With the 2.5” solid state drive prices dropping and their capacity increasing, there are more and more computer users starting to upgrade their hard disk drive to SSD. If you are computer literate, you may have more than one 2.5” SSD installed in your system. Since every computer has limited hard drive slots, what will happen if you are running out of storage space but at the same time your system is out of physical drive slots for adding more drives? The ICY DOCK Flex-Fit Quattro MB344SP HDD / SSD bracket is your answer. The Flex-Fit Quattro takes up to 4 x 2.5” HDD / SSD and only uses 1 x external 5.25” bay. The space saving design allows you to optimize your storage density and free up your valuable hard drive slots. With a tool-less drive installation design, the Flex-Fit Quattro lets you to easily insert or remove the HDD / SSD without dismounting the entire bracket from the system. This is extremely useful when adding additional HDDs / SSDs to your system, simply open the side panel of the PC case; insert the new HDD / SSD into the bracket and then plug in the cables and you are ready to go! Effortless Installation The Flex-Fit Quattro MB344SP is our most advanced quad 2.5” HDD / SSD bracket and we’ve designed this unit to be both user-friendly and highly flexible. The Flex-Fit Quattro MB344SP accepts up to 4 x 2.5” SATA HDD / SSD drive from 7mm to 9.5mm in drive height, which uses a completely new tool-less drive installation design with an advanced drive stabilizer system to simplify our drive installation process –all you need to do is insert the drive, and push inwards until an audible “click” is heard to indicate that the drive is securely installed. The drive stabilizer kits will automatically conform to different drive height and adjust the drives in place while providing full access to the drive. Lastly, the easy to access drive eject button allows for quick hard drive swapping in a matter of seconds without removing the entire bracket from the chassis. The best part about this bracket is it’s completely tool-less drive installation –just insert the drive and you’re set. It does not get any easier. Better Organization, Better Productivity With MB344SP’s high drive density design, you can put up to 4 x 2.5” HDD / SSD altogether in a single 5.25” bay for better cable management and system cooling performance. To install the Flex-Fit Quattro, simply remove the 5.25” drive bay cover, insert the Flex-Fit Quattro into the 5.25” bay and secure it with four screws. Finally, install the 5.25” bay cover back to the computer case and it is ready to use! On top of that, the Flex-Fit Quattro MB344SP can be used as an external drive organizing rack, with the option to stack multiple brackets on top of each other to create a cost-effective storage tower. This is extremely handy for people who have large collections of 2.5” drives such as media professionals. Beautifully Crafted Design Our Flex-Fit Quattro MB344SP is constructed with highly robust ABS plastic and fuses desirable traits such as durability and light weight. Using a sturdy plastic open frame design provides excellent durability and passive cooling factor which as a result, reduces the chances of mechanical failures while using the bracket. The open air frame design allows the drives to be cooled by the internal fans in your chassis. Along with our skeletal design, the Flex-Fit Quattro allows airflow in all the crucial areas of the drive which helps the drive's performance. Suggested Applications Any system with external 5.25” bay Key Features - Fits 4 x 2.5” SATA HDD / SSD into a single extermal 5.25” bay - Compatible with 2.5” HDD / SSD with 7mm to 9.5mm drive height - Tool-less drive installation design with advanced drive stabilizer system - Compatible with any standard external 5.25” bay - Open frame design for maximum passive cooling - Option to be used as a stackable drive organizing rack

Two Compartment Design The PC-O8 features a two compartment design,separate the system into two compartments, one is motherboard and graphics card section, another one is 3.5″ HDD and power supply unit section. - Cover Vents. - Exhaust fan. - 120mm Fan x2 (in the HDD Rack). - 120mm Fan x3 (Front). - Air Filter(Side). - Air Filter(Top). Modular HDD Rack HDD rack can support six 3.5″ drives and two 2.5″ drives. LED RGB Color Changing Kit (LED50RGB-2) Complete kit including waterproof LED strip, cord clip, dimmer and controller. Water Cooler Support The PC-O8 is designed to support the majority of commercially available integrated water coolers. Maximum Capability VGA Card length: 370mm / PSU length: 298mm / CPU cooler height: 170mm.

