotic removal, advantages and limitations. It also presents adsorption-desorption in batch and continuous mode, optimized operating parameters, kinetic and equilibrium adsorption, and regeneration studies.

This is a book for engineers that covers the hardware and software aspects of high-reliability safety systems, safety instrumentation and shutdown systems as well as risk assessment techniques and the wider spectrum of industrial safety. Rather than another book on the discipline of safety engineering, this is a thoroughly practical guide to the procedures and technology of safety in control and plant engineering. This highly practical book focuses on efficiently implementing and assessing hazard studies, designing and applying international safety practices and techniques, and ensuring high reliability in the safety and emergency shutdown of systems in your plant.
This book will provide the reader with the most up-to-date standards for and information on each stage of the safety life cycle from the initial evaluation of hazards through to the detailed engineering and maintenance of safety instrumented systems. It will help them develop the ability to plan hazard and risk assessment studies, then design and implement and operate the safety systems and maintain and evaluate them to ensure high reliability. Finally it will give the reader the knowledge to help prevent the massive devastation and destruction that can be caused by today's highly technical computer controlled industrial environments.
* Helps readers develop the ability to plan hazard and risk assessment studies, then design, implement and operate the safety systems and maintain and evaluate them to ensure high reliability
* Gives the reader the knowledge to help prevent the massive devastation that can be caused by today's highly technical computer controlled industrial environments
* Rather than another book on the discipline of safety engineering, this is a thoroughly practical guide to the procedures and technology of safety in control and plant engineering

Air Pollution, Climate and Health integrates the current understanding of the issues of air pollution, climate change and human health. The book provides a comprehensive overview of these issues to help readers gain a better understanding of how they interact and impact air quality and public health. Regional examples from across the globe include issues related to PM 2.5, haze, winter pollution, heat related mortality and aerosols. These issues are addressed utilizing current research and laboratory-based, observation-based, and modeling-based analysis. This is an essential resource for all professionals investigating the impacts of climate change or air pollution on human health.

Overpressure Protection in the Process Industry: A Critical View provides a practical and pragmatic guidance for anyone dealing with overpressure protection in the process industry. The book explains the background of complicated international codes and regulations, offering a pragmatic and practical approach on how these codes can be interpreted for specific cases. The book also gives a critical view on these codes and regulations and where they do or don't make sense, along with the challenges in some instances, including technical and practical argumentations. Finally, the book covers specific problem areas and sizing methods when using safety relief devices as overpressure protection, such as how to handle installation, backpressures, blowdowns, the 3% rule, types of chatter and other destructive forces in relief devices.

This book helps advance process safety in a key area of interest. Currently, no literature exists which is solely dedicated to process safety for the bioprocessing industry. There are texts, guidelines, and standards on biosafety at the laboratory level and for industrial hygiene, but no guidelines for large-scale production facilities. In fact, biosafety is largely defined as a field that promotes safe laboratory practices, procedures and use of containment equipment and facilities. Additionally, biomedical engineers, biologists, or other professionals without chemical engineering training or knowledge of inherently safe design are designing many of these facilities.

Working from an engineering approach based on fundamental concepts, this book explores the design and function of industrial ventilation systems. It describes a systematic approach to protecting worker health through reducing airborne hazards. The approach is based on first principles and engineering fundamentals and includes the usual empirically-based considerations. Problem sets are provided.

Herbs and spices are among the most versatile and widely used ingredients in food processing. As well as their traditional role in flavouring and colouring foods, they have been increasingly used as natural preservatives and for their potential health-promoting properties, for example as antioxidants. Edited by a leading authority in the field, and with a distinguished international team of contributors, the Handbook of herbs and spices provides an essential reference for manufacturers wishing to make the most of these important ingredients.
The first group of chapters looks at general issues including quality indices for conventional and organically produced herbs, spices and their essential oils.
The main body of the handbook consists of over twenty chapters covering key spices and herbs from aniseed, bay leaves and black pepper to saffron, tamarind and turmeric. Each chapter covers key issues from definition and classification including: chemical structurecultivationpost-harvest processinguses in food processingfunctional propertiesquality indicesmethods of analysisThe Handbook of herbs and spices is a standard reference for all manufacturers using herbs and spices in their products.

Today, hazardous work kills 2.3 million people each year and injures millions more. Among the most compelling yet controversial forms of legal protection for workers is the right to refuse unsafe work. The rise of globalization, precarious work, neoliberal politics, attacks on unions, and the idea of individual employment rights have challenged the protection of occupational health and safety for workers worldwide. In Hazard or Hardship, Jeffrey Hilgert presents the protection of refusal rights as a moral and a human rights question.

Hilgert finds that the protection of the right to refuse unsafe work, as constituted under international labor standards, is a failure and calls for a reexamination of worker health and safety policy from the ground up. The current model of protection follows an individual employment rights framework, which fails to protect workers against the inherent social inequalities within the employment relationship. To adequately protect the right to refuse as a human right, both in North America and around the world, Hilgert argues that a broader protection must be granted under a freedom of association framework. Hazard or Hardship will be a welcome resource for labor and environmental activists, trade union leaders, labor lawyers and labor law scholars, industrial relations experts, human rights advocates, public health professionals, and specialists in occupational safety and health.

This book gathers cutting-edge research and best practices relating to occupational risk and safety management, healthcare and ergonomics. It covers strategies for different types of industry, such as construction, food, chemical and healthcare. It gives a special emphasis on challenges posed by automation, discussing solutions offered by technologies, and reporting on case studies carried out in different countries. Chapters are based on selected contributions to the 17th International Symposium on Occupational Safety and Hygiene (SHO 2021), held virtually on November 17-19, 2021, from Portugal. By reporting on different perspectives, such as the ones from managers, workers and OSH professionals, and covering timely issues, such as safety evaluation of human-robot collaboration, this book offers extensive information and a source of inspiration to OSH researchers, practitioners and organizations operating in both local and global contexts.

