Infrared thermometer for non-contact surface temperature measurements
10:1 optics and high resolution processor for accurate measurement results
Easy to use thanks to the gun-style design
Adjustable emissivity level for differing emission factors on various surface types

The testo 830-T1 infrared thermometer allows efficient, non-contact surface temperature measurements to be carried out. The IR thermometer will leave you well equipped, especially for control readings in trade and industry: The gun-style design is easy to handle and the integrated processor provides accurate measurement results.

Product Description:
The testo 830-T1 IR thermometer with laser measurement spot marker and 10:1 optics is suitable for non-contact surface temperature measurements in trade and industry.

Overview of the advantages of the testo 830-T1 infrared thermometer
Non-contact measurement of the surface temperature is accurate and fast with the testo 830-T1 infrared thermometer (2 measurements a second). To summarise the IR thermometer offers the following advantages:

High resolution processor for utmost accuracy (resolution 0.1 °C)
10:1 optics for precise measurements even at medium distances
IR thermometer with 1 point laser measurement spot marker to target the measuring point
Two alarm limit values that can be defined as required
Visual and acoustic alarm if limit value exceeded
Min./max. value display and hold function (to record a measured value)
Convenient one-handed operation thanks to the ergonomic gun-style design
Clear, illuminated digital display

The speed of the testo 830-T1 IR thermometer is impressive: it can take two measurements a second. This means you can undertake bigger measuring tasks fast and efficiently.

The infrared thermometer emission level can be individually set. This allows you to adjust it precisely to the material of the surface being measured to achieve the best possible measurement results. For untreated surfaces with a low emission level, we recommend using an emission tape (optional) which makes the IR measurement significantly easier.

Technical data:
Temperature Infrared:
Measuring range: -30 to +400 °C
Accuracy: ±1.5 °C or ±1.5 % of mv (+0.1 to +400 °C)
±2 °C or ±2 % of mv (-30 to 0 °C) (the higher value applies)
Measuring rate: 0.5 s
Infrared resolution: 0.1 °C

General technical data:
Dimensions: 190 x 75 x 38 mm
Operating temperature: -20 to +50 °C
Housing: ABS
Battery type: 9V block battery
Battery life: 15 h
Storage temperature: -40 to +70 °C
Weight: 200 g

Total Spirit Level Cylinder Spirit Bulbs 2 Pack (60cm) (2 Pieces)

The MT95 mini sound level meter has a wide dynamic range from 35dB to 130dB and a different frequency weighting, A and C, to respond to human sense or machine monitoring purposes while the modern ergonomic design with large backlit dual display makes it easy to use in any application. The Bluetooth connectivity allows users to transfer and share measured data to a smart phone via the app that is available on both Android and iOS platforms. The MT95 is perfect to use in noisy environments and industries such as engineering, sound quality control, health sector, industrial safety offices in various industries, schools, etc.

Accud Feeler Gauge 17 Blade (100mm 0.02-1.00mm)

Bulk Pack x 10 Kaufmann Hardware All Steel Tape Measure - 16mm x 3M

The MT155 is a compact and handy gauge, designed for non-destructive, fast and precise coating thickness measurements. It is adaptable and can be used on special geometries or on materials with special properties. The coating thickness gauge works either on the magnetic induction principle or on the Eddy current principle, depending on the type of probe used. The MT155 has 31 working modes, displaying the measured values and user information on the LCD, the backlight ensures easy reading of screen data in low light conditions. The probe systems are spring-mounted in the probe sleeve, this ensures safe and stable positioning of the probe and constant pressure. The hemispherical tip of the probe is made of hard and durable material.

Kaufmann Torpedo Level - 230mm

Accud Measuring Tape Acc Nylon Coated Blade (19mm x 5m)

Bulk Pack x 2 Kaufmann - 30m Fibre Glass Tape Measure

Accud Feeler Gauge Length (75mm) (0.04-1.00mm)

Bulk Pack x 3 Kaufmann - 10m Fibre Glass Tape Measure

Bulk Pack x 10 Kaufmann Line Level

Magnetic Stud Finder with Laser Mark. This tool is designed to help locate studs behind walls, allowing for precise and easy installation of fixtures, shelves, or other mounted items. The magnetic sensor detects screws or nails in the stud, while the built-in laser mark ensures accurate alignment. It’s a great tool for DIYers and professionals alike, providing both speed and precision in finding studs without damaging the wall surface. Ideal for drywall, plaster, or wooden wall applications.

Bulk Pack x 8 Kaufmann Aluminium Square - 250mm

Bulk Pack x 6 Kaufmann Builders Square - 200X300mm

Accud Feeler Gauge Length (100mm) (0.05-1.00mm) (20 Piece)

Crankshaft Seal Installer
Installation of the sealing flange with integrated pulse sensor wheel on the crankshaft flywheel side.
For and Group models with 16v 1.4/1.6 engines.
Also used on engines.
For 16v 1.4L 1.6 engines fitted to VW, Audi, Skoda, Fiat


SEAT Arosa 1.4, 1.4, 1.4, 1.4/1.6, 1.4/1.6, and 1.4 16v
SKODA Fabia 1.4, II 1.6, 1.4 and Octavia Roomster 1.4 16v
VW Lupo 1.4/1.6, 1.4/1.6, Polo Classic 1.4 Golf / Bora 1.4/1.6, 1.4 Beetle Caddy 1.4 16v

Engine Timing Tool Set Audi, VW
Used on VAG 2.0 TDi engines in , A4/A6, ; 11, ; , Golf Plus, , .
Set provides essential tools for setting and locking the engine.

Equivalent to OEM Tools: 310 085/T10050, T10100, 3359/T20102, T10115, T10060/A.

