The MTD70T True RMS 600A AC Clamp Meter is a useful tool that allows you to safely test for electrical problems, motor’s condition and current on appliances. Equipped to test any electrical circuit without disconnecting any wires. Handy features include a backlit LCD display and flashlight for working in dimly lit areas. The NCV Non-Contact Voltage detector is useful for a quick check to see if voltage is present on circuit under test. Measures 0.001A to 600A AC, DC and AC Volt, Resistance, Continuity buzzer and Diode Test. This 600A AC Clamp Meter ha a 28mm Jaw opening and accessories include carrying case and test leads.

ADDITIONAL INFORMATION:
DC Voltage: 200mV – 2V – 20V – 200V – 600V
DC Voltage accuracy: ±(0.5% + 5d)
AC Voltage: 200mV – 2V – 20V – 200V – 600V
AC voltage accuracy: ±(1.0% +5)
AC Current: 2A – 20A – 200A – 600A
AC Current accuracy: ±(2.0% +5)
Resistance: 200Ω – 2kΩ – 20kΩ – 200kΩ – 2MΩ – 20MΩ
Resistance accuracy: ±(0.8% + 1d)
Continuity: Buzzer sounds at approx. 50Ω
Diode Test: Test current 0.8mA, open circuit voltage 2.2V
Power source: 2 x 1.5V AAA batteries
Dimensions: 185 x 65 x 37mm
Weight: 280g

The MTD10 DIY Digital Multi meter is a completely portable 3 ½ digital multi meter designed for use by a student and hobbyist. Equipped with 8 functions and 21 ranges, each test position is quickly and easily selected with a simple turn of the single selector switch.

ADDITIONAL INFORMATION:
Data Hold: Yes
Power source: 9V Alkaline / Carbon-zine
Over-range indication: Yes
Diode Test: Yes
Digital Display: 3 ½ Digital LCD 1999 max
DC Voltage: 200mV – 2V – 20V – 200V – 500V
DC Current: 200µA-2mA-20mA-200mA-10A
Built-in buzzer: Yes
Continuity: Yes
Battery test: 1.5V
Battery Life: 100 Hrs carbon-zine
Back Light: Yes
AC Voltage: 200V-500V
Resistance: 200Ω-2kΩ-20kΩ-200kΩ-2MΩ
Fuse: F 200mA/250V
Weight: 195g
Dimensions: 144 (h) x 71(w) x 32(d) mm

The MT310 Earth Leakage Tester is a compact, lightweight and easy to use socket, polarity and earth leakage tester that tests 3-wire 216V AC – 264V AC circuits and Earth Leakage Circuit Breakers. A unique feature is the AC Voltage indication on the LCD display. It also features a milli-amp (mA) trip setting with a separate test button. The unit can be set from 10mA, used for testing saturation and to eliminate nuisance tripping, to 35mA. The bright neon indication assists the user in confirming the wiring status of the circuit under test. Simply plug the MT310 into a wall socket and the results are clearly displayed. For additional safety, the MT310 is rated at CAT IV 300V and CAT III 600V.

MT800 is a cost effective analogue multimeter for hobbyist and home owner for shop, office, home, boats and cars.

ADDITIONAL INFORMATION:
Weight: 95g
Battery: 1 x AA
Dimensions: 100mm(H) x 64mm(W) x 33mm (D)
AC Voltage: 10V – 50V – 250V – 500V
DC Voltage: 2.5V – 10V – 50V – 250V – 500V

The MTD73A True RMS 800A AC Clamp Meter is a useful tool that allows you to safely test for electrical problems, motor’s condition and current on appliances. Equipped to test any electrical circuit without disconnecting any wires. Handy function includes a backlit LCD display and Flashlight for working in dimly lit areas. The NCV Non-Contact Voltage detector is useful for a quick check to see it voltage is present on circuit under test. Measures 0.001A to 800A AC, 0.1mV to 600V AC/DC, Temperature, Capacitance, Frequency, Resistance, Continuity buzzer and Diode Test. This 800A AC Clamp Meter has a 28mm Jaw opening and accessories include test leads, temperature air probe and carrying case.

