Domestic charger for 12V lead acid automotive batteries.

Poltek Poultry Tube Feeder - 3/100

General purpose sealant for all coarse metal threads.
Suitable where a fast cure is required or at low temperatures: e.g. outdoor plant maintenance.

Collared jacket with internal hanger loop.
A concealed fixed stow away hood with drawstring fasteners and velcro closure for safety Prevents the hood from attaching to objects when not in use and promotes aesthetics.
A heavy-duty full non-metal zip front, with outer storm flap that has large plastic press studs for ease of use when wearing gloves.
An internal storm cuff prevents water from running down your sleeves.
There are 2 large waist pockets on the jacket with straight cut flaps, that prevents water from seeping into the pockets The utility/phone pocket with Velcro closure on the left breast secures and prevents your phone/pens. from falling out when bending whilst the internal left breast pockets is useful in keeping your wallet etc from getting wet.
High visibility reflective tape on arms, wrist, shoulders, waist and breast provides enhanced high visibility when working in poor lighting environments Easy drying after washing due to the inner jacket water drainage system.

General purpose.

For acidic surfaces such as chromated or galvanised surfaces.
For porous substrates such as wood, paper, leather, cork and fabric.

Quick drying time, within 5 seconds.

Removes cured gasket sealants and traditional gaskets in 10 to 15 minutes.

Minimal scraping.
Usable on most types of surface.
Do not use on plastic or painted surfaces

The Loctite 406 super glue is a 20g, low viscosity for use with cyanoacrylate adhesive. It is made to connect plastic and elastomeric materials in situations where very quick fixturing is necessary. When needed, the 406 is ideal for your application since it has thin bond lines, which have fast cure speeds, and rising bond gaps, which have lower cure speeds. All of the models are well made and very dependable.

Loctite 55 Thread Sealing Cord is designed for the locking and sealing of metal and plastic pipes and fittings. It needs no cure time and results in an immediate, full pressure seal. The ideal choice for a quick, easy and reliable seal. The product has approval for gas and potable water and is certified to NSF/ANSI, Standard 61.

Ideal for use on rigid flanges where high temperature and chemical resistance are necessary.

Plastic Water Can With Tap - 25L

The Loctite green 50ml pipe and thread sealant green liquid are designed for permanent locking and sealing of threaded fasteners. This product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage from shock and vibration. This product is composed of methacrylate and requires no mixing. It is particularly suited for use on inactive substrates and/or where maximum resistance to hot oil is required.
Supplied with Material Safety Data Sheet, Thread locking and Retainers

Benefits:
High strength
Low viscosity
Cure time is 6 hours
Steel fixture time is 10 minutes
Brass fixture time is 4 minutes
Stainless steel fixture time is 25 minutes
Tolerates slight contaminations of industrial oils
Fluoresces to allow quality control and inspection
Operating temperature ranges between -55°C and 150°C
Prevents unwanted movement, loosening, leaks and corrosion
Resists vibration
Seals threads- Allows through-hole tapping

Applications:
Used for chromate surfaces
Suitable for all the metal fasteners

Certifications:
ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007

Made from premium full grain Crazy Horse leather.
Steel midsole protects against penetrating surfaces and objects.
Cleated oil and slip resistant outsole, SRC (Slip resistance on ceramic tile floor with NaLS (sodium lauryl sulphate) and on steel floor with glycerine^c).
Dual density PU (Polyurethane) lightweight outsole and an insole with anti-static technology.
Heat insulation properties on the outsole up to 95°C.
Outsole with energy absorption heel.
Removable and breathable PU and Memory Foam insole designed for superior comfort.
Impact resistant steel toe cap rated up to 200 ± 4 Joules.

