Continuous measurement and display of temperature and relative humidity
Calculation and display of the dew point
Large, clear display
Durable quality: capacitive humidity sensor with long-term stability for many years of measurement

The testo 608-H1 thermohygrometer enables you to have a continuous display of the current temperature and humidity values. This means you can always keep an eye on the indoor climate.

Product Description:
The testo 608-H1 thermohygrometer is ideally suited for continuous measurement of the indoor climate. You can therefore use the measuring instrument in locations such as offices, warehouses, laboratories, garden centres or living areas to determine temperature, humidity and dew point. The hanging and standing brackets enable you to either hang the thermohygrometer on the wall or to place on a table or a shelf.

Be sure to keep an eye on the indoor climate – with the testo 608-H1 thermohygrometer
We recommend you use the testo 608-H1 thermohygrometer if you are not interested in measurement data documentation and management, but just want to be able to view the current readings at any time. The thermohygrometer shows you temperature, humidity and dew point on its clear display.
The current readings are also easily legible from a distance on the large display. In addition, you can display max. and min. values.
The thermohygrometer has an NTC temperature probe which performs very precise temperature measurements and a capacitive humidity sensor which is characterized by its long-term stability. This makes the testo 608-H1 thermohygrometer a reliable and durable partner for recording the indoor climate.
The thermohygrometer's battery life is approx. one year. As soon as the battery is coming towards the end of its life, you are notified about this in good time on the display.

Technical data:
Temperature NTC:
Measuring range: 0 to +50 °C
-20 to +50 °Ctd
Accuracy: ±0.5 °C (at +25 °C)
Resolution: 0.1 °C

Humidity Capacitive:
Measuring range: 10 to 95 %RH
Accuracy: ±3 %RH (10 to 95 %RH)
Resolution: 0.1 %RH

General technical data:
Dimensions: 111 x 90 x 40 mm
Operating temperature: 0 to +50 °C
Measuring rate: 18 s
Housing: ABS
Battery type: 9V block battery, 6F22
Battery life: approx. 1 year
Display type: LCD
Display size: 2 lines
Storage temperature: -40 to +70 °C
Weight: 168 g

Easy to operate and use: lockable probe for a secure hold
Temperature measuring instrument with connected probe is waterproof (IP 67)
Includes softcase and probe type T
HACCP-compliant and certified to EN 13485

The testo 108-2 temperature measuring instrument can be used for quick spot temperature measurement in the food sector. Compared with the testo 108, the advantage of the testo 108-2 is that the probe can be locked on the temperature measuring instrument, ensuring a secure hold.

Product Description:
In the food sector, temperature measurements are part of the daily routine. The only way you can thoroughly check and guarantee the quality of your products is with precise measurement.

The testo 108-2 temperature measuring instrument allows spot measurements in seconds. For transportation and storage of food, in restaurants, in large-scale kitchens and in the food service industry. The testo 108-2 temperature measuring instrument allows temperature measurement to be integrated into daily work routines with no added complications. And you do not have to worry about the obligatory HACCP regulations.

Advantages of the testo 108-2 temperature measuring instrument at a glance:
Lockable probe for a secure hold
Auto-hold, hold and min./max. function Function
Applicable everywhere in the food sector
Easy handling even by frequently changing staff
Probe can be stowed directly in the softcase
Temperature measuring instrument with connected probe is waterproof in compliance with IP 67
Large, clear display

Technical data:
Temperature TC Type T (Cu-CuNi):
Measuring range: -50 to +300 °C
Accuracy: ±0.5 °C (-30 to +70 °C)
±0.5 °C ±0.5 % of mv (Remaining Range)
Resolution: 0.1 °C

General technical data:
Reaction time: 10 s (measured in moving liquid)
Dimensions: 140 x 60 x 24.5 mm
Operating temperature: -20 to +60 °C
Housing: ABS / ABS-PC fibre glass 10%
Protection class IP67 with TopSafe
Measuring rate: 2 measurements per second
Futher features: Auto-hold, hold and min./max. function
Standards:EN 13485
EU-/EG-guidelines: 2004/108/EG
Battery type: 3 AAA micro batteries
Battery life: 2500 h (typical, at 23 °C)
Display type: LCD
Display size: one-line
Display function: with status line
Storage temperature: -30 to +70 °C
Weight: 150 g (instrument incl. battery, without soft case)

Easy parametrization of the outlet/duct cross-section for measuring the volume flow
List of multiple volume flows and calculation of the total volume flow (in the log)
Identification of mould risk thanks to the combined utilization of testo 605i and testo 805i
Rapid image documentation with IR temperature readings and measuring spot marking

With the Testo Smart Probes VAC set, you can check air velocities, humidity, volume flows and temperatures in, on and around air conditioning systems. The robust testo Smart Case enables the measuring instruments to be conveniently transported and ensures that they are always to hand when needed.

Product Description:
The compact testo Smart Probes VAC set includes four measuring instruments that can be used with your smartphone/tablet for key measuring tasks carried out by VAC engineers: the testo 405i thermal anemometer. the testo 410i vane anemometer, the testo 605i thermohygrometer and the testo 805i infrared thermometer.

Advantages of the testo Smart Probes VAC set
The measuring instruments in the testo Smart Probes VAC set can be connected quickly and easily to your smartphone or tablet via Bluetooth. You can therefore measure air velocities, humidity, volume flows and temperatures with intuitive ease using the testo Smart Probes App. The measuring instruments are easy to transport in the handy testo Smart Case and always to hand when needed.

Advantages and applications of the individual measuring instruments:

testo 405i: thermal anemometer with smartphone operation
Measurement of air velocity, volume flow and temperature
Simple configuration of the dimension and geometry of the duct cross-section for measuring the volume flow
Telescopic tube which can be extended to 400 mm

testo 410i: vane anemometer with smartphone operation
Measurement of air velocity, volume flow and temperature
Display of the volume flow of multiple outlets in order to adjust systems
Easy parametrization of the outlet (dimension and geometry)

testo 605i: Thermohygrometer with smartphone operation
Measurement of air humidity and temperature in rooms and ducts
Automatic calculation of the dew point and wet-bulb temperature

testo 805i: infrared thermometer with smartphone operation
Non-contact infrared measurement of surface temperature
Measuring spot marking via highly visible 8-point laser circle
Easy selection of emission level via stored materials list
Image documentation with readings and measuring spot marking

Practical App with special functions for measurement data analysis on your smartphone or tablet
Measurement data is transmitted wirelessly from the relevant measuring instrument to the testo Smart Probes App and can be viewed conveniently on mobile terminal devices – either as a chart or in table form. The App also offers practical functions such as timed and multi-point mean calculation, volume flow configuration, comparison of several volume flows at various outlets, automatic calculation of the dew point and wet-bulb temperature and identification of areas susceptible to mould via a clear traffic light system. The measurement data log can be emailed directly as a PDF or Excel file. This saves you time, allowing you to further increase your efficiency.

System requirements:
iOS 8.3 or later
Android 4.3 or later
Bluetooth 4.0

Technical data:
Temperature NTC:
Measuring range: -20 to +60 °C (testo 405i + testo 410i + testo 605i)
Accuracy: ±0.5 °C (testo 405i + testo 410i)
±0.8 °C (-20 to 0 °C) (testo 605i)
±0.5 °C (0 to +60 °C) (testo 605i)
Resolution: 0.1 °C (testo 405i + testo 410i + testo 605i)

Temperature Infrared:
Measuring range: -30 to +250 °C
Accuracy: ±1.5 °C or ±1.5 % of mv (0 to +250 °C)
±2 °C (-20 to -0.1 °C)
±2.5 °C (-30 to -20.1 °C)
Resolution: 0.1 °C

Humidity Capacitive:
Measuring range: 0 to 100 %RH
Accuracy: 5 to 80 %RH: ±(1.8 %RH + 3 % of mv) at +25 °C
Resolution: 0.1 %RH

Velocity Hot wire:
Measuring range: 0 to 30 m/s
Accuracy: ±(0.1 m/s + 5 % of mv) (0 to 2 m/s)
±(0.3 m/s + 5 % of mv) (2 to 15 m/s)
Resolution: 0.01 m/s

General technical data:
Dimensions: 200 x 30 x 41 mm (testo 405i)
140 x 36 x 25 mm (testo 805i)
154 x 43 x 21 mm (testo 410i)
243 x 30 x 24 mm (testo 605i)
Operating temperature: -20 to +50 °C (testo 405i + testo 410i + testo 605i)
-10 to +50 °C (testo 805i)
System requirements: requires Android 4.3 or newer; requires mobile end device with Bluetooth 4.0
Battery type: 3 micro batteries AAA (per Smart Probe)
Battery life: 15 h (testo 405i), 130 h (testo 410i), 150 h (testo 605i), 30 h (testo 805i)
Storage temperature: -20 to +60 °C
Diameter vane: 40 mm (testo 410i)

For carrying out temperature checks in the food industry
Ready to go. One probe temperature sensor included, further type K and T temperature sensors (optional) can be connected
Digital food thermometer also waterproof with connected probe sensor (IP67 protected)
HACCP and EN 13485 compliant

For super-fast spot checks and reliable results. The testo 108 waterproof food thermometer for measuring temperatures during food production, processing and storage. For carrying out super fast and reliable temperature checks during food production, processing and storage.

Product Description:
Temperature measurements are one of the most essential elements of quality control in the food industry. But there are two conditions which have to be met. They have to be fast and they have to be reliable.

