Easy to use, as you paint straight from the liner. Ideal for almost any surface, from paper, wood, metal, glass, leather, plastic, fabrics (wash-resistant up to 40°C after fixing), etc.

Working Guidelines for Marabu-Metallic Liner and Glitter LinerEnsure that the surface is clean and dust-free. Drying time approx. 6 hours depending on colour application. For fabrics (cotton and blended textiles up to a maximum of 20 % synthetic fibres), wash out finishing and softening agents. Gently push liner tip onto the fabric and squeeze. After drying, iron each painted area for 3 min. on cotton setting with a thin cloth over the surface. Iron for 3 min. per 30 cm. Can also be fixed in a pre-heated oven (8 min. / 150°C). Test substrate for heat resistance first. Then wash-resistant up to 40°C. Wash and iron inside out.

Easy to use, as you paint straight from the liner. Ideal for almost any surface, from paper, wood, metal, glass, leather, plastic, fabrics (wash-resistant up to 40°C after fixing), etc.

Working Guidelines for Marabu-Metallic Liner and Glitter LinerEnsure that the surface is clean and dust-free. Drying time approx. 6 hours depending on colour application. For fabrics (cotton and blended textiles up to a maximum of 20 % synthetic fibres), wash out finishing and softening agents. Gently push liner tip onto the fabric and squeeze. After drying, iron each painted area for 3 min. on cotton setting with a thin cloth over the surface. Iron for 3 min. per 30 cm. Can also be fixed in a pre-heated oven (8 min. / 150°C). Test substrate for heat resistance first. Then wash-resistant up to 40°C. Wash and iron inside out.

A water-based fabric pen for school, hobby, leisure use. The pen is suitable for almost all light-coloured, non-finished textiles free of dressing.After fixing, Marabu-Textil Painter is light-fast, wash-resistant up to 60°C and has a soft feel. The pen is equipped with a capillary system, so activation is not necessary.Marabu-Textil Painters are available in two tip widths and can be used in perfect combination with Marabu-Textil. When used as an outline pen, it can be combined with Marabu-Textil and Textil plus (please follow the fixing instructions carefully); the dark shades are even suitable for painting over Textil and Textil plus.

The Porcelain Painter Range offers shades within a colour system. Basic and fashion colours can be always combined with the corresponding Metallic and Glitter shades. Whether tastefully colour-matched creations or extravagant colour combinations are desired – everything is possible with the wide colour range from Marabu. Various kinds of painting techniques can be easily achieved with the painters.Porcelain Painters are offered in 4 different tip shapes/sizes: from large paint applications with the brush tip, fine painting with the outline & Fineliner tip and decorative writing with the calligraphy tip. The universal tip with a tip width of 1-2 mm is used as a practical all-rounder: it is ideal for painting and writing.

Paint, allow to dry (3 days), then it's finished

Dishwasher-safe without oven fixing (maximum 50°C)

Paint tips: calligraphy, brush, Fineliner and universal tip

Water based, odourless, lightfast. For children from 6 years on

Application:Clean the crockery with a scouring agent and a small sponge before painting. Afterwards it should be wiped with Marabu-Cleaner or White Spirit so that it is dust and grease-free. Before use, shake the painters well with the cap closed. Press onto the tip repeatedly until the ink is visible in it (do not continue once the ink appears in the tip as this may overload it). Try using the painter on a piece of scrap paper first (not on the object to be painted until you are sure the flow is smooth). Draw free-hand outlines with the outline painter or copy the motif using carbon paper. For this, put the tracing paper on the paper design of the motif, fix with masking tape on the crockery and go over the motif using a pencil while putting sufficient pressure on it to trace the drawing. Allow the outlines to dry briefly, then paint the motif with the chosen colours. Decorate the design with letters (e.g. name) just as you like. Allow the painted porcelain to dry for 3 days. Now everything is dishwashersafe at a maximum 50°C. After use, close the cap well (until it clicks). Store in a horizontal position.

The Porcelain Painter Range offers shades within a colour system. Basic and fashion colours can be always combined with the corresponding Metallic and Glitter shades. Whether tastefully colour-matched creations or extravagant colour combinations are desired – everything is possible with the wide colour range from Marabu. Various kinds of painting techniques can be easily achieved with the painters.Porcelain Painters are offered in 4 different tip shapes/sizes: from large paint applications with the brush tip, fine painting with the outline & Fineliner tip and decorative writing with the calligraphy tip. The universal tip with a tip width of 1-2 mm is used as a practical all-rounder: it is ideal for painting and writing.

