HD720 is the ultra durable external hard drive with a sporty design. It features a large storage capacity, and also undergoes stringent tests for waterproofing, dustproofing and shock resistance to provide excellent protection of data. The ADATA HD720 1TB/2TB External Hard Drive is the most rugged data backup for your next adventure!

Features:

IP68 Water and Dust Resistant Qualified
The HD720 has passed the stringent IP68 test, offering excellent water and dust resistant protection. Thanks to its durable design, the HD720 works normally even in a dusty environment or after being submerged in its storage state in 2 meter-deep water for up to 120 minutes.

Tougher Shock Test Qualified
The HD720 has passed a stricter 1.8m drop test than the standard military-grade (MIL-STD-810G 516.6) requirement. It is capable of handling the sudden crash.

Triple-Layer Protection
The triple-layer construction of the HD720 incorporates exceptionally elastic silicone material to provide great shock absorption from all angles.

Shock Sensor Protection
Shock Sensor Protection helps protect your data. If your HD720 suffers a severe shock from being struck, Shock Sensor Protection automatically starts up and displays a flashing red light. When the shock has passed, a solid or flashing blue light displays indicating normal operation has resumed.

Wrap-around USB Cable
The USB cable tucks into a wrap-around exterior groove in the drive casing, providing an elegant storage solution that matches the highly practical characteristics of the device.

The Capacity You Need
Did you run out of space to save the videos and photos when you went for your last adventure? The HD720 provides large storage capacities, allowing you to record every wonderful moment.

Introducing the Icy Dock ToughArmor MB608SP-B full metal 6 bay 2.5" SATA 6Gbps hard drive or SSD removable rugged drive enclosure for use in a single external 5.25" bay. The MB608SP-B is predicated off the incredibly popular ruggedized mobile rack ToughArmor MB996SP-6SB, while taking its general concept, but built with cost effective structure without sacrificing anything in the way of strength. For better compatibility, the original 4 pin power connector has been replaced with a more, popularly used, 15 pin SATA power connector, and reducing cable clutter. The MB608SP-B takes 6 x 2.5" SAS/SATA HDD/SSD from 5mm to 9.5mm height, and supports hot swap for quick and easy drive replacements. The single 40mm cooling fans has an additional 3-Mode Fan Speed control, allowing the best flexibility – Turn off / low when using SSD’s and high when using mechanical SATA hard drives. The MB608SP-B is constructed of rugged robust metal to survive the most demanding conditions making it a perfect storage upgrade kit for medical & military systems, embedded system, HPC (high performance c¬omputer) system and industrial PC. Industrial Construction Ready Ensuring drive protection and longevity are the foundation of a high-quality data storage system design/build. The MB608SP-B is capable of withstanding the harshest environments due to its rugged heavy duty full metal construction from the outer shell to the inner trays. The ToughArmor's full metal design is perfect for industrial and medical systems that may require a flammability rating as the full metal design is considered to already comply with most requirements. Versatile & Durable Drive Trays The MB608SP-B utilizes our EZ Slide Micro trays, making drive interchangeability and maintenance completely hassle free. The trays are built using rugged full metal so that they are durable for many lifetimes, but will not weigh you down when transporting your data from system to system. The EZ Slide Micro tray is featuring a full range drive protection design; the top drive cover provides added protection while moving the drive. The trays are designed to accommodate 5mm, 7mm & 9.5mm drives giving you the ultimate universal 2.5" SAS/SATA drive support with hot-swap function. Multifunctional Applications Utilizing its small form factor, the ToughArmor MB608SP-B is perfect for use in small form factor system or system that requires multiple drives with limited physical space. With its high density drive design and limited number of 5.25" drive bays available, it is a perfect combo to create a RAID 6 or RAID 10 systems with ease. Also, it is built to function in the most demanding environments including military and law enforcement deployment, as well as manufacturing conditions such as embedded control systems and factory automation systems. The full metal design makes it ideal for placement in tough environments. Absolute Control of your 2.5” hard drive or SSD Bringing more utility to your hard drives or SSDs, LED’s are installed into the front of the mobile rack to provide individual drive status information at all times. Active Power Technology (APT) allows each LED and the cooling fan to be active only when a hard drive is inserted into the enclosure. A high performance 40mm cooling fan is placed directly at the center of the rear panel, providing equivalent airflow throughout the entire cage. In addition, a 3-Mode Fan Speed Control has been added to be flexible in various situations, depending on your usage - you may need the fan to be at a higher speed, or completely off for silent operation. Never forget which drives belong in what bays. With our individual drive ID labels you’ll always know which drive tray belongs in your RAID array or which drive contains certain files. Freely unplug and rearrange them to better suit your configuration or simply remove them for a more simplified look. The ToughArmor MB608SP-B supports both 7-pin SATA data and 15-pin SATA power cables with locking latches so you’ll never need to worry about cables unintentionally disconnecting from your enclosure. Once these cables are connected, they’ll lock into place and stay that way.

