Properties:QUALITY: Opaque and very bright, solvent based colours, ideal for decorating ceramics. Very good lightfastness.COLOUR MIXABILITY: YesDRYING: Oxidation in air. The colours are dry "dust free" in 3 hours at heart after 48 hours.SURFACES: Terracotta, ceramicTHINNER: Odourless mineral spirit or white spiritOpacity: Opaque Finish: BrilliantCARING (decorated supports): After drying, the colours are resistant to scratching and washing in cold water without soaking.BRUSHES: Pébéo Cobra deco or Iris brushesBRUSH CLEANING: Odourless mineral spirit or white spirit.Product Usage:The Ceramic colours are ideal on terracotta and earthenware. To maximize the brightness on porous surfaces it is recommended to apply, prior to painting, a filler undercoat. On rounded surfaces, be careful not to overload to avoid runs. Ceramic colours can be applied with brush, sponge, screen or bath. A sufficiently thick layer of colour can be combined with another material like sand or engraved with a stick. Objects decorated with Ceramic colours are for decorative use only. Always clean brushes thoroughly with white spirit or odourless mineral spirit, then rinse with soapy water.

Fantasy Prisme are opaque, Alkyd oil-based colours that dry to reveal a stunning honeycomb effect and a pearlescent finish. The effect will become visible as the paint dries over the course of 5 to 10 minutes. There are 28 colours available, all with a good lightfastness.Fantasy Prisme colours are ready-to-use and mixable with each other and other paint ranges, such as Vitrail, Ceramic, Cerne Relief, Studio Acrylics and Gédéo resins. This provides a the opportunity to experiment widely on flat horizontal surfaces.

Fantasy Prisme are opaque, Alkyd oil-based colours that dry to reveal a stunning honeycomb effect and a pearlescent finish. The effect will become visible as the paint dries over the course of 5 to 10 minutes. There are 28 colours available, all with a good lightfastness.Fantasy Prisme colours are ready-to-use and mixable with each other and other paint ranges, such as Vitrail, Ceramic, Cerne Relief, Studio Acrylics and Gédéo resins. This provides a the opportunity to experiment widely on flat horizontal surfaces.

Fantasy Prisme are opaque, Alkyd oil-based colours that dry to reveal a stunning honeycomb effect and a pearlescent finish. The effect will become visible as the paint dries over the course of 5 to 10 minutes. There are 28 colours available, all with a good lightfastness.Fantasy Prisme colours are ready-to-use and mixable with each other and other paint ranges, such as Vitrail, Ceramic, Cerne Relief, Studio Acrylics and Gédéo resins. This provides a the opportunity to experiment widely on flat horizontal surfaces.

Fantasy Moon are opaque, Alkyd oil-based colours that instantly show a stunning hammered effect and a pearlescent finish upon application. There are 18 colours available, all with a good lightfastness. Fantasy Moon colours are ready-to-use and mixable with each other and other paint ranges, such as Vitrail, Ceramic, Cerne Relief, Studio Acrylics and Gédéo resins. They can be applied with a brush in thin or thick coats. This provides a the opportunity to experiment widely on a variety of surfaces.

Fantasy Moon are opaque, Alkyd oil-based colours that instantly show a stunning hammered effect and a pearlescent finish upon application. There are 18 colours available, all with a good lightfastness. Fantasy Moon colours are ready-to-use and mixable with each other and other paint ranges, such as Vitrail, Ceramic, Cerne Relief, Studio Acrylics and Gédéo resins. They can be applied with a brush in thin or thick coats. This provides a the opportunity to experiment widely on a variety of surfaces.

The 4Artist Marker pen is a multi-technique oil-based paint marker. The range of colours offer a glossy, highly pigmented finish with excellent lightfastness throughout. They can be mixed together and worked with a brush when applied to a non-absorbent surface. There are 4 different thicknesses of nib (from 2mm up to 15mm) which allows for versatility when creating artwork with them. They are ideal for applying on smooth and non-porous surfaces and are quick drying (5 to 15 minutes depending on the surface and thickness of application) Similar to oil paint, the colours can be diluted and reworked with odourless mineral spirit to obtain differing shades, gradients and tones on most surfaces. They can be applied to most surfaces including canvas, paper, plastic, wood and metal. Ideal for drawing, outlining, filling in large areas, glazing and mixed media. For special effects, simply saturate the tip with colour to create splashing and dripping effects. Uniform in application, there is no colour variation from wet-to-dry. They have a black aluminium body and a coloured cap, making them easily identifiable.