Exquisitely Modest Aesthetic Design The IN WIN team presents the 303, a simple, yet elegant computer chassis crafted from steel and tempered glass. The distinctively clean front panel is complemented with a bright LED design to balance the overall appearance. Radiant Luminosity The IN WIN logo is highlighted “Neon” as well as the lucent stripped I/O front panel. These gorgeous LEDs also have the purpose of indicating when the PC is activated. Accelerated Tool-less Design In Win has set a standard for being an innovative computer hardware company. Mission accomplished with the 303 since it has perfected a tool-less design by being able to remove the beautiful 3mm tempered glass side panel by just pressing the handle. User Friendly Dust Filter This easily accessible dust filter has an embedded design for quick removal. It’s conveniently located on the bottom, and removing dust has never been easier. Overall, the 303 can accommodate two radiators (top and rear) and three fans at the bottom providing users with a well-cooled rig. The cool air intakes from the bottom creates efficient air flow for quick heat dissipation. In Win's Attention to Detail The 303 is constructed with 1.2mm SECC, supports 2.5”and3.5” drive bays, and its separate PSU chamber provides an ideal climate without interfering with the motherboard and graphics card area. The specialized GPU holder can provide extra support to graphics cards. Yet another detail IN WIN oversees and manufactures to make PC building much easier.

Two Compartment Design
The PC-O9 features a two compartment design,separate the system into two compartments, one is motherboard and graphics card section, another one is 3.5″ HDD and power supply unit section.

Modular HDD Rack
HDD rack can support six 3.5″ drives and two 2.5″ drives.

LED RGB Color Changing Kit
Complete kit including waterproof LED strip, cord clip, dimmer and controller.

Water Cooler Support
The PC-O9 is designed to support the majority of commercially available integrated water coolers.

Maximum Capability
VGA Card length: 290mm / PSU length: 290mm / CPU cooler height: 160mm

Two Compartment Design
The PC-O9 features a two compartment design,separate the system into two compartments, one is motherboard and graphics card section, another one is 3.5″ HDD and power supply unit section.

Modular HDD Rack
HDD rack can support six 3.5″ drives and two 2.5″ drives.

LED RGB Color Changing Kit
Complete kit including waterproof LED strip, cord clip, dimmer and controller.

Water Cooler Support
The PC-O9 is designed to support the majority of commercially available integrated water coolers.

Maximum Capability
VGA Card length: 290mm / PSU length: 290mm / CPU cooler height: 160mm

Cool, Clear, and Compact.
We’ve engineered the Carbide Clear 400C to pack all the performance and expandability you need into a beautifully compact case design. Put your components on display through the gorgeous, full-size window panel that opens with a touch — and keep it all running cool and quiet with Direct Airflow technology.

Easy to build, hard to beat
With a one-touch side panel, tool-free drive installation, and three-point dust filter access, 400C is easy to build and even easier to keep clean. You’ll spend less time on setup and maintenance, and more time enjoying your PC.

Hinged and latched full side panel window
Easily access your components with a single touch – and when it’s closed, enjoy viewing every part of your build through the full side panel window.

Clean, modern lines with an all steel exterior
Get rid of those plastic cases – the 400C has full steel front and top panels for extra durability and gorgeous good looks.

Direct Airflow Path
One way to reduce noise is to make sure your fans don’t work harder than they have to. By removing the drive cages behind the intake fans, we provide a more efficient direct airflow path to your hottest components, the CPU and GPU. It’s just a smarter design.

Compact design, full size capabilities
Don’t let the compact dimensions of the 400C fool you. It can house a full ATX motherboard and multiple GPUs.

Liquid cooling capable
With room for up to a 360mm radiator in front, a 240mm radiator on top, and a 120mm radiator in rear, you can choose to quiet down your GPU and CPU with liquid coolers just about wherever you want to.

Two included AF series fans
Great airflow doesn’t have to be noisy -- the AF120L and AF140L fans can push good amounts of air across your hottest devices without that annoying fan hum, and the direct airflow design of the 400C provides an excellent path for cold air to get to your hottest parts.

PSU and 3.5” Bay Cover
Clean up the inside of your case by tucking all those cables and less-attractive drives behind two modular, clean, and refined PSU and 3.5” bay covers. Or remove them for assembly – it’s up to you.

Easy to clean
Easily access dust filters on front, top, and bottom mean you’ll never spend more than a minute getting dust out of your system.

