This book presents a complete and updated overview of Flame Spray process, from its History to the Apparatus necessary for the synthesis of nanostructures. It addresses not only the materials produced by this technique, but also their properties, such as crystallinity and crystallite size, specific surface area, particle size and morphology. Also, the principles of nanoparticle formation are described. It is a useful read to all those interested in low cost synthesis of nanostructured powders and coatings.

Cracks can develop in rotating shafts and can propagate to relevant depths without affecting consistently the normal operating conditions of the shaft. In order to avoid catastrophic failures, accurate vibration analyses have to be performed for crack detection. The identification of the crack location and depth is possible by means of a model based diagnostic approach, provided that the model of the crack and the model of the cracked shaft dynamical behavior are accurate and reliable. This monograph shows the typical dynamical behavior of cracked shafts and presents tests for detecting cracks. The book describes how to model cracks, how to simulate the dynamical behavior of cracked shaft, and compares the corresponding numerical with experimental results. All effects of cracks on the vibrations of rotating shafts are analyzed, and some results of a numerical sensitivity analysis of the vibrations to the presence and severity of the crack are shown. Finally the book describes some crack identification procedures and shows some results in model based crack identification in position and depth. The book is useful for higher university courses in mechanical and energetic engineering, but also for skilled technical people employed in power generation industries.

Modeling and Control of Batch Processes presents state-of-the-art techniques ranging from mechanistic to data-driven models. These methods are specifically tailored to handle issues pertinent to batch processes, such as nonlinear dynamics and lack of online quality measurements. In particular, the book proposes: a novel batch control design with well characterized feasibility properties; a modeling approach that unites multi-model and partial least squares techniques; a generalization of the subspace identification approach for batch processes; and applications to several detailed case studies, ranging from a complex simulation test bed to industrial data. The book's proposed methodology employs statistical tools, such as partial least squares and subspace identification, and couples them with notions from state-space-based models to provide solutions to the quality control problem for batch processes. Practical implementation issues are discussed to help readers understand the application of the methods in greater depth. The book includes numerous comments and remarks providing insight and fundamental understanding into the modeling and control of batch processes. Modeling and Control of Batch Processes includes many detailed examples of industrial relevance that can be tailored by process control engineers or researchers to a specific application. The book is also of interest to graduate students studying control systems, as it contains new research topics and references to significant recent work. Advances in Industrial Control reports and encourages the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.

Hydroforming uses a pressurised fluid to form component shapes. The process allows the manufacture of lighter, more complex shapes with increased strength at lower cost compared to more traditional techniques such as stamping, forging, casting or welding. As a result hydroformed components are increasingly being used in the aerospace, automotive and other industries. This authoritative book reviews the principles, applications and optimisation of this important process.
After an introduction, the first part of the book reviews the principles of hydroforming, from equipment and materials to forming processes, design and modelling. The second part of the book reviews the range of hydroforming techniques, the shaping of particular components and the application of hydroforming in aerospace and automotive engineering.
With its distinguished editor and team of contributors, Hydroforming for advanced manufacturing is a valuable reference for all those developing and applying this important process.
Reviews the principles of hydroformingExplores the range of hydroforming techniquesHighlights the application of hydroforming in aerospace and automotive engineering

The book shows how simulation's long history and close ties to industry since the third industrial revolution have led to its growing importance in Industry 4.0. The book emphasises the role of simulation in the new industrial revolution, and its application as a key aspect of making Industry 4.0 a reality - and thus achieving the complete digitisation of manufacturing and business. It presents various perspectives on simulation and demonstrates its applications, from augmented or virtual reality to process engineering, and from quantum computing to intelligent management. Simulation for Industry 4.0 is a guide and milestone for the simulation community, as well as those readers working to achieve the goals of Industry 4.0. The connections between simulation and Industry 4.0 drawn here will be of interest not only to beginners, but also to practitioners and researchers as a point of departure in the subject, and as a guide for new lines of study.

This book presents the proceedings of the 4th International Conference on Integrated Petroleum Engineering and Geosciences 2016 (ICIPEG 2016), held under the banner of World Engineering, Science & Technology Congress (ESTCON 2016) at Kuala Lumpur Convention Centre from August 15 to 17, 2016. It presents peer-reviewed research articles on exploration, while also exploring a new area: shale research. In this time of low oil prices, it highlights findings to maintain the exchange of knowledge between researchers, serving as a vital bridge-builder between engineers, geoscientists, academics, and industry.

