THE POWR RANGE OF WATERPROOFING PRODUCTS ARE IDEAL FOR THE HARSH SOUTH AFRICAN CLIMATE.

POWR now provides you with all your high quality, eco-friendly, waterproofing products under one trusted brand.

Introducing our dynamic waterproofing range – the ultimate solution to protect your surfaces against moisture, leaks, and water damage. Our range of high-performance waterproofing solutions include POWR Rubber Seal, POWR Bonding Liquid, POWR Membranes and POWR Waterproofing Tapes. They are specially formulated to provide a reliable barrier against the elements, keeping your walls, floors, and structures waterproof and pristine. POWR Waterproofing products that offer both a variety of functional solutions and easy application.



PERFORMANCE BENEFITS:
•Bonds to most construction materials
•Elongates 100% with 95% recovery - Highly stretchable and contracts to its original form.
•Withstands thermal cycling
•Puncture resistant
•Strong UV exposure
•Withstands exposure to industrial chemicals
•Improves lifespan of coated substrates.
•Corrosion control.
•Encapsulation (Asbestos).
•Environmentally Friendly and can be applied were rainwater is harvested.
•Waterproofing that can withstand ponding of water.
•Can be applied to all construction materials
•Spray, paint or roller applied.
•Total ambient temperature application - No heating or propane flame heating required.
•Seals joints and covers fine cracks

PRODUCT USES:

•For all roof types/structures including:
•Fibre cement roof sheets
•Cement roof tiles
•Chromadek
•Zinc Alum and AluZinc
•Exterior trims such as facias, gutters, window sills and cement garden pots

APPLICATION:
•Always Mix POWR Rubber Seal well before use.
•Make sure all substrates are completely clean, sound, dry, and free from any laitance (a white film that forms on the surface of drying concrete), fungus, grease, oil, or loose and flaking particles.
•Do not dilute POWR Rubber Seal (application ready)
•Apply two coats by brush or roller
•A third coat is recommended for coastal areas.
•Determined by the condition, allow approximately an hour drying time between coats.
•Touch dry time is approximately 2 hours in hot dry conditions (25°C)


POWR WATERPROOFING MEMBRANE APPLICATION:
•Apply a generous coat of POWR Rubber Seal.
•Press membrane into wet POWR Rubber Seal surface.
•Apply a generous coat of POWR Rubber Seal over membrane until covered and allow to dry for 90 minutes
•Apply a final coat of POWR Rubber Seal over coated surfaces.


GALVANIZED METAL ROOF SHEETING APPLICATION:
Wash all fungi-infested areas and cracks with a Fungi Wash and leave for 24 hours to react. This will kill spores and limit fungal growth. Remove all loose flaking and powdery paint or surface laitance by pressure washing. Prime all rust-affected areas ( if any ) with Triple Red Rust Converter.



NEW METAL SURFACES:
Apply one coat of Anti Corrosion Metal Primer to entire surface and allow to dry for 2-3 hours before overcoating. The area must be overcoated within 24 hours to prevent a loss in adhesion. Apply two coats of POWR Rubber Seal (0.8kg - 1kg / m2)


WEATHERED METAL SURFACES:
Apply one coat of Anti Corrosion Metal Primer to entire surface and allow 2-3 hours drying time before overcoating. The area must be overcoated within 3 days to prevent a loss in adhesion. Apply two coats of POWR Rubber Seal ( 0.8kg - 1kg / m2)


PROBLEMATIC METAL AND BITUMEN SURFACES:
An Acid Metal Etch Primer is advisable to use as a substitute for Anti Corrosion Metal Primer under the following circumstances: Where flaking of factory-coated metal sheeting is observed. Over areas that were coated with bituminous products apply Bitumen Barrier Primer.