The testo 108 digital food thermometer ticks the box on both counts. It is fast. It is reliable. And there are added benefits too:
Ideal for all sectors of the food industry. From buying to transport, from storage to production and control
Protective softcase and type T thermocouple probe sensor included
Super fast measurements, super reliable readings
Easy to use with self-explanatory keys and large, easy-to-read display. No need for lengthy instructions
Hygienic: softcase and food thermometer/sensor can be easily cleaned under running water
HACCP and EN 13485 compliant

Areas of application for the testo 108 digital food thermometer
Ideal for use during transport or storage of food, in restaurants, canteen kitchens or system catering: the testo 108 digital food thermometer enables you to integrate your temperature measurements effortlessly into your daily routine while making sure that the quality of your food complies with HACCP regulations.

Technical data:
Temperature TC Type K (NiCr-Ni):
Measuring range: -50 to +300 °C
Accuracy: ±0.5 °C (-30 to +70 °C)
±0.5 °C ±0.5 % of mv (Remaining Range)
Resolution: 0.1 °C

Temperature TC Type T (Cu-CuNi):
Measuring range: -50 to +300 °C
Accuracy: ±0.5 °C (-30 to +70 °C)
±0.5 °C ±0.5 % of mv (Remaining Range)
Resolution: 0.1 °C

General technical data:
Reaction time: 10 s (measured in moving liquid)
Dimensions: 140 x 60 x 24.5 mm
Operating temperature: -20 to +60 °C
Housing: ABS / ABS-PC fibre glass 10%
Protection class: IP67 with TopSafe
Measuring rate: 2 measurements per second
Standards: EN 13485
EU-/EG-guidelines: 2004/108/EG
Battery type: 3 AAA micro batteries
Battery life: 2500 h (typical, at 23 °C)
Display type: LCD
Display size: one-line
Display function: with status line
Storage temperature: -30 to +70 °C
Weight: 150 g (instrument incl. battery, without soft case)

For measuring volume flow, air velocity and temperature
Simple configuration of the dimension and geometry of the duct cross-section for determining the volume flow
Convenient for working in ventilation ducts thanks to its telescopic tube, which can be extended up to 400 mm
Really convenient to operate thanks to the testo Smart Probes App (e.g. easy viewing of readings, measurement data trend, log function)

With the testo 405i hot wire anemometer, you can measure air velocities, temperatures and volume flows. Via Bluetooth, the readings are transmitted wirelessly straight to the testo Smart Probes App on your smartphone or tablet. You can view the values conveniently and use numerous intelligent features.

Product Description:
No more surprises: the testo 405i thermal anemometer with smartphone operation from the Testo Smart Probes series is ideal for carrying out measuring tasks in ventilation ducts. It is easy to use the anemometer to determine air velocity, temperature and volume flows. The testo 405i is also suitable for measuring indoor air velocity. Practical when, for example, you want to locate non-airtight windows. Cooling capacities and heating outputs can also be calculated when used in conjunction with the testo 605i thermohygrometer.

Operation independent of measuring location via your smartphone
The testo 405i hot wire anemometer combines professional Testo measuring technology with App-based operation. This means you benefit from numerous additional functions in your day-to-day work. With the testo Smart Probes App, you can view readings conveniently on your smartphone or tablet. You no longer have to spend ages trying to make out the display at poorly accessible points. Volume flow can also be measured easily using the App: following intuitive input of the duct cross-section, the App calculates this completely automatically.

The App opens up other practical options too: it not only displays measurement data, but also evaluates and documents it. It is easy to carry out a timed and multi-point mean calculation with the App. It also displays the measurement data curve at the press of a button. And sends the measurement data logs as PDF or Excel files.

System requirements:
iOS 8.3 or later
Android 4.3 or later
Bluetooth 4.0

Technical data:
Temperature NTC:
Measuring range: -20 to +60 °C
Accuracy: ±0.5 °C
Resolution: 0.1 °C

Velocity Hot wire:
Measuring range: 0 to 30 m/s
Accuracy: ±(0.1 m/s + 5 % of mv) (0 to 2 m/s)
±(0.3 m/s + 5 % of mv) (2 to 15 m/s)
Resolution: 0.01 m/s

General technical data:
Dimensions: 200 x 30 x 41 mm: Operating temperature: -20 to +50 °C
System requirements: requires iOS 8.3 or newer; requires Android 4.3 or newer; requires mobile end device with Bluetooth 4.0
Battery type: 3 AAA micro batteries
Battery life: 15 h
Length probe shaft: 400 mm
Storage temperature: -20 to +60 °C

Wireless temperature measurement: The testo 915i thermometer with smartphone operation and Bluetooth is part of the popular Testo Smart Probes portfolio. The thermometer provides fast, reliable measurement results and is versatile and easy to use thanks to the robust probe – making it ideal for carrying out your temperature measurements, e.g. in liquids.

Smart Probe for wireless temperature measurement in a wide range of applications, thanks to a large selection of probes and compatibility with standard type K thermocouple probes.
Robust, fast-response immersion/penetration probe (TC type K, class 1) with secure attachment via innovative locking mechanism in the handle, ideal for temperature measurements in liquids, pastes and semi-solid media, measuring range -50 to +400 °C
Easy operation, evaluation and documentation with free testo Smart App as well as automatic Bluetooth connection to smartphones, tablets or Testo measuring instruments (e.g. testo 400, testo 550s) with a range of up to 100 m
High measurement accuracy thanks to system calibration ex-works

Measure temperatures in liquids, semi-solid media and pastes: The wireless thermometer testo 915i with robust, fast-response immersion/penetration probe will enable you to tackle your temperature measurements with greater speed, flexibility and ease. The testo 915i automatically connects to your smartphone/tablet or compatible testo measuring instrument via Bluetooth. The testo Smart App facilitates intuitive operation, clear display of measurement data as well as documentation and sending of reports on site. The handle is compatible with all standard type K thermocouple probes – making it versatile.

testo 915i - Thermometer with immersion/penetration probe and smartphone operation
- Robust, fast-response immersion/penetration probe (TC type K, class 1), measuring range -50 to +400 °C
- High measuring accuracy up to ±1.0 °C thanks to system calibration ex-works
- For fast, wireless temperature measurement in liquids, pastes and semi-solid media
- Innovative locking mechanism on the handle for easy, secure attachment of plug-in Testo measuring probes
- Versatile in all temperature-relevant applications: Compatible with all Testo and standard type K thermocouple probes
- testo Smart App: Display of readings, clear graphical presentation of temperature curves, create documentation on site and send as a PDF or CSV file
- Automatic Bluetooth connection to smartphones, tablets or compatible Testo measuring instruments
- Bluetooth with a range of up to 100 m
- Handy, robust housing
- Thanks to its proven quality and great durability, you can rely on your Testo Smart Probe in all conditions

Technical Data: testo 915i - Thermometer with immersion/penetration probe and smartphone operation
Temperature - TC Type K (NiCr-Ni):
Measuring range: -50 to +400 °C
Accuracy: ±1,0 °C (-50 to +100 °C) / ±1 % of mv (Remaining Range)
Resolution: 0,1 °C
Reaction time: t??: 3 s
General technical data:
Weight: immersion/penetration probe: 11 g / Bluetooth handle: 88 g
Dimensions: Bluetooth handle: 129 x 31 x 31 mm (LxWxH)
Operating temperature: -20 to +50 °C
Product-/housing material: Plastic
Protection class: IP40
System requirements: requires iOS 12.0 or newer; requires Android 6.0 or newer; requires mobile end device with Bluetooth 4.0
Product colour: black/orange
Plug-in probe connection: Lockable connection to 4 standard probes testo 915i; Standard plug-in connection to other common TC probes
Length probe shaft: 115 mm
Diameter probe shaft: 5 mm
Diameter probe shaft tip: 3 mm
Battery type: 3 AAA micro batteries
Battery life: 150 h
Data transfer: Bluetooth; automatic connection to testo Smart App and Testo measuring instruments
Radio range: 100 m
Storage temperature: -20 to +60 °C

Non-contact infrared measurement of surface temperature
Easy selection of emission level via stored materials list
Highly visible marking of the measuring spot thanks to 8-point laser
Image documentation with readings and measuring spot marking

Carry out non-contact and App-controlled measurement of wall temperatures, as well as fuse and component temperatures in air conditioning systems: with the professional testo 805i infrared thermometer with 8-point laser circle for highly visible measuring spot marking.

Product Description:
The testo 805i infrared thermometer, in conjunction with a smartphone or tablet, functions as a compact IR thermometer for wall temperatures, as well as fuse and component temperatures in air conditioning systems. The measuring point is marked clearly with a laser circle made up of eight dots – so you always know precisely where to measure.

Documentation including images via App on a smartphone/tablet
With the testo Smart Probes App installed on a terminal device, users can view their readings conveniently. And that's not all: the App can also be used to create and document images, including temperature values and laser marking. A separate measurement menu makes it easier to detect areas that are susceptible to mould. Particularly useful: a list containing the emission levels of certain materials is already stored in the App, so there's no longer any need to waste your time looking these up in tables. All measurement data is displayed either as a chart or in table form. The measurement data log can then be emailed directly as a PDF or Excel file.

