The MTD70T True RMS 600A AC Clamp Meter is a useful tool that allows you to safely test for electrical problems, motor’s condition and current on appliances. Equipped to test any electrical circuit without disconnecting any wires. Handy features include a backlit LCD display and flashlight for working in dimly lit areas. The NCV Non-Contact Voltage detector is useful for a quick check to see if voltage is present on circuit under test. Measures 0.001A to 600A AC, DC and AC Volt, Resistance, Continuity buzzer and Diode Test. This 600A AC Clamp Meter ha a 28mm Jaw opening and accessories include carrying case and test leads.

ADDITIONAL INFORMATION:
DC Voltage: 200mV – 2V – 20V – 200V – 600V
DC Voltage accuracy: ±(0.5% + 5d)
AC Voltage: 200mV – 2V – 20V – 200V – 600V
AC voltage accuracy: ±(1.0% +5)
AC Current: 2A – 20A – 200A – 600A
AC Current accuracy: ±(2.0% +5)
Resistance: 200Ω – 2kΩ – 20kΩ – 200kΩ – 2MΩ – 20MΩ
Resistance accuracy: ±(0.8% + 1d)
Continuity: Buzzer sounds at approx. 50Ω
Diode Test: Test current 0.8mA, open circuit voltage 2.2V
Power source: 2 x 1.5V AAA batteries
Dimensions: 185 x 65 x 37mm
Weight: 280g

The MTD10 DIY Digital Multi meter is a completely portable 3 ½ digital multi meter designed for use by a student and hobbyist. Equipped with 8 functions and 21 ranges, each test position is quickly and easily selected with a simple turn of the single selector switch.

ADDITIONAL INFORMATION:
Data Hold: Yes
Power source: 9V Alkaline / Carbon-zine
Over-range indication: Yes
Diode Test: Yes
Digital Display: 3 ½ Digital LCD 1999 max
DC Voltage: 200mV – 2V – 20V – 200V – 500V
DC Current: 200µA-2mA-20mA-200mA-10A
Built-in buzzer: Yes
Continuity: Yes
Battery test: 1.5V
Battery Life: 100 Hrs carbon-zine
Back Light: Yes
AC Voltage: 200V-500V
Resistance: 200Ω-2kΩ-20kΩ-200kΩ-2MΩ
Fuse: F 200mA/250V
Weight: 195g
Dimensions: 144 (h) x 71(w) x 32(d) mm

MT800 is a cost effective analogue multimeter for hobbyist and home owner for shop, office, home, boats and cars.

ADDITIONAL INFORMATION:
Weight: 95g
Battery: 1 x AA
Dimensions: 100mm(H) x 64mm(W) x 33mm (D)
AC Voltage: 10V – 50V – 250V – 500V
DC Voltage: 2.5V – 10V – 50V – 250V – 500V

The MTD73A True RMS 800A AC Clamp Meter is a useful tool that allows you to safely test for electrical problems, motor’s condition and current on appliances. Equipped to test any electrical circuit without disconnecting any wires. Handy function includes a backlit LCD display and Flashlight for working in dimly lit areas. The NCV Non-Contact Voltage detector is useful for a quick check to see it voltage is present on circuit under test. Measures 0.001A to 800A AC, 0.1mV to 600V AC/DC, Temperature, Capacitance, Frequency, Resistance, Continuity buzzer and Diode Test. This 800A AC Clamp Meter has a 28mm Jaw opening and accessories include test leads, temperature air probe and carrying case.

ADDITIONAL INFORMATION:
DC Voltage: 400mV – 4V – 40V – 400V – 600V
DC Voltage accuracy: ±(0.5% + 5d)
AC Voltage: 4V – 40V – 400V – 600V
AC voltage accuracy: ±(1.0% +5)
AC Current: 4A – 40A – 400A – 800A
AC Current accuracy: ±(3.0% +5)
Resistance: 400Ω – 4kΩ – 40kΩ – 400kΩ – 4MΩ – 40MΩ
Resistance accuracy: ±(0.8% + 3d)
Capacitance: 4nF – 40nF – 400nF – 4uF – 40uF – 400uF – 4mF – 40mF
Capacitance accuracy: ±(2.5% + 5d)
Frequency: 10Hz – 100Hz – 1kHz – 10kHz – 100kHz – 1MHz – 10MHz
Frequency accuracy: ±(0.5% + 4d)
Temperature: -40 to 1000°C
Temperature accuracy: ±(1.0% + 5°C)
Continuity: Buzzer sounds at approx. 50Ω
Diode Test: Test current 0.8mA, open circuit voltage 2.2V
Power source: 2 x 1.5V AAA batteries
Dimensions: 185 x 65 x 37mm
Weight: 180g

The MTD84 is a compact True RMS auto ranging multimeter with a 6000 count LCD backlit display. The Smart mode, “AUTO”, is a
function that automatically identifies DC voltage, AC voltage, Resistance and continuity and automatically displays the measurements.
There is a built-in Non-Contact voltage detector, by pressing the NCV button continuously the LCD displays “EF” and will display “—-“
when voltage is detected and the buzzer sounds. This meter meets the International Standard IEC 61010-1 CAT III 600V, and is ideally
suited for everyday use by electricians, electronic technicians, students and DIY users The meter has a built-in tilt stand for hands free
convenience as well as low battery indication and auto power off.


