Cold atmospheric plasma is an auspicious new candidate in cancer treatment. Cold atmospheric plasma (CAP) is a partially ionized gas in which the ion temperature is close to room temperature. It contains electrons, charged particles, radicals, various excited molecules and UV photons. These various compositional elements have the potential to inhibit cancer cell activity whilst doing no harm to healthy cells. Glioblastoma (GBM) is the most common and lethal primary brain tumor in adults; treatment including surgery, radio- and chemotherapy remains palliative for most patients as a cure remains elusive. The successful combination of the standard chemotherapeutic temozolomide (TMZ) and CAP treatment features synergistic effects even in resistant glioma cells. In particular in glioma therapy, CAP could offer an innovative approach allowing specific cancer cell / tumor tissue inhibition without damaging healthy cells. Thus CAP is a promising candidate for combination therapy especially for patients suffering from GBMs showing TMZ resistance.

During the past fifteen years there has been a dramatic increase in the number of different surfaces whose structures have been determined experimentally. For example, whereas in 1979 there were only 25 recorded adsorption structures, to date there are more than 250. This volume is therefore a timely review of the state-of-the-art in this dynamic field.

Chapter one contains a compilation of the structural data base on surfaces within a series of tables that allows direct comparison of structural parameters for related systems. Experimental structural trends amongst both clean surfaces and adsorbate systems are highlighted and discussed.

The next chapter outlines the successes of local density functional theory in predicting the relaxations and reconstructions of clean metal and semiconductor surfaces, and the behaviour of adsorbates such as hydrogen, oxygen and alkali elements on metal surfaces, thereby explaining some of the experimental trends observed within the database. These "ab initio" density functional calculations are of ground state properties at the absolute zero of temperature.

Chapter three provides an introduction to finite temperature effects in a pedagogical review of current statistical mechanical treatments of phase transitions at surfaces, many of which display the prominent role of fluctuations or non-mean field behaviour.

The final chapter discusses the relationship of the reactivity of a surface to its morphology and composition, which is particularly relevant to a fundamental understanding of catalysis.

The first comprehensive account of the theory of mass transportation problems and its applications. In Volume I, the authors systematically develop the theory with emphasis on the Monge-Kantorovich mass transportation and the Kantorovich-Rubinstein mass transshipment problems. They then discuss a variety of different approaches towards solving these problems and exploit the rich interrelations to several mathematical sciences - from functional analysis to probability theory and mathematical economics. The second volume is devoted to applications of the above problems to topics in applied probability, theory of moments and distributions with given marginals, queuing theory, risk theory of probability metrics and its applications to various fields, among them general limit theorems for Gaussian and non-Gaussian limiting laws, stochastic differential equations and algorithms, and rounding problems. Useful to graduates and researchers in theoretical and applied probability, operations research, computer science, and mathematical economics, the prerequisites for this book are graduate level probability theory and real and functional analysis.

In addition to structure formation in crystallizing polymers and semicrystalline polymers, this second edition completes the topic of transport phenomena. It also reviews solidification by crystallization during cooling and under flow or pressure, which all play an enormous role in polymer melt processing. Generally, there is an intensive interaction between three transport phenomena: heat transfer, momentum transfer (flow, rheology) and (flow induced) crystallization. The strong interaction between the three transport phenomena is a major challenge when it comes to experimentation, and advances in this area are detailed in the book, guiding further development of sound modeling. This book enables readers to follow an advanced course in polymer processing. It is a valuable resource for polymer chemists, applied physicists, rheologists, plastics engineers, mold makers and material scientists.

While dealing with the design and operation of ion sources, this book additionally discusses the physics of ion formation of the various elements with different charge states and charge neutralization. Ion selection and beam diagnostics are equally included, and the presentation of the necessary equations and diagrams for the various parameters makes this a useful handbook for ion sources.

Although based on lectures given for graduate students and postgraduates starting in plasma physics, this concise introduction to the fundamental processes and tools is as well directed at established researchers who are newcomers to spectroscopy and seek quick access to the diagnostics of plasmas ranging from low- to high-density technical systems at low temperatures, as well as from low- to high-density hot plasmas. Basic ideas and fundamental concepts are introduced as well as typical instrumentation from the X-ray to the infrared spectral regions. Examples, techniques and methods illustrate the possibilities.

This book directly addresses the experimentalist who actually has to carry out the experiments and their interpretation. For that reason about half of the book is devoted to experimental problems, the instrumentation, components, detectors and calibration.