Exquisitely Modest Aesthetic Design The IN WIN team presents the 303, a simple, yet elegant computer chassis crafted from steel and tempered glass. The distinctively clean front panel is complemented with a bright LED design to balance the overall appearance. Radiant Luminosity The IN WIN logo is highlighted “Neon” as well as the lucent stripped I/O front panel. These gorgeous LEDs also have the purpose of indicating when the PC is activated. Accelerated Tool-less Design In Win has set a standard for being an innovative computer hardware company. Mission accomplished with the 303 since it has perfected a tool-less design by being able to remove the beautiful 3mm tempered glass side panel by just pressing the handle. User Friendly Dust Filter This easily accessible dust filter has an embedded design for quick removal. It’s conveniently located on the bottom, and removing dust has never been easier. Overall, the 303 can accommodate two radiators (top and rear) and three fans at the bottom providing users with a well-cooled rig. The cool air intakes from the bottom creates efficient air flow for quick heat dissipation. In Win's Attention to Detail The 303 is constructed with 1.2mm SECC, supports 2.5”and3.5” drive bays, and its separate PSU chamber provides an ideal climate without interfering with the motherboard and graphics card area. The specialized GPU holder can provide extra support to graphics cards. Yet another detail IN WIN oversees and manufactures to make PC building much easier.

Two Compartment Design
The PC-O8 features a two compartment design,separate the system into two compartments, one is motherboard and graphics card section, another one is 3.5″ HDD and power supply unit section.

Water Cooler Support
The PC-O8 is designed to support the majority of commercially available integrated water coolers.

Maximum Capability
VGA Card length: 370mm / PSU length: 298mm / CPU cooler height: 170mm

Thermal Flow
Intake the cool air through the front two 120mm cooling fans.

Module HDD Rack

Maximum Compatibility
Expansion Card length: 410mm / CPU cooler height: 160mm / PSU length: 210mm.

Support Liquid cooling kit and Fan
Radiator (120mm x 120mm or 120mm x 240mm or 120mm x 360mm) or 120mm Fan.

- Case Stand.
- USB3.0.
- Vented PCI Bracket.
- Air filter (bottom).
- Cable holes.
- Air filter(Top).

Thermal Flow
Intake the cool air through the front two 120mm cooling fans.

Maximum Compatibility
Expansion Card length: 410mm / CPU cooler height: 160mm / PSU length: 210mm

Thermal Flow
Intake the cool air through the front two 120mm fans, and exhaust the hot air out by the rear 120mm fan.

New Tool-less HDD Tray System
Hard disk installation is quick and easy.
Supports four 3.5” or 2.5” HDDs.
The HDD tray can be removed to make more room for high-end graphics cards.

Compatibility
Graphics card length: 250mm – 370mm(Max) / PSU length: 270mm / CPU cooler height:170mm /
Radiator:(Front)120mm x 240mm x 60mm / Cable Management Space: 14mm~27mm

As generation progresses, more and more advanced computer technologies are constantly improving. These improvements include maximizing enhanced functions in smaller and compact packages. This is why 2.5” solid state drives and hard drives are becoming more popular due to its low power consumption and space-saving benefits, which are superior to 3.5” SATA hard drives in almost every category. Combine with the extra bandwidth of the SSDs and the raw power of the processors; enterprises are able to accelerate their project-development process more efficiently. Since 2.5” SSDs and HDDs have smaller storage capacities compared to 3.5” hard drives, maximizing the storage density in limited spaces have become the most important task for many storage consulting firms; a task they often encounters. The ToughArmor MB993SK-B is designed specifically for systems with storage space limitations by fitting 3 x 2.5” SSD / HDD into a single external 3.5” drive bay, maximizing the entire space of external 3.5” drive bay. On top of that, the MB993SK-B is built with heavy duty full metal construction which is commercially suitable for medical & military systems, government agencies, Industrial PCs, SMB workstations, VM workstations, mobile DVR systems, aerospace computers, automation systems and embedded systems.

Multi-Heat Zone Design
PC-X510 has multi zone design to bring better thermal solution and organize the internal space.

HDD bay
- Dual HDD tray:A HDD tray with two drive bays,each drive bay allows for either 2.5″ or 3.5″ drives.
- Two drive bays。
- The HDD tray can be removed to make more room for Liquid cooling kit.