ADDITIONAL INFORMATION:
DC Voltage: 60.00mV – 1000V
AC Voltage:60.00mV – 750V
DC Current: 60.00mA – 10.00A
AC Current: 60.00mA – 10.00A
Duty Cycle: 1% – 99%
Resistance: 600.0Ω – 60.00MΩ
Frequency: 99.99Hz – 10MHz
Capacitance: 9.999nF – 9.999mF
True RMS Measurements: Yes
Continuity: Yes
Built-in Buzzer: Yes
Diode Test: Yes
Ac Bandwidth: 50Hz to 400Hz
Digital Display: LCD 6000 count
Overrange Indication: Yes
Data Hold: Yes
Back Light: Yes
Enclosure: ABS/PVC
Batteries: 2 x AAA
Weight: 138g
Dimensions: 130 x 65 x 32mm
Safety Specs: CAT III 600V

The MTD80 is a compact True RMS auto ranging multimeter with a 4000 count LCD backlit display. The meter always operates in the
Smart mode “AUTO” function that automatically identifies DC voltage, AC voltage, Resistance and continuity buzzer and automatically
displays the measurements. There is a built-in Non-Contact voltage detector, by pressing the NCV button continuously the LCD
displays “EF” and will display “—-“ when voltage is detected and the buzzer sounds. This meter meets the International Standard IEC
61010-1 CAT II 600V/ CAT III 300V, and is ideally suited for users who want a simple meter to automatically read the measurement of the
circuit or system under test. Ideal for everyday use by electricians, electronic technicians, alarm installers, students and DIY users The
meter has a rubber holster with a built-in tilt stand for hands free convenience as well as low battery indication and auto power off.

ADDITIONAL INFORMATION:
DC Voltage: 4.000V – 600V
AC Voltage: 4.000V – 600V
DC Current; 999.9mA – 10A
AC Current: 999.9mA – 10A
Resistance: 4.000kΩ – 40.00MΩ
True RMS Measurements: Yes
Continuity: Yes
Built-in Buzzer: Yes
AC Bandwidth: 40Hz to 1kHz
Digital Display: LCD 4000 count
Non-Contact Voltage (NCV): Yes
Overrange indication: Yes
Data Hold: Yes
Back Light: Yes
Enclosure: ABS
Batteries: 2 x AAA
Weight: 140g
Dimensions: 120 x 62 x 30mm
Safety Specs: CAT II 600V

The MT870 is a 600V AC/DC True RMS Multimeter supplied with a rubber holster designed to be robust and drop proof. The meter has a 2000 count large easy to read display and is an auto ranging multimeter with the option of manual override. Measuring functions include AC and DC voltage, AC and DC current, resistance, continuity buzzer and diode test range. The AC and DC micro Amp ranges is suited for electronic measurements. The MT870 also offers the added convenience of 1.5V and 9V battery tests and a tilt stand. This meter meets the International Standard IEC 61010-1 CAT III 300V. The meter offers excellent performance and is ideal as a handy multimeter for electronic technicians and electricians, alarm installers and students studying electronics.

ADDITIONAL INFORMATION:

• DC Voltage: 600V
• DC Voltage resolution: 0.1mV
• DC Voltage accuracy” ±(0.5% +2)
• AC Voltage: 600V
• AC Voltage resolution: 1mV
• AC voltage accuracy” ±(0.8% +3)
• DC Current: 10A
• DC Current resolution: 0.1µA
• DC Current accuracy: ±(1.2%+2)
• AC Current: 10A
• AC current resolution: 0.1µA
• AC Current accuracy: ±(1.5% +3)
• Resistance resolution: 0.1Ω
• Resistance accuracy: ±(1.0% +2
• Continuity: Yes
• Diode Test: Yes
• True RMS Measurements: Yes
• AC Bandwidth: 40Hz to 400Hz
• Display: 2000 count LCD
• Over-range indication: Yes
• Input Impedance: 10MΩ VDC & 10MΩ VAC
• Data Hold: Yes
• Enclosure: Rubber Holster
• Low battery indication: Yes
• Power Supply: 2 x 1.5V AA Batteries
• Weight    : 250g (including battery)
• Dimensions: 150 (L) x 75 (W) x 36 (D) mm

The MTD75T True RMS 800A AC/DC Clamp Meter is a useful tool that allows you to safely test for electrical problems, motor’s condition and current on appliances. Equipped to test any electrical circuit without disconnecting any wires. Handy function includes a backlit LCD display and Flashlight for working in dimly lit areas. The NCV Non-Contact Voltage detector is useful for a quick check to see it voltage is present on circuit under test. Measures 0.01A to 800A AC & DC, 0.1mV to 600V AC/DC, Temperature, Capacitance, Frequency, Resistance, Continuity buzzer and Diode Test. This 800A AC/DC Clamp Meter has a 28mm Jaw opening and accessories include test leads, temperature air probe and carrying case.