The 4Artist Marker pen is a multi-technique oil-based paint marker. The range of colours offer a glossy, highly pigmented finish with excellent lightfastness throughout. They can be mixed together and worked with a brush when applied to a non-absorbent surface. There are 4 different thicknesses of nib (from 2mm up to 15mm) which allows for versatility when creating artwork with them. They are ideal for applying on smooth and non-porous surfaces and are quick drying (5 to 15 minutes depending on the surface and thickness of application) Similar to oil paint, the colours can be diluted and reworked with odourless mineral spirit to obtain differing shades, gradients and tones on most surfaces. They can be applied to most surfaces including canvas, paper, plastic, wood and metal. Ideal for drawing, outlining, filling in large areas, glazing and mixed media. For special effects, simply saturate the tip with colour to create splashing and dripping effects. Uniform in application, there is no colour variation from wet-to-dry. They have a black aluminium body and a coloured cap, making them easily identifiable.

Quality:

Transparent, intense and very bright colours. Solvent based, ready to use. Good lightfastness. Use with the cerne relief.

Colour mixability:

Colours can be mixed together.

Drying:

Tack-free in one hour, fully dry in 8 hours if led in thin coats.

Surfaces:

Glass, polyester, acetate ..

Thinner:

Odourless mineral spirit or white spirit.

Opacity:

Transparent and opaque colours

Finish:

Brilliant.

Pébéo's Vitrail is applied with a brush to all carefully degreased transparent surfaces : glass, acetate, polyester, plexiglas.

Quality:

Transparent, intense and very bright colours. Solvent based, ready to use. Good lightfastness. Use with the cerne relief.

Colour mixability:

Colours can be mixed together.

Drying:

Tack-free in one hour, fully dry in 8 hours if led in thin coats.

Surfaces:

Glass, polyester, acetate ..

Thinner:

Odourless mineral spirit or white spirit.

Opacity:

Transparent and opaque colours

Finish:

Brilliant.

Pébéo's Vitrail is applied with a brush to all carefully degreased transparent surfaces : glass, acetate, polyester, plexiglas.

Quality:

Transparent, intense and very bright colours. Solvent based, ready to use. Good lightfastness. Use with the cerne relief.

Colour mixability:

Colours can be mixed together.

Drying:

Tack-free in one hour, fully dry in 8 hours if led in thin coats.

Surfaces:

Glass, polyester, acetate ..

Thinner:

Odourless mineral spirit or white spirit.

Opacity:

Transparent and opaque colours

Finish:

Brilliant.

Pébéo's Vitrail is applied with a brush to all carefully degreased transparent surfaces : glass, acetate, polyester, plexiglas.

Product Usage: • Objects decorated with Vitrail colours should not be considered for practical usage and are intended for decorative purposes only. Furthermore only surfaces not destined to be put in contact with food should be decorated. • Keep out of reach of children. If swallowed seek prompt medical attention and present the packaging or label.

Quality:

Transparent, intense and very bright colours. Solvent based, ready to use. Good lightfastness. Use with the cerne relief.

Colour mixability:

Colours can be mixed together.

Drying:

Tack-free in one hour, fully dry in 8 hours if led in thin coats.

Surfaces:

Glass, polyester, acetate ..

Thinner:

Odourless mineral spirit or white spirit.

Opacity:

Transparent and opaque colours

Finish:

Brilliant.

Pébéo's Vitrail is applied with a brush to all carefully degreased transparent surfaces : glass, acetate, polyester, plexiglas.

Product Usage: • Objects decorated with Vitrail colours should not be considered for practical usage and are intended for decorative purposes only. Furthermore only surfaces not destined to be put in contact with food should be decorated. • Keep out of reach of children. If swallowed seek prompt medical attention and present the packaging or label.

Quality:

Transparent, intense and very bright colours. Solvent based, ready to use. Good lightfastness. Use with the cerne relief.