This Brief describes the influence of the different organic chelating agents on the topography, physical properties and phases of SPPS-deposited spinel ferrite splats. The author describes how by using the SPPS process, the coating is produced directly from a solution precursor and how all physical and chemical reactions such as evaporation, decomposition, crystallization and coating formation occur in a single step. The author details not only the innovative approach to liquid feeding, but also focuses on its effects on the spinel ferrite system. The results of experimentation as well as detailed explanations of the experiments are included.

This book is based mostly on the reports presented at the XVth International lahn-Teller Symposium on Vibronic Interactions in Crystals and Molecules and NATO Advanced Research Workshop Colossal Magnetoresistance and Vibronic Interactions that took place at Boston on August 16-22 of the year 2000. This is the first time the Symposium took place in the USA where recently the giant splash of the attention to the 1 ahn-Teller effect occurred. This tremendous interest to the field all over the world is reflected not only in the numerous publications in many American and European 10urnals, but of the leading scientists from additionally in the Symposium's participation the well known Universities, National Laboratories and industrial companies, which was the largest in the history of the Symposium. The renaissance of the 1ahn-Teller physics is closely related to the three fundamental discoveries in science. The most significant among them is the discovery of high-Tc superconductivity by K. -A. Muller and G. Bednorz, for whom the "1ahn-Teller idea" was the motivation in their search. The result of this search is well known - a wide spectrum of the 1ahn-Teller ion based materials with Tc between 24K and 135K were found. The second discovery is the existence of a new polymorph of carbon - the C60. The microscopic analysis of all physical, chemical and biological properties of the buckyballs is based on 1ahn-Teller type of interactions. The third is colossal magnetoresistance.

The Symposium on which the present book is based focused on out-of-ecliptic results obtained by the highly successful Ulysses mission prior to the start of its first polar pass. Topics addressed include the solar corona, the large-scale structure of the solar wind and heliosphere, energetic particles and cosmic rays, and interstellar gas and cosmic dust. The papers published here provide an up-to-date account of our understanding of the three-dimensional structure of the heliosphere near solar minimum. Particular emphasis is placed on in-situ measurements made by Ulysses covering the range of solar latitudes from the Equator to 50 degrees South.

This book features selected works presented in the 28th National Conference on Condensed Matter Physics, "Condensed Matter Days (CMDAYS) 2020", which was held from December 11th to 13th December 2020. The conference brought together seasoned experts and upcoming researchers from all over India to share their research and ideas in the field of condensed matter physics. This book is a glimpse into the works and ideas that were discussed and presented at the conference. It includes works on diverse fields from nanomaterials to fuel cells, photocatalysis to ferromagnetism, application studies to fundamental studies.

Nanophase Materials is the first and, as yet, the only comprehensive book published in this new and exciting area of materials science. It gives a broad overview of the revolutionary new field of nanophase materials; a view which spans the materials, physics, and chemistry research communities at a tutorial level that is suitable for advanced undergraduates, graduate students, postdoctoral researchers, and experts or would-be experts in the science of nanostructured materials. The articles are authored by many of the world's most prominent scientists in this field. The book covers the diverse methods for synthesizing nanophase materials, a variety of subsequent processing methodologies, what is known about the structures of these materials on various length scales from atomic to macroscopic, and the properties of these unique and novel materials. The materials properties covered are mechanical, electronic, optical, and magnetic and hence span a wide range of important new opportunities for technological applications.

Intended for graduate students in physics and chemistry, this book touches on granular matter, protein folding, phase separating and evolution kinetics. Taking glasses as a central theme, it presents the problem of slow dynamics from several angles, a ubiquitous feature in condensed matter, mechanics and biological physics. Some of the best established workers in the field present different theoretical and experimental approaches to the subject.

Digital photography, MP3, digital video, etc. make extensive use of NAND-based Flash cards as storage media. To realize how much NAND Flash memories pervade every aspect of our life, just imagine how our recent habits would change if the NAND memories suddenly disappeared. To take a picture it would be necessary to find a film (as well as a traditional camera...), disks or even magnetic tapes would be used to record a video or to listen a song, and a cellular phone would return to be a simple mean of communication rather than a multimedia console. The development of NAND Flash memories will not be set down on the mere evolution of personal entertainment systems since a new killer application can trigger a further success: the replacement of Hard Disk Drives (HDDs) with Solid State Drives (SSDs). SSD is made up by a microcontroller and several NANDs. As NAND is the technology driver for IC circuits, Flash designers and technologists have to deal with a lot of challenges. Therefore, SSD (system) developers must understand Flash technology in order to exploit its benefits and countermeasure its weaknesses. Inside NAND Flash Memories is a comprehensive guide of the NAND world: from circuits design (analog and digital) to Flash reliability (including radiation effects), from testing issues to high-performance (DDR) interface, from error correction codes to NAND applications like Flash cards and SSDs.