ADDITIONAL INFORMATION:
DC Voltage: 600mV – 6V – 60V – 600V
DC Voltage accuracy: ±(0.5% + 5d)
AC Voltage: 6V – 60V – 600V
AC voltage accuracy: ±(0.8%+5)
DC Current: 60A – 600A – 800A
DC Current accuracy: ±(1.5% +5)
AC Current: 60A – 600A – 800A
AC Current accuracy: ±(1.5% +5)
Resistance: 600Ω – 6kΩ – 60kΩ – 600kΩ – 6MΩ – 60MΩ
Resistance accuracy: ±(0.8% + 1d)
Capacitance: 6nF – 60nF – 600nF – 6uF – 60uF – 600uF – 6mF – 60mF
Capacitance accuracy: ±(2.5% + 5d)
Frequency: 10Hz – 100Hz – 1kHz – 10kHz – 100kHz – 1MHz – 10MHz
Frequency accuracy: ±(0.5% + 4d)
Temperature: -40 to 1000°C
Temperature accuracy: ±(1.0% + 5°C)
Continuity: Buzzer sounds at approx. 50Ω
Diode Test: Test current 0.8mA, open circuit voltage 2.2V
Power source: 2 x 1.5V AAA batteries
Dimensions: 185 x 65 x 37mm
Weight: 180g

The MTD81 is a compact auto ranging multimeter with a 4000 count LCD backlit display. Measuring functions include AC and DC
voltage, AC and DC current, Resistance, Frequency, Capacitance, continuity buzzer and diode test range. This meter meets the International Standard IEC 61010-1 CAT III 600V, and is ideally suited for everyday use by electricians, electronic technicians, students
and DIY users. The meter has a built-in tilt stand for hands free convenience as well as low battery indication and auto power off.


ADDITIONAL INFORMATION:
DC Voltage:400.0mV – 1000V
AC Voltage: 400.0mV – 750V
DC Current: 40mA – 10A
AC Current: 40mA – 10A
Duty Cycle: 1% – 99%
Resistance: 400.0Ω – 40.00MΩ
Frequency: 99.99Hz – 10MHz
Capacitance: 4.000nF – 200.0µF
Continuity: Yes
Build-In Buzzer: Yes
Diode Test: Yes
Battery Test: Yes
ACV Bandwidth: 50Hz to 400Hz
Display: LCD 4000 Count
Over-range indication: “OL” is displayed
Data Hold: Yes
Back Light: Yes
Enclosure: ABS
Batteries: 2 x AAA
Weight: 136g
Dimensions: 130 x 65 x 32mm
Safety Specs: CAT III 600V

The MT874 True RMS 600V AC/DC Multimeter is a durable and attractive compact Multimeter with a high contrast LCD display with detailed display icons. Equipped with 7 measurement functions and 20 ranges, each test position is quickly and easily selected with a simple turn of the selector switch. The meter has a double moulded housing and has an IEC 61010-1 CAT III 600V safety rating. The sturdy structure is designed to withstand the rugged environment of a work site and has been drop tested up to 2 meters.
This 600V AC/DC Multimeter comes with a built-in tilt stand for hands free convenience as well as low battery indication and auto power off. This meter is suitable for commercial electricians, electronics technicians and DIY users.

Infrared thermometer for non-contact surface temperature measurements
10:1 optics and high resolution processor for accurate measurement results
Easy to use thanks to the gun-style design
Adjustable emissivity level for differing emission factors on various surface types

The testo 830-T1 infrared thermometer allows efficient, non-contact surface temperature measurements to be carried out. The IR thermometer will leave you well equipped, especially for control readings in trade and industry: The gun-style design is easy to handle and the integrated processor provides accurate measurement results.

Product Description:
The testo 830-T1 IR thermometer with laser measurement spot marker and 10:1 optics is suitable for non-contact surface temperature measurements in trade and industry.

Overview of the advantages of the testo 830-T1 infrared thermometer
Non-contact measurement of the surface temperature is accurate and fast with the testo 830-T1 infrared thermometer (2 measurements a second). To summarise the IR thermometer offers the following advantages:

High resolution processor for utmost accuracy (resolution 0.1 °C)
10:1 optics for precise measurements even at medium distances
IR thermometer with 1 point laser measurement spot marker to target the measuring point
Two alarm limit values that can be defined as required
Visual and acoustic alarm if limit value exceeded
Min./max. value display and hold function (to record a measured value)
Convenient one-handed operation thanks to the ergonomic gun-style design
Clear, illuminated digital display

The speed of the testo 830-T1 IR thermometer is impressive: it can take two measurements a second. This means you can undertake bigger measuring tasks fast and efficiently.