METAL AND CHROMADECK ROOF SHEETING:
Wash all fungi-infested areas with a Fungi Wash and leave for 24 hours to react. This will kill spores and limit fungal growth. Remove all loose flaking and powdery or surface laitance by pressure washing. Prime all rust-affected areas (if any) with Triple Red Rust Converter. Scour the entire surface with a scouring pad to promote adhesion of the subsequent coatings.
APPLICATION:
•Apply a coat of Anti Corrosion Metal Primer.
•Prime all areas (full primer) and allow to dry for +- 8 hours.
•Apply two coats of POWR Rubber Seal ( 0.8kg - 1kg /m)


ASBESTOS, NUTEC ROOF SHEETING AND CEMENT TILES:
Wash all fungi-infested areas with a Fungi Wash and leave for 24 hours to react. This will kill spores and limit fungal growth. Remove all loose, flaking and powdery or surface laitance by pressure washing. Prime all rust-affected areas (if any) with Triple Red Rust Converter.
Scour the entire surface with a scouring pad to promote adhesion of the subsequent coatings.
APPLICATION:
•Apply one coat of POWR Bonding Liquid to all areas (full primer), and allow to dry for +- 8 hours.
•Apply two coats of POWR Rubber Seal ( 0.8kg - 1kg/m2)


COVERAGE:
•Coverage will vary depending on the substrates/surface porosity.
•Coverage must be between 0.8kg - 1kg / m2


MAINTENANCE COAT:
To ensure warranty a maintenance coat must be applied every 3 - 4 years

WHAT MAKES IT UNIQUE:
•Spray or brush applied at ambient temperature
•Cures into a seamless membrane
•Excellent Waterproofing
•Corrosion resistance
•Chemical resistance
•Encapsulation


ROOF COVER APPLICATION:
•Waterproofing
•Encapsulating
•Rust Prevention
•Rust Rehabilitation
•Chemical protection

ROOF SURFACES:
•Metal Sheeted Roofs
•Tiled Roofs
•Asbestos / Nutech Roofs
•Concrete Slab Roofs


CLEAN UP:
Clean equipment with warm, soapy water


TRANSPORTING PAINT:
It is important to make sure that your paint products are properly and safely secured upright when transporting them.


SAFETY PRECAUTIONS:
•Keep out of reach of children.
•Read the label before use
•Ensure good ventilation during application and drying.
•In case of skin contact, wash with soap and water or a recognized skin cleaner. Avoid contact with eyes - in case of contact, rinse your eyes immediately with plenty of water and seek medical advice if symptoms persist. If ingested, drink plenty of water/milk. Do not induce vomiting. Seek medical attention.
•Store in a closed container.
•Store in a well-ventilated place.
•Keep cool.
•Dispose of contents/containers by local regulations
•Refer to safety data sheets and technical data sheets for further information

An auger drill bit is used to bore holes in timber. It is great for drilling holes in thatch poles to insert threaded rods.

The design is very similar to a forstner drill bit, as it "shaves" itself through the wood. A low rpm rotary drill with a planetary gearbox is required to be used with auger drill bits.

The Gunsmithing Set 89PC Screwdriving Set Professional is a comprehensive tool kit designed for gunsmithing and other precision work. Here's what it typically includes:

89 Pieces: The set contains a wide variety of tools, including a range of screwdriver bits, handles, and other accessories.
Screwdrivers & Bits: This set likely includes a selection of screwdrivers and driver bits in various sizes and shapes, specifically suited for working with firearms or other delicate, small components. This allows for precise and safe disassembly and assembly.
Professional Quality: The set is made with high-quality materials designed for professional use, ensuring durability and reliability during frequent or demanding tasks.
Versatility: While primarily intended for gunsmithing, the set can be used for a variety of other tasks, such as working on watches, small electronics, or other fine mechanics that require precision.
Ergonomic Handles: Often, these sets come with ergonomic handles designed for comfort during extended use, providing better control and reducing hand strain.
This Gunsmithing Screwdriving Set is ideal for professionals or hobbyists working on firearms or any task requiring precision and a variety of small driver tools. The 89 pieces offer a wide selection to cover various screw types and sizes.

Festool Abrasive Sheet Stf P320 Gr/50 Granat 497164 (80 x 400)

Flange Black FF Weld On Table D 300mm

A Y Connector FFF 1/2" is a fitting used to join three pipes or hoses in a Y-shaped configuration. The "FFF" designation typically refers to female threads on all three openings. The 1/2" size indicates the diameter of the pipe or hose connections. This type of connector is commonly used in plumbing, irrigation, or fluid systems to split or combine flows, offering a secure and leak-proof connection for different pipes or hoses.

The Action Set Pro KP25 is a high-quality toolset designed for a variety of professional applications. It typically includes a range of tools or components tailored for precision work, assembly, or maintenance. The set is known for its durability and performance, often suited for tasks in industries like construction, automotive, or DIY projects.