This book presents written versions of selected invited lectures from the spring meeting of the Arbeitskreis Festkorperphysik of the Deutsche Physikalische Gesellschaft which was held from 27 to 31 March 2006 in Dresden, Germany. Many topical talks given at the numerous symposia are included. Most of these were organized collaboratively by several of the divisions of the Arbeitskreis. The book presents, to some extent, the status of the field of solid-state physics in 2006 not only in Germany but also internationally.

This book is concerned with polymeric hydrogels, which are considered as one of the most promising types of new polymer-based materials. Each chapter in this book describes a selected class of polymeric hydrogels, such as superabsorbent hybrid nanohydrogels, conducting polymer hydrogels, polysaccharide-based or protein-based hydrogels, or gels based on synthetic polymers. In this way, the book also addresses some of the fascinating properties and applications of polymeric hydrogels: they are three-dimensional, hydrophilic, polymeric networks that can absorb, swell and retain large quantities of water or aqueous fluids. In combination with metal nanoparticles, nanofibrils or nanowhiskers, which may be embedded in the gels, they find widespread applications, ranging from agriculture, and waste water treatment, over electronics, to pharmaceutical and biomedical applications. Applications mentioned in this book include electro sensors, capacitors, electromechanical actuators, and even artificial muscles.

This introduction to materials science for engineers examines not only the physical and engineering properies of materials, but also their history, uses, development, and some of the implications of resource depletion, materials substitutions, and so forth. Topics covered include: the stone, copper, bronze, and iron ages; physical properties of metals, ceramics, and plastics; electrical and magnetic properties of metals, semiconductors, and insulators; band structure of metals; metallurgy of iron. This new edition includes new developments in the last five years, updated graphs and other dated information and references.

Theory of Nonlinear Propagation of High Harmonics Generated in a Gaseous Medium establishes the theoretical tools to study High-Order Harmonic Generation (HHG) by intense ultrafast infrared lasers in atoms and molecules. The macroscopic propagation of both laser and high-harmonic fields is taken into account by solving Maxwell's wave equations, while the single-atom or single-molecule response is treated with a quantitative rescattering theory by solving the time-dependent Schroedinger equation. This book demonstrates for the first time that observed experimental HHG spectra of atoms and molecules can be accurately reproduced theoretically when precise experimental conditions are known. The macroscopic HHG can be expressed as a product of a macroscopic wave packet and a photorecombination cross section, where the former depends on laser and experimental conditions while the latter is the property of target atoms or molecules. The factorization makes it possible to retrieve microscopically atomic or molecular structure information from the measured macroscopic HHG spectra. This book also investigates other important issues about HHG, such as contributions from multiple molecular orbitals, the minimum in the HHG spectrum, the spatial mode of laser beams, and the generation of an isolated attosecond pulse. Additionally, this book presents the photoelectron angular distribution of aligned molecules ionized by the HHG light.

This book offers concise information on the properties of polymeric materials, particularly those most relevant to physical chemistry and chemical physics. Extensive updates and revisions to each chapter include eleven new chapters on novel polymeric structures, reinforcing phases in polymers, and experiments on single polymer chains. The study of complex materials is highly interdisciplinary, and new findings are scattered among a large selection of scientific and engineering journals. This book brings together data from experts in the different disciplines contributing to the rapidly growing area of polymers and complex materials.

Background on Semimagnetic Semiconductors.- Thermodynamics and Crystal Growth of Diluted Magnetic Semiconductors.- Band Structure and Theory of Magnetic Interactions in Diluted Magnetic Semiconductors.- Transport phenomena in Semimagnetic Semiconductors.- Experimental Studies of the d-d Exchange Interactions in Diluted Magnetic Semiconductors.- Bound Magnetic Polarons in Diluted Magnetic Semiconductors.- Magnetooptic Properties of Wide Gap II1?xMnxVI Semimagnetic Semiconductors.- II-Fe-VI Semimagnetic Semiconductors.- Semimagnetic IV-VI Compound Semiconductors.- Semimagnetic Semiconductor Superlattices.- Magnetism of Fe-Based Diluted Magnetic Semiconductors.

