Festool Sanding Discs Stf D125/8 P320 Gr/10 Granat 497150

Washer Leather 4-1/2 Inch

The Pony Press Screw 18" is a durable and reliable tool designed for use in woodworking, metalworking, and other applications where clamping is required. With an 18" length, it provides a substantial reach and clamping force for securing workpieces in place during tasks such as gluing, assembly, or pressing. The press screw typically features a sturdy steel construction, ensuring strength and longevity, and is designed for smooth operation to maintain consistent pressure. Ideal for both professional and DIY users, the Pony Press Screw is a valuable addition to any workshop where reliable clamping is necessary.

Binding Wire - 500g 1.25mm (Pack of 2)

Bulk Pack x 2 Flash Harry Squeeze N' Seal Grey 1L

PVC auto-wire, prepacked.

Bulk Pack x 2 Flange Black FF Weld On Table D 80mm

King Tony Bit Impact Flat (4 Pack) (9 x 36mm)

Hexagon Retreading Dies HSS
Size (mm): M12
Pitch: 1.75

Tork Craft Blade Tct Atb Positive (230 x 24T) (30/1/20)

The Annular Hole Cutter TCT 75 x 55mm Weld Shank 31.75mm is a high-performance tool designed for precise hole cutting in tough materials. Key features include:

TCT (Tungsten Carbide Tipped) teeth, providing excellent durability and cutting performance, especially when working with hard materials like steel and metal.
75mm outer diameter and 55mm cutting depth, making it suitable for deep, precise hole cutting.
Weld shank (31.75mm), ensuring secure attachment to machines, allowing for stable and efficient operation.
This cutter is ideal for industrial applications where high precision, fast cutting, and long-lasting performance are required for creating clean, accurate holes.

Rainjet Micro Aluminium Peg - 0.5M (20 Piece Pack)

Full Flow Male Adaptor - 15mm x 1/2" (Pack of 5)

Prepack fuses for automotive use.

Prepack fuses for automotive use.

Conduit Adaptor Male - SABS - 20mm - 50 Pack

Bulk Pack x 20 Insert Nylon Barrel 25mm

Bulk Pack x 4 Pentagon Twine Cotton 500g

Bulk Pack x 12 Holts Adhesive Gun Gum 200g

Dishwashing liquid Xtra with fresh concentrated citrus is a biodegradable high-foaming neutral detergent used for the daily washing of dishes, glass, and cutlery and for the effective degreasing of pots, pans, and cooking utensils.

Application:
Diluted in water may be used for general cleaning applications. Dishwashing: Add 5ml-10ml of product into 10lt sink, hot water. Pot & Pans: Add 20ml of product into 10lt sink, hot water soak, and scrub. Rinse dishes, glass & cutlery with clean water prior to drying. Dilute in hot or cold water as desired to suit general cleaning applications.

THE POWR RANGE OF WATERPROOFING PRODUCTS ARE IDEAL FOR THE HARSH SOUTH AFRICAN CLIMATE.

POWR now provides you with all your high quality, eco-friendly, waterproofing products under one trusted brand.

Introducing our dynamic waterproofing range – the ultimate solution to protect your surfaces against moisture, leaks, and water damage. Our range of high-performance waterproofing solutions include POWR Rubber Seal, POWR Bonding Liquid, POWR Membranes and POWR Waterproofing Tapes. They are specially formulated to provide a reliable barrier against the elements, keeping your walls, floors, and structures waterproof and pristine. POWR Waterproofing products that offer both a variety of functional solutions and easy application.



PERFORMANCE BENEFITS:
•Bonds to most construction materials
•Elongates 100% with 95% recovery - Highly stretchable and contracts to its original form.
•Withstands thermal cycling
•Puncture resistant
•Strong UV exposure
•Withstands exposure to industrial chemicals
•Improves lifespan of coated substrates.
•Corrosion control.
•Encapsulation (Asbestos).
•Environmentally Friendly and can be applied were rainwater is harvested.
•Waterproofing that can withstand ponding of water.
•Can be applied to all construction materials
•Spray, paint or roller applied.
•Total ambient temperature application - No heating or propane flame heating required.
•Seals joints and covers fine cracks

PRODUCT USES:

•For all roof types/structures including:
•Fibre cement roof sheets
•Cement roof tiles
•Chromadek
•Zinc Alum and AluZinc
•Exterior trims such as facias, gutters, window sills and cement garden pots

APPLICATION:
•Always Mix POWR Rubber Seal well before use.
•Make sure all substrates are completely clean, sound, dry, and free from any laitance (a white film that forms on the surface of drying concrete), fungus, grease, oil, or loose and flaking particles.
•Do not dilute POWR Rubber Seal (application ready)
•Apply two coats by brush or roller
•A third coat is recommended for coastal areas.
•Determined by the condition, allow approximately an hour drying time between coats.
•Touch dry time is approximately 2 hours in hot dry conditions (25°C)


POWR WATERPROOFING MEMBRANE APPLICATION:
•Apply a generous coat of POWR Rubber Seal.
•Press membrane into wet POWR Rubber Seal surface.
•Apply a generous coat of POWR Rubber Seal over membrane until covered and allow to dry for 90 minutes
•Apply a final coat of POWR Rubber Seal over coated surfaces.