System requirements:
iOS 8.3 or later
Android 4.3 or later
Bluetooth 4.0

Technical data:
Temperature Infrared:
Measuring range: -30 to +250 °C
Accuracy: ±1.5 °C or ±1.5 % of mv (0 to +250 °C)
±2 °C (-20 to -0.1 °C)
±2.5 °C (-30 to -20.1 °C)
Resolution: 0.1 °C

General technical data:
Dimensions: 140 x 36 x 25 mm
Operating temperature: -10 to +50 °C
System requirements: requires iOS 8.3 or newer; requires Android 4.3 or newer; requires mobile end device with Bluetooth 4.0
Battery type: 3 AAA micro batteries
Battery life: 30 h
Storage temperature: -20 to +60 °C

The testo 815 sound level meter can be used for control measurements in the air conditioning and heating area, on combustion systems or at workplaces. It can also enable quick and precise assessment of machinery and discotheque noise.

Frequency evaluation according to characteristic curves A and C
Easy to adjust (adjustment screwdriver included in the scope of delivery)
Min./max. memory
Integrated tripod knuckle screw (1/4 inch)

Determine the noise level quickly, easily and reliably in your day-to-day work: with the testo 815 sound level meter.

Applications of the testo 815 sound level meter
- Heating technology: measurement of the volume of burners
- Industry and trade: measurement of machinery noise
- Event technology or public authorities: noise levels at events
- Building services: simple measurements by the caretaker when there are complaints

General technical data:
Weight: 195 g
Dimensions: 255 x 55 x 43 mm
Operating temperature: 0 to +40 °C
Product-/housing material: ABS
Frequency weighting: A/C
Section measuring range: 30 - 80 dB; 50 - 100 dB; 80 - 130 dB
Time weighting: FAST 125 ms setting / SLOW 1 s setting
Pressure dependency: -0,002 dB/hPa
Battery type: 9V block battery, 6F22
Battery life: 70 h
Storage temperature: -10 to +60 °C
Sound Pressure:
Measuring range: +32 to +130 dB
Frequence range: 31,5 Hz to 8 kHz
Accuracy: ±1,0 dB
Resolution: 0,1 dB
Measuring rate: 5 s

Measurement of air velocity, volume flow and temperature
Display of the volume flow of multiple outlets in order to adjust systems
Easy parametrization of the outlet (dimension and geometry)
Convenient viewing of readings on a smartphone/tablet with the testo Smart Probes App

Professional measuring technology in a small format: the compact testo 410i vane anemometer with smartphone operation measures the volume flow, air velocity and temperature at air outlets quickly and reliably. The testo Smart Probes App enables readings to be viewed conveniently and offers intelligent additional functions.

Product Description:
It fits perfectly into any shirt pocket: the testo 410i vane anemometer is ideal for measuring air velocity and temperature at air outlets and ventilation grilles. Even measuring and adjusting the volume flow is easy. The testo 410i gives you huge flexibility, so you can adapt to any unplanned measuring requirements in your everyday work.
Measuring convenience thanks to the App
The testo 410i combines professional Testo measuring technology with the efficient functions of an App. Your smartphone or tablet is used as a convenient display for your measuring values on site. You can view all measurement data via the testo Smart Probes App, and email the log immediately as a PDF or Excel file.

Configuration of the volume flow measurement is really easy with the App, partly due to the fact that you can carry out parametrization of the outlet (dimension, geometry) intuitively. Particularly useful: when adjusting a ventilation system, volume flows of multiple outlets can be cross-checked and compared. Timed and multi-point mean calculation also gives you a quick indication of the average air velocity, for example at a ventilation grille.

System requirements:
iOS 8.3 or later
Android 4.3 or later
Bluetooth 4.0

Technical data:
Temperature NTC:
Measuring range: -20 to +60 °C
Accuracy: ±0.5 °C
Resolution: 0.1 °C

Velocity Vane:
Measuring range: 0.4 to 30 m/s
Accuracy: ±(0.2 m/s + 2 % of mv) (0.4 to 20 m/s)
Resolution: 0.1 m/s

General technical data:
Dimensions: 154 x 43 x 21 mm: Operating temperature: -20 to +50 °C
System requirements: requires iOS 8.3 or newer; requires Android 4.3 or newer; requires mobile end device with Bluetooth 4.0
Battery type: 3 AAA micro batteries
Battery life: 130 h
Diameter vane: 40 mm
Storage temperature: -20 to +60 °C

Fully retractable pincer arm for maximum flexibility
Auto AC/DC
Large two-line display

The testo 770-1 clamp meter is ideally suited for non-contact current measurement on tightly packed power cables or conductors with a small diameter. The unique grab mechanism means you can grab each individual cable easily and safely.

Product Description:
This clamp meter means you can cope in any application environment, no matter how tight. The movable pincer arm can be fully retracted into the instrument, so that you can for instance grab tightly packed cables in switching cabinets as if you were using a hook. You have never been able to measure as conveniently as this in tight spots.

The operation of the testo 770-1 clamp meter is also easier and more reliable than ever before. It automatically detects and selects AC/DC and other electrical parameters, such as resistance, continuity, diode and capacitance. In addition, you can also use it to measure the starting current. And the two-line display presents your readings clearly and distinctly.

Technical data:
DC voltage:
Measuring Range: 1 to 600.0 V
Resolution: 1 mV
Accuracy: ±(0.8 % of mv + 3 Digit)

AC voltage:
Measuring Range: 1.0 mV to 600 V
Resolution: 1 mV
Accuracy: ±(1.0 % of mv + 3 Digit)

DC current:
Measuring Range: 0.1 to 400 A
Resolution: 0.1 A
Accuracy: ±(2 % of mv + 5 Digit)

AC current:
Measuring Range: 0.1 to 400 A
Resolution: 0.1 A
Accuracy: ±(2 % of mv + 5 Digit)

Resistance:
Measuring Range: 0.1 Ohm to 40.00 MOhm
Resolution: 0.1 Ohm
Accuracy: ±(1.5 % of mv + 3 Digit)

Capacitance:
Resolution: 0.01 nF
Measuring Range: 10 nF to 100.0 μF
Accuracy: ±(1.5 % of mv + 5 Digit)

Frequency:
Measuring Range: 10 nF to 100.0 μF
Accuracy: ±(0.1 % + 1 Digit)

General technical data:
Dimensions: 249 x 96 x 43 mm
Operating temperature: -10 to +50 °C
Storage temperature: -15 to +60 °C
Weight: 378 g
Overvoltage Category: CAT IV 600V; CAT III 1000V
Authorizations: CSA; CE

Instrument Measurement Functions:
Diode test: yes
Continuity testing: yes
Display ligthing: yes
Hold: yes
MinMax: yes
True RMS: yes
Inrush current measurement: yes
Display (counts): 4,000
Autom. measurement parameter detection: yes

True root mean square measurement TRMS
Current measurement in the µA range
Integrated temperature adapter
Low-pass filter for accurate measurement results on frequency converter controlled motors

The testo 760-2 digital multimeter is the allrounder for all important electrical measuring tasks. Thanks to the automatic detection of measurement parameters, it offers the greatest possible reliability for every application. You can also measure current in the µA range and determine the true root mean square using this digital multimeter.

Product Description:
The testo 760-2 digital handheld multimeter means you can measure electrical parameters more easily and reliably than ever before. In contrast to other multimeters, the testo 760-2 automatically detects the appropriate measurement parameter via the socket assignment – and therefore rules out any dangerous incorrect settings.

It is not operated conventionally by a dial, but with illuminated function keys. This means you can easily control the measuring instrument with just one hand. The large, illuminated display shows the readings clearly.

The testo 760-2 digital multimeter has the most important functions for measuring current, voltage and resistance. The measurement of current strength is also possible in the µA range thanks to the larger measuring range. And the integrated low-pass filter achieves more accurate measurement results on frequency converter controlled motors.
Temperatures can also be measured with this multimeter in addition to electrical parameters.

Technical data:
Temperature TC Type K (NiCr-Ni):
Measuring range: -20 to +500 °C
Accuracy: ±1 °C (0 to +100 °C)
Resolution: 0.2 °C

DC voltage:
Measuring Range: 0.1 to 600 V
Resolution: 0.1 mV
Accuracy: ± (0.8 % of mv + 3 Digit)

AC voltage:
Measuring Range: 0.1 mV to 600 V
Resolution: 0.1 mV
Accuracy: ± (1.0 % of mv + 3 Digit)

DC current:
Measuring Range: 0.1 μA to 10 A
Resolution: 0.1 μA
Accuracy: ± (1.5 % of mv + 5 Digit)

AC current:
Measuring Range: 0.1 μA to 10 A
Resolution: 0.1 μA
Accuracy: ± (1.5 % of mv + 5 Digit)

Resistance:
Measuring Range: 0.1 Ohm to 60.00 MOhm
Resolution 0.1
Accuracy: ± (1.5 % of mv + 3 Digit)

Capacitance:
Resolution: 0.01 nF
Measuring Range: 2 nF to 30.00 mF
Accuracy: ± (1.5 % of mv + 5 Digit)

Frequency:
Resolution: 0.001 Hz
Measuring Range: 0.001 to 600 Hz
Accuracy: ± (0.1 % of mv + 1 Digit)

General technical data:
Dimensions: 167 x 85 x 45 mm
Operating temperature: -10 to +50 °C
Protection class: IP64
Storage temperature: -15 to +60 °C
Weight: 340 g
Overvoltage Category: CAT III 1000V; CAT IV 600V
Authorizations: CSA; CE

Instrument Measurement Functions:
Diode test: yes
Continuity testing: yes
Current probe measurement with adapter: yes
Display ligthing: yes
Hold: yes
MinMax: yes
Temperature measurement with adapter: yes
True RMS: yes
Low-pass filter: yes
Duty cycle measurement: yes
Display (counts): 6,000
μA current measuring range: yes
Autom. measurement parameter detection: yes

Intuitive: clearly structured measurement menu for volume flow and determination of air velocity in ventilation ducts
Convenient: integrated telescope that can be extended to 0.85 m, with scaling, makes it easy to carry out measurements
Reliable: internal data storage and USB port for data export
As multifaceted as your challenges themselves: the air velocity and IAQ measuring instrument can be expanded with a large portfolio of digital probes

Kit for carrying out measurements in ventilation ducts: the testo 440 air velocity and IAQ measuring instrument and the vane probe (Ø 16 mm) are safely stowed away in the case. So you can get down to work straight away!