Presenting current trends in the development and applications of intelligent systems in engineering, this monograph focuses on recent research results in system identification and control. The recurrent neurofuzzy and the fuzzy cognitive network (FCN) models are presented.Both models are suitable for partially-known or unknown complex time-varying systems. Neurofuzzy Adaptive Control contains rigorous proofs of its statements which result in concrete conclusions for the selection of the design parameters of the algorithms presented. The neurofuzzy model combines concepts from fuzzy systems and recurrent high-order neural networks to produce powerful system approximations that are used for adaptive control. The FCN modelstems from fuzzy cognitive maps and uses the notion of concepts and their causal relationships to capture the behavior of complex systems. The book shows how, with the benefit of proper training algorithms, these models are potent system emulators suitable for use in engineering systems.All chapters are supported by illustrative simulation experiments, while separate chapters are devoted to the potential industrial applications of each model including projects in:

contemporary power generation;

process control and

conventional benchmarking problems.

Researchers and graduate students working in adaptive estimation and intelligent control will find Neurofuzzy Adaptive Control of interest both for the currency of its models and because it demonstrates their relevance for real systems. The monograph also shows industrial engineers how to test intelligent adaptive control easily using proven theoretical results."

The primary aim of this volume is to provide researchers and engineers from both academia and industry with up-to-date coverage of recent advances in the fields of robotic welding, intelligent systems and automation. It gathers selected papers from the 2018 International Conference on Robotic Welding, Intelligence and Automation (RWIA 2018), held Oct 20-22, 2018 in Guangzhou, China. The contributions reveal how intelligentized welding manufacturing (IWM) is becoming an inescapable trend, just as intelligentized robotic welding is becoming a key technology. The volume is divided into four main parts: Intelligent Techniques for Robotic Welding, Sensing in Arc Welding Processing, Modeling and Intelligent Control of Welding Processing, and Intelligent Control and its Applications in Engineering.

This volume gathers the peer reviewed papers presented at the 4th edition of the International Workshop "Service Orientation in Holonic and Multi-agent Manufacturing - SOHOMA'14" organized and hosted on November 5-6, 2014 by the University of Lorraine, France in collaboration with the CIMR Research Centre of the University Politehnica of Bucharest and the TEMPO Laboratory of the University of Valenciennes and Hainaut-Cambresis. The book is structured in six parts, each one covering a specific research line which represents a trend in future manufacturing: (1) Holonic and Agent-based Industrial Automation Systems; (2) Service-oriented Management and Control of Manufacturing Systems; (3) Distributed Modelling for Safety and Security in Industrial Systems; (4) Complexity, Big Data and Virtualization in Computing-oriented Manufacturing; (5) Adaptive, Bio-inspired and Self-organizing Multi-Agent Systems for Manufacturing and (6) Physical Internet Simulation, Modelling and Control. There is a clear orientation of the SOHOMA'14 workshop towards complexity, which is a common view of all six parts. There is need for a framework allowing the development of manufacturing cyber physical systems including capabilities for complex event processing and data analytics which are expected to move the manufacturing domain closer towards cloud manufacturing within contextual enterprises. Recent advances in sensor, communication and intelligent computing technologies made possible the Internet connectivity of the physical world: the Physical Internet, where not only documents and images are created, shared, or modified in the cyberspace, but also the physical resources and products interact over Internet and make decisions based on shared communication.

Evolving technologies in mass production have led to the development of advanced techniques in the field of manufacturing. These technologies can quickly and effectively respond to various market changes, necessitating processes that focus on small batches of multiple products rather than large, single-product lines. Formal Methods in Manufacturing Systems: Recent Advances explores this shifting paradigm through an investigation of contemporary manufacturing techniques and formal methodologies that strive to solve a variety of issues arising from a market environment that increasingly favors flexible systems over traditional ones. This book will be of particular use to industrial engineers and students of the field who require a detailed understanding of current trends and developments in manufacturing tools. This book is part of the Advances in Civil and Industrial Engineering series collection.