GALVANIZED METAL ROOF SHEETING APPLICATION:
Wash all fungi-infested areas and cracks with a Fungi Wash and leave for 24 hours to react. This will kill spores and limit fungal growth. Remove all loose flaking and powdery paint or surface laitance by pressure washing. Prime all rust-affected areas ( if any ) with Triple Red Rust Converter.



NEW METAL SURFACES:
Apply one coat of Anti Corrosion Metal Primer to entire surface and allow to dry for 2-3 hours before overcoating. The area must be overcoated within 24 hours to prevent a loss in adhesion. Apply two coats of POWR Rubber Seal (0.8kg - 1kg / m2)


WEATHERED METAL SURFACES:
Apply one coat of Anti Corrosion Metal Primer to entire surface and allow 2-3 hours drying time before overcoating. The area must be overcoated within 3 days to prevent a loss in adhesion. Apply two coats of POWR Rubber Seal ( 0.8kg - 1kg / m2)


PROBLEMATIC METAL AND BITUMEN SURFACES:
An Acid Metal Etch Primer is advisable to use as a substitute for Anti Corrosion Metal Primer under the following circumstances: Where flaking of factory-coated metal sheeting is observed. Over areas that were coated with bituminous products apply Bitumen Barrier Primer.


METAL AND CHROMADECK ROOF SHEETING:
Wash all fungi-infested areas with a Fungi Wash and leave for 24 hours to react. This will kill spores and limit fungal growth. Remove all loose flaking and powdery or surface laitance by pressure washing. Prime all rust-affected areas (if any) with Triple Red Rust Converter. Scour the entire surface with a scouring pad to promote adhesion of the subsequent coatings.
APPLICATION:
•Apply a coat of Anti Corrosion Metal Primer.
•Prime all areas (full primer) and allow to dry for +- 8 hours.
•Apply two coats of POWR Rubber Seal ( 0.8kg - 1kg /m)


ASBESTOS, NUTEC ROOF SHEETING AND CEMENT TILES:
Wash all fungi-infested areas with a Fungi Wash and leave for 24 hours to react. This will kill spores and limit fungal growth. Remove all loose, flaking and powdery or surface laitance by pressure washing. Prime all rust-affected areas (if any) with Triple Red Rust Converter.
Scour the entire surface with a scouring pad to promote adhesion of the subsequent coatings.
APPLICATION:
•Apply one coat of POWR Bonding Liquid to all areas (full primer), and allow to dry for +- 8 hours.
•Apply two coats of POWR Rubber Seal ( 0.8kg - 1kg/m2)


COVERAGE:
•Coverage will vary depending on the substrates/surface porosity.
•Coverage must be between 0.8kg - 1kg / m2


MAINTENANCE COAT:
To ensure warranty a maintenance coat must be applied every 3 - 4 years

WHAT MAKES IT UNIQUE:
•Spray or brush applied at ambient temperature
•Cures into a seamless membrane
•Excellent Waterproofing
•Corrosion resistance
•Chemical resistance
•Encapsulation


ROOF COVER APPLICATION:
•Waterproofing
•Encapsulating
•Rust Prevention
•Rust Rehabilitation
•Chemical protection

ROOF SURFACES:
•Metal Sheeted Roofs
•Tiled Roofs
•Asbestos / Nutech Roofs
•Concrete Slab Roofs


CLEAN UP:
Clean equipment with warm, soapy water


TRANSPORTING PAINT:
It is important to make sure that your paint products are properly and safely secured upright when transporting them.


SAFETY PRECAUTIONS:
•Keep out of reach of children.
•Read the label before use
•Ensure good ventilation during application and drying.
•In case of skin contact, wash with soap and water or a recognized skin cleaner. Avoid contact with eyes - in case of contact, rinse your eyes immediately with plenty of water and seek medical advice if symptoms persist. If ingested, drink plenty of water/milk. Do not induce vomiting. Seek medical attention.
•Store in a closed container.
•Store in a well-ventilated place.
•Keep cool.
•Dispose of contents/containers by local regulations
•Refer to safety data sheets and technical data sheets for further information

An auger drill bit is used to bore holes in timber. It is great for drilling holes in thatch poles to insert threaded rods.

The design is very similar to a forstner drill bit, as it "shaves" itself through the wood. A low rpm rotary drill with a planetary gearbox is required to be used with auger drill bits.

The Gunsmithing Set 89PC Screwdriving Set Professional is a comprehensive tool kit designed for gunsmithing and other precision work. Here's what it typically includes:

89 Pieces: The set contains a wide variety of tools, including a range of screwdriver bits, handles, and other accessories.
Screwdrivers & Bits: This set likely includes a selection of screwdrivers and driver bits in various sizes and shapes, specifically suited for working with firearms or other delicate, small components. This allows for precise and safe disassembly and assembly.
Professional Quality: The set is made with high-quality materials designed for professional use, ensuring durability and reliability during frequent or demanding tasks.
Versatility: While primarily intended for gunsmithing, the set can be used for a variety of other tasks, such as working on watches, small electronics, or other fine mechanics that require precision.
Ergonomic Handles: Often, these sets come with ergonomic handles designed for comfort during extended use, providing better control and reducing hand strain.
This Gunsmithing Screwdriving Set is ideal for professionals or hobbyists working on firearms or any task requiring precision and a variety of small driver tools. The 89 pieces offer a wide selection to cover various screw types and sizes.

Festool Abrasive Sheet Stf P320 Gr/50 Granat 497164 (80 x 400)

Flange Black FF Weld On Table D 300mm