Product Description:
Use this practical kit to measure flow velocity and volume flow in ventilation ducts. The testo 440 multifunction measuring instrument and the vane probe feature an intelligent calibration concept, ease of use and maximum convenience for the adjustment of air-conditioning and ventilation systems.

testo 440 16 mm Vane Kit in detail
testo 440 air velocity and IAQ measuring instrument:
No task is too challenging, no application too specialized: the testo 440 combines a compact hand-held measuring instrument with intuitive measurement menus and a wide selection of air velocity and IAQ probes (please order separately)
Clearly structured measurement menus: the volume flow is precisely calculated thanks to convenient input of the size and geometry of the duct cross-section. Timed and multi-point mean calculation, average volume flow, current reading and min./max. values are displayed
Other practical measurement menus, e.g. long-term measurement, volume flow measurement with a funnel, etc.
Easy storage and evaluation of measurement data. Measurement data memory for up to 7500 measurement protocols, which can be read via a USB port and further processed as a CSV file on the computer (e.g. with Excel)
Practical magnets for easy attachment of the measuring instrument to metal surfaces (e.g. ducts)
Automatic detection of probes, e.g. vane probe
Large, backlit colour display

Vane probe (Ø 16 mm):
Use the vane probe to measure air velocity and volume flow in ventilation ducts
Measuring range from 0.6 to 50 m/s
Telescope that can be extended to 0.85 m makes it easy to measure in ventilation ducts. Easy-to-read immersion depth thanks to scaling on the telescope
Use the fixed cable to connect the vane probe to the testo 440 air velocity and IAQ measuring instrument
Intelligent calibration concept: the air velocity and IAQ measuring instrument remains in continuous use, since only the vane probe is sent in for calibration

Technical data:
Temperature NTC:
Measuring range: -40 to +150 °C
Accuracy: ±0.4 °C (-40 to -25.1 °C)
±0.3 °C (-+25 to +74.9 °C)
±0.4 °C (+75 to +99.9 °C)
±0.5 % of mv (Remaining Range)
Resolution: 0.1 °C

Temperature TC Type K (NiCr-Ni):
Measuring range: -200 to +1370 °C
Accuracy: ±(0.3 °C + 0.3 % of mv)
Resolution: 0.1 °C

General technical data:
Dimensions: 154 x 65 x 32 mm
Operating temperature: -20 to +50 °C
Connectable probes: 1 x digital probe with cable or 1 x Temperature NTC TUC, 1 x digital Bluetooth probe or testo Smart Probe, 1 x Temperature TC Type K
Battery type: 3 AA mignon 1.5 V
Battery life: 12 h (typically vane measurement)
Data transfer: Bluetooth®; USB interface
Storage temperature: -20 to +50 °C
Weight: 250 g

Automatic calculation of the dew point and wet-bulb temperature
Measurement data analyzed and sent via testo Smart Probes App
Clear identification of areas susceptible to mould via traffic light principle

The compact testo 605i temperature and humidity measuring instrument features professional measuring technology in an intelligent format: it can be used in conjunction with a smartphone/tablet and the testo Smart Probes App to reliably measure air temperature and humidity in rooms and ducts.

Product Description:
In addition to measuring air temperature and relative humidity in rooms and ducts, the thermohygrometer is also suitable for checking air conditioning system humidifiers. When you use the testo 605i in conjunction with the testo 805i infrared thermometer, you can clearly identify areas susceptible to mould via the traffic light principle, with the assistance of a measurement menu that is already stored in the App.

Measure more efficiently using the App
The testo 605i wirelessly transmits the measurement data via Bluetooth to your own smartphone or tablet. With the testo Smart Probes App installed on your terminal device, you can view your readings conveniently. The App also enables the dew point and wet-bulb temperature to be determined automatically. All measurement data is displayed either as a chart or in table form. The measurement data log can then be emailed directly as a PDF or Excel file.

System requirements:
iOS 8.3 or later
Android 4.3 or later
Bluetooth 4.0

Technical data:
Temperature NTC:
Measuring range: -20 to +60 °C
Accuracy: ±0.8 °C (-20 to 0 °C)
±0.5 °C (0 to +60 °C)
Resolution: 0.1 °C

Humidity Capacitive:
Measuring range: 0 to 100 %RH
Accuracy: 5 to 80 %RH: ±(1.8 %RH + 3 % of mv) at +25 °C
Resolution: 0.1 %RH
General technical data:
Dimensions: 243 x 30 x 24 mm
Operating temperature: -20 to +50 °C
System requirements: requires iOS 8.3 or newer; requires Android 4.3 or newer; requires mobile end device with Bluetooth 4.0
Battery type: 3 AAA micro batteries
Battery life: 150 h
Length probe shaft: 100 mm
Storage temperature: -20 to +60 °C

Capacitive oil sensor from Testo, together with its needs-based design, make it possible to take measurements in hot oil (user is protected from the heat of the deep fat fryer).

IP 65: protected against water jets without a protective cover.

Clear, visual alarm indication via highly-visible alarm backlight in traffic light colours.

Washable case for hygienically stowing away at the application site.

A visual or odor check is not sufficient to verify whether the quality of the cooking oil is still good. Chain restaurateurs with the testo 270 cooking oil tester only need to change the cooking oil once critical TPM values are reached. This saves them from changing the cooking oil more frequently than is necessary, enabling them to also benefit from the associated cost savings.

Product Description:
Change cooking oil at the right time and save money: the testo 270 enables you to work more reliably, intuitively and efficiently. You will find this cooking oil tester to be a competent assistant, helping you achieve impeccable quality assurance when it comes to your frying processes. Easy cooking oil monitoring using the testo 270 will enable you to comply with critical TPM values and to change the oil at just the right time.

With the testo 270, you can take measurements directly in hot oil in a variety of deep fat fryers without any waiting time. The cooking oil tester offers numerous advantages, such as a removable, dishwasher-safe case, an unbreakable oil sensor, easy 3-button operation, and lots more.

Robust, simple and convenient for the kitchen:
With its reliable measuring technology, the testo 270 cooking oil tester is your competent partner when it comes to ensuring quality assurance for your deep fat fryer, whether you are using the instrument in your restaurant business, commercial kitchen, in catering, food inspection, or in the quality assurance or production of food.

At the same time, the cooking oil tester is easy to use: you can set the required TPM limit values in advance and protect them from being modified inadvertently with a PIN. The cooking oil tester's display helps you during the measurement itself: it flashes until a stable reading is reached. The display signalling function in traffic light colors (red, yellow and green) enables quick identification of the measurement result range. Naturally, the accurate reading in %TPM can also be read off on the display.

All the advantages of the testo 270 cooking oil tester at a glance
- Simple: self-explanatory operation with 3-level alarm backlight. Testo's capacitive oil sensor makes it possible to carry out back-to-back measurements in hot fat, even without needing to wait for the cooking oil tester to cool down
- Accurate: calibration possible at the measuring location using the reference oil.
- Robust: the fiberglass housing is extremely impact-resistant. Moreover, the oil sensor is embedded in a metal casing and is therefore unbreakable. In accordance with protection class IP65, it is protected against water jets and can be washed under running water
- Reliable: users are protected from the heat of the cooking oil thanks to the measuring instrument's ergonomic design
- Clear: %TPM shown on the large display, along with unambiguous signaling function of the display illumination in traffic light colors (red, yellow and green); Hold and Auto-Hold function for the reading display

Temperature - PTC:
- Measuring range: +40 to +200 °C
- Accuracy: ±1,5 °C
- Resolution: 0,1 °C

TPM - Capacitive:
Measuring range: 0,0 to 40,0 % TPM
Accuracy: ±2 % TPM (+40 to +190 °C) *typically, based on Testo in-house reference, at an ambient temperature of 25 °C
Resolution: 0,5 % TPM (+40 to +190 °C)

General technical data:
- Operating humidity: 0 to +90 %RH
- Weight: 255 g
- Reaction time: Approx. 30 s
- Dimensions: 170 x 50 x 300 mm ((LxWxH))
- Operating temperature: 0 to +50 °C
- Product-/housing material: TPE/PC + ABS/PC + ABS + 10% GF
- Protection class: IP65
- Product color: white
- Authorizations: CE 2014/30/EU
- Length probe shaft: 175 mm
- Length probe shaft tip: 35 mm
- Diameter probe shaft: 11 mm
- Diameter probe shaft tip: 10 mm
- Alarm features: Upper and lower TPM limit value freely adjustable, visual alarm via 3-colour display backlighting (green, orange, red), values and illumination flash in the display until the measurement is ended (Auto Hold)
- Battery type: 2 batteries type micro AAA 1.5 V (LR03)
- Battery life: at 20 °C approx. 25 h continuous operation (corresponds to approx. 500 measurements ), without display -lighting
- Display type: LCD (Liquid Crystal Display)
- Display size: 2 lines
- Display lighting: backlight
- Storage temperature: -20 to +70 °C
- Application temperature: +40 to +200 °C

Differential pressure measurement from 0 to 100 hPa
Flow measurement possible with a Pitot tube (available as an option)
Magnets on the rear allow hands-free work
10 units to choose from, display in pascals can be selected

Differential pressure measurement on gas hot water heaters or on filters of air conditioning systems, and also flow measurements in ventilation ducts using a Pitot tube: the compact testo 510 differential pressure measuring instrument, which comes with a silicone connection hose and other useful accessories, can help you maintain and install systems in the sanitary and HVAC sector.