Maximum Compatibility
CPU cooler height：180mm / PSU length：245mm / Expansion Card length：3 30mm

Support Liquid cooling kit and Fan
Radiator (120mm x 120mm or 120mm x 240mm) or 120mm Fan。
(PC-X510 does not include radiator and fan)

The manufacturer Lian Li, known for its extremely high-quality, handcrafted aluminum body, present the new side panel W-V1010. It is terrific opportunity to expand your Lian Li case with a very elegant and perfectly matched side window.

- Material: Aluminum

Mobility & Transport PC-TU300 has a rugged design. The flip handle makes for easy transport. Thermal Solution There are two top 120mm and one rear 120mm fan keep hot air from damaging hardware. Hot swap HDD Cage Hot-swap HDD cage, supports 3.5″ x2 and 2.5″ x1 HDDs. Simple Installation Simply push the lever to release the side panel.No tools needed. Maximum Compatibility VGA Card length: 300mm / CPU cooler height: 160mm / PSU length: 180mm - Liquid cooling openings - Filter(Bottom) - Two 2.5″ HDD bay in the bottom. - Slim CD-ROM drive - Filter(Top) - PCI bracket - USB3.0 x2

Mobility & Transport PC-TU300 has a rugged design. The flip handle makes for easy transport. Thermal Solution There are two top 120mm and one rear 120mm fan keep hot air from damaging hardware. Hot swap HDD Cage Hot-swap HDD cage, supports 3.5″ x2 and 2.5″ x1 HDDs. Simple Installation Simply push the lever to release the side panel.No tools needed. Maximum Compatibility VGA Card length: 300mm / CPU cooler height: 160mm / PSU length: 180mm - Liquid cooling openings - Filter(Bottom) - Two 2.5″ HDD bay in the bottom. - Slim CD-ROM drive - Filter(Top) - PCI bracket - USB3.0 x2

Every year, technology is becoming more and more advanced and is constantly improving. These improvements includes improve enhanced functions in smaller and smaller packages. This is why 2.5” solid state drives and hard drives are becoming more popular due to its low power consumption and space-saving benefits, which are superior to 3.5” SATA hard drives in almost every category. Combine with the extra bandwidth of the SSDs and the raw power of the processors; enterprises are able to accelerate their project-development process. Since 2.5” SSDs and HDDs have smaller storage capacities compared to 3.5” hard drives, maximizing the storage density in limited spaces have become the most important task for many storage consulting firms; a task they are faced with often. The ToughArmor MB992SKR-B is designed specifically for systems with space limitations by fitting 2 x 2.5” SSD / HDD into a single 3.5” external bay. With its built-in high performance hardware RAID processor, the MB992SKR-B gives users the option to choose between RAID 0, RAID 1, BIG and JBOD modes. The built-in RAID function allows you effortlessly add a 2.5” SSD/HDD RAID array to any system without needing to add a RAID controller card. The MB992SKR features a heavy duty full metal construction which is commercially suitable for medical & military systems, government agencies, Industrial PCs, SMB workstations, VM workstations, mobile DVR systems, aerospace computers, automation systems and embedded systems.

Impressively Detailed Craftsmanship 909 is constructed with solid materials, and its chamfered edge design and sleek anodized aluminium are beautifully crafted to masterfully create a streamlined and smooth enclosure inside/out. Simplicity in Design 909 features a single piece 4mm brushed aluminium shell and an elegant back panel that hides unnecessary rear I/O cables. The clutter-free design demonstrates the elegant aesthetics of simplicity. Tempered Glass Side Panels The side panels are finished entirely out of 5mm tinted tempered glass which reveals the internal LED light, and overall enhances the 909 into a truly modern and dynamic appearance. USB 3.1 TYPE-C 909 is equipped with one all-new reversible USB3.1 TYPE-C port for ultimate speed transfers up to 10Gb/s which is twice as fast USB3.0. Magnetic Aluminium Dust Filter The front intake fan dust filter has an embedded magnet design for easy removal creating a convenient installation and more importantly excellent dust reduction Elegant Lighting Effects A high-quality chassis should look beautiful when powered on and with the 909 it has a white LED strip creating various lighting effects to illuminate the PC interior beautifully highlighting the interior components Unique HDD & PSU Chamber Design The separate HDD and PSU chambers provide an ideal thermal environment by allowing heat airflow to dissipate directly to the back venting holes without interfering with the motherboard and graphic card area, and significantly improving the ventilation.

