A 'soft-rock' petroleum-type approach to exploration for 'hard-rock' minerals in sedimentary basins D. Taylor I. Introduction Several major groups of ore deposits are found as tabular, stratiform bodies or as cross- cutting but essentially stratabound deposits within sedimentary basins. Important exam- ples are oxide and carbonate ores of iron and manganese, copper and zinc-lead sulphides and gold-uranium deposits. Where the host basins have been strongly in- verted and deeply eroded and the mineralized horizons brought to outcrop, the laterally extensive nature of the mineralization usually results in outcrop or subcrop of the ore itself. Direct detection by geological or geochemical prospecting is then possible. Major deposits also occur in basins which have not been strongly deformed and deeply eroded as non-outcropping sub-horizontal sheets (Polish Kupferschiefer deposits of the fore-Sudetic Monocline) or linear belts (Vibumam Trend, Missouri, Admiral Bay, NW Australia). I believe that both the Polish Kupferschiefer and Admiral Bay de- posits were found by chance during oil and gas exploration, and deposits of this type are similar in attitude and dimensions to small-medium size oil and gasfields.

The proceedings of the 6th International Symposium on Mining in the Arctic, held in Greenland in 2001. The papers cover a wide variety of topics, including: mining exploration and exploitation; mining engineering and mine design; environmental impact of