Product Description:
With the testo 510 differential pressure measuring instrument, heating installers and air conditioning engineers will be well-equipped to carry out their work: the instrument measures differential pressure from 0 to 100 hPa and can help you check filters on air conditioning systems or measure static gas and gas flow pressure on heating systems, for example.

The following units can be selected on the testo 510 differential pressure measuring instrument:

Pa
hPa
mbar
mmH2O
mmHg
inH2O
inHg
psi
m/s
fpm

In addition, you can measure the flow in the ventilation duct with a Pitot tube that is available as an option – from 10 to 100 m/s.

Practical and precise: key advantages offered by the differential pressure measuring instrument
Precise: the differential pressure measurement has temperature and air density compensation for accurate readings
Uncomplicated: small, handy and easy to operate with just three buttons
Clever: you can work with your hands free thanks to magnets on the rear of the instrument. When there is poor visibility, such as in dark surroundings, the illuminated display makes it easier for you to work
Reliable: a belt pouch and plug-on protective cap mean the differential pressure measuring instrument can be safely stowed away and it is also well-secured during measurement thanks to a wrist strap
Ready to go: the silicone connection hose is included in the testo 510 set. So you can start your measurements straight away

Technical data:
Differential Pressure Piezoresistive:
Measuring range: 0 to 100 hPa
Accuracy: ±0.03 hPa (0 to 0.30 hPa)
±0.05 hPa (0.31 to 1.00 hPa)
±(0.1 hPa + 1.5 % of mv) (1.01 to 100 hPa)
Resolution: 0.01 hPa

General technical data:
Dimensions: 119 x 46 x 25 mm
Operating temperature: 0 to +50 °C
Protection class: IP40
Seceltable units: hPa, mbar, Pa, mmH2O, inH₂O, inHg, mmHg, psi, m/s, fpm
Maximal static pressure: 500 mbar
Measuring rate: 0.5 s
Battery type: 2 AAA micro batteries
Battery life: 50 h (average, without display illumination)
Storage temperature: -40 to +70 °C
Weight: 90 g (with batteries and protective cap)

Intuitive: clearly structured measurement menu for volume flow and parallel determination of air velocity, volume flow and air temperature in ventilation ducts
Convenient: integrated telescope that can be extended to 0.85 m, with scaling, makes it easy to carry out measurements
Reliable: absolute pressure compensation, internal data storage and USB port for data export
As multifaceted as your challenges themselves: the air velocity and IAQ measuring instrument can be expanded with a large portfolio of digital probes

Kit for carrying out measurements in ventilation ducts: the testo 440 air velocity and IAQ measuring instrument and the hot wire probe (Ø 9 mm) including temperature sensor are all safely stowed away in the case. So you can get down to work straight away!

Product Description:
Use this practical kit to measure air velocity velocity, volume flow and air temperature in ventilation ducts. The testo 440 multifunction measuring instrument and the hot wire probe feature an intelligent calibration concept, ease of use and maximum convenience for the adjustment of air-conditioning and ventilation systems.

testo 440 Hot Wire Kit in detail
testo 440 air velocity and IAQ measuring instrument:
No task is too challenging, no application too specialized: the testo 440 combines a compact hand-held measuring instrument with intuitive measurement menus and a wide selection of air velocity and IAQ probes (please order separately)
Clearly structured measurement menus: the volume flow is precisely calculated thanks to convenient input of the size and geometry of the duct cross-section. Timed and multi-point mean calculation, average volume flow, current reading and min./max. values are displayed
Other practical measurement menus, e.g. long-term measurement, volume flow measurement with a funnel, etc.
Easy storage and evaluation of measurement data. Measurement data memory for up to 7500 measurement protocols, which can be read via a USB port and further processed as a CSV file on the computer (e.g. with Excel)
Practical magnets for easy attachment of the measuring instrument to metal surfaces (e.g. ducts)
Automatic detection of probes, e.g. hot wire probe
Large, backlit colour display

Hot wire probe (Ø 9 mm) including temperature sensor:
Use the hot wire probe to measure air velocity, volume flow and air temperature in ventilation ducts
Accurate measurements from 0 to 30 m/s and -20 to +70 °C thanks to the robust sensor and automatic absolute pressure compensation
Telescope that can be extended to 0.85 m, with scaling, makes it easy to measure in ventilation ducts
Use the fixed cable to connect the hot wire probe to the testo 440 air velocity and IAQ measuring instrument
Intelligent calibration concept: the air velocity and IAQ measuring instrument remains in continuous use, since only the probe is sent in for calibration

Technical data:
Temperature NTC:
Measuring range: -40 to +150 °C
Accuracy: ±0.4 °C (-40 to -25.1 °C)
±0.3 °C (-25 to +74.9 °C)
±0.4 °C (+75 to +99.9 °C)
±0.5 % of mv (Remaining Range)
Resolution: 0.1 °C

Temperature TC Type K (NiCr-Ni):
Measuring range: -200 to +1370 °C
Accuracy: ±(0.3 °C + 0.3 °C)
Resolution: 0.1 °C

General technical data:
Dimensions: 154 x 65 x 32 mm
Operating temperature: -20 to +50 °C
Connectable probes: 1 x digital probe with cable or 1 x Temperature NTC TUC, 1 x digital Bluetooth probe or testo Smart Probe, 1 x Temperature TC Type K
Battery type: 3 AA mignon 1.5 V
Battery life: 12 h (typically vane measurement)
Data transfer: USB interface
Storage temperature: -20 to +50 °C
Weight: 250 g

Volume flow hood for larger swirl outlets for measuring volume flow, temperature and relative humidity
Impressively light with a weight of 2.9 kg
Precise measurement even at swirl outlets thanks to integrated volume flow straightener
Fast set-up, convenient operation and protocol creation on site using the App

Make sure you get the testo 420 volume flow hood for larger ceiling outlets and at the same time enjoy multiple maintenance benefits on HVAC systems. Because the flow hood with the removable measuring instrument is not only exceptionally light, it also guarantees accurate volume flow calculations at swirl outlets.

Product Description:
The testo 420 volume flow hood for larger air inlets and outlets enables fast and precise compliance with hygiene guidelines and requirements concerning room air quality. It provides reliable support with the calculation of the overall volume flow on HVAC systems, for instance in hospitals, office buildings or commercial buildings.

High measuring accuracy at swirl outlets thanks to volume flow straightener
Volume flow is frequently measured at swirl outlets. Air flows are often incorrectly measured due to the turbulent air at these outlets.
The testo 420 volume flow hood means you can significantly reduce these measurement errors. The integrated volume flow straightener calms the turbulence and converts it into a virtually uniform air flow. This enables accurate calculation of volume flow in the 80 to 3,500 m3/h range.

Exceptionally light volume flow hood with fast set-up
The volume flow hood with ergonomic handles and tiltable display has an exceptional weight of less than 2.9 kg. This means that frequent volume flow calculations in large rooms and measurements above head height can also be carried out reliably and comfortably. In the process, a large measuring button on the volume flow hood ensures easy recording of the readings.
The dimensions of the hood are 610 x 610 mm. We offer additional hoods as accessories for further ceiling outlets. The use of our optional tripod arm is a great help for air inlets and outlets which are located very high up. It can be extended up to 4 metres.
The volume flow hood is quick and easy to set up thanks to tension rods. The trolley which is included in the scope of delivery ensures safe transport.

Create protocols directly on site and mail them using the App connection
Take advantage of further practical functions and download our free App. Because the App connection enables mobile devices such as smartphones and tablets to be used as a secondary display and remote control via Bluetooth. This is particularly practical for using a tripod arm for high ceilings.
The App enables live measurement on HVAC systems using a start and stop function and the saving of measurement data in txt format. You can create the measurement protocol directly on site using the App. Measurement results, such as the overall volume flow and the air exchange rate, can be directly assigned to customer-specific protocol templates. You can then send your readings and protocols via the e-mail function. This means you save a considerable amount of time and increase efficiency.

Volume flow hood with removable measuring instrument performance overview
The volume flow hood for HVAC systems is equipped with a measuring instrument for displaying measurement data. The device can be tilted and removed for user-friendly reading of measuring values.
The testo 420 measuring instrument enables you to measure flow velocity, volume flow, absolute pressure, temperature and relative humidity. The automatic zeroing ensures higher accuracy for low pressures.
All measuring values are easy to read on the large display which has an illumination function. For analyses and documentation, measurement data can be saved and measurement protocols created directly on site using the App connection. Administration of the measurement data is very easy on the PC without any additional software via the plug & play function.
The testo 420 volume flow hood with its integrated measuring instrument was not just developed for volume flow measurement at larger ceiling outlets. The measuring instrument can also be taken off the hood and used for pressure, flow and volume flow measurements in the duct. This means you can save on the purchase of an additional measuring instrument.
You merely have to attach a Pitot tube and connection hoses (both optional) for measurements in ducts. Timed and multi-point mean calculation, as well as the combination of the two, together with simple input of the duct geometry provide you with support for measurements in ducts.