The infrared thermometer emission level can be individually set. This allows you to adjust it precisely to the material of the surface being measured to achieve the best possible measurement results. For untreated surfaces with a low emission level, we recommend using an emission tape (optional) which makes the IR measurement significantly easier.

Technical data:
Temperature Infrared:
Measuring range: -30 to +400 °C
Accuracy: ±1.5 °C or ±1.5 % of mv (+0.1 to +400 °C)
±2 °C or ±2 % of mv (-30 to 0 °C) (the higher value applies)
Measuring rate: 0.5 s
Infrared resolution: 0.1 °C

General technical data:
Dimensions: 190 x 75 x 38 mm
Operating temperature: -20 to +50 °C
Housing: ABS
Battery type: 9V block battery
Battery life: 15 h
Storage temperature: -40 to +70 °C
Weight: 200 g

The MT235 battery tester measures all kinds of batteries. The user can choose three measurement methods according to the
battery shape and read the Voltage on the LCD display. Proper use and care of this tester will provide many years of reliable
service.

Battery Type Load Current Minimum Voltage for Good Indication
Button cell 1.5V 50mA 1.125V±0.09V
AAA-N-1.5V 50mA 1.125V±0.09V
AA-C-D-1.5V 150mA 1.125V±0.09V
Lithium 3V 100mA 2.25V±0.18V
6V 10mA 4.5V±0.36V
9V 10mA 6.75V±0.54V
12V 10mA 9V±0.72V
15V 10mA 11.25V±0.9V
22.5V 10mA 16.875±1.35V

Engine Timing Tool Set Audi, VW
Used on VAG 2.0 TDi engines in , A4/A6, ; 11, ; , Golf Plus, , .
Set provides essential tools for setting and locking the engine.

Equivalent to OEM Tools: 310 085/T10050, T10100, 3359/T20102, T10115, T10060/A.

; A2 1.4 TDi PD (02-06), A3 1.9, 2.0 TDi PD (02-08), A4 1.2 TDi PD (02-05), A4 1.9, 2.0 TDi PD (04-08), A6 1.9 TDi PD (02-05), ; 1.9 SDi/TDi (05-08), 1.9, 2.0 Tdi PD (05-08), 1.9 SDi/TDi (05-08), ; 1.4 TDi PD (03-06), Octavia II 2.0 TDi PD (03-06), ; 1.9 TDi PD (02-08), 1.9 TDi PD (02-08), 1.4 TDi PD (02-08), 1.9 TDi PD (02-08), 1.4 TDi PD (02-08), 1.4, 1.9 TDi PD (02-08), 1.9 TDi PD (02-08).

Engine Codes:
i: AMF, ASZ, ATD, AVB, AVF, AWX, AXR, AZV, BHC, BKC, BKD, BKE, BLB, BMN, BNA, BPW, BRB, BRC, BRD, BRE, BRF, BUY, BVA, BVF, BVG,
AXR, ATD, AUY, ARL, AJM, ANU, ASU, BLS, BSU, BJB, BST, , BDK, BRU, BKC, AZV, BKD, BMP, BDV, BMP, BMP, BMP, BMP, BMP, BMP, BMP, BMP, BNV, BTB, BVK, BXF, AVQ, AXC, BRR, BRS, ALH, AGR, AXR, AGP, AQM, ASV, AHF, AYQ, AYM, , BDH, BAU, AFB, BVW, CARA, BMK, ASY, BMT, BLT, BRT, BKS, CASA, ABB, X1, ALT, AWT, BJX
 BJB, BKC, BLS, BMM, BXE,
 AMF, AZV, BKD, VW; AJM, AMF, ANU, ARL, ASZ, ATD, AUY, AVB, AVF, AWX, AXR, BAY, BMS, BNM, BNV, BWB.

or professionals who need fundamental wire identification tools without the extra cost, the 3PK-NT023N basic Tone and Probe Kit is the answer. Use it on de-energized AC wire, telephone/twisted pair wire, all voice and data category rated cable, speaker wire, virtually any cable or wire!

Ideal for use with food: HACCP compliant, EN 13485 certified

Can be cleaned under running water – IP65 rated
Practical folding mechanism with rugged metal joint; easy and ready to use
Automatic final value recognition (auto-hold); min/max memory for all hold/auto-hold readings
Testo proudly presents the first waterproof folding food thermometer for the food sector – the testo 104!

Product Description
A robust metal folding joint, a rubber-coated anti-slip surface, a long and precise temperature sensor – and waterproof into the bargain! The testo 104 food probe thermometer comes with a whole host of practical features and benefits for use in the food industry.