Paint, allow to dry (3 days), then it's finished

Dishwasher-safe without oven fixing (maximum 50°C)

Paint tips: calligraphy, brush, Fineliner and universal tip

Water based, odourless, lightfast. For children from 6 years on

Application:Clean the crockery with a scouring agent and a small sponge before painting. Afterwards it should be wiped with Marabu-Cleaner or White Spirit so that it is dust and grease-free. Before use, shake the painters well with the cap closed. Press onto the tip repeatedly until the ink is visible in it (do not continue once the ink appears in the tip as this may overload it). Try using the painter on a piece of scrap paper first (not on the object to be painted until you are sure the flow is smooth). Draw free-hand outlines with the outline painter or copy the motif using carbon paper. For this, put the tracing paper on the paper design of the motif, fix with masking tape on the crockery and go over the motif using a pencil while putting sufficient pressure on it to trace the drawing. Allow the outlines to dry briefly, then paint the motif with the chosen colours. Decorate the design with letters (e.g. name) just as you like. Allow the painted porcelain to dry for 3 days. Now everything is dishwashersafe at a maximum 50°C. After use, close the cap well (until it clicks). Store in a horizontal position.

The Porcelain Painter Range offers shades within a colour system. Basic and fashion colours can be always combined with the corresponding Metallic and Glitter shades.
Whether tastefully colour-matched creations or extravagant colour combinations are desired – everything is possible with the wide colour range from Marabu.
Various kinds of painting techniques can be easily achieved with the painters.

Porcelain Painters are offered in 4 different tip shapes/sizes: from large paint applications with the brush tip, fine painting with the outline & Fineliner tip and decorative writing with the calligraphy tip.
The universal tip with a tip width of 1-2 mm is used as a practical all-rounder: it is ideal for painting and writing.

Note: Despite manufacturer claims, products painted with this pen require baking for the paint to set.

Roberson Liquid Metals have a rich deep colour and are ideal for a range of applications and surfaces. All colours are intermixable and can be used on surfaces such as plaster, wood, paper & canvas. The paint gives the appearance of metal but will not tarnish and is not required to be varnished.

Roberson Liquid Metals are creamy acrylic colours that can be used on most surfaces including plaster, wood, paper & canvas. The rich, deep colour gives the appearance of metal but it will not tarnish and is not required to be varnished.

The 24 colour range includes 13 shades of gold, brass and bronze; eight shades of silver, pewter and platinum; a steel, a graphite and an interference, glittery colour (called Twinkle).
All colours are intermixable with each other and other acrylic paints. When mixed they add both their colour and their sparkle to other acrylic paints.

The colours are all transparent but in thicker applications they can cover quite well. The paints can be thinned with water and as the paint becomes more transparent the metallic shimmer is still visible. Clean up is with soap and water. If you intend to paint large things, the pots list the paint’s coverage as: 7 square metres per litre

Speciality Colours
Two of the 24 colour range are slightly different to the rest and have slightly different prices:

Twinkle: This variation of liquid metals produces colour changing effects with a hint of glitter. The use of different backgrounds will change the effects, for example dark backgrounds will show the glitter properties whereas light backgrounds provide a colour changing effect dependant on angle of view. It can be added to other colours to create a range of interesting effects.

Solid Silver: This variation of Liquid Metals differs from other silver shades within the range as it contains aluminium particles – this makes the liquid metal more opaque to provide excellent coverage.

Colourist Heat Transfer Paints allow you to create multi-coloured designs without specialist equipment. Using just a domestic iron you can print onto fabric, bags, Tshirts, coasters, placemats, bunting, tiles, jigsaws, Christmas decorations and many other items. You can use different painting techniques such as stamping, cut-outs and stencilling.Colourist Heat Transfer Paints should be printed onto 100% synthetic surfaces for the most vibrant, colourfast effects. Use polyester or acrylic for the best results. Mixed fibres can be used - the higher the synthetic content, the stronger the printed colours will be.

Colourist Heat Transfer Paints allow you to create multi-coloured designs without specialist equipment. Using just a domestic iron you can print onto fabric, bags, Tshirts, coasters, placemats, bunting, tiles, jigsaws, Christmas decorations and many other items. You can use different painting techniques such as stamping, cut-outs and stencilling.Colourist Heat Transfer Paints should be printed onto 100% synthetic surfaces for the most vibrant, colourfast effects. Use polyester or acrylic for the best results. Mixed fibres can be used - the higher the synthetic content, the stronger the printed colours will be.