; A2 1.4 TDi PD (02-06), A3 1.9, 2.0 TDi PD (02-08), A4 1.2 TDi PD (02-05), A4 1.9, 2.0 TDi PD (04-08), A6 1.9 TDi PD (02-05), ; 1.9 SDi/TDi (05-08), 1.9, 2.0 Tdi PD (05-08), 1.9 SDi/TDi (05-08), ; 1.4 TDi PD (03-06), Octavia II 2.0 TDi PD (03-06), ; 1.9 TDi PD (02-08), 1.9 TDi PD (02-08), 1.4 TDi PD (02-08), 1.9 TDi PD (02-08), 1.4 TDi PD (02-08), 1.4, 1.9 TDi PD (02-08), 1.9 TDi PD (02-08).

Engine Codes:
i: AMF, ASZ, ATD, AVB, AVF, AWX, AXR, AZV, BHC, BKC, BKD, BKE, BLB, BMN, BNA, BPW, BRB, BRC, BRD, BRE, BRF, BUY, BVA, BVF, BVG,
AXR, ATD, AUY, ARL, AJM, ANU, ASU, BLS, BSU, BJB, BST, , BDK, BRU, BKC, AZV, BKD, BMP, BDV, BMP, BMP, BMP, BMP, BMP, BMP, BMP, BMP, BNV, BTB, BVK, BXF, AVQ, AXC, BRR, BRS, ALH, AGR, AXR, AGP, AQM, ASV, AHF, AYQ, AYM, , BDH, BAU, AFB, BVW, CARA, BMK, ASY, BMT, BLT, BRT, BKS, CASA, ABB, X1, ALT, AWT, BJX
 BJB, BKC, BLS, BMM, BXE,
 AMF, AZV, BKD, VW; AJM, AMF, ANU, ARL, ASZ, ATD, AUY, AVB, AVF, AWX, AXR, BAY, BMS, BNM, BNV, BWB.

The Spirit Level 600mm & 30m Chalk Line H/Duty (model DTSL0060B/DTCL030) is a high-quality tool set for precise measurements and alignment. The 600mm spirit level ensures accurate leveling in various applications, while the 30-meter heavy-duty chalk line offers a long, durable line for marking straight, precise measurements over longer distances. Perfect for construction, tiling, and DIY projects, this combination is designed for both reliability and convenience.

The high-precision laser measurement of the Xiaomi Smart Laser Measure offers ±3mm of accuracy, giving you a real-time measurement that is accurate and stable. Its single-button design is easy to use, simply hold the button down for 2 seconds to power on/off, hit to start/end the measurement, or double-click to switch to front/rear-based mode. The high brightness LCD display shows you the current and historical measurement with ease, as well as the test mode, unit, battery, and Bluetooth connection status.

Using the 370mAh high-capacity lithium battery, the device can measure 3000 times on a single charge for extended use. The Type-C interface makes it convenient for recharging the laser measure quickly and easily. You can also easily control the device remotely via the App, allowing you access to data recording, calculation and scene guidance, or simply measure after taking photos in the App as well.

SPECIFICATION:

Measurement Range: 0.05-40 m
Charging Time: Approx. 100 min
Measurement Accuracy: ± (3 mm + 5 × 10-5D)
Automatic Turn-off Time: 180 s
Minimum Displaying Unit: 0.001 m
Automatic Laser Off Time: 180 s
Measurement Unit: m/ft
Operating Temperature: -10℃to 50℃
Laser Type: 630-680 nm wavelength
Storage Temperature -20℃to 60℃
Lithium-ion Battery: 3.7V 370mAh
Storage Humidity: 20%-80% RH
Display Screen: 1.23-inch LCD screen
Bluetooth Transmission Distance: Approx. 8 m (without obstacles)
Frequency Range: 2400-2483.5 MHz
Bluetooth Power: 8 dBm
Charging Input: 5 V 1A
Accuracy: Class 2
Operating Power: 0.7 W (Max.)
Colour: Black
Product Dimensions: 8 × 3 × 12 cm
Product Weight: Approx. 158 g

A Magnetic Stud Finder is a tool used to locate studs (the vertical wooden or metal beams behind walls) by detecting nails or screws that are typically used to attach drywall to the studs. Unlike electronic stud finders, a magnetic stud finder uses a magnetic field to sense metal fasteners embedded in the wall. It’s simple to use: as you move the device across the surface of the wall, the magnet will attract to the metal fasteners, helping you pinpoint the location of the studs. This tool is particularly useful for mounting shelves, pictures, or other wall fixtures, as it ensures you anchor into the stud for a secure hold. Magnetic stud finders are often compact, affordable, and do not require batteries, making them a popular choice for DIY enthusiasts and professionals alike.

The MT235 battery tester measures all kinds of batteries. The user can choose three measurement methods according to the
battery shape and read the Voltage on the LCD display. Proper use and care of this tester will provide many years of reliable
service.

Battery Type Load Current Minimum Voltage for Good Indication
Button cell 1.5V 50mA 1.125V±0.09V
AAA-N-1.5V 50mA 1.125V±0.09V
AA-C-D-1.5V 150mA 1.125V±0.09V
Lithium 3V 100mA 2.25V±0.18V
6V 10mA 4.5V±0.36V
9V 10mA 6.75V±0.54V
12V 10mA 9V±0.72V
15V 10mA 11.25V±0.9V
22.5V 10mA 16.875±1.35V

or professionals who need fundamental wire identification tools without the extra cost, the 3PK-NT023N basic Tone and Probe Kit is the answer. Use it on de-energized AC wire, telephone/twisted pair wire, all voice and data category rated cable, speaker wire, virtually any cable or wire!

Accud Magnetic V-Block (100mm x 70mm x 95mm)