ADDITIONAL INFORMATION:
DC Voltage: 400mV – 4V – 40V – 400V – 600V
DC Voltage accuracy: ±(0.5% + 5d)
AC Voltage: 4V – 40V – 400V – 600V
AC voltage accuracy: ±(1.0% +5)
AC Current: 4A – 40A – 400A – 800A
AC Current accuracy: ±(3.0% +5)
Resistance: 400Ω – 4kΩ – 40kΩ – 400kΩ – 4MΩ – 40MΩ
Resistance accuracy: ±(0.8% + 3d)
Capacitance: 4nF – 40nF – 400nF – 4uF – 40uF – 400uF – 4mF – 40mF
Capacitance accuracy: ±(2.5% + 5d)
Frequency: 10Hz – 100Hz – 1kHz – 10kHz – 100kHz – 1MHz – 10MHz
Frequency accuracy: ±(0.5% + 4d)
Temperature: -40 to 1000°C
Temperature accuracy: ±(1.0% + 5°C)
Continuity: Buzzer sounds at approx. 50Ω
Diode Test: Test current 0.8mA, open circuit voltage 2.2V
Power source: 2 x 1.5V AAA batteries
Dimensions: 185 x 65 x 37mm
Weight: 180g

Kaufmann - 5 x 25mm CR90 Tape Measure

Steel Tape Measure
10Meter x 25mm Steel Blade Measuring Tape

The Spirit Level Box 600mm x 1.4mm with 2 Vials and 0.5mm Accuracy is a high-quality, durable level tool designed for precision alignment and leveling in various construction and DIY tasks. The 600mm length provides ample size for measuring larger surfaces, while the 1.4mm thickness ensures strength and stability. Equipped with two vials (bubbles), this level allows you to measure both horizontal and vertical surfaces. The level offers an accuracy of 0.5mm, ensuring precise measurements. Made from aluminum, it is lightweight yet strong, making it easy to handle and suitable for a wide range of applications, from framing to tiling and cabinetry.

Kaufmann - 8 x 25mm CR90 Tape Measure

The MTD84 is a compact True RMS auto ranging multimeter with a 6000 count LCD backlit display. The Smart mode, “AUTO”, is a
function that automatically identifies DC voltage, AC voltage, Resistance and continuity and automatically displays the measurements.
There is a built-in Non-Contact voltage detector, by pressing the NCV button continuously the LCD displays “EF” and will display “—-“
when voltage is detected and the buzzer sounds. This meter meets the International Standard IEC 61010-1 CAT III 600V, and is ideally
suited for everyday use by electricians, electronic technicians, students and DIY users The meter has a built-in tilt stand for hands free
convenience as well as low battery indication and auto power off.


ADDITIONAL INFORMATION:
DC Voltage: 60.00mV – 1000V
AC Voltage:60.00mV – 750V
DC Current: 60.00mA – 10.00A
AC Current: 60.00mA – 10.00A
Duty Cycle: 1% – 99%
Resistance: 600.0Ω – 60.00MΩ
Frequency: 99.99Hz – 10MHz
Capacitance: 9.999nF – 9.999mF
True RMS Measurements: Yes
Continuity: Yes
Built-in Buzzer: Yes
Diode Test: Yes
Ac Bandwidth: 50Hz to 400Hz
Digital Display: LCD 6000 count
Overrange Indication: Yes
Data Hold: Yes
Back Light: Yes
Enclosure: ABS/PVC
Batteries: 2 x AAA
Weight: 138g
Dimensions: 130 x 65 x 32mm
Safety Specs: CAT III 600V

Kaufmann Hardware All Steel Tape Measure - 25mm x 5M

The MTD80 is a compact True RMS auto ranging multimeter with a 4000 count LCD backlit display. The meter always operates in the
Smart mode “AUTO” function that automatically identifies DC voltage, AC voltage, Resistance and continuity buzzer and automatically
displays the measurements. There is a built-in Non-Contact voltage detector, by pressing the NCV button continuously the LCD
displays “EF” and will display “—-“ when voltage is detected and the buzzer sounds. This meter meets the International Standard IEC
61010-1 CAT II 600V/ CAT III 300V, and is ideally suited for users who want a simple meter to automatically read the measurement of the
circuit or system under test. Ideal for everyday use by electricians, electronic technicians, alarm installers, students and DIY users The
meter has a rubber holster with a built-in tilt stand for hands free convenience as well as low battery indication and auto power off.

