Royal Talens Varnish Matt Spray will provide durable protection for an oil painting as a final matt varnish. Apply when the paint film has completely dried (with normal layer thickness after approximately one year). It dries in a few hours and does not yellow. Dry varnish coats can be removed with white spirit or turpentine.This product is extremely flammable - use with caution. 

On some of these surfaces it is recommended a basecoat of the Polyurethane Primer (62.601) for best results. Premium colours are flexible and exceptionally durable and permit prolonged exposure to weather without fading or losing their brilliance. Premium colours have been formulated with micronized, permanent pigments and an extremely resistant, exterior grade hybrid resin-polyurethane base, which withstands impacts, resists chipping and cracking, as well as direct exposure to heat and outdoor elements without cracking or fading, and is fuel residue proof up to a least 35% Nitro. AV Premium colours have superior flow, they are self-levelling and brush on with exceptional ease. For airbrushing, the colours can be used directly from the bottle when using a nozzle size 0,3. For the metallic colours some dilution might be necessary, and for smaller nozzles (O.2mm or less) the use of the Reducer (62.068) may be required. The recommended compressor setting is 30-60psi (2-4 bar). The range consists of 20 bright opaque colours, 23 dazzling metallics and fluorescents, and 9 shimmering transparent Candy Colours. All colours are as suitable for detail work as for covering large surfaces and can be applied by brush as well as by airbrush. The range is complete with 8 auxiliary products including the Transparent Basecoat and the Reducer, Primer, Varnishes and Drying Retarder. For an automotive refinishing and as an extra protective final coating, we recommend a catalyzed urethane clear varnish (spray can or airbrush).

A traditional general varnish with a high gloss finish for the protection of oil, alkyd and acrylic paintings. Please be aware that there are restrictions on the shipping of aerosols.

Provides removable protection for a variety of surfaces including wood, metal and paper.

Provides permanent non-removable protection for a variety of surfaces including wood, metal and paper. For fine art usage picture varnishes should be removable so that paintings can be cleaned. These all purpose varnishes are not removable and therefore are not suitable for fine art applications.

TotalCast Resin is an optically clear, high-gloss, hybrid polymer resin system which is suitable for the protection and decoration of artwork, paintings or sculptures. This is because it provides a tough coating with good abrasion resistance.

It is easy to use because it cures at room temperatures and is self-levelling. The resin is non-flammable, odour-free and has no solvent content. It is also free of volatile organic compounds (VOCs), is non-toxic and has non-yellowing properties. It is for use on all art surfaces including canvas, wood, MDF and photographs, and can be used over acrylic, oil, watercolour and enamel paint.

This kit consists of 1kg of each component (Resin & Hardener). The Mixing Ratio is 1 : 1

Please note, the mixing ratio must be accurately followed. It is not possible to change the ratio. This would adversely affect the mechanical properties of the resin and would lead to it not drying properly. The mixture should be thoroughly stirred (mix for 3-4 mins) to ensure full homogeneity. Polymer systems tend to heat up much faster in a pot than as a thin film. Therefore mix only the necessary amount usable within the given pot life.