Bulk Pack x 2 Kaufmann - 60cm Aluminium Spirit Level - Silver

The high-precision laser measurement of the Xiaomi Smart Laser Measure offers ±3mm of accuracy, giving you a real-time measurement that is accurate and stable. Its single-button design is easy to use, simply hold the button down for 2 seconds to power on/off, hit to start/end the measurement, or double-click to switch to front/rear-based mode. The high brightness LCD display shows you the current and historical measurement with ease, as well as the test mode, unit, battery, and Bluetooth connection status.

Using the 370mAh high-capacity lithium battery, the device can measure 3000 times on a single charge for extended use. The Type-C interface makes it convenient for recharging the laser measure quickly and easily. You can also easily control the device remotely via the App, allowing you access to data recording, calculation and scene guidance, or simply measure after taking photos in the App as well.

SPECIFICATION:

Measurement Range: 0.05-40 m
Charging Time: Approx. 100 min
Measurement Accuracy: ± (3 mm + 5 × 10-5D)
Automatic Turn-off Time: 180 s
Minimum Displaying Unit: 0.001 m
Automatic Laser Off Time: 180 s
Measurement Unit: m/ft
Operating Temperature: -10℃to 50℃
Laser Type: 630-680 nm wavelength
Storage Temperature -20℃to 60℃
Lithium-ion Battery: 3.7V 370mAh
Storage Humidity: 20%-80% RH
Display Screen: 1.23-inch LCD screen
Bluetooth Transmission Distance: Approx. 8 m (without obstacles)
Frequency Range: 2400-2483.5 MHz
Bluetooth Power: 8 dBm
Charging Input: 5 V 1A
Accuracy: Class 2
Operating Power: 0.7 W (Max.)
Colour: Black
Product Dimensions: 8 × 3 × 12 cm
Product Weight: Approx. 158 g

Bulk Pack x 2 Kaufmann - 40cm Aluminium Spirit Level - Silver

Bulk Pack x 2 Kaufmann Tape Measure Fibre Glass - CRP-J3 20m

Kaufmann Combination Square with Center & Angle

Stainless Steel Vernier Caliper 
Range (mm): 0-150
Resolution: 0.02mm

Brake Fluid Tester
This brake fluid tester uses technology via the integrated circuitry to check for the moisture content within the brake fluid by measuring the electrical resistance. The 3 LED lights are used to show if the moisture content is low enough for the acceptable limits.
The item uses a AAA 1.5Volt battery which is included.

Green LED = Brake Fluid H2O < 1.5%
Brake Fluid OK / (Also = Battery OK)

Yellow LED = Brake Fluid H2O < 1.5%~3.0%
Low Percentage of Water
Advisory to Change Fluid within 6 months

Red LED = Brake Fluid H2O > 3.0%
Brake Fluid Change Required

Bulk Pack x 10 Kaufmann Hardware All Steel Tape Measure - 16mm x 3M

Accud Spring Divider (150mm)

Infrared thermometer for non-contact surface temperature measurements
10:1 optics and high resolution processor for accurate measurement results
Easy to use thanks to the gun-style design
Adjustable emissivity level for differing emission factors on various surface types

The testo 830-T1 infrared thermometer allows efficient, non-contact surface temperature measurements to be carried out. The IR thermometer will leave you well equipped, especially for control readings in trade and industry: The gun-style design is easy to handle and the integrated processor provides accurate measurement results.

Product Description:
The testo 830-T1 IR thermometer with laser measurement spot marker and 10:1 optics is suitable for non-contact surface temperature measurements in trade and industry.

Overview of the advantages of the testo 830-T1 infrared thermometer
Non-contact measurement of the surface temperature is accurate and fast with the testo 830-T1 infrared thermometer (2 measurements a second). To summarise the IR thermometer offers the following advantages:

High resolution processor for utmost accuracy (resolution 0.1 °C)
10:1 optics for precise measurements even at medium distances
IR thermometer with 1 point laser measurement spot marker to target the measuring point
Two alarm limit values that can be defined as required
Visual and acoustic alarm if limit value exceeded
Min./max. value display and hold function (to record a measured value)
Convenient one-handed operation thanks to the ergonomic gun-style design
Clear, illuminated digital display

The speed of the testo 830-T1 IR thermometer is impressive: it can take two measurements a second. This means you can undertake bigger measuring tasks fast and efficiently.

The infrared thermometer emission level can be individually set. This allows you to adjust it precisely to the material of the surface being measured to achieve the best possible measurement results. For untreated surfaces with a low emission level, we recommend using an emission tape (optional) which makes the IR measurement significantly easier.