The waterproof food thermometer for the food industry
Temperature checks play a vital role in quality assurance, cold chain documentation and hygiene regulations. The testo 104 food probe thermometer allows you to carry out quick and easy spot checks during the production, storage and processing of food. The food probe thermometer measures the core temperature of liquid, semi-solid and viscous media.

The thermometer’s especially thin but nonetheless rugged sensor tip leaves virtually no trace when inserted. The thermometer can also measure the core temperature of food when the probe has been folded out at an angle of only 30°. This allows you to carry out reliable checks in difficult-to-reach places.

The testo 104 is the only folding food thermometer for the food industry which can be cleaned under running water when you have finished measuring. The probe’s rugged metal joint allows it to be folded away and kept in its protective case until you need it again.

And here’s another practical feature: the testo 104 comes with a set of adhesive color strips which you can attach to the individual meters when more than one of the same model are being used.

The testo 104 food probe thermometer is not only HACCP compliant and EN 13485 certified but also splash water protected making it ideal for use in the food sector.

Technical Data:
Temperature NTC:
Measuring range: -50 to +250 °C
Accuracy: ±1.0 °C (-50 to -30.1 °C)
±0.5 °C (-30 to +99.9 °C)
±1 % of mv (+100 to +250 °C)
Resolution: 0.1 °C
Reaction time: t99 = 10 s

General technical data:
Dimensions: 265 x 48 x 19 mm (Probe folded out)
Operating temperature: -20 to +60 °C
Housing: ABS / TPE / PC, diecast zinc, stainless steel
Protection class: IP65
Length probe shaft: 106 mm
Length probe shaft tip: 32 mm
Diameter probe shaft: 3 mm
Diameter probe shaft tip: 2.3 mm
Futher features: Auto hold, hold, min./max.
Battery type: 2 AAA micro batteries
Battery life: 100 h (typical)
Display type: LCD
Display size:
one-line
Display ligthing: illuminated
Storage temperature: -30 to +70 °C
Weight: 165 g

Timing Tool Kit for BMW Vanos Single Valve
This comprehensive set of tools enables the correct timing positions to be achieved on both camshaft and crankshaft whilst replacing the timing belt on both petrol and diesel engines. Note that the 2.5 liter diesel engine is also used in some Range Rover Vauxhall/Opel Omega models. This set includes a special Wrench for controlled turning of the exhaust camshaft sprocket when removing and installing the VANOS unit.
Applicable: 6 cylinder engine: M52TU (1998-2000), M54 (2001-2004), & M56 (2003 to present).
Engine Applications: M42, 44, 50, 52, 52TU, 54, 56, S50Us, s52Us, M60, 62, 70, 73,
S50B30, S50B32,S54, S62

Engine Code: M42
1989 - 1996
Model Code: E30/E36
318i/318is/318ti

Engine Code: M44
1996 - 2001
Model Code: E36
318is/318ti518i/Z3 1.9

Engine Code: M50
1990 - 1996
Model Code: E34/E36
320i/325i/325is/520i/525i/525ix

Engine Code: M52
1994 - 2001
Model Code: E36/E38/E39/E46
320i/320ci/323i/323ti/328i/520i/523i/528i/528i/728i/728iL/Z3 2.8

Engine Code: M54
From 2006
Model Code: E60/E81/E82/E88/E89/E90/E91/E92/E93/F01/F10
135i/1M/335i/535i/X6 xDrive35i/Z4 sDrive35i/740i

Engine Code: M56
1996 - 2002
Model Code: E46
325iA

Engine Code: S50
1990 - 1996
Model Code: E36
M3/Z3M

Engine Code: S52
1996 - 1999
Model Code: E36/E37/E38
M3/M roadster/M coupe

Engine Code: M60
1992 - 1996
Model Code: E31/E32/E34/E38
530i/730i

Engine Code: M62
1994 - 2005
Model Code: E38/E39/E53
535i/735i/735iL/840ci/X5 4.4/X5 4.6is

Engine Code: M70
1988 - 1996
Model Code: E31/E38
750i/750iL

Engine Code: S54
2000 - 2006
Model Code: E46/E85/E86
M3/M3csl/Z3M/Z4M

Engine Code: S62
1994 - 2005
Model Code: E39/E52
M5/Z8

For quick ‘n easy air and core temperature measurements
Ideal for a variety of different applications – in kitchens, laboratories, industrial settings and garden centers
Waterproof and dishwasher safe (IP67 rated)
Includes protective case with integrated clip

The waterproof mini probe thermometer allows you to measure the air temperature and core temperature of a variety of different media in a variety of different applications. And when you’re done you can either clean your thermometer under running water – or pop it into the dishwasher if necessary.

Product Description
Low in price, high in performance: the waterproof mini probe thermometer measures the core temperature of liquid, soft and powdery media as well as the ambient air temperature.