ADDITIONAL INFORMATION:
DC Voltage: 4.000V – 600V
AC Voltage: 4.000V – 600V
DC Current; 999.9mA – 10A
AC Current: 999.9mA – 10A
Resistance: 4.000kΩ – 40.00MΩ
True RMS Measurements: Yes
Continuity: Yes
Built-in Buzzer: Yes
AC Bandwidth: 40Hz to 1kHz
Digital Display: LCD 4000 count
Non-Contact Voltage (NCV): Yes
Overrange indication: Yes
Data Hold: Yes
Back Light: Yes
Enclosure: ABS
Batteries: 2 x AAA
Weight: 140g
Dimensions: 120 x 62 x 30mm
Safety Specs: CAT II 600V

Kaufmann Combination Square with Center & Angle

A Bevel Gauge 249x27x24mm is a precision tool used to measure and set angles in various applications such as woodworking, metalworking, and construction. The gauge typically features a 249mm length, a 27mm width, and a 24mm height, offering a compact and sturdy design for easy handling. It allows users to measure, transfer, and adjust angles accurately, making it ideal for tasks like cutting, shaping, or aligning materials to specific angles. The bevel gauge ensures precision when working with complex angles and is an essential tool for achieving consistent, accurate results.

The MT963 provides moisture measurements in wood and other building materials. The meter clarifies wood into four grades based on material type and density which includes wood, plywood, paper and other wooden materials. There is the option of three grades for building materials such as cement mortar, lime mortar and brick. The backlit LCD displays the moisture as a percentage in the wood or other materials being tested. The miniature and pocket size design with high precision makes it a perfect choice for measuring moisture.

The MT870 is a 600V AC/DC True RMS Multimeter supplied with a rubber holster designed to be robust and drop proof. The meter has a 2000 count large easy to read display and is an auto ranging multimeter with the option of manual override. Measuring functions include AC and DC voltage, AC and DC current, resistance, continuity buzzer and diode test range. The AC and DC micro Amp ranges is suited for electronic measurements. The MT870 also offers the added convenience of 1.5V and 9V battery tests and a tilt stand. This meter meets the International Standard IEC 61010-1 CAT III 300V. The meter offers excellent performance and is ideal as a handy multimeter for electronic technicians and electricians, alarm installers and students studying electronics.

ADDITIONAL INFORMATION:

• DC Voltage: 600V
• DC Voltage resolution: 0.1mV
• DC Voltage accuracy” ±(0.5% +2)
• AC Voltage: 600V
• AC Voltage resolution: 1mV
• AC voltage accuracy” ±(0.8% +3)
• DC Current: 10A
• DC Current resolution: 0.1µA
• DC Current accuracy: ±(1.2%+2)
• AC Current: 10A
• AC current resolution: 0.1µA
• AC Current accuracy: ±(1.5% +3)
• Resistance resolution: 0.1Ω
• Resistance accuracy: ±(1.0% +2
• Continuity: Yes
• Diode Test: Yes
• True RMS Measurements: Yes
• AC Bandwidth: 40Hz to 400Hz
• Display: 2000 count LCD
• Over-range indication: Yes
• Input Impedance: 10MΩ VDC & 10MΩ VAC
• Data Hold: Yes
• Enclosure: Rubber Holster
• Low battery indication: Yes
• Power Supply: 2 x 1.5V AA Batteries
• Weight    : 250g (including battery)
• Dimensions: 150 (L) x 75 (W) x 36 (D) mm

32 Blade Feeler Gauge,
Permanently Etched
Markings on Each Blade
Length (mm): 90
Blister Carded

Metric: 0.38 - .889 mm
Imperial: .0015 - .035

Kaufmann Torpedo Level - 230mm

The MTD75T True RMS 800A AC/DC Clamp Meter is a useful tool that allows you to safely test for electrical problems, motor’s condition and current on appliances. Equipped to test any electrical circuit without disconnecting any wires. Handy function includes a backlit LCD display and Flashlight for working in dimly lit areas. The NCV Non-Contact Voltage detector is useful for a quick check to see it voltage is present on circuit under test. Measures 0.01A to 800A AC & DC, 0.1mV to 600V AC/DC, Temperature, Capacitance, Frequency, Resistance, Continuity buzzer and Diode Test. This 800A AC/DC Clamp Meter has a 28mm Jaw opening and accessories include test leads, temperature air probe and carrying case.