The Porcelain Painter Range offers shades within a colour system. Basic and fashion colours can be always combined with the corresponding Metallic and Glitter shades.
Whether tastefully colour-matched creations or extravagant colour combinations are desired – everything is possible with the wide colour range from Marabu.
Various kinds of painting techniques can be easily achieved with the painters.

Porcelain Painters are offered in 4 different tip shapes/sizes: from large paint applications with the brush tip, fine painting with the outline & Fineliner tip and decorative writing with the calligraphy tip.
The universal tip with a tip width of 1-2 mm is used as a practical all-rounder: it is ideal for painting and writing.

Note: Despite manufacturer claims, products painted with this pen require baking for the paint to set.

Colourist Heat Transfer Paints allow you to create multi-coloured designs without specialist equipment. Using just a domestic iron you can print onto fabric, bags, Tshirts, coasters, placemats, bunting, tiles, jigsaws, Christmas decorations and many other items. You can use different painting techniques such as stamping, cut-outs and stencilling.Colourist Heat Transfer Paints should be printed onto 100% synthetic surfaces for the most vibrant, colourfast effects. Use polyester or acrylic for the best results. Mixed fibres can be used - the higher the synthetic content, the stronger the printed colours will be.

Colourist Heat Transfer Paints allow you to create multi-coloured designs without specialist equipment. Using just a domestic iron you can print onto fabric, bags, Tshirts, coasters, placemats, bunting, tiles, jigsaws, Christmas decorations and many other items. You can use different painting techniques such as stamping, cut-outs and stencilling.Colourist Heat Transfer Paints should be printed onto 100% synthetic surfaces for the most vibrant, colourfast effects. Use polyester or acrylic for the best results. Mixed fibres can be used - the higher the synthetic content, the stronger the printed colours will be.

Fleur Designer’s Paint has the unusual trait of being gorgeous, intense, rich colour that also is extremely matte. This is because the silicates and fine minerals contained with in it refract and diffuse light making it completely different from traditional acrylics.

The Porcelain Painter Range offers shades within a colour system. Basic and fashion colours can be always combined with the corresponding Metallic and Glitter shades.
Whether tastefully colour-matched creations or extravagant colour combinations are desired – everything is possible with the wide colour range from Marabu.
Various kinds of painting techniques can be easily achieved with the painters.

Porcelain Painters are offered in 4 different tip shapes/sizes: from large paint applications with the brush tip, fine painting with the outline & Fineliner tip and decorative writing with the calligraphy tip.
The universal tip with a tip width of 1-2 mm is used as a practical all-rounder: it is ideal for painting and writing.

Note: Despite manufacturer claims, products painted with this pen require baking for the paint to set.

Colourist Heat Transfer Paints allow you to create multi-coloured designs without specialist equipment. Using just a domestic iron you can print onto fabric, bags, Tshirts, coasters, placemats, bunting, tiles, jigsaws, Christmas decorations and many other items. You can use different painting techniques such as stamping, cut-outs and stencilling.Colourist Heat Transfer Paints should be printed onto 100% synthetic surfaces for the most vibrant, colourfast effects. Use polyester or acrylic for the best results. Mixed fibres can be used - the higher the synthetic content, the stronger the printed colours will be.

The Porcelain Painter Range offers shades within a colour system. Basic and fashion colours can be always combined with the corresponding Metallic and Glitter shades.
Whether tastefully colour-matched creations or extravagant colour combinations are desired – everything is possible with the wide colour range from Marabu.
Various kinds of painting techniques can be easily achieved with the painters.

Porcelain Painters are offered in 4 different tip shapes/sizes: from large paint applications with the brush tip, fine painting with the outline & Fineliner tip and decorative writing with the calligraphy tip.
The universal tip with a tip width of 1-2 mm is used as a practical all-rounder: it is ideal for painting and writing.

Note: Despite manufacturer claims, products painted with this pen require baking for the paint to set.

This delicate touch of pink can evoke the French eighteenth century and the importance of details. Sophisticated and lightweight, it emphasises the grace of a more refined interior or work.

Fleur Designer’s Paint has the unusual trait of being gorgeous, intense, rich colour that also is extremely matte. This is because the silicates and fine minerals contained with in it refract and diffuse light making it completely different from traditional acrylics.

The Porcelain Painter Range offers shades within a colour system. Basic and fashion colours can be always combined with the corresponding Metallic and Glitter shades.
Whether tastefully colour-matched creations or extravagant colour combinations are desired – everything is possible with the wide colour range from Marabu.
Various kinds of painting techniques can be easily achieved with the painters.