The CORSAIR Obsidian Series 1000D is the ultimate super-tower PC case with iconic tempered glass design, smart lighting and fan control and the ability to house two systems simultaneously for the most epic builds.

THE ULTIMATE SUPER-TOWER PC CASE
Iconic and clean exterior lines, four smoked tempered glass panels and seamlessly integrated RGB lighting make the Obsidian 1000D the best-looking Obsidian Series case yet.

STREAM AND GAME SIMULTANEOUSLY
The Obsidian 1000D can fit both a complete E-ATX and Mini-ITX system concurrently, so you can stream and game smoothly from one enclosure. Two motherboards, two power supplies, two full PCs in one case.

MASSIVE COOLING OPTIONS
Up to 18 fan mounts* and room for up to four 480mm radiators simultaneously

BUILT-IN SMART LIGHTING AND FAN CONTROL
An integrated CORSAIR Commander PRO fan and lighting controller grants superior control over almost every aspect of your system via CORSAIR iCUE software.

TRIPLE-CHAMBER DESIGN
Keeping a 1000D PC build tidy is effortless with the included French-door-style rear storage compartment, E-ATX motherboard and dual-purpose Mini-ITX motherboard tray and PSU cover.

FUTURE-PROOF FRONT PANEL
An RGB LED lit front panel includes two USB 3.1 Gen-2 Type-C ports alongside four USB 3.0 ports, for future-proof and backward compatible connectivity.

BUILD IT BETTER
A rotatable GPU bracket for standard or vertical GPU mounting and a wealth of pump and reservoir fit points throughout the case make the 1000D the most flexible and modular CORSAIR case ever.

TELESCOPING RADIATOR TRAYS
Install fans and radiators effortlessly with smooth, tool-less modular radiator mounting trays.

SIZE MATTERS
The massive 1000D features storage space for up to five 3.5” HDDs and six 2.5” SSDs, each in their own dedicated compartments.

The CORSAIR Carbide Series 275R is a compact mid-tower ATX case that matches minimalist design and a beautiful edge-to-edge windowed side panel with a straightforward interior layout and versatile cooling options. MINIMALIST DESIGN, MAXIMUM FEATURES The CORSAIR Carbide Series 275R is a compact mid-tower ATX case that matches minimalist design and edge-to-edge window with a straightforward interior layout and versatile cooling options. FULL WINDOW SIDE PANEL Edge-to-Edge full window side panel shows off your system in style. CLEAN AND MINIMALIST DESIGN Clean lines, curved edges with soft accent lighting. BUILDER-FRIENDLY INTERNAL LAYOUT Simple and intuitive internal layout enables easy and quick building. VERSATILE COOLING OPTIONS Room for up to six 120mm fans, or up to a 360mm radiator in front, 240mm radiator at top, and 120mm radiator in the rear. EXPANSIVE STORAGE SPACE Rugged-construction steel drive trays provide ample room for additional SSDs and hard drives. BUILT-IN CABLE ROUTING Dedicated cable routing compartment enables effortlessly clean builds. DIRECT AIRFLOW PATH™ COOLING Two included CORSAIR SP120 fans ensure cool air is directed to the hottest components, without any interference from drive cages.