Product Rating:
Conforms to EN ISO 20345:2011, NRCS/9002/217251/XXXX as per SANS 20345:2014

Made from premium full grain Crazy Horse leather.
Steel midsole protects against penetrating surfaces and objects.
Cleated oil and slip resistant outsole, SRC (Slip resistance on ceramic tile floor with NaLS (sodium lauryl sulphate) and on steel floor with glycerine^c).
Dual density PU (Polyurethane) lightweight outsole and an insole with anti-static technology.
Heat insulation properties on the outsole up to 95°C.
Outsole with energy absorption heel.
Removable and breathable PU and Memory Foam insole designed for superior comfort.
Impact resistant steel toe cap rated up to 200 ± 4 Joules.
Product Rating:
Conforms to EN ISO 20345:2011, NRCS/9002/217251/XXXX as per SANS 20345:2014

LOCTITE 277 is a red methacrylate-based threadlocking glue with a high strength and viscosity. It has a fixing time of 30 minutes on steel, 25 minutes on brass, and 270 minutes on stainless steel, making it ideal for situations where adhesive migration must be avoided. Tolerates minor contamination from industrial oils. Suitable for big threads. Fluoresces to facilitate monitoring.

Black leather upper, steel toe cap and lace-up closing.
Injected dual density polyurethane sole.
Polyurethane tongue and collar.
Non-woven vamp lining.
Mesh quarter lining.
Non-woven insole.
Mesh and EVA insock.
SB + Closed seat + A + E.

Works on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces).

Tolerates slight contamination of industrial oils e.g. engine oils, corrosion prevention oils and cutting fluids.
Prevents loosening on vibrating parts e.g. pumps, gear boxes or presses.
Permits disassembly with hand tools for servicing.

LOCTITE LB 8014 is a white, metal-free, food grade lubricant and anti-seize made from white oil and extreme pressure (EP) additives. It guards against friction, seizing, and galling in parts made of metal, including stainless steel. It has a 0 NLGI grade, is H1 NSF Registered, and is temperature resistant to +400°C; No. 123004.

Kaufmann 1100w Swimming Pool Pump

50mm silver flame-retardant double-needle topstitched reflective tape on arms & legs
YKK concealed brass zips with a 2-way slider
2 breast pockets with V-flap
2 hip side pockets and tool pocket on pants
1 back hip pocket
Fully triple-stitched garment
Elasticated cuffs
The natural fibres add comfort and breathability
Protection in the event of a Flash Fire, Accidental Chemical Spillage
Suitable For Use In:
Petrochemical, Oil, and Gas
Mining Industry
Maintenance and repairs including installations
Utilities Power Generation
Product Rating:
SANS 434
SANS 1387-4
SANS 1423-1
ISO 6530 (HNO3, HCL, H2SO4 and NaOH)
Composition:
100% Cotton, 300/320gsm fabric
A flame retardant and coated acid-resistant fabric

Ram Baler Twine Polypropylene Ram Red 2X5Kg

Loctite 638 is intended for connecting cylindrical fitting pieces with bond gaps as small as 0.25 mm. When confined in the absence of air between close-fitting metal surfaces, the product cures and resists loosening and leakage caused by stress and vibration. It operates not only on active metals but also on passive substrates and has a strong cure performance. The product performs well at high temperatures, has exceptional oil tolerance, and can withstand small surface impurities.

LOCTITE 277 is a red, high strength, high viscosity, methacrylate-based thread locking adhesive. It has a fixture time on steel of 30 min, brass 25 min and stainless steel 270 min making it ideal for applications where migration of the adhesive must be prevented. Can tolerate slight contaminations of industrial oils. Suited to large threads. Fluoresces to allow monitoring.
LOCTITE 277 is designed for the permanent locking and sealing of threaded fasteners. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. Typical applications include the locking and sealing of large bolts and studs (M25 and larger).

Benefits:
High viscosity
Breakaway torque on M10 bolts of 32 Nm
Prevents unwanted movement, loosening, leaks and corrosion
Resists vibration
High strength
Suited to large threads

Maximum thread size: Up to M80
Strength: High
Breakaway torque M10 bolts: 32Nm
Service temperature range: -55 C - +150 C

Dromex denim jean pants have 2 front pockets, money pocket and 2 back pockets. All pockets have double needle top stitching
All topstitching is done in corn 36 cotton
YKK brass zip and Dromex close button
Dromex rivet and studs on all corners of front pockets
All stress points to be bar tacked
Hem allowance is at 1.5cm