Technical data:
Temperature NTC:
Measuring range: -20 to +70 °C
Accuracy: ±0.5 °C (0 to +70 °C)
±0.8 °C (-20 to +0 °C)
Resolution: 0.1 °C
Reaction time: 45 s (t90)

Humidity Capacitive:
Measuring range: 0 to 100 %RH
Accuracy: ±1.8 %RH + 3 % of mv at +25 °C
(5 to 80 %RH)
Resolution: 0.1 %RH

Differential Pressure Piezoresistive:
Measuring range: -120 to +120 Pa
Accuracy: ±2 % of mv + 0.5 Pa at +22 °C, 1013 hPa
Resolution: 0.001 Pa
Reaction time: 1 s (t90)

Absolute Pressure:
Measuring range: 700 to 1100 hPa
Accuracy: ±3 hPa
Resolution: 0.1 hPa
Reaction time: 1 s

Volume flow:
Measuring range: 40 to 4000 m³/h
Accuracy: ±3 % of mv + 12 m³/h at +22 °C
1013 hPa (85 to 3500 m³/h)
Reaction time: 1 s (t90)
Resolution: 1 m³/h

General technical data:
Dimensions: 610 x 610 mm (Standard hood)
Operating temperature: -5 to +50 °C
EU-/EG-guidelines: EU-guideline 2014/30/EU
Battery type: Alkali manganese, mignon, type AA
Battery life: 40 h
Display size: 3.5"
Display function: Dot matrix
Display ligthing: with illumination
Interface: Micro-USB; Bluetooth® 4.0 wireless technology
Memory: 2 GB (internal)
Storage temperature: -20 to +60 °C
Weight: 2900 g

Highest image quality: IR resolution of 320 x 240 pixels, via integrated testo SuperResolution Technology 640 x 480 pixels
Precise measurement: thermal sensitivity of 0.06°C
Smart and wireless: use your mobile device with the free testo Thermography App and wirelessly transmit readings from the testo 770-3 clamp meter and the testo 605i humidity measuring instrument (both available separately)
Innovative functions, such as testo ScaleAssist and testo ɛ-Assist for comparable, error-free thermal images

The testo 872 thermal imager gives you the best possible support for your work in professional industrial and building thermography. Take thermal images quickly, reliably and smartly with the highest image quality, very good thermal sensitivity and innovative functions. The case supplied with the thermal imager means it can be conveniently transported, so it is always there for you when needed.

Product Description:
The testo 872 thermal imager is ideally suited for professional industrial and building thermography at the same time it ensures your work is both quick and easy. It is versatile to use, for example in industrial and mechanical maintenance or for detecting structural defects. You can generate error-free and objectively comparable infrared images using its handy functions. The IFOV warner, testo ɛ-Assist and testo ScaleAssist mean you can avoid measurement errors and not only effortlessly achieve optimum setting of emissivity (ɛ) and reflected temperature (RTC) for building thermography, but also of thermal image scale.

The testo 872 thermal imager– smart and networked
The testo 872 thermal imager guarantees wireless communication with mobile terminal devices via WLAN. The testo Thermography App for iOS and Android offers you the possibility of writing and sending reports on site, as well as saving them online, and of using your smartphone or tablet as a second display or for remote control.
The testo 872 delivers even more informative thermal images in combination with the compatible 770-3 clamp meter and testo 605i thermohygrometer. Both are available separately – simply order them straight away along with your testo 872. The thermal imager wirelessly integrates the measurement results of these measuring instruments via Bluetooth. The additional output, current and voltage values of the testo 770-3 clamp meter enable better interpretation of measured temperatures. Measure the air temperature and humidity with the testo 605i humidity measuring instrument and easily detect locations at risk of developing mould using the special humidity palette in the thermal imager via the traffic light principle.

Areas of application of the testo 872 thermal imager
Detect locations at risk of developing mould, pinpoint thermal bridges, discover structural defects or identify overheated connections. The testo 872 thermal imager is ideal for applications in daily maintenance and installation work in trade and industry. Quick, simple and reliable for maintenance and detection of defects.

Technical highlights of the testo 872 thermal imager
The testo 872 thermal imager is characterized by its easy handling and its outstanding image quality. Its technical features are impressive:

Highest image quality thanks to high resolution: 76,800 temperature measuring points for precise thermography. Infrared resolution of 320 x 240 pixels – extendible to 640 x 480 pixels via integrated SuperResolution Technology
Detecting temperature differences from as little as 0.06°C
testo Thermography App to use mobile terminal devices as a second display and for remote control or to write and send reports, along with saving them online
Wireless communication thanks to Bluetooth – this means you can also wirelessly integrate the readings of the compatible testo 770-3 clamp meter and testo 605i thermohygrometer
Built-in digital camera and laser marker generate a real image in parallel to the thermal image
Critical temperature conditions are directly displayed via automatic hot-cold spot recognition
The testo ScaleAssist automatically ensures optimum setting of the thermal image scale, which means you generate objectively comparable and error-free thermal images, for example of the thermal insulation behaviour of buildings
The testo ɛ-Assist ensures the correct measurement result by automatically determining and setting the emissivity and reflected temperature
The IFOV warner means the distance from the measurement object / measurement spot size is determined and the measurement spot is shown on the thermal image – you therefore avoid measurement errors because the camera shows you exactly what you can measure
Pro software for image evaluation on the PC
You can choose to save thermal images as JPEGs

Technical data:
Infrared image output:
Focus: Fixed focus
Infrared resolution: 320 x 240 pixel
Image refresh rate: 9 Hz
SuperResolution (IFOV): 1.3 mrad
SuperResolution (Pixel): 640 x 480 pixels
Geometric resolution (IFOV): 2.3 mrad
Minimum focus distance: <0.5 m
Field of view: 42° x 30°
Thermal sensitivity: 60 mK
Spectral range: 7.5 to 14 µm

Image output visual:
Minimum focus distance: 0.5 m
Image size: at least 3.1 MP

Image presentation:
Display option: IR image / real image
Colours: 10 (iron, rainbow, rainbow HC, cold-hot, blue-red, grey, inverted grey, sepia, Testo, iron HT)
Display type: 8.9 cm (3.5") TFT, QVGA (320 x 240 pixels)
Digital zoom: 2x; 4x

Measurement:
Reflected temperature: manual
testo ε-Assist: Included
Measuring range: -30 to +100°C; 0 to +650°C
Accuracy: ±2 °C, ±2 % of m.v.
Emissivity: 0.01 to 1

Measuring function:
Solar mode – manual: Input of solar radiation value
Analysis function: Mean point measurement, hot/cold-spot recognition, Delta T, area measurement (min-max on area)
Humidity measurement with humidity measuring instrument: Automatic measurement value transfer of thermohygrometer testo 605i via Bluetooth (instrument must be ordered separately); Wireless permit in EU, EFTA, USA, Canada, Australia, Turkey
testo ScaleAssist: Included
Humidity mode manual: Included
IFOV warner: Included
Electrical mode manual: Input of current, voltage or power
Electrical measurement with clamp meter: Automatic measurement value transfer of clamp meter testo 770-3 via Bluetooth (instrument must be ordedered separately); Wireless permit in EU, EFTA, USA, Canada, Australia, Turkey

Imager equipment:
Digital camera: Included
Full screen mode: Included
JPEG storage: Included
Video streaming: via wireless LAN with testo Thermography App
Laser: Laser marker
Standard lens: 42° x 30°
Interface: USB 2.0 Micro B
WLAN Connectivity: Communication with the testo Thermography App wireless module BT/WLAN (EU, EFTA, USA, AUS, CDN, TR)
Bluetooth: Measurement value transfer from thermohygrometer testo 605i, clamp meter testo 770-3 (optional); Wireless permit in EU, EFTA, USA, Canada, Australia, Turkey

Imager storage:
File format image: .bmt; .jpg; export option in .bmp; .jpg; .png; .csv; .xls
Storage device: Internal Memory (2.8 GB)

Power supply:
Battery type: Fast-charging, Li-ion battery can be changed on-site
Operating time: 4 h
Charging options: In instrument / charger (optional)
Mains operation: yes

Ambient Condition:
Housing protection class: IP54
Vibration: 2G
Air humidity: 20 to 80 %RH non-condensing
Storage temperature: -30 to +60 °C
Operating temperature: -15 to +50 °C

Physical specification:
Housing: PC ABS
Weight: 510 g
Dimensions: 219 x 96 x 95 mm

PC software:
System requirements: Windows 10; Windows 8; Windows 7

Standards, tests, warranty:
EU-/EG-guidelines: RED: 2014/53/EU; EMC: 2014/30/EU

Measurement of gas flow and static pressure
Measurement menu for pressure drop test including alerts
Simple configuration and determination of volume flow with Pitot tube
Magnetic holder for easy attachment

Handy and intelligent: the compact testo 510i differential pressure measuring instrument featuring professional measuring technology and smartphone operation for measuring differential pressure, air flow velocity and volume flow. Readings can be viewed conveniently on your smartphone/tablet via the testo Smart Probes App and emailed directly.