Colour mixability:

Colours can be mixed together.

Drying:

Tack-free in one hour, fully dry in 8 hours if led in thin coats.

Surfaces:

Glass, polyester, acetate ..

Thinner:

Odourless mineral spirit or white spirit.

Opacity:

Transparent and opaque colours

Finish:

Brilliant.

Pébéo's Vitrail is applied with a brush to all carefully degreased transparent surfaces : glass, acetate, polyester, plexiglas.

Product Usage: • Objects decorated with Vitrail colours should not be considered for practical usage and are intended for decorative purposes only. Furthermore only surfaces not destined to be put in contact with food should be decorated. • Keep out of reach of children. If swallowed seek prompt medical attention and present the packaging or label.

Quality:

Transparent, intense and very bright colours. Solvent based, ready to use. Good lightfastness. Use with the cerne relief.

Colour mixability:

Colours can be mixed together.

Drying:

Tack-free in one hour, fully dry in 8 hours if led in thin coats.

Surfaces:

Glass, polyester, acetate ..

Thinner:

Odourless mineral spirit or white spirit.

Opacity:

Transparent and opaque colours

Finish:

Brilliant.

Pébéo's Vitrail is applied with a brush to all carefully degreased transparent surfaces : glass, acetate, polyester, plexiglas.

Product Usage: • Objects decorated with Vitrail colours should not be considered for practical usage and are intended for decorative purposes only. Furthermore only surfaces not destined to be put in contact with food should be decorated. • Keep out of reach of children. If swallowed seek prompt medical attention and present the packaging or label.

Quality:

Transparent, intense and very bright colour. Solvent based, ready to use. Good lightfastness. Use with the cerne relief.

Colour mixability:

Colours can be mixed together.

Drying:

Tack-free in one hour, fully dry in 8 hours if led in thin coats.

Surfaces:

Glass, polyester, acetate ..

Thinner:

Odourless mineral spirit or white spirit.

Opacity:

Transparent and opaque colours

Finish:

Brilliant.

Pébéo's Vitrail is applied with a brush to all carefully degreased transparent surfaces : glass, acetate, polyester, plexiglas.

Product Usage: • Objects decorated with Vitrail colours should not be considered for practical usage and are intended for decorative purposes only. Furthermore only surfaces not destined to be put in contact with food should be decorated. • Keep out of reach of children. If swallowed seek prompt medical attention and present the packaging or label.

Quality:

Transparent, intense and very bright colour. Solvent based, ready to use. Good lightfastness. Use with the cerne relief.

Colour mixability:

Colours can be mixed together.

Drying:

Tack-free in one hour, fully dry in 8 hours if led in thin coats.

Surfaces:

Glass, polyester, acetate ..

Thinner:

Odourless mineral spirit or white spirit.

Opacity:

Transparent and opaque colours

Finish:

Brilliant.

Pébéo's Vitrail is applied with a brush to all carefully degreased transparent surfaces : glass, acetate, polyester, plexiglas.

Product Usage: • Objects decorated with Vitrail colours should not be considered for practical usage and are intended for decorative purposes only. Furthermore only surfaces not destined to be put in contact with food should be decorated. • Keep out of reach of children. If swallowed seek prompt medical attention and present the packaging or label.

QUALITY: Water-based paste in 20ml tube with nozzle. Finish: Brilliant. DRYING: 1 hour to the touch, 24 hours to dry completely. CLEANING DECORATED ITEMS: After drying, the dimensional paint may be lightly washed without soaking. Resistant to window cleaners. CLEANING THE BRUSHES: With soap.