This book provides a detailed understanding of optimization methods as they are implemented in a variety of manufacturing, fabrication and machining processes. It covers the implementation of statistical methods, multi-criteria decision making methods and evolutionary techniques for single and multi-objective optimization to improve quality, productivity, and sustainability in manufacturing. It reports on the theoretical aspects, special features, recent research and latest development in the field. Optimization of Manufacturing Processes is a valuable source of information for researchers and practitioners, as it fills the gap where no dedicated book is available on intelligent manufacturing/modeling and optimization in manufacturing. Readers will develop an understanding of the implementation of statistical and evolutionary techniques for modeling and optimization in manufacturing.

This book assesses the state of international manufacturing strategy and clarifies how recent developments, for example regarding configuration, technology, and the environment, are impacting on its content and direction and on its relationship to manufacturing performance. In providing up-to-date coverage of the consequences of such forces and factors for international manufacturing, this book aims to expand the debate concerning international manufacturing strategy and cast light on its current evolution. International manufacturing is operating within a time of great flux. While offshoring of activities has dominated over recent decades, nearshoring and reshoring are increasingly being considered and observed in practice. At the same time, technologies such as 3D-printing are gaining traction and the role of ICT and data analytics is increasingly important in the international manufacturing landscape while digitization becomes more prevalent and the embrace of the Internet of Things (IOT) accelerates. Furthermore, issues related to the environment are figuring more prominently in international manufacturing considerations, and assumptions regarding the long-term cost of energy are being called into question. International manufacturing is also experiencing greater servitization.

This volume provides the reader with an integrated overview of state-of-the-art research in philosophy and ethics of design in engineering and architecture. It contains twenty-five essays that focus on engineering designing in its traditional sense, on designing in novel engineering domains, including ICT, genetics, and nanotechnology, designing of socio-technical systems, and on architectural and environmental designing. Written for Faculty, PhD and Master's students in philosophy and ethics of technology, philosophy and ethics of architecture, management of technology, management of architecture.

This book describes different approaches for solving industrial problems like product design, process optimization, quality enhancement, productivity improvement and cost minimization. Several optimization techniques are described. The book covers case studies on the applications of classical as well as evolutionary and swarm optimization tools for solving industrial issues. The content is very helpful for industry personnel, particularly engineers from the Operation, R&D and Quality Assurance sectors, and also the academic researchers of different engineering and/or business administration background.

This book introduces readers to titanium matrix composites (TMCs) with novel network microstructures. The bottleneck problem of extreme brittleness and low strengthening effect surrounding TMCs fabricated by means of powder metallurgy has recently been solved by designing network microstructures, which yield both high strength and superior ductility. As such, network structured TMCs will increasingly offer materials characterized by low weight, high strength, high temperature resistance and superior deformability. The book systematically addresses the design, fabrication, microstructure, properties, modification, and toughening mechanisms of these composites, which will help us find innovative solutions to a range of current and future engineering problems.

Dear reader! In your hand you have the second book from the series "XXI Century Techno- gies. " The first book under the title "Manufacturing Technologies for Machines of the Future" was published by "Springer" in 2003. This book is aimed at solving one of the basic problems in the development of modern machine-building - working out of technologies and manufacturing equipment which would promote the continuous development and improvement of the final product design, rapidly "adaptable" to the requirements of the market as for the quantity, quality, and variety of products manufactured with the lowest cost and minimum time and labor of the product process. In this book the problems of theory and practice of development in the reconfigurable manufacturing systems and transformable factories for various machine-building branches with a focus on automotive industry are discussed. The problems concerning the development of a new class of production systems which in comparison to the flexible manufact- ing systems are composed of a far less quantity of machine-tools (reduced cost of production) are discussed. In comparison to the conventional automated lines (dedicated systems) they make it possible to rapidly transform the equipment for new products manufacturing. The book has some advantages concerning the art of scientific ideas and the presentation of developments.

This book comprises the proceedings of International Conference on Research and Innovations in Mechanical Engineering (ICRIME 2013) organized by Guru Nanak Dev Engineering College, Ludhiana with support from AICTE, TEQIP, DST and PTU, Jalandhar. This international conference served as a premier forum for communication of new advances and research results in the fields of mechanical engineering. The proceedings reflect the conference's emphasis on strong methodological approaches and focus on applications within the domain of mechanical engineering. The contents of this volume aim to highlight new theoretical and experimental findings in the fields of mechanical engineering and closely related fields, including interdisciplinary fields such as robotics and mechatronics.