Thermal Flow
Intake the cool air through the front two 120mm cooling fans, and exhaust the hot air out by the top 140mm fan.

HDD rack
Up to three 3.5″ drives and one 2.5″ drives.
HDD rack can be removed to make more room for the high-end graphics cards.
When you remove the HDD rack, the back can mount two 3.5″ drives or 3.5″ , 2.5″ drives for each one.

Compatibility
VGA Card length: 285(410)mm / CPU cooler height: 160mm / PSU length: 160mm

Support Integrated Water Cooler
PC-18 designed to support the majority of commercially available integrated watercooler.
Side fan bracket,two 140mm or 120mm fans or radiator.

Thermal Flow
Intake the cool air through the front two 120mm cooling fans, and exhaust the hot air out by the top 140mm fan.

HDD rack
Up to three 3.5″ drives and one 2.5″ drives.
HDD rack can be removed to make more room for the high-end graphics cards.
When you remove the HDD rack, the back can mount two 3.5″ drives or 3.5″ , 2.5″ drives for each one.

Compatibility
VGA Card length: 285(410)mm / CPU cooler height: 160mm / PSU length: 160mm

Support Integrated Water Cooler
PC-18 designed to support the majority of commercially available integrated watercooler.
Side fan bracket,two 140mm or 120mm fans or radiator.

Two Compartment Design
The PC-O8 features a two compartment design,separate the system into two compartments, one is motherboard and graphics card section, another one is 3.5″ HDD and power supply unit section.

Modular HDD Rack
HDD rack can support six 3.5″ drives and two 2.5″ drives.

LED RGB Color Changing Kit (LED50RGB-2)
Complete kit including waterproof LED strip, cord clip, dimmer and controller.

Water Cooler Support
The PC-O8 is designed to support the majority of commercially available integrated water coolers.

Maximum Capability
VGA Card length: 370mm / PSU length: 298mm / CPU cooler height: 170mm

Thermaltake new Versa H15 micro case is ideal for home-computer builders and gamers, creating enough space for high-end hardware and expansion. The ample ventilation options, cleanable air filter, and a perforated mesh bezel help to keep the entire system cool and dust-free. Versa H15 combines a manageable frame size with extensive options to customize user’s computer or gaming system.

Dual System Support
The PC-D666 features a two compartment design.
Left(system 1) : Motherboard E-ATX ,ATX ,Micro-ATX / ATX PSU / I/O Ports USB 3.0 x4, HD Audio
Right(system 2) : Motherboard Micro-ATX ,Mini-ITX / ATX PSU / Optical drives and HDD rack/ I/O Ports USB 3.0 x4, HD Audio

Hard Disk Drive Space
Modular 5.25″ bay.
Each HDD rack can support three 3.5″ drives and two 2.5″ drives.
Hot-swap support.

2x 2.5″ drive bays on the case floor.

Cable management

Maximum Compatibility
SYSTEM 1 : VGA Card length: 420mm / PSU length: 420mm / CPU cooler height: 165mm
SYSTEM 2 : VGA Card length: 320mm / PSU length: 270mm / CPU cooler height: 155mm

FEATURES: A hinge on the front of the chassis allows for easy access to the internal components. Thermal There are 120mm fan on the rear to exhaust the hot air out of the chassis. HDD / SSD Space 1.Front : 2.5″ HDD x3 or 3.5″ HDD +2.5″HDD x2 2.Side : 3.5″ HDD x2 or 3.5″ +2.5″ HDD Compatibility VGA Card length: 220mm / PSU Space: 200mm / CPU cooler height: 180mm

A hinge on the front of the chassis allows for easy access to the internal components.

Thermal
There are 120mm fan on the rear to exhaust the hot air out of the chassis.

HDD / SSD Space
1.Front : 2.5″ HDD x3 or 3.5″ HDD +2.5″ HDD x2
2.Side : 3.5″ HDD x2 or 3.5″ +2.5″ HDD

Compatibility
VGA Card length: 220mm / PSU Space: 200mm / CPU cooler height: 180mm