New third edition! This classic art reference shows artists how to handle materials safely while practicing their craft. Dozens of at-a-glance tables and charts present vital information about art materials, ingredients, technical hazards, proper protective equipment, and safe work practices simply and accurately. This brand-new third edition is now completely revised and expanded to detail lifesaving new safety and ventilation equipment, present urgent new discoveries on toxins and pollutants found in arts and crafts materials, and explain the controversies surrounding new government regulations. A virtual lifesaver for all art and craft workers.

The food industry faces an unprecedented level of scrutiny. Consumers are not only concerned with the safety and quality of food products but also the way in which they are produced. At the same time the food industry has developed new ways of assuring appropriate standards for its products and their methods of production, developing systems such as TQM and HACCP to identify and manage key steps in production. These new methods require new skills in auditing. Auditing in the food industry provides an authoritative guide to the range of standards and the auditing skills they demand.
Part one sets the scene with an introductory chapter reviewing developments in standards affecting the food industry. There then follows chapters on how retailers audit their suppliers and how governments have moved from a traditional inspection role to one of 'regulatory verification' with its emphasis on auditing the robustness of a business's own systems for managing safety and quality.
Part two examines the key aspects of safety and quality. A first chapter reviews the ways retailers assess supplier HACCP systems. There is then a chapter reviewing TQM systems that provides a context for a discussion of auditing techniques for HACCP-based quality systems. A final chapter looks at standards governing the analytical methods used in safety and quality control.
Part three considers newer standards that are becoming increasingly important in the food industry. There are chapters on benchmarking an organisation against others as a way of improving performance, auditing the impact of food processing operations on the environment and auditing organic food processing.
Auditing in the food industry is a valuable guide to the range of standards facing the food industry and the ways it can audit, and thus improve the quality of its performance.

This volume provides extensive health (toxicological) and safety handling information and data on over 1,000 chemicals of commercial and industrial importance.
This volume will provide extensive health (toxicological) and safe-handling information and data on more than 1000 chemicals of commercial and industrial importance. It provides chemical specific information pertinent to safe handling and transportation of chemicals, worker protection, emergency response information to address spills, explosions on fire situations, and chemical stability/reactivity data. It is designed as a standard reference handbook for chemical engineers, safety engineers, toxicologists, fire safety specialists, chemists, laboratory and plant technicians.
Provides extensive health and safe-handling information on more than 1,000
Standard reference work for those involved in chemical engineering and related fields

Work-related disability is an increasingly important issue to organizations, in terms of cost, competitiveness, and social and ethical issues. Changes in the nature of disability arising from the evolution of work calls for a new approach to this understudied topic. Significant developments have taken place in linking injury events with subsequent primary prevention efforts, in engaging key stakeholders in effective pre-injury prevention and post-injury disability management efforts, and in exploring company-level interventions, regulatory interventions, and economic incentives. These issues are examined and brought together to form a unique, evidence-based, state-of-the-art research work revealing what works best in preventing workplace disability. Preventing and Managing Disabling Injury at Work examines the changing nature of the workplace and work force, and includes the newest information on effective early and staged multi-modal interventions in the workplace. The text also explores psychological risk perception, and the essential linking of the workplace, clinician, insurer, and worker in the recovery process and in the prevention of subsequent disability events. This volume assembles a group of active researchers in the field of work-related disability from North America and Australia, many of whom manage interactive programs of work through HealNet, a health research network funded by Industry Canada. Well-illustrated with case studies and practical examples, much of the book focuses on the common musculoskeletal disabilities and 'regional disorders' along with other broader applications.

Pressurized Heavy Water Reactors: CANDU, the seventh volume in the JSME Series on Thermal and Nuclear Power Generation series, provides a comprehensive and complete review of a single type of reactor in a very accessible and practical way. The book presents the full lifecycle, from design and manufacturing to operation and maintenance, also covering fitness-for-service and long-term operation. It does not relate to any specific vendor-based technology, but rather provides a broad overview of the latest technologies from a variety of active locations which will be of great value to countries invested in developing their own nuclear programs. Including contemporary capabilities and challenges of nuclear technology, the book offers practical solutions to common problems faced, along with the safe and approved processes to reach suitable solutions. Professionals involved in nuclear power plant lifecycle assessment and researchers interested in the development and improvement of nuclear energy technologies will gain a deep understanding of PHWR nuclear reactor physics, chemistry and thermal-hydraulic properties.

Pressurized Heavy Water Reactors: Atucha-II, the eighth volume in the JSME Series on Thermal and Nuclear Power Generation, provides a comprehensive and complete review of a single type of reactor in a very accessible and practical way. The book presents a close analysis of the Atucha reactor, covering reactor physics, aging management of major components, and the role of codes in PHWR and Nuclear Regulation and Licensing. Including contemporary capabilities and challenges of nuclear technology, the book offers solutions and advice on common problems faced, guiding the reader through safe and approved processes that will help them reach suitable solutions. Professionals involved in lifecycle assessments and researchers interested in the development and improvement of nuclear energy technologies will gain a deep understanding of PHWR nuclear reactor physics, design and licensing.

Provides knowledge, understanding and guidance to the detailed and complex requirements of health and safety legislation as applied to the construction industry. This book provides the knowledge, understanding and guidance to the CDM regulations that students in particular will need when they start working in the industry. It links in with the CIOB Education Framework at levels 2 and 3.