And when you’ve carried out your measurements, you can either clean your mini probe thermometer under running water or pop it into the dishwasher before returning it to the protective case that comes with the delivery. The mini probe thermometer also has an integrated clip to stop it from slipping out of your shirt or jacket pocket.

A variety of different applications for the waterproof mini probe thermometer
From checking the Sunday roast (but don’t forget to take it out of the oven!) to carrying out temperature checks during production processes; from measuring the air temperature in air conditioning units to checking the temperature of different media in garden centers or laboratories. Because the mini probe thermometer can be used to measure both the air and the core temperature of different materials it is ideal for use in a variety of different applications and environments.

Technical data:
Temperature:
Measuring range: -20 to +230 °C
Accuracy: ±1 °C (-20 to +53.9 °C)
±0.8 °C (+54 to +90 °C)
±1 °C (+90.1 to +180 °C)
±1.5 °C (+180.1 to +230 °C)
Resolution: 0.1 °C (-19.9 to +199.9 °C)
1.0 °C (Remaining Range)

General technical data:
Dimensions: 150 x 45 x 30 (LxWxH)
Operating temperature: -10 to +50 °C
Housing: ABS
Protection class: IP67
Length probe shaft: 120 mm
Length probe shaft tip: 7.5 mm
Diameter probe shaft: 3.5 mm
Diameter probe shaft tip: 2 mm
Battery type: Button cell LR44
Display type: LCD
Display size: one-line
Storage temperature: -20 to +70 °C

Ideal for measuring the core temperature of food: HACCP compliant and EN 13485 certified when used with the TopSafe protective case
Further benefits which the TopSafe protective case has to offer: waterproof and dirt resistant, IP67 rated, dishwasherproof
Visual and audible alarm that warn when thresholds are exceeded
Further benefits which the kit has to offer: you have all the accessories you need, i.e. clip and sensor protective cap for safe storage

The testo 106 food thermometer is now available as a practical kit with useful accessories including a waterproof case and clip!

Description:
If you’re looking for a thermometer that can measure the core temperature of food quickly and reliably, then look no further! The testo 106 food probe thermometer is now available as a kit together with a protective case that ensures that your thermometer complies with EN 13485 and that it is splash water proof and protected against dirt ingress. In addition, there’s also a clip for safe and easy storage (i.e. secured to a wall or attached to your belt).

The testo 106 food thermometer – the benefits

The testo 106 HACCP compliant food probe thermometer is ideal for carrying out quick core temperature checks of different types of food.

Extremely fast results – up to two temperature measurements per second!
Visual and audible alarm: LED lights up, alarm sounds
Slim, rugged measuring tip that leaves hardly visible puncture marks
Auto hold: automatic final recognition value

Practical accessories – advantage you

TopSafe protective case:

Dishwasherproof
Waterproof and dirt resistant
IP67 rated
Complies with EN 13485 when used with the protective case

Clip with sensor protective cap:

Protects the measuring tip against damage – and the user against injury
Clip for securing thermometer to a wall or belt
Ideal for safe storage

Technical Data:

Temperature NTC:
Measuring range: -50 to +275 °C
Accuracy: ±1 % of mv (+100 to +275 °C)
±0.5 °C (-30 to +99.9 °C)
±1.0 °C (-50 to -30.10 °C)
Resolution: 0.1 °C
Reaction time: t99 = 10 s (Measured in moving liquid)
Measuring rate: 0.5 s

General technical data:
Dimensions: 215 x 34 x 19 mm
Operating temperature: -20 to +50 °C
Housing: ABS
Protection class: IP67 with TopSafe
Length probe shaft: 55 mm
Length probe shaft tip: 15 mm
Diameter probe shaft: 3 mm
Diameter probe shaft tip: 2.2 mm
Standards: EN 13485
Battery type: 3V button cell (CR 2032)
Battery life: 350 h
Display type: LCD
Display size: one-line
Storage temperature: -40 to +70 °C
Weight: 80 g

For carrying out surface and core temperature measurements
With integrated probe and infrared laser
Durable and practical: rugged folding joint, waterproof housing (IP65), fits snugly in any pocket
HACCP / EN 13485 compliant

Incoming food, food on display, food in storage: the testo 104-IR infrared probe thermometer allows you to carry out quick and reliable temperature and food safety checks in the course of your busy working day. Ideal for use in the food sector, restaurants and the retail industry.

Product Description
The testo 104-IR food safety thermometer is ideal for carrying out temperature and food safety checks. And because it fits snugly in any pocket, it’s always there when you need it to carry out checks on incoming goods, spot checks during transport or food inspections in the retail industry.

Probe thermometer and infrared thermometer rolled into one
The testo 104-IR is equipped with a high-precision 2-point laser and 10:1 optics which show the exact measurement range and allow you to carry out quick and accurate non-contact surface temperature measurements. The 2-in-1 thermometer is especially useful for checking incoming goods and for scanning the surface temperature of individual food products as well as whole pallets.