ADDITIONAL INFORMATION:
DC Voltage: 600mV – 6V – 60V – 600V
DC Voltage accuracy: ±(0.5% + 5d)
AC Voltage: 6V – 60V – 600V
AC voltage accuracy: ±(0.8%+5)
DC Current: 60A – 600A – 800A
DC Current accuracy: ±(1.5% +5)
AC Current: 60A – 600A – 800A
AC Current accuracy: ±(1.5% +5)
Resistance: 600Ω – 6kΩ – 60kΩ – 600kΩ – 6MΩ – 60MΩ
Resistance accuracy: ±(0.8% + 1d)
Capacitance: 6nF – 60nF – 600nF – 6uF – 60uF – 600uF – 6mF – 60mF
Capacitance accuracy: ±(2.5% + 5d)
Frequency: 10Hz – 100Hz – 1kHz – 10kHz – 100kHz – 1MHz – 10MHz
Frequency accuracy: ±(0.5% + 4d)
Temperature: -40 to 1000°C
Temperature accuracy: ±(1.0% + 5°C)
Continuity: Buzzer sounds at approx. 50Ω
Diode Test: Test current 0.8mA, open circuit voltage 2.2V
Power source: 2 x 1.5V AAA batteries
Dimensions: 185 x 65 x 37mm
Weight: 180g

Kaufmann - 80cm Aluminium Spirit Level - Silver

The MTD81 is a compact auto ranging multimeter with a 4000 count LCD backlit display. Measuring functions include AC and DC
voltage, AC and DC current, Resistance, Frequency, Capacitance, continuity buzzer and diode test range. This meter meets the International Standard IEC 61010-1 CAT III 600V, and is ideally suited for everyday use by electricians, electronic technicians, students
and DIY users. The meter has a built-in tilt stand for hands free convenience as well as low battery indication and auto power off.


ADDITIONAL INFORMATION:
DC Voltage:400.0mV – 1000V
AC Voltage: 400.0mV – 750V
DC Current: 40mA – 10A
AC Current: 40mA – 10A
Duty Cycle: 1% – 99%
Resistance: 400.0Ω – 40.00MΩ
Frequency: 99.99Hz – 10MHz
Capacitance: 4.000nF – 200.0µF
Continuity: Yes
Build-In Buzzer: Yes
Diode Test: Yes
Battery Test: Yes
ACV Bandwidth: 50Hz to 400Hz
Display: LCD 4000 Count
Over-range indication: “OL” is displayed
Data Hold: Yes
Back Light: Yes
Enclosure: ABS
Batteries: 2 x AAA
Weight: 136g
Dimensions: 130 x 65 x 32mm
Safety Specs: CAT III 600V

The MT550 is a 1000V Digital Insulation Tester easy-to-use handheld meter and has three test voltage ranges 250V, 500V and 1000V together with two continuity ranges. Whilst doing the insulation test, the large LCD will indicate the insulation resistance together with the actual output voltage. Once the test is complete the circuit under test will be automatically discharged. The MT550 features an AC and DC voltage ranges, battery voltage indication, resistance and a continuity buzzer. If AC voltage is detected, the LCD will display the actual voltage to the user except in the off position.

Kaufmann - 20m Fibre Glass Tape Measure

The Tenon Ruler Gauge Card (Imperial/Metric) is a precision measuring tool designed for accurately marking and gauging tenons, mortises, and other woodworking joints. It features dual measurement scales in both imperial and metric units, making it versatile for various projects. Made from durable metal or high-quality plastic, this compact and easy-to-use gauge ensures consistent and precise cuts, improving efficiency in carpentry, joinery, and DIY woodworking applications.