Porcelain Painters are offered in 4 different tip shapes/sizes: from large paint applications with the brush tip, fine painting with the outline & Fineliner tip and decorative writing with the calligraphy tip.
The universal tip with a tip width of 1-2 mm is used as a practical all-rounder: it is ideal for painting and writing.

Note: Despite manufacturer claims, products painted with this pen require baking for the paint to set.

Easy to use, as you paint straight from the liner. Ideal for almost any surface, from paper, wood, metal, glass, leather, plastic, fabrics (wash-resistant up to 40°C after fixing), etc.

Working Guidelines for Marabu-Metallic Liner and Glitter LinerEnsure that the surface is clean and dust-free. Drying time approx. 6 hours depending on colour application. For fabrics (cotton and blended textiles up to a maximum of 20 % synthetic fibres), wash out finishing and softening agents. Gently push liner tip onto the fabric and squeeze. After drying, iron each painted area for 3 min. on cotton setting with a thin cloth over the surface. Iron for 3 min. per 30 cm. Can also be fixed in a pre-heated oven (8 min. / 150°C). Test substrate for heat resistance first. Then wash-resistant up to 40°C. Wash and iron inside out.

Colourist Heat Transfer Paints allow you to create multi-coloured designs without specialist equipment. Using just a domestic iron you can print onto fabric, bags, Tshirts, coasters, placemats, bunting, tiles, jigsaws, Christmas decorations and many other items. You can use different painting techniques such as stamping, cut-outs and stencilling.Colourist Heat Transfer Paints should be printed onto 100% synthetic surfaces for the most vibrant, colourfast effects. Use polyester or acrylic for the best results. Mixed fibres can be used - the higher the synthetic content, the stronger the printed colours will be.

Easy to use, as you paint straight from the liner. Ideal for almost any surface, from paper, wood, metal, glass, leather, plastic, fabrics (wash-resistant up to 40°C after fixing), etc.

Working Guidelines for Marabu-Metallic Liner and Glitter LinerEnsure that the surface is clean and dust-free. Drying time approx. 6 hours depending on colour application. For fabrics (cotton and blended textiles up to a maximum of 20 % synthetic fibres), wash out finishing and softening agents. Gently push liner tip onto the fabric and squeeze. After drying, iron each painted area for 3 min. on cotton setting with a thin cloth over the surface. Iron for 3 min. per 30 cm. Can also be fixed in a pre-heated oven (8 min. / 150°C). Test substrate for heat resistance first. Then wash-resistant up to 40°C. Wash and iron inside out.

Water based fabric pen with excellent opacity for school, hobby, leisure use. Suitable for almost all light and dark-coloured, non-finished natural textiles free of dressing. After fixing, it is light-fast, wash-resistant up to 40°C and has a soft feel.

A water-based fabric pen for school, hobby, leisure use. The pen is suitable for almost all light-coloured, non-finished textiles free of dressing.After fixing, Marabu-Textil Painter is light-fast, wash-resistant up to 60°C and has a soft feel. The pen is equipped with a capillary system, so activation is not necessary.Marabu-Textil Painters are available in two tip widths and can be used in perfect combination with Marabu-Textil. When used as an outline pen, it can be combined with Marabu-Textil and Textil plus (please follow the fixing instructions carefully); the dark shades are even suitable for painting over Textil and Textil plus.

Colourist Heat Transfer Paints allow you to create multi-coloured designs without specialist equipment. Using just a domestic iron you can print onto fabric, bags, Tshirts, coasters, placemats, bunting, tiles, jigsaws, Christmas decorations and many other items. You can use different painting techniques such as stamping, cut-outs and stencilling.Colourist Heat Transfer Paints should be printed onto 100% synthetic surfaces for the most vibrant, colourfast effects. Use polyester or acrylic for the best results. Mixed fibres can be used - the higher the synthetic content, the stronger the printed colours will be.

Easy to use, as you paint straight from the liner. Ideal for almost any surface, from paper, wood, metal, glass, leather, plastic, fabrics (wash-resistant up to 40°C after fixing), etc.

Working Guidelines for Marabu-Metallic Liner and Glitter LinerEnsure that the surface is clean and dust-free. Drying time approx. 6 hours depending on colour application. For fabrics (cotton and blended textiles up to a maximum of 20 % synthetic fibres), wash out finishing and softening agents. Gently push liner tip onto the fabric and squeeze. After drying, iron each painted area for 3 min. on cotton setting with a thin cloth over the surface. Iron for 3 min. per 30 cm. Can also be fixed in a pre-heated oven (8 min. / 150°C). Test substrate for heat resistance first. Then wash-resistant up to 40°C. Wash and iron inside out.