The folding probe thermometer is used to measure the core temperature of food products like meat and sausage meat for example. It generally comes into play when the infrared surface measurements are not within the prescribed thresholds. The probe can be folded away when not in use to protect against breakage.

Quick and easy to use. Tried and tested in the field
The thermometer is immediately activated when the probe sensor is folded down. Simply press a key to start the infrared measurement. The results are presented on a large, easy-to-read display. Because the keys themselves are easy to understand, there is no need to instruct individuals on how to use the thermometer. Last but by no means least, the food safety infrared thermometer is waterproof and IP65 rated.

Areas of Application
It doesn’t matter whether the food in question is being delivered, is in transit or in storage – in all three cases it is imperative that the cold chain is maintained at all times. The testo 104-IR food safety thermometer is ideal for ensuring that the prescribed temperature is maintained at each point in the cold chain. And like all the testo temperature meters for the food industry the testo 104-IR is EN 13485 certified and HACCP compliant.

Technical data:
Temperature NTC:
Measuring range: -50 to +250 °C
Accuracy: ±1 °C (-50.0 to -30.1 °C)
±0.5 °C (-30.0 to +99.9 °C)
±1 % of mv (Remaining Range)
Resolution: 0.1 °C

Temperature Infrared:
Measuring range: -30 to +250 °C
Accuracy: ±2.5 °C (-30 to -20.1 °C)
±2.0 °C (-20 to -0.1 °C)
±1.5 °C or ±1.5 % of mv (Remaining Range)
Measuring rate: 0.5 s
Infrared resolution: 0.1 °C

General technical data:
Operating temperature: -20 to +50 °C
Housing: ABS / TPE / PC, diecast zinc, stainless steel
Protection class: IP65
Laser spot: on / off
Measurement value: Temperature °C / °F / °R
Measurement mode: Hold or auto hold (immersion probe)
Dimensions (probe folded out): 281 x 48 x 21 mm
Dimensions (probe not folded out): 178 x 48 x 21 mm
Standards: EN 13485
Battery type: 2 AAA micro batteries
Battery life: 10 h
Display type: LCD
Display size: one-line
Display ligthing: illuminated
Storage temperature: -30 to +50 °C
Weight: 197 g (incl. batteries)

Continuous measurement and display of temperature and relative humidity
Calculation and display of the dew point
Large, clear display
Durable quality: capacitive humidity sensor with long-term stability for many years of measurement

The testo 608-H1 thermohygrometer enables you to have a continuous display of the current temperature and humidity values. This means you can always keep an eye on the indoor climate.

Product Description:
The testo 608-H1 thermohygrometer is ideally suited for continuous measurement of the indoor climate. You can therefore use the measuring instrument in locations such as offices, warehouses, laboratories, garden centres or living areas to determine temperature, humidity and dew point. The hanging and standing brackets enable you to either hang the thermohygrometer on the wall or to place on a table or a shelf.

Be sure to keep an eye on the indoor climate – with the testo 608-H1 thermohygrometer
We recommend you use the testo 608-H1 thermohygrometer if you are not interested in measurement data documentation and management, but just want to be able to view the current readings at any time. The thermohygrometer shows you temperature, humidity and dew point on its clear display.
The current readings are also easily legible from a distance on the large display. In addition, you can display max. and min. values.
The thermohygrometer has an NTC temperature probe which performs very precise temperature measurements and a capacitive humidity sensor which is characterized by its long-term stability. This makes the testo 608-H1 thermohygrometer a reliable and durable partner for recording the indoor climate.
The thermohygrometer's battery life is approx. one year. As soon as the battery is coming towards the end of its life, you are notified about this in good time on the display.

Technical data:
Temperature NTC:
Measuring range: 0 to +50 °C
-20 to +50 °Ctd
Accuracy: ±0.5 °C (at +25 °C)
Resolution: 0.1 °C

Humidity Capacitive:
Measuring range: 10 to 95 %RH
Accuracy: ±3 %RH (10 to 95 %RH)
Resolution: 0.1 %RH

General technical data:
Dimensions: 111 x 90 x 40 mm
Operating temperature: 0 to +50 °C
Measuring rate: 18 s
Housing: ABS
Battery type: 9V block battery, 6F22
Battery life: approx. 1 year
Display type: LCD
Display size: 2 lines
Storage temperature: -40 to +70 °C
Weight: 168 g

Wireless temperature measurement: The testo 915i thermometer with smartphone operation and Bluetooth is part of the popular Testo Smart Probes portfolio. The thermometer provides fast, reliable measurement results and is versatile and easy to use thanks to the robust probe – making it ideal for carrying out your temperature measurements, e.g. in liquids.