Color Customization
Replaceable corners mounted to anti-vibration rubber dampers allow you to match your fans with the rest of your build while delivering quiet operation at higher speeds

Color Customization
Replaceable corners mounted to anti-vibration rubber dampers allow you to match your fans with the rest of your build while delivering quiet operation at higher speeds

Color Customization
Replaceable corners mounted to anti-vibration rubber dampers allow you to match your fans with the rest of your build while delivering quiet operation at higher speeds

Beautifully Tempered

Beautifully simple and engineered to perform: the Crystal 460X has two-panel tempered glass, Direct Airflow cooling technology, is compact, expandable, and with three SP120 RGB fans, is not afraid of the spotlight.

Three SP120 RGB LED fans

Light up your build with brilliant LED effects and draw ample cool air directly to your components without the turbulence that can cause fan hum.

Freedom to Customize

We’ve engineered the Crystal 460X to pack all the performance and expandability you need into a beautifully modern and compact case design. Put your build on display through beautiful two-panel tempered glass and keep it all running cool and quiet with Direct Airflow technology.

Style Is Everything

Built into the chassis are three striking SP120 RGB fans. Make your build stand out from the crowd by coordinating the custom-molded translucent blades with your build for a sleek, brilliant look -- all visible through the tempered glass panels.

Compact design, full size capabilities

Don’t let the compact dimensions of the 460X fool you - it can house a full ATX motherboard and multiple GPUs.

Liquid cooling capable

With room for front, top, and rear radiators, you can choose to quiet down your GPU and CPU with liquid coolers just about wherever you want to.

Direct Airflow Path

Drive cages are moved up and out of the path of cool air from the front intake fans and high-temperature components.

PSU and 3.5” Bay Cover

Clean up the inside of your case by placing cables and drives behind two modular, clean, and refined PSU and 3.5” bay covers

Minimal setup

With tool-free drive installation and three-point dust filter access, the CORSAIR Crystal 460X is easy to build — and even easier to keep clean. You’ll spend less time on setup and maintenance, and more time enjoying your PC.

- Three SP120 RGB LED fans
- Freedom to Customize
- Style Is Everything
- Compact design, full size capabilities
- Liquid cooling capable
- Direct Airflow Path
- PSU and 3.5” Bay Cover

SIZE MATTERS FOR PERFORMANCE

Stay Cool, with Great Peformance
The PC-Q38 is designed to deliver the best performance in the smallest size. Able to pack large graphics cards, housing a 240mm radiator, and mount a Mini-ITX Motherboard, the PC-Q38 packs the biggest punch.

Fits Your Need
SFX or ATX? The choice is yours! The optional PSU mounting bracket converts from SFX to ATX for maximum flexibility.

Optimised Space
Despite its small size, the PC-Q38 can house a 260x50mm radiator besides space for 2.5" and 3.5". With the PC-Q38, you don't have to sacrifice options for cooling.

Windowed Side Panel
RGB cool, or regular cool? You can see it with the PC-Q38's side panel.

Easy to Clean
All panels are easily removable and can be easily cleaned.

Liquid Cooling Ready
Has space for a 240mm radiator and can house more components thanks to its spacious design.

Converts with Ease
The rubber-padded Aluminium feet convert the PC-Q38 from a tower to a desktop and back in no-time.

Classic HTPC Look, Modern Performance
The PC-Q38 might look like a classic HTPC, but it's optimised for all modern hardware delivering an extreme punch for its light weight.

A Symphony of Color The CORSAIR RGB LED Lighting PRO Expansion Kit provides individually addressable RGB LED lighting strips for stunning lighting effects and vivid PC illumination. Minimal Installation Four included magnet-backed lighting strips, with ten RGB LEDs per strip, make it easy to bring RGB lighting to your PC in minutes. Total RGB Control Combine with the CORSAIR Lighting Node PRO or Commander PRO and CORSAIR LINK software for full control over your case lighting right from your desktop. *Requires Lighting Node PRO or Commander PRO.

Allows you to cycle through lighting effects, effect speeds, and individual RGB LED colors.