Atomic transport in solids is a field of growing importance in solid state physics and chemistry, and one which, moreover, has important implications in several areas of materials science. This growth is due first to an increase in the understanding of the fund amentals of transport processes in solids. Of equal importance, however, have been the improvements in the last decade in the experi mental techniques available for the investigation of transport phenomena. The advances in technique have stimulated studies of a wider range of materials; and expansion of the field has been strong ly encouraged by the increasing range of applied areas where transport processes play an essential role. For example, mass transport phenomena play a critical role in the technology of fabrication of components in the electronics industry. Transport processes are involved both during the fabrication and operation of devices and with the growing trend to miniaturisation there are increasing demands on accurate control of diffusion processes. The present book (which is based on a NATO sponsored Advanced Study Institute held in 1981 at Lannion, France) aims to present a general survey of the subject, highlighting those areas where work has been especially active in recent years."

The textbook we offer to the reader is based on a two-term course of lec tures, "Electromagnetic Response of Material Media," that the authors gave for a number of years to the final-year students of the Physics Depart ment of Moscow University. This course built on courses in quantum electronics, nonlinear optics and theoretical fundamentals of quantum radiophysics; students are as sumed to have mastered the fundamentals of quantum mechanics, laser physics and nonlinear optics. The essential core of the course, and hence of the book, is the current general theory of electromagnetic response of a nonrelativistic medium. The main aspects are presented in Chapters 1 and 2. The second part is devoted to more traditional topics which students learn in this course of lectures and also in the course "Condensed Matter Physics" for students who choose to major in radiophysics and laser physics; this course is also taught by the authors at the Physics Department. This volume was intended as a text for students and, as such, does not cite original publications. We decided to provide a list of additional recommended literature, mostly of well known, easily accessible textbooks."

Pulse Generation and Detection: Terahertz Radiation from ElectroOptic Crystals (X.C. Zhang et al.). Photoconductive Semiconductor Switches for High Power Radiation (G.M. Loubriel). Broadband Electronic Systems and Components: Pulse Generation and Compression on a TravellingWave MMIC Schottky Diode Array (M. Dragoman et al.). Precursor of an UltraWideband Radar System (A.S. Podgorski). Antennas and Arrays: Impulse Radiating Antennas (C.E. Baum, E.G. Farr). WideBandwidth Radiation from Arrays of Endfire Tapered Slot Antennas (D.H. Schaubert). Pulse Propagation and Guidance: Ultrashort Pulse Response in Nonlinear Dispersive Media (R. Albanese et al.). Modulation and Noise in Soliton Pulse Trains (J.M. Arnold). Scattering Theory and Computation: Phase Error Control for FDTD Methods (P.G. Petropoulos). Signal Processing Techniques: Stable Pole Extraction from Scattering Data (S.U. Pillai, T.I. Shim). 49 additional articles. Index.

These proceedings comprise invited and contributed papers presented at the 14th International Conference on X-Ray Lasers (ICXRL 2014). This conference is part of a continuing series dedicated to recent developments and applications of x-ray lasers and other coherent x-ray sources with attention to supporting technologies and instrumentation. New results in the generation of intense, coherent x-rays and progress toward practical devices and their applications in numerous fields are reported. Areas of research in plasma-based x-ray lasers, 4th generation accelerator-based sources and higher harmonic generation, and other x-ray generation schemes are covered. The scope of ICXRL 2014 included, but was not limited to: Laser-pumped X-ray lasers Discharge excitation and other X-ray laser pumping methods Injection/seeding of X-ray amplifiers New lasing transitions and novel X-ray laser schemes High Harmonic sources-Free-electron laser generation in the XUV and X-ray range Novel schemes for coherent XUV and X-ray generation XUV and X-ray optics and metrology-Driving laser technology Theory and modeling of X-ray gain medium and beam characteristics Applications of high brightness and ultrashort X-ray sources

The second half of the twentieth century and the beginning of the twenty ?rst have been characterized by the most impressive industrial revolution ever seen. In - proximately 40years, the complexity of integrated circuits (ICs) has increased by a 9 factor of 10 , with a corresponding reduction of the cost per bit by eight orders of magnitude. Not only has this evolution allowed dramatic progress in allscienti?c ?elds (large computers, space probes, etc.), but also has fueled the economic development with the raise of new markets (personal computers, cellular phones, etc.) and even social revolutions (world wide web, global village, etc.). In last years, however, the situation has signi?cantly changed: the continuous scaling down of device size has eventually brought the IC major technique, p- tolithography, to its limits. Overcoming its original limits has been proved to be possible, but the price to pay for that has changed the playing rules - while at the beginning of the IC history the evolution was driven by technology, now it is driven by economy, the cost of a medium size production plant being in the range of a few billion dollars.