Smart Probe for wireless temperature measurement in a wide range of applications, thanks to a large selection of probes and compatibility with standard type K thermocouple probes.
Robust, fast-response immersion/penetration probe (TC type K, class 1) with secure attachment via innovative locking mechanism in the handle, ideal for temperature measurements in liquids, pastes and semi-solid media, measuring range -50 to +400 °C
Easy operation, evaluation and documentation with free testo Smart App as well as automatic Bluetooth connection to smartphones, tablets or Testo measuring instruments (e.g. testo 400, testo 550s) with a range of up to 100 m
High measurement accuracy thanks to system calibration ex-works

Measure temperatures in liquids, semi-solid media and pastes: The wireless thermometer testo 915i with robust, fast-response immersion/penetration probe will enable you to tackle your temperature measurements with greater speed, flexibility and ease. The testo 915i automatically connects to your smartphone/tablet or compatible testo measuring instrument via Bluetooth. The testo Smart App facilitates intuitive operation, clear display of measurement data as well as documentation and sending of reports on site. The handle is compatible with all standard type K thermocouple probes – making it versatile.

testo 915i - Thermometer with immersion/penetration probe and smartphone operation
- Robust, fast-response immersion/penetration probe (TC type K, class 1), measuring range -50 to +400 °C
- High measuring accuracy up to ±1.0 °C thanks to system calibration ex-works
- For fast, wireless temperature measurement in liquids, pastes and semi-solid media
- Innovative locking mechanism on the handle for easy, secure attachment of plug-in Testo measuring probes
- Versatile in all temperature-relevant applications: Compatible with all Testo and standard type K thermocouple probes
- testo Smart App: Display of readings, clear graphical presentation of temperature curves, create documentation on site and send as a PDF or CSV file
- Automatic Bluetooth connection to smartphones, tablets or compatible Testo measuring instruments
- Bluetooth with a range of up to 100 m
- Handy, robust housing
- Thanks to its proven quality and great durability, you can rely on your Testo Smart Probe in all conditions

Technical Data: testo 915i - Thermometer with immersion/penetration probe and smartphone operation
Temperature - TC Type K (NiCr-Ni):
Measuring range: -50 to +400 °C
Accuracy: ±1,0 °C (-50 to +100 °C) / ±1 % of mv (Remaining Range)
Resolution: 0,1 °C
Reaction time: t??: 3 s
General technical data:
Weight: immersion/penetration probe: 11 g / Bluetooth handle: 88 g
Dimensions: Bluetooth handle: 129 x 31 x 31 mm (LxWxH)
Operating temperature: -20 to +50 °C
Product-/housing material: Plastic
Protection class: IP40
System requirements: requires iOS 12.0 or newer; requires Android 6.0 or newer; requires mobile end device with Bluetooth 4.0
Product colour: black/orange
Plug-in probe connection: Lockable connection to 4 standard probes testo 915i; Standard plug-in connection to other common TC probes
Length probe shaft: 115 mm
Diameter probe shaft: 5 mm
Diameter probe shaft tip: 3 mm
Battery type: 3 AAA micro batteries
Battery life: 150 h
Data transfer: Bluetooth; automatic connection to testo Smart App and Testo measuring instruments
Radio range: 100 m
Storage temperature: -20 to +60 °C

Measurement of the flow and return temperature of heating systems
Measurement of temperatures in refrigeration systems in order to calculate superheating and subcooling
Easy to use at measuring points that are far apart
Rapid detection of temperature changes via graphical progress display

Combined with a smartphone or tablet, the testo 115i clamp thermometer is the ideal temperature measuring instrument for carrying out servicing and troubleshooting on air conditioning and refrigeration systems, as well as for installing them. It can also be used to measure flow and return temperatures.

Product Description
Professional measuring technology is now mobile: when it comes to temperature measurements at widely spaced measuring points in particular, the testo 115i makes things much easier – thanks to a wireless connection to the smartphone or tablet. When used in conjunction with the testo 549i pressure measuring instrument, individual refrigeration system parameters can also be calculated.

Measuring using the App offers lots of advantages
Measurement data is transmitted wirelessly from the clamp thermometer to the testo Smart Probes App and can be viewed conveniently on your smartphone or tablet – either as a chart or in table form. Temperature changes are therefore immediately evident. The measurement data log can be emailed directly as a PDF or Excel file. This saves you time, allowing you to further increase your efficiency.

System requirements:
iOS 8.3 or later
Android 4.3 or later
Bluetooth 4.0

Technical data:
Temperature NTC:
Measuring range: -40 to +150 °C
Accuracy: ±1.3 °C (-20 to +85 °C)
Resolution: 0.1 °C

General technical data:
Dimensions: 183 x 90 x 30 mm
Operating temperature: -20 to +50 °C
System requirements: requires iOS 8.3 or newer; requires Android 4.3 or newer; requires mobile end device with Bluetooth 4.0
Battery type: 3 AAA micro batteries
Battery life: 150 h
Storage temperature: -20 to +60 °C