Product Description:
The testo 510i differential pressure measuring instrument, used in conjunction with a smartphone or tablet, is suitable for quick and easy measurement of gas flow pressure and static pressure, as well as pressure drops on fans and filters. You can also use the compact testo 510i for flow measurement and volume flow measurement.

Turn your smartphone/tablet into a measuring instrument
Use your smartphone or tablet as a display: installed on a terminal device, the testo Smart Probes App allows you to view testo 510i readings conveniently, configure volume flow measurements quickly and easily, and carry out reliable timed and multi-point mean calculation. The App also includes a measurement menu for the pressure drop test. All measurement data can be displayed as a chart or in table form. The measurement data log can be emailed directly as a PDF or Excel file.

System requirements:
iOS 8.3 or later
Android 4.3 or later
Bluetooth 4.0

Technical data:
Differential pressure (internal sensor) Piezoresistive:
Measuring range: -150 to +150 hPa
Accuracy: ±0.05 hPa (0 to +1 hPa)
±(0.2 hPa + 1.5 % of mv) (+1 to +150 hPa)
Resolution: 0.01 hPa

General technical data:
Dimensions: 148 x 36 x 23 mm
Operating temperature: -20 to +50 °C
System requirements: requires iOS 8.3 or newer; requires Android 4.3 or newer; requires mobile end device with Bluetooth 4.0
Battery type: 3 AAA micro batteries
Battery life: 150 h
Storage temperature: 20 to +60 °C

Measures relative humidity and air temperature
Calculates the dew point
Ideal for measurements in ventilation ducts and in rooms
Measuring values easy to read off thanks to a pivoting display

The testo 605-H1 thermohygrometer enables reliable measurement of humidity and air temperature and calculation of the dew point. It has a permanently mounted probe shaft which means it is excellent when it comes to carrying out check measurements in ventilation ducts.

Product Description:
If you are looking for a compact, user-friendly thermohygrometer, the testo 605-H1 is the ideal choice. It measures relative humidity and air temperature and also calculates the dew point in the -20 to +50 °C td range. The built-in Testo humidity sensor ensures reliable measurement results with long-term stability.

The thermohygrometer is suitable for check measurements in production, storage, office and server areas. The testo 605-H1 is particularly practical for measurements in ventilation ducts, because it has a permanently mounted probe shaft (length: 125 mm). The bracket which is also supplied enables you to position and fix the probe shaft in the desired location in the ventilation duct. This means you can carry out your measurements without having to hold the thermohygrometer while doing so.

The design of the testo 605-H1 temperature and humidity measuring instrument has been well thought through, right down to the details: the display can be pivoted into different positions, enabling the measuring values to be read off easily. When you are not using the testo 605-H1, the rotating protective cap at the end of the probe shaft protects the sensor from mechanical stress.

Technical data:
Temperature NTC:
Measuring range: 0 to +50 °C
-20 to +50 °Ctd
Accuracy: ±0.5 °C
Resolution: 0.1 °C
Humidity Capacitive
Measuring range: 5 to 95 %RH
Accuracy: ±3 %RH
Resolution: 0.1 %RH

General technical data:
Operating temperature: 0 to +50 °C
Battery type: 3 AAA micro batteries
Battery life: Approx. 1000 h
Storage temperature: -20 to +70 °C
Weight: 75 g (with batteries, without packaging)

With this kit, you’ll be ready to start your measurements in the commissioning, servicing and maintenance of refrigeration and air conditioning systems and heat pumps straight away: You will get the testo 550s smart digital manifold with Bluetooth and 2-way valve block, two fixed cable clamp temperature probes (NTC) and a robust transport case. Additional Bluetooth probes, e.g. for wireless measurements of temperature and vacuum, are available separately.

- All results at a glance thanks to the large graphic display
- Exceptionally compact and reliable thanks to the easy-to-handle, robust housing with IP 54 protection class
- Easy, wireless, flexible measurements and documentation: Temperature and vacuum measurements via automatic Bluetooth® connection, testo Smart App for documentation and lots more

Applications: Refrigeration systems, air conditioning systems, heat pumps
- Determination of high and low pressure, automatic determination of condensation and evaporation temperature and calculation of superheating/subcooling. All results can be read simultaneously on one screen
- Tightness test: Recording and analysis of the pressure curve
- Automatic calculation of the target superheat (in conjunction with the appropriate measuring instrument, e.g. Testo Smart Probe)
- Measure vacuum: Graphic progression display of the measurement with indication of the start and differential value
- Evacuation: Graphic progression display of the measurement with indication of the start and differential value (in conjunction with the appropriate Testo Smart Probe, e.g. testo 552i vacuum probe)

Technical Data: testo 550s - Smart digital manifold with Bluetooth and 2-way valve block
Temperature:
Measuring range: -50 to +150 °C
Accuracy: ±0,5 °C
Resolution: 0,1 °C
Probe connection: 2 x Plug-in (NTC)
Pressure measurement:
Measuring range: -1 to 60 bar
Accuracy: ±0,5 % fs
Resolution: 0,01 bar
Probe connection: 3 x 7/16" – UNF
Overload rel. (high pressure): 65 bar
General technical data:
Weight: 826 g
Dimensions: 210 x 121 x 60 mm (LxWxH)
Operating temperature: -20 to +50 °C
Protection class: IP54
Product colour: Black
Auto-off: 10 min (when not connected via Bluetooth)
Battery type: 4 x type AA batteries
Battery life: 250 h with no illumination, no Bluetooth®h; 100 h with illumination and Bluetooth®
Radio range: 150 m
Refrigerants in instrument: R407H; R23; R290; R1234yf; R442A; R134a; R123; R452B; R438A; R421A; R453a; R401B; R1233zd; R410A; R407A; R407C; R452A; R401A; R422C; R427A; R422B; R424A; R125; R414B; R404A; R408A; R448A; R422D; R12; R114; R421B; R449A; R409A; R420A; R444B; R32; R454A; R124; R402A; R450A; R407F; R416A; R13; R437A; R1234ze; R454B; R402B; R22; R434A; R454C; R455A; R458A; R500; R502; R503; R507; R513A; R600a; R718 (H₂O); R744 (CO₂)
System requirements: requires iOS 11.0 or newer; requires Android 6.0 or newer; requires mobile end device with Bluetooth 4.0
Refrigerants update via App: R11; FX80; I12A; R1150; R1270; R13B1; R14; R142B; R152A; R161; R170; R227; R236fa; R245fa; R401C; R406A; R407B; R407D; R41; R411A; R412A; R413A; R417A; R417B; R417C; R422A; R426A; R508A; R508B; R600; RIS89; SP22
Storage temperature: -20 to +60 °C

Technical Data: Clamp temperature probe kit (fixed cable, NTC) - For measurements on pipes (Ø 6-35 mm)
Temperature - NTC:
Measuring range: -40 to +125 °C
Accuracy: ±1 °C (-20 to +85 °C)
General technical data:
Weight: 81 g
Dimensions: 120 x 77 x 32 mm
Product colour: Black

Can detect all the most common cooling agents: CFCs, HFCs, FCs
Highly sensitive – detects even the smallest leaks
Easy-to-use one-button operation
Complies with specifications for F gases regulations, SAE Code J1627 and DIN EN 14624:2012 standard

Leak detection in refrigeration engineering? Sure thing! The testo 316-3 refrigerant leak detector can detect all the most common cooling agents and locate even the smallest leaks. Complies with all important regulations and norms. One piece of kit you as a refrigerant technician won’t want to be without.

Product Description:
The testo 316-3 refrigerant leak detector is one piece of kit that you as a refrigerant technician just won’t want to be without. The handheld leak detector can detect all the most common cooling agents. And the smallest leaks. Comes with an automatic zero setting that also enables you to locate leaks in contaminated rooms.

testo 316-3 leak detector – benefits at a glance
Can detect all common cooling agents: CFCs, HFCs, FCs
Highly sensitive ( < 4 g/a 1g/a according to DIN EN14624:2012 standard) can detect even the smallest leaks
Ready for use – there’s no need to select cooling agent characteristics first
Automatic zero setting – can detect leaks in rooms that are already contaminated
Visual and audible alarm which are activated when a leak is detected
Quick and easy sensor change
Complies with specifications for F gases regulations, SAE norm J1627 and DIN EN 14624:2012 standard

General technical data:
Operating humidity: 20 to 80 %RH
Operating temperature: -18 to +50 °C
Detectable: R22; R134a; R404A; R410A; R507; R438A; and all CFCs, HFCs, and HCFCs
Sensitivity: 4 g/a (0.15 oz/a)
Life-time sensor: Approx. 80 to 100 h (corresponds to approx. 1 year)
Standards: EN 14624:2012; SAE J1627
EU-/EG-guidelines: 2004/108/EG
Battery type: 2 x D
Battery life: 16h permanent operation
Storage temperature: 0 to +50 °C
Weight: 500 g (incl. batteries)

Automated temperature monitoring with integrated probe
WiFI data logger system with easy installation and operation
Call up temperature data at any time via Smartphone, tablet or PC
Limit value violation alarms by e-mail or (optionally) SMS

The WiFi data logger testo Saveris 2-T1 allows you to monitor the temperatures in refrigerated, workor storerooms. The temperature values measured with the integrated probe are reliably recorded over long periods, and transmitted directly to the Testo Cloud (online data store) via your wireless LAN. You can access these readings at any time, anywhere, using your internet-enabled smartphone, tablet or PC.

Product Description:
The testo Saveris 2 WiFi data logger system is the easy, versatile and reliable solution for the measurement and monitoring of temperature values in your storage, refrigerated and work rooms. Installing the system is child's play and can be carried out either via a browser or with the testo Saveris 2 App.