Two-Piece Panoramic Tempered Glass
Fully Black / Fully White / Fully Pink Coated Interior Gaming Case
Front and Side Transparent Fish Tank with Ultra Cooling Design
Stealth Cable Management with Hidden Cable Routing
Supports Solid State Drives Integration
Accommodates up to 360mm Length Graphic Cards
Dedicated Liquid Cooling Radiator Bay

No more bland enclosures. Turn any 2.5” SSD or HDD into extra gaming storage with a design that pops out from the crowd. This is an enclosure for gamers, made fast, tough, and classy with tool-free install and instant plug n game

High speed cleans out lag
Dedicated controller maximizes USB 3.1/SATA 6Gb/s conversion efficiency

Fast SATA 6Gb/s and USB 3.1 in harmony
Install and load even the biggest games with no compromise: virtually identical to internal storage

Super easy tool-free install
Any 2.5” SSD/HDD takes literally minutes to install – no tools or screws needed

Secure lock and easy open
Flick the switch securely lock the EX500 and unlock it for quickly swapping drives

Detachable lock puts you in charge
Remove the lock mechanism and reinsert it as needed – you’re in control

Tough impact resistant wrap
Tested against drops from desktop height – your games will survive rough treatment

The PC-O10 is a streamlined and modern mid tower case. By adopting the SFX/SFX-L PSU form factor, this chassis has a much slimmer profile compared to its PC-O9 and PC-O8 cousins. Lian Li cut the proportions to match that of a conventional tower, while maintaining the attractive and functional half glass, half aluminum design. With power efficiency ever on the rise, and an increasing number of high-wattage SFX-L PSUs available, enthusiasts no longer need to encumber their cases with bulky traditional ATX PSUs.

In spite of its leaner dimensions, the PC-O10 still fits E-ATX and Full ATX as well as microATX motherboards. With seven expansion slots, it supports multi-GPU setups with VGA cards as large as 340mm: plenty of room for even the best gaming builds. It accommodates CPU coolers as tall as 130mm. The PSU compartment can store up to four 3.5” and two 2.5” drives, with space in the main glass compartment for an additional 2.5” SSD. The dual-compartment layout puts attractive components in the limelight, while keeping cables, drives, and other less desirable parts out of sight.

You can purchase the optional O10-1 accessory kit to show off a dual-slot VGA card vertically with a riser cable in the same manner as the PC-O7. The kit replaces the standard expansion slot covers. Showcase your top-end graphics card with a unique orientation!

The bottom panel has mounts for two 120mm or one 140mm intake fan, with space for two 120mm outtake fans on the top panel. The back panel can additionally mount two 80mm fans. You can instead opt to install a 240mm radiator fitting 320mm x 120mm x 90mm on the top panel.

The PC-O10 includes two USB 3.0 and HD audio ports on its front panel. All of its fan mounts include removable, washable mesh filters to keep the case dust free. Water cooling enthusiasts will appreciate a removable, dedicated pump plate in the glass compartment with grommeted pass-throughs between compartments for elaborate custom loops.

The PC-Q37 boasts beautiful tempered glass and brushed aluminum panels. Adopting the latest SFX-L PSU standard, the PC-Q37 has slimmer proportions than our previous dual-chambered cases: a mini tower rather than a cube chassis. This makes a beautiful showcase for high-end PC builds without taking up too much deskspace.

Like its big brothers the PC-O9 and PC-O10, the PC-Q37 is split into two compartments to make tidy builds a breeze. The main compartment mounts the motherboard, expansion cards, and cooling equipment; the back compartment hides the PSU and drive racks. This layout allows builders to highlight their best bits with oversized tempered glass, while effortlessly keeping wires and unsightly components tucked away.

The PC-Q37 is a mini tower supporting Mini-ITX motherboards. Despite its compact size, it accommodates the largest VGA cards as long as 310mm on its two expansion slots. Users can install CPU coolers up to 120mm tall and PSUs as long as 220mm. The main compartment can house up to four 120mm fans on the top and bottom panels for an efficient bottom-to-top airflow or, alternatively, a radiator fitting 300mm x 120mm x 80mm. Why have big beautiful sheets of glass if there’s nothing exciting to show inside?