Technical data:
Temperature Infrared:
Measuring range: -30 to +400 °C
Accuracy: ±1.5 °C or ±1.5 % of mv (+0.1 to +400 °C)
±2 °C or ±2 % of mv (-30 to 0 °C) (the higher value applies)
Measuring rate: 0.5 s
Infrared resolution: 0.1 °C

General technical data:
Dimensions: 190 x 75 x 38 mm
Operating temperature: -20 to +50 °C
Housing: ABS
Battery type: 9V block battery
Battery life: 15 h
Storage temperature: -40 to +70 °C
Weight: 200 g

Bulk Pack x 2 Kaufmann - 30m Fibre Glass Tape Measure

The MTD81 is a compact auto ranging multimeter with a 4000 count LCD backlit display. Measuring functions include AC and DC
voltage, AC and DC current, Resistance, Frequency, Capacitance, continuity buzzer and diode test range. This meter meets the International Standard IEC 61010-1 CAT III 600V, and is ideally suited for everyday use by electricians, electronic technicians, students
and DIY users. The meter has a built-in tilt stand for hands free convenience as well as low battery indication and auto power off.


ADDITIONAL INFORMATION:
DC Voltage:400.0mV – 1000V
AC Voltage: 400.0mV – 750V
DC Current: 40mA – 10A
AC Current: 40mA – 10A
Duty Cycle: 1% – 99%
Resistance: 400.0Ω – 40.00MΩ
Frequency: 99.99Hz – 10MHz
Capacitance: 4.000nF – 200.0µF
Continuity: Yes
Build-In Buzzer: Yes
Diode Test: Yes
Battery Test: Yes
ACV Bandwidth: 50Hz to 400Hz
Display: LCD 4000 Count
Over-range indication: “OL” is displayed
Data Hold: Yes
Back Light: Yes
Enclosure: ABS
Batteries: 2 x AAA
Weight: 136g
Dimensions: 130 x 65 x 32mm
Safety Specs: CAT III 600V

Bulk Pack x 3 Kaufmann - 10m Fibre Glass Tape Measure

Bulk Pack x 10 Kaufmann Line Level

Battery Hydrometer
Glass tube, PVC bulb and spout, easy to use.
For testing specific gravity of  battery fluid.
Tests battery charge accurately and instantly.
Red, White & Green reading colour gauge.

Warning: - Battery acid is corrosive
- Pleases wear  applicable safety equipment.
Avoid contact with skin and eyes

The MT235 battery tester measures all kinds of batteries. The user can choose three measurement methods according to the
battery shape and read the Voltage on the LCD display. Proper use and care of this tester will provide many years of reliable
service.

Battery Type Load Current Minimum Voltage for Good Indication
Button cell 1.5V 50mA 1.125V±0.09V
AAA-N-1.5V 50mA 1.125V±0.09V
AA-C-D-1.5V 150mA 1.125V±0.09V
Lithium 3V 100mA 2.25V±0.18V
6V 10mA 4.5V±0.36V
9V 10mA 6.75V±0.54V
12V 10mA 9V±0.72V
15V 10mA 11.25V±0.9V
22.5V 10mA 16.875±1.35V

King Tony Feeler Gauge Metric 25 Blade (2 Pack) (0.04mm-1mm)

Bulk Pack x 3 Kaufmann Hardware All Steel Blade Tape Measure - 25mm x 8M

Highly Accurate Outside Micrometer For Close Tolerance Work
A micrometric screw is used to assess the size of an object with great precision.
Clear graduations on satin-chrome finish.
Positive locking clamp.
Range (mm): 0 - 25
Accuracy (mm): 0.01
Packing: Plastic case

Accud Feeler Gauge 17 Blade (100mm 0.02-1.00mm)

Hanvo Super Grip Cut Level 5 Nitrile Glove

Highly Accurate Outside Micrometer For Close Tolerance Work
A micrometric screw is used to assess the size of an object with great precision.
Clear graduations on satin-chrome finish.
Positive locking clamp.
Range (mm): 75 - 100
Accuracy (mm): 0.01
Packing: Plastic case

Features:
- Accurate to the millimetre
- Illustration LCD
- Usable in dark and over cast conditions
Specifications:
- Measuring distance 60m
- Levelling bubble on the right hand side of device
- Protects against water splash and dust
- East to clean
- Popular functions such as: Distance, Area, Volumes and Pythagoras
- Display option in feet and/or meters

Accud Feeler Gauge Length (100mm) (0.05-1.00mm) (13 Piece)

Features:
- Ideal for Construcion Companies, Land Surveyors, Engineering Companies and DIY enthusiasts

Specifications:
- Superior Optics with 32X Magnification
- Built-in horizontal circle
- Rugged Compensator