Temperature monitoring with testo Saveris 2
The temperature monitoring system consists of at least one WiFi data logger and a Cloud access (online data store). As a component of this data logger system, the testo Saveris 2-T1 temperature data logger with integrated NTC temperature probe stores all measured temperature values and transmits them directly via your WLAN to the Testo Cloud. You can use the alarm function to receive immediate warnings by e-mail or SMS (optional) when limit values are violated.

The Testo Cloud packages: Basic (free) and Advanced
The Testo Cloud is the core operating element for setting up your testo Saveris 2 system. Here you can configure your WiFi data loggers, set limit value alarms and analyze your measurement data. You can access all measuring values and analysis functions anywhere and at any time with an internet-capable smartphone, tablet or PC. You must first register at www.saveris.net to have access to the Testo Cloud.

Depending on the range of functions you require, you have a choice between the free Basic and the more extensive Advanced functionality for use of the Testo Cloud:

Basic (free): Advanced:
Measuring cycle: 15 min. ... 24 h 1 min. ... 24 h
Communication cycle: 15 min. ... 24 h 1 min. ... 24 h
Data storage: Max. 3 months Max. 2 years
Reports: Manual (.pdf/.csv) Manual (.pdf/.csv)
Automatic (.pdf/.csv)
Number of users per account: 1 10
Number of WiFi data loggers per account: Unlimited Unlimited
Alarm options: Upper/lower alarm limits • Upper/lower alarm limits
• Alarm delay
• Time control of alarms
System notifications: • Notification of low battery • Notification of low battery
• Radio link interrupted • Radio link interrupted
• Power supply interrupted • Power supply interrupted
E-mail alarm: Yes Yes
SMS alarm: No • Including 25 SMS per logger and year • Option of purchasing additional SMS packages
Measurement data export (API interface): Yes Yes

If you opt for the advantages of the Advanced package, this also gives you a choice between licence packages which differ in terms of their validity period (12-month licence with order no. 0526 0735, 24-month licence with order no. 0526 0732, 36-month licence with order no. 0526 0733).

WiFi data logger: advantages and functions
Current measuring values, limit value violations and the remaining battery life can be seen in the data logger's display. The standard batteries (AA) have a lifetime of 12 months and can be replaced at any time by users themselves. The internal data memory of the WiFi data logger is 10,000 readings and the housing has IP65 protection. The testo Saveris 2-T1 is tested by TÜV Süd according to EN 12830.

Technical data:
Temperature NTC:
Measuring range: -30 to +50 °C
Accuracy: ±0.5
Resolution: 0.1 °C

General technical data:
Dimensions: 95 x 75 x 30.5 mm
Operating temperature: -30 to +50 °C
Protection class: IP65
Communication rate: Dependent on Cloud licence; Basic: 15 min … 24 h / Advanced: 1 min … 24 h
WLAN Connectivity: Signal transmission: wireless; frequency band: 2.4 GHz; supported wireless LAN standards: IEEE 802.11 b/g/n and IEEE 802.1X; Possible encryption methods: without encryption, WEP, WPA, WPA2, WPA2 Enterprise The data loggers communicate via the standard protocol MQTT and are SNTP time synchronization-capable.
Measuring rate: Dependent on Cloud licence; Basic: 15 min … 24 h / Advanced: 1 min … 24 h
Standards: EN 12830
Power supply: 4 x AA AlMn batteries; mains unit optional; for temperatures below -10 °C please use Energizer batteries 0515 0572
Memory: 10,000 measurement values / channel
Battery life: 12 months (typical value, depending on the wireless LAN infrastructure) at +25 °C, 15-minute measuring cycle and standard communication cycle at -30 °C, 15-minute measuring cycle and standard communication cycle with Energizer batteries 0515 0572
Storage temperature: -40 to +70 °C (without batteries)
Weight: 240 g

Vane anemometer with permanently installed 40 mm vane
Measurement of air velocity and air temperature
Calculates wind chill and the Beaufort wind force
Practical: with single-point averaging, max/min and Hold function

The testo 410-1 vane anemometer measures air velocity and air temperature. Use it to carry out quick spot measurements at ventilation grilles (air outlets). The anemometer is also ideal for use outdoors. It displays the units m/s, km/h, fpm, mph and kts, and also calculates wind chill and the Beaufort wind force.

Product Description:
The testo 410-1 vane anemometer is impressive thanks to its practical pocket size and is ideal for fast check measurements. With a measuring range of 0.4 to 20 m/s, the anemometer can even be used for low flow speeds.
The anemometer has a permanently mounted vane with a diameter of 40 mm. You can therefore use it for the integral measurement of air velocity at ventilation grilles (air outlets).
The anemometer is practical for outdoor operation: as well as air velocity and air temperature, the testo 410-1 also calculates the Beaufort wind force and the wind chill temperature, which is the temperature perceived by a person due to wind-related cooling.

The vane anemometer with practical functions
The testo 410-1 includes a plug-on protective cap, as well as a wrist strap for secure measurement, and enables you to take advantage of the following functions:
Single-point averaging: provides information on the average air velocity, e.g. at air outlets
Hold function: is used to record the current values relating to air velocity and air temperature and compare them with each other
Max/min values: get the minimum or maximum values since the anemometer was last switched on or reset, at the touch of a button
Illuminated display: read off your readings even in dark environments
Selectable units: for air velocity and temperature: m/s, km/h, fpm, mph, kts, Beaufort, °C, °F and wind chill

Technical data:
Temperature NTC:
Measuring range: -10 to +50 °C
Accuracy: ±0.5 °C
Resolution: 0.1 °C
Measuring rate: 0.5 s

Velocity Vane:
Measuring range: 0.4 to 20 m/s
Accuracy: ±(0.2 m/s + 2 % of mv)
Resolution: 0.1 m/s

General technical data:
Dimensions: 133 x 46 x 25 mm (incl. protective cap)
Operating temperature: -10 to +50 °C
Protection class: IP10
Battery type: 2 AAA micro batteries
Battery life: 100 h (average, without display illumination)
Storage temperature: -20 to +70 °C
Weight: 110 g (with protective cap and batteries)

Easy, reliable work thanks to automatic measurement parameter detection
Comfortable, one-handed operation without any dial
Voltage range up to 1,000 V
Additional functions, such as true root mean square measurement TRMS, low-pass filter and temperature adapter

The testo 760-3 is the most high-performance model in Testo's digital multimeter family. In addition to automatic detection of measurement parameters, it is characterized by a voltage measuring range of up to 1,000 V along with large measuring ranges for frequency and capacitance. The digital multimeter is therefore also suitable for industrial applications.

Product Description:
The testo 760-3 digital multimeter is the multitasker for all important professionals in the electricity sector. It enables you to carry out both simple and demanding electrical measuring tasks more reliably than ever before. The testo 760-3 automatically detects the appropriate measurement parameter via the socket assignment and so prevents dangerous incorrect settings.

A voltage range of up to 1,000 V, a frequency range of up to 30 MHz and capacitance of up to 60,000 µF mean the testo 760-3 multimeter can also be used for industrial applications, such as troubleshooting in large electrical systems. And the integrated low-pass filter achieves more accurate measurement results on frequency converter controlled motors.

Temperatures can also be measured with this multimeter in addition to electrical parameters. You will need the clip-on type K thermocouple adapter and a temperature probe (both items can be ordered separately).

Technical data:
Temperature TC Type K (NiCr-Ni):
Measuring range: -20 to +500 °C
Accuracy: ±1 °C (0 to +100 °C)
Resolution: 0.2 °C

DC voltage:
Measuring Range: 0.1 to 1000 V
Resolution: 0.1 mV
Accuracy: ± (0.8 % of mv + 3 Digit)

AC voltage:
Measuring Range: 0.1 mV to 1000 V
Resolution: 0.1 mV
Accuracy: ± (1.0 % of mv + 3 Digit)

DC current:
Measuring Range: 0.1 μA to 10 A
Resolution: 0.1 μA
Accuracy: ± (1.5 % of mv + 5 Digit)

AC current:
Measuring Range: 0.1 μA to 10 A
Resolution: 0.1 μA
Accuracy: ± (1.5 % of mv to 5 Digit)

Resistance:
Measuring Range: 0.1 Ohm to 60.00 MOhm
Resolution: 0.1 Ohm
Accuracy: ± (1.5 % of mv + 3 Digit)

Capacitance:
Resolution: 0.01 nF
Measuring Range: 2 nF to 30.00 mF
Accuracy: ± (1.5 % of mv + 5 Digit)

Frequency:
Resolution: 0.001 Hz
Measuring Range: 0.001 Hz to 600.0 kHz
Accuracy: ± (0.1 % of mv + 1 Digit)

General technical data:
Dimensions: 167 x 85 x 45 mm
Operating temperature: -10 to +50 °C
Protection class: IP64
Storage temperature: -15 to +60 °C
Weight: 340 g
Overvoltage Category: CAT IV 600V; CAT III 1000V
Authorizations: CE; CSA

Instrument Measurement Functions:
Diode test: yes
Continuity testing: yes
Current probe measurement with adapter: yes
Display ligthing: yes
Hold: yes
MinMax: yes
Temperature measurement with adapter: yes
True RMS: yes
Low-pass filter: yes
Duty cycle measurement: yes
Display (counts): 6,000
μA current measuring range: yes
Autom. measurement parameter detection: yes