The back compartment hides a rubber vibration-dampening drive rack supporting one 2.5” and two 3.5” drives. The front IO panel includes two USB 3.0 and HD audio ports, with headers tucked aside in the PSU and drive compartment, keeping the main compartment unfettered and wire-free at the get-go. Like the O-series, the PC-Q37 features an all-aluminum and tempered glass construction with removable, washable mesh filters on the fan intake mounts.

Clearly Superior With immaculate tempered glass enclosing the entire chassis, every component of your build is on display for all to see, including three vivid SP120 RGB LED fans and a built-in LED controller. The Final Frontier Room for up to 6 case fans, and fully compatible with 360mm, 280mm, and 120mm radiators. Removable fan trays in the front and top of the chassis allows for additional space or mounting cooling outside of the chassis. Four-panel tempered glass on every side of the case Possibly the most beautiful case CORSAIR has ever made. With tempered glass enclosing the entire chassis, every component of your build is on display for all to see. Direct airflow path to keep your CPU and GPU running cooler Light up your build with brilliant LED effects. Three included SP120 RGB LED fans and included LED controller keeps your components running cool. Room for practically anything Create as much space as you want with room for up to 6 case fans, virtually every size radiator or by removing fan trays. Cable management made simple Cable routing channels with included velcro cable straps for clean cable management. Direct Airflow Path Drive cages are moved up and out of the path of cool air from the front intake fans and high-temperature components. Minimal setup With tool-free drive installation and three-point dust filter access, the CORSAIR Crystal 570X is easy to build — and even easier to keep clean. You’l l spend less time on setup and maintenance, and more time enjoying your PC.

Two Compartment Design

The PC-O8 features a two compartment design,separate the system into two compartments, one is motherboard and graphics card section, another one is 3.5″ HDD and power supply unit section.

Modular HDD Rack

HDD rack can support six 3.5″ drives and two 2.5″ drives.

LED RGB Color Changing Kit (LED50RGB-2)

Complete kit including waterproof LED strip, cord clip, dimmer and controller.

Water Cooler Support

The PC-O8 is designed to support the majority of commercially available integrated water coolers.

Maximum Capability

VGA Card length: 370mm / PSU length: 298mm / CPU cooler height: 170mm

With the 2.5” solid state drive prices dropping and their capacity increasing, there are more and more computer users starting to upgrade their hard disk drive to SSD. If you are computer literate, you may have more than one 2.5” SSD installed in your system. Since every computer has limited hard drive slots, what will happen if you are running out of storage space but at the same time your system is out of physical drive slots for adding more drives? The ICY DOCK Flex-Fit Quattro MB344SP HDD / SSD bracket is your answer. The Flex-Fit Quattro takes up to 4 x 2.5” HDD / SSD and only uses 1 x external 5.25” bay. The space saving design allows you to optimize your storage density and free up your valuable hard drive slots. With a tool-less drive installation design, the Flex-Fit Quattro lets you to easily insert or remove the HDD / SSD without dismounting the entire bracket from the system. This is extremely useful when adding additional HDDs / SSDs to your system, simply open the side panel of the PC case; insert the new HDD / SSD into the bracket and then plug in the cables and you are ready to go! Effortless Installation The Flex-Fit Quattro MB344SP is our most advanced quad 2.5” HDD / SSD bracket and we’ve designed this unit to be both user-friendly and highly flexible. The Flex-Fit Quattro MB344SP accepts up to 4 x 2.5” SATA HDD / SSD drive from 7mm to 9.5mm in drive height, which uses a completely new tool-less drive installation design with an advanced drive stabilizer system to simplify our drive installation process –all you need to do is insert the drive, and push inwards until an audible “click” is heard to indicate that the drive is securely installed. The drive stabilizer kits will automatically conform to different drive height and adjust the drives in place while providing full access to the drive. Lastly, the easy to access drive eject button allows for quick hard drive swapping in a matter of seconds without removing the entire bracket from the chassis. The best part about this bracket is it’s completely tool-less drive installation –just insert the drive and you’re set. It does not get any easier. Better Organization, Better Productivity With MB344SP’s high drive density design, you can put up to 4 x 2.5” HDD / SSD altogether in a single 5.25” bay for better cable management and system cooling performance. To install the Flex-Fit Quattro, simply remove the 5.25” drive bay cover, insert the Flex-Fit Quattro into the 5.25” bay and secure it with four screws. Finally, install the 5.25” bay cover back to the computer case and it is ready to use! On top of that, the Flex-Fit Quattro MB344SP can be used as an external drive organizing rack, with the option to stack multiple brackets on top of each other to create a cost-effective storage tower. This is extremely handy for people who have large collections of 2.5” drives such as media professionals. Beautifully Crafted Design Our Flex-Fit Quattro MB344SP is constructed with highly robust ABS plastic and fuses desirable traits such as durability and light weight. Using a sturdy plastic open frame design provides excellent durability and passive cooling factor which as a result, reduces the chances of mechanical failures while using the bracket. The open air frame design allows the drives to be cooled by the internal fans in your chassis. Along with our skeletal design, the Flex-Fit Quattro allows airflow in all the crucial areas of the drive which helps the drive's performance. Suggested Applications Any system with external 5.25” bay Key Features - Fits 4 x 2.5” SATA HDD / SSD into a single extermal 5.25” bay - Compatible with 2.5” HDD / SSD with 7mm to 9.5mm drive height - Tool-less drive installation design with advanced drive stabilizer system - Compatible with any standard external 5.25” bay - Open frame design for maximum passive cooling - Option to be used as a stackable drive organizing rack