Properties :QUALITY: Deep and glossy, transparent or opaque, with a superb enamelled appearance after baking. The range includes 10 shimmering colours, twinkling and iridescent effects, particularly opaque and covering. Excellent lightfastness.COLOUR MIXABILITY: Colours can be mixed together.DRYING: Tack free in a few minutes, fully dry in a minimum of 24 hours. Baking all colours and auxiliary products in the range : 35 minutes at 150°C (300°F) in domestic oven, after minimum 24 hours drying. For the markers: Allow to air dry 72 hours for decorative use with light washing and no soaking.Product Usage :Porcelaine 150 can be applied to all heat-stable bases that are able to withstand a temperature of 150°C (300°F), such as porcelain, china, glazed earthenware, terracotta, metal, enameled sheet steel, copper and glass. The choice of base enables numerous effects to be produced and experiments to be made with the transparency and intensity of the colours. Porcelaine 150 makes professional enameling available to all, with a new generation of 46 colours, glazed by simply baking at 150°C (300°F) in any domestic oven. In bottle, tube and marker, which can be mixed together, deep and glossy, transparent or opaque, with a superb enameled appearance after baking. Many applications are possible with Porcelaine 150: with brushes and also with sponge and stencil. The Porcelaine 150 outliners, in tube with nozzle, can be used for outlining work and screen printing. The markers are recommended for lines and writing. Shake well before use. Press tip repeatedly to start ink flow. Allow to air dry 72 hours for decorative use with light washing and no soaking. For dishwasher resistance, allow to air dry 24 hour after application then bake in oven for 35 minutes at 150°C (300°F). Store flatwise. Keep away from freezing.

Properties :QUALITY: Deep and glossy, transparent or opaque, with a superb enamelled appearance after baking. The range includes 10 shimmering colours, twinkling and iridescent effects, particularly opaque and covering. Excellent lightfastness.COLOUR MIXABILITY: Colours can be mixed together.DRYING: Tack free in a few minutes, fully dry in a minimum of 24 hours. Baking all colours and auxiliary products in the range : 35 minutes at 150°C (300°F) in domestic oven, after minimum 24 hours drying. For the markers: Allow to air dry 72 hours for decorative use with light washing and no soaking.Product Usage :Porcelaine 150 can be applied to all heat-stable bases that are able to withstand a temperature of 150°C (300°F), such as porcelain, china, glazed earthenware, terracotta, metal, enameled sheet steel, copper and glass. The choice of base enables numerous effects to be produced and experiments to be made with the transparency and intensity of the colours. Porcelaine 150 makes professional enameling available to all, with a new generation of 46 colours, glazed by simply baking at 150°C (300°F) in any domestic oven. In bottle, tube and marker, which can be mixed together, deep and glossy, transparent or opaque, with a superb enameled appearance after baking. Many applications are possible with Porcelaine 150: with brushes and also with sponge and stencil. The Porcelaine 150 outliners, in tube with nozzle, can be used for outlining work and screen printing. The markers are recommended for lines and writing. Shake well before use. Press tip repeatedly to start ink flow. Allow to air dry 72 hours for decorative use with light washing and no soaking. For dishwasher resistance, allow to air dry 24 hour after application then bake in oven for 35 minutes at 150°C (300°F). Store flatwise. Keep away from freezing.

Properties :QUALITY: Deep and glossy, transparent or opaque, with a superb enamelled appearance after baking. The range includes 10 shimmering colours, twinkling and iridescent effects, particularly opaque and covering. Excellent lightfastness.COLOUR MIXABILITY: Colours can be mixed together.DRYING: Tack free in a few minutes, fully dry in a minimum of 24 hours. Baking all colours and auxiliary products in the range : 35 minutes at 150°C (300°F) in domestic oven, after minimum 24 hours drying. For the markers: Allow to air dry 72 hours for decorative use with light washing and no soaking.Product Usage :Porcelaine 150 can be applied to all heat-stable bases that are able to withstand a temperature of 150°C (300°F), such as porcelain, china, glazed earthenware, terracotta, metal, enameled sheet steel, copper and glass. The choice of base enables numerous effects to be produced and experiments to be made with the transparency and intensity of the colours. Porcelaine 150 makes professional enameling available to all, with a new generation of 46 colours, glazed by simply baking at 150°C (300°F) in any domestic oven. In bottle, tube and marker, which can be mixed together, deep and glossy, transparent or opaque, with a superb enameled appearance after baking. Many applications are possible with Porcelaine 150: with brushes and also with sponge and stencil. The Porcelaine 150 outliners, in tube with nozzle, can be used for outlining work and screen printing. The markers are recommended for lines and writing. Shake well before use. Press tip repeatedly to start ink flow. Allow to air dry 72 hours for decorative use with light washing and no soaking. For dishwasher resistance, allow to air dry 24 hour after application then bake in oven for 35 minutes at 150°C (300°F). Store flatwise. Keep away from freezing.