While specific contents can vary, it generally includes essential tools like drivers, wrenches, or accessories designed to work seamlessly together. The KP25 in the name likely refers to the set's model or a particular configuration, ensuring compatibility with various tasks requiring efficiency and reliability.

Circular Dies High Speed Steel
Size (mm): M3
Pitch: 0.5

Tork Craft Repl. Auxilary Handle (21) Service Kit (5 Pack)

King Tony Bit Torx Shank (4 Pack) (T40 x 32mm 5/16")

Festool Sanding Discs Granat 575155 Stf D150/48 P60 Gr/10

King Tony Phillips Bit #2 (8 Pack) (25mm)

King Tony Phillips Bit Reduced (8 Pack) (#2 x 25mm)

The Non-Return Valve 1/4M - 3/8M Viton is a check valve designed to allow fluid or gas to flow in one direction only, preventing backflow. It has a 1/4-inch male thread on one side and a 3/8-inch male thread on the other, making it suitable for use in various piping systems with these specific thread sizes. The valve is made with Viton, a high-performance synthetic rubber known for its resistance to heat, chemicals, and aging, ensuring durability and reliability in demanding industrial applications. This non-return valve is ideal for use in fluid, gas, or pneumatic systems where controlling flow direction is crucial.

The Filter for Spray Booth is designed to trap dust, fumes, and overspray in spray booth environments, ensuring a clean and safe workspace. It helps to maintain air quality by filtering out harmful particles from the air, protecting both workers and the equipment. These filters are typically made from highly absorbent materials such as fiberglass or polyester, designed for use in industrial spray booths or painting areas. They help improve the efficiency of air circulation and prevent contamination of the painted surfaces.

The Service Kit for TCV10125 includes essential replacement parts for maintaining the tool, specifically designed for a 125mm capacity. It contains jaws, a strap, a worm, and a handle, all of which are vital components for smooth operation and functionality. The jaws are used for gripping, the strap helps secure materials, the worm gear provides precise adjustments, and the handle ensures ease of use and control. This service kit is intended for those who need to replace or maintain these parts in the TCV10125 tool, helping to extend its lifespan and performance.

The Service Kit for TCV10100 includes essential replacement parts to maintain and restore functionality to the TCV10100 vise. The kit contains:

100mm Jaws – Ensures a firm and secure grip for various clamping applications.
Strap – Provides additional support and stability.
Worm Gear – Maintains smooth and precise movement.
Handle – Allows for easy operation and control.
This service kit is designed for longevity and performance, making it ideal for keeping your vise in optimal working condition.

Mitco Hss Red/S Drill Bit - 18mm

Bulk Pack x 2 Rockworth CompreSensor Regulator (All Sizes)

Tork Craft Blade Tct (190 x 40T) (30mm/20mm/16mm)

The Pica Fine Dry Refill Set Red - Blister Version (12) is a set of 12 high-quality refills for the Pica Fine Dry marker. These refills are designed for use with Pica dry markers, offering precise, fine lines in a vibrant red color. Ideal for marking and drawing on a variety of surfaces, these refills are perfect for professionals in industries like construction, carpentry, and design. The blister packaging ensures easy storage and organization, making it convenient for frequent use. Whether for precise markings on wood, metal, or other materials, these refills provide long-lasting performance.

The Pica Big Dry Refill Aniline All Weather Leads are specially designed refills for Pica Big Dry mechanical pencils. These leads are made with aniline, a dye-based material that allows for highly visible markings. The "all weather" feature makes them suitable for use in various conditions, such as on wet, oily, or dusty surfaces, providing reliable marks even in challenging environments. These refills are ideal for professionals and DIYers who need durable, clear markings for construction, woodworking, or other outdoor tasks where standard pencils may fail.

Flange Black FF Weld On Table D 125mm

The Pony Press Screw 12" is a clamping tool used primarily for woodworking and metalworking tasks. The 12" size refers to the length of the screw, which allows it to accommodate a variety of workpieces. This type of press screw is often used to apply pressure for holding materials in place while gluing, sawing, or drilling. The Pony Press is known for its durability and adjustable screw mechanism, making it an essential tool in workshops for clamping or holding heavy objects securely during work. It's ideal for precision tasks and small to medium-sized projects.

Alpen Profi Beton Concrete Drill Bit Set (8 Piece)