Two Compartment Design The PC-O8 features a two compartment design,separate the system into two compartments, one is motherboard and graphics card section, another one is 3.5″ HDD and power supply unit section. - Cover Vents. - Exhaust fan. - 120mm Fan x2 (in the HDD Rack). - 120mm Fan x3 (Front). - Air Filter(Side). - Air Filter(Top). Modular HDD Rack HDD rack can support six 3.5″ drives and two 2.5″ drives. LED RGB Color Changing Kit (LED50RGB-2) Complete kit including waterproof LED strip, cord clip, dimmer and controller. Water Cooler Support The PC-O8 is designed to support the majority of commercially available integrated water coolers. Maximum Capability VGA Card length: 370mm / PSU length: 298mm / CPU cooler height: 170mm.

Exquisitely Modest Aesthetic Design The IN WIN team presents the 303, a simple, yet elegant computer chassis crafted from steel and tempered glass. The distinctively clean front panel is complemented with a bright LED design to balance the overall appearance. Radiant Luminosity The IN WIN logo is highlighted “Neon” as well as the lucent stripped I/O front panel. These gorgeous LEDs also have the purpose of indicating when the PC is activated. Accelerated Tool-less Design In Win has set a standard for being an innovative computer hardware company. Mission accomplished with the 303 since it has perfected a tool-less design by being able to remove the beautiful 3mm tempered glass side panel by just pressing the handle. User Friendly Dust Filter This easily accessible dust filter has an embedded design for quick removal. It’s conveniently located on the bottom, and removing dust has never been easier. Overall, the 303 can accommodate two radiators (top and rear) and three fans at the bottom providing users with a well-cooled rig. The cool air intakes from the bottom creates efficient air flow for quick heat dissipation. In Win's Attention to Detail The 303 is constructed with 1.2mm SECC, supports 2.5”and3.5” drive bays, and its separate PSU chamber provides an ideal climate without interfering with the motherboard and graphics card area. The specialized GPU holder can provide extra support to graphics cards. Yet another detail IN WIN oversees and manufactures to make PC building much easier.

Two Compartment Design
The PC-O9 features a two compartment design,separate the system into two compartments, one is motherboard and graphics card section, another one is 3.5″ HDD and power supply unit section.

Modular HDD Rack
HDD rack can support six 3.5″ drives and two 2.5″ drives.

LED RGB Color Changing Kit
Complete kit including waterproof LED strip, cord clip, dimmer and controller.

Water Cooler Support
The PC-O9 is designed to support the majority of commercially available integrated water coolers.

Maximum Capability
VGA Card length: 290mm / PSU length: 290mm / CPU cooler height: 160mm

Two Compartment Design
The PC-O9 features a two compartment design,separate the system into two compartments, one is motherboard and graphics card section, another one is 3.5″ HDD and power supply unit section.