Lot Streaming is a process of breaking a batch of jobs into smaller lots, and then processing these smaller lots in an overlapping fashion on the machines. This important concept can significantly improve the overall performance of a production process, and thereby make the operation of a manufacturing system lean. Flow Shop Lot Streaming Problems introduces the reader to this significant production process, presents various analysis techniques, and allows the reader to quickly become conversant with the state-of-the-art techniques in order to embark on new research directions. This text begins with an introduction to and a brief historical perspective of the lot streaming problem, and continues with generic mathematical models for this problem. Flow Shop Lot Streaming Problems presents systematic analysis, algorithms, key ideas and illustrative examples using 2-machine, 3-machine, and the general m-machine flow shop lot streaming problems.

Laser shock peening (LSP) is a relatively new surface treatment for metallic materials. LSP is a process to induce compressive residual stresses using shock waves generated by laser pulses. LSP can greatly improve the resistance of a material to crack initiation and propagation brought on by cyclic loading and fatigue. This pioneering book was the first of its kind to consolidate scattered knowledge into one comprehensive volume. It describes the mechanisms of LSP and its substantial role in improving fatigue performance in terms of modification of microstructure, surface morphology, hardness and strength. In particular it describes numerical simulation techniques and procedures which can be adopted by engineers and research scientists to design, evaluate and optimise LSP processes in practical applications.
Provides for the first time, a comprehensive coverage of this important areaWritten by two world renowned experts

This book explains integrated circuit design for manufacturability (DfM) at the product level (packaging, applications) and applies engineering DfM principles to the latest standards of product development at 22 nm technology nodes. It is a valuable guide for layout designers, packaging engineers and quality engineers, covering DfM development from 1D to 4D, involving IC design flow setup, best practices, links to manufacturing and product definition, for process technologies down to 22 nm node, and product families including memories, logic, system-on-chip and system-in-package.

Product Realization: A Comprehensive Approach is based on selected papers presented at the International Conference on Comprehensive Product Realization 2007 (ICCPR2007). The extended papers will provide the opportunity for scholars from all around the world to discuss their academic programs, identify research opportunities, and initiate joint research programs in the area of comprehensive product realization. Engineering design has evolved from an isolated semi-empirical activity to a highly interconnected, multidisciplinary product realization collaborative process.

The scope of the book will focus on a number of themes within the framework of the conference that are deemed essential to educating the next generation of students and practicing engineers in the area of product realization.

In recent years the use of liquid—liquid extraction equipment has attracted widespread interest from all major chemical engineering, petroleum and pharmaceutical companies as well as university-based scientists and engineers. Liquid—Liquid Extraction Equipment presents :

• a critical analysis of all available information, including practical recommendations
• new ideas on performance enhancement and equipment selection
• an up-to-date review of research results on equipment performance
• illustrations of present understanding using well-known equipment
• a concise survey of past, present and forthcoming procedures

Location analysis has matured from an area of theoretical inquiry that was designed to explain observed phenomena to a vibrant field which can be and has been used to locate items as diverse as landfills, fast food outlets, gas stations, as well as politicians and products in issue and feature spaces. Modern location science is dealt with by a diverse group of researchers and practitioners in geography, economics, operations research, industrial engineering, and computer science. Given the tremendous advances location science has seen from its humble beginnings, it is time to look back. The contributions in this volume were written by eminent experts in the field, each surveying the original contributions that created the field, and then providing an up-to-date review of the latest contributions. Specific areas that are covered in this volume include: * The three main fields of inquiry: minisum and minimax problems and covering models * Nonstandard location models, including those with competitive components, models that locate undesirable facilities, models with probabilistic features, and problems that allow interactions between facilities * Descriptions and detailed examinations of exact techniques including the famed Weiszfeld method, and heuristic methods ranging from Lagrangean techniques to Greedy algorithms * A look at the spheres of influence that the facilities generate and that attract customers to them, a topic crucial in planning retail facilities * The theory of central places, which, other than in mathematical games, where location science was born