Properties :QUALITY: Deep and glossy, transparent or opaque, with a superb enamelled appearance after baking. The range includes 10 shimmering colours, twinkling and iridescent effects, particularly opaque and covering. Excellent lightfastness.COLOUR MIXABILITY: Colours can be mixed together.DRYING: Tack free in a few minutes, fully dry in a minimum of 24 hours. Baking all colours and auxiliary products in the range : 35 minutes at 150°C (300°F) in domestic oven, after minimum 24 hours drying. For the markers: Allow to air dry 72 hours for decorative use with light washing and no soaking.Product Usage :Porcelaine 150 can be applied to all heat-stable bases that are able to withstand a temperature of 150°C (300°F), such as porcelain, china, glazed earthenware, terracotta, metal, enameled sheet steel, copper and glass. The choice of base enables numerous effects to be produced and experiments to be made with the transparency and intensity of the colours. Porcelaine 150 makes professional enameling available to all, with a new generation of 46 colours, glazed by simply baking at 150°C (300°F) in any domestic oven. In bottle, tube and marker, which can be mixed together, deep and glossy, transparent or opaque, with a superb enameled appearance after baking. Many applications are possible with Porcelaine 150: with brushes and also with sponge and stencil. The Porcelaine 150 outliners, in tube with nozzle, can be used for outlining work and screen printing. The markers are recommended for lines and writing. Shake well before use. Press tip repeatedly to start ink flow. Allow to air dry 72 hours for decorative use with light washing and no soaking. For dishwasher resistance, allow to air dry 24 hour after application then bake in oven for 35 minutes at 150°C (300°F). Store flatwise. Keep away from freezing.

Properties :QUALITY: Deep and glossy, transparent or opaque, with a superb enamelled appearance after baking. The range includes 10 shimmering colours, twinkling and iridescent effects, particularly opaque and covering. Excellent lightfastness.COLOUR MIXABILITY: Colours can be mixed together.DRYING: Tack free in a few minutes, fully dry in a minimum of 24 hours. Baking all colours and auxiliary products in the range : 35 minutes at 150°C (300°F) in domestic oven, after minimum 24 hours drying. For the markers: Allow to air dry 72 hours for decorative use with light washing and no soaking.Product Usage :Porcelaine 150 can be applied to all heat-stable bases that are able to withstand a temperature of 150°C (300°F), such as porcelain, china, glazed earthenware, terracotta, metal, enameled sheet steel, copper and glass. The choice of base enables numerous effects to be produced and experiments to be made with the transparency and intensity of the colours. Porcelaine 150 makes professional enameling available to all, with a new generation of 46 colours, glazed by simply baking at 150°C (300°F) in any domestic oven. In bottle, tube and marker, which can be mixed together, deep and glossy, transparent or opaque, with a superb enameled appearance after baking. Many applications are possible with Porcelaine 150: with brushes and also with sponge and stencil. The Porcelaine 150 outliners, in tube with nozzle, can be used for outlining work and screen printing. The markers are recommended for lines and writing. Shake well before use. Press tip repeatedly to start ink flow. Allow to air dry 72 hours for decorative use with light washing and no soaking. For dishwasher resistance, allow to air dry 24 hour after application then bake in oven for 35 minutes at 150°C (300°F). Store flatwise. Keep away from freezing.

Properties :QUALITY: Deep and glossy, transparent or opaque, with a superb enamelled appearance after baking. The range includes 10 shimmering colours, twinkling and iridescent effects, particularly opaque and covering. Excellent lightfastness.COLOUR MIXABILITY: Colours can be mixed together.DRYING: Tack free in a few minutes, fully dry in a minimum of 24 hours. Baking all colours and auxiliary products in the range : 35 minutes at 150°C (300°F) in domestic oven, after minimum 24 hours drying. For the markers: Allow to air dry 72 hours for decorative use with light washing and no soaking.Product Usage :Porcelaine 150 can be applied to all heat-stable bases that are able to withstand a temperature of 150°C (300°F), such as porcelain, china, glazed earthenware, terracotta, metal, enameled sheet steel, copper and glass. The choice of base enables numerous effects to be produced and experiments to be made with the transparency and intensity of the colours. Porcelaine 150 makes professional enameling available to all, with a new generation of 46 colours, glazed by simply baking at 150°C (300°F) in any domestic oven. In bottle, tube and marker, which can be mixed together, deep and glossy, transparent or opaque, with a superb enameled appearance after baking. Many applications are possible with Porcelaine 150: with brushes and also with sponge and stencil. The Porcelaine 150 outliners, in tube with nozzle, can be used for outlining work and screen printing. The markers are recommended for lines and writing. Shake well before use. Press tip repeatedly to start ink flow. Allow to air dry 72 hours for decorative use with light washing and no soaking. For dishwasher resistance, allow to air dry 24 hour after application then bake in oven for 35 minutes at 150°C (300°F). Store flatwise. Keep away from freezing.

Properties :QUALITY: Deep and glossy, transparent or opaque, with a superb enamelled appearance after baking. The range includes 10 shimmering colours, twinkling and iridescent effects, particularly opaque and covering. Excellent lightfastness.COLOUR MIXABILITY: Colours can be mixed together.DRYING: Tack free in a few minutes, fully dry in a minimum of 24 hours. Baking all colours and auxiliary products in the range : 35 minutes at 150°C (300°F) in domestic oven, after minimum 24 hours drying. For the markers: Allow to air dry 72 hours for decorative use with light washing and no soaking.Product Usage :Porcelaine 150 can be applied to all heat-stable bases that are able to withstand a temperature of 150°C (300°F), such as porcelain, china, glazed earthenware, terracotta, metal, enameled sheet steel, copper and glass. The choice of base enables numerous effects to be produced and experiments to be made with the transparency and intensity of the colours. Porcelaine 150 makes professional enameling available to all, with a new generation of 46 colours, glazed by simply baking at 150°C (300°F) in any domestic oven. In bottle, tube and marker, which can be mixed together, deep and glossy, transparent or opaque, with a superb enameled appearance after baking. Many applications are possible with Porcelaine 150: with brushes and also with sponge and stencil. The Porcelaine 150 outliners, in tube with nozzle, can be used for outlining work and screen printing. The markers are recommended for lines and writing. Shake well before use. Press tip repeatedly to start ink flow. Allow to air dry 72 hours for decorative use with light washing and no soaking. For dishwasher resistance, allow to air dry 24 hour after application then bake in oven for 35 minutes at 150°C (300°F). Store flatwise. Keep away from freezing.

Properties :QUALITY: Deep and glossy, transparent or opaque, with a superb enamelled appearance after baking. The range includes 10 shimmering colours, twinkling and iridescent effects, particularly opaque and covering. Excellent lightfastness.COLOUR MIXABILITY: Colours can be mixed together.DRYING: Tack free in a few minutes, fully dry in a minimum of 24 hours. Baking all colours and auxiliary products in the range : 35 minutes at 150°C (300°F) in domestic oven, after minimum 24 hours drying. For the markers: Allow to air dry 72 hours for decorative use with light washing and no soaking.Product Usage :Porcelaine 150 can be applied to all heat-stable bases that are able to withstand a temperature of 150°C (300°F), such as porcelain, china, glazed earthenware, terracotta, metal, enameled sheet steel, copper and glass. The choice of base enables numerous effects to be produced and experiments to be made with the transparency and intensity of the colours. Porcelaine 150 makes professional enameling available to all, with a new generation of 46 colours, glazed by simply baking at 150°C (300°F) in any domestic oven. In bottle, tube and marker, which can be mixed together, deep and glossy, transparent or opaque, with a superb enameled appearance after baking. Many applications are possible with Porcelaine 150: with brushes and also with sponge and stencil. The Porcelaine 150 outliners, in tube with nozzle, can be used for outlining work and screen printing. The markers are recommended for lines and writing. Shake well before use. Press tip repeatedly to start ink flow. Allow to air dry 72 hours for decorative use with light washing and no soaking. For dishwasher resistance, allow to air dry 24 hour after application then bake in oven for 35 minutes at 150°C (300°F). Store flatwise. Keep away from freezing.