Modular HDD Rack
HDD rack can support six 3.5″ drives and two 2.5″ drives.

LED RGB Color Changing Kit
Complete kit including waterproof LED strip, cord clip, dimmer and controller.

Water Cooler Support
The PC-O9 is designed to support the majority of commercially available integrated water coolers.

Maximum Capability
VGA Card length: 290mm / PSU length: 290mm / CPU cooler height: 160mm

Cool, Clear, and Compact.
We’ve engineered the Carbide Clear 400C to pack all the performance and expandability you need into a beautifully compact case design. Put your components on display through the gorgeous, full-size window panel that opens with a touch — and keep it all running cool and quiet with Direct Airflow technology.

Easy to build, hard to beat
With a one-touch side panel, tool-free drive installation, and three-point dust filter access, 400C is easy to build and even easier to keep clean. You’ll spend less time on setup and maintenance, and more time enjoying your PC.

Hinged and latched full side panel window
Easily access your components with a single touch – and when it’s closed, enjoy viewing every part of your build through the full side panel window.

Clean, modern lines with an all steel exterior
Get rid of those plastic cases – the 400C has full steel front and top panels for extra durability and gorgeous good looks.

Direct Airflow Path
One way to reduce noise is to make sure your fans don’t work harder than they have to. By removing the drive cages behind the intake fans, we provide a more efficient direct airflow path to your hottest components, the CPU and GPU. It’s just a smarter design.

Compact design, full size capabilities
Don’t let the compact dimensions of the 400C fool you. It can house a full ATX motherboard and multiple GPUs.

Liquid cooling capable
With room for up to a 360mm radiator in front, a 240mm radiator on top, and a 120mm radiator in rear, you can choose to quiet down your GPU and CPU with liquid coolers just about wherever you want to.

Two included AF series fans
Great airflow doesn’t have to be noisy -- the AF120L and AF140L fans can push good amounts of air across your hottest devices without that annoying fan hum, and the direct airflow design of the 400C provides an excellent path for cold air to get to your hottest parts.

PSU and 3.5” Bay Cover
Clean up the inside of your case by tucking all those cables and less-attractive drives behind two modular, clean, and refined PSU and 3.5” bay covers. Or remove them for assembly – it’s up to you.

Easy to clean
Easily access dust filters on front, top, and bottom mean you’ll never spend more than a minute getting dust out of your system.

Exquisitely Modest Aesthetic Design The IN WIN team presents the 303, a simple, yet elegant computer chassis crafted from steel and tempered glass. The distinctively clean front panel is complemented with a bright LED design to balance the overall appearance. Radiant Luminosity The IN WIN logo is highlighted “Neon” as well as the lucent stripped I/O front panel. These gorgeous LEDs also have the purpose of indicating when the PC is activated. Accelerated Tool-less Design In Win has set a standard for being an innovative computer hardware company. Mission accomplished with the 303 since it has perfected a tool-less design by being able to remove the beautiful 3mm tempered glass side panel by just pressing the handle. User Friendly Dust Filter This easily accessible dust filter has an embedded design for quick removal. It’s conveniently located on the bottom, and removing dust has never been easier. Overall, the 303 can accommodate two radiators (top and rear) and three fans at the bottom providing users with a well-cooled rig. The cool air intakes from the bottom creates efficient air flow for quick heat dissipation. In Win's Attention to Detail The 303 is constructed with 1.2mm SECC, supports 2.5”and3.5” drive bays, and its separate PSU chamber provides an ideal climate without interfering with the motherboard and graphics card area. The specialized GPU holder can provide extra support to graphics cards. Yet another detail IN WIN oversees and manufactures to make PC building much easier.

Two Compartment Design
The PC-O8 features a two compartment design,separate the system into two compartments, one is motherboard and graphics card section, another one is 3.5″ HDD and power supply unit section.

Water Cooler Support
The PC-O8 is designed to support the majority of commercially available integrated water coolers.

Maximum Capability
VGA Card length: 370mm / PSU length: 298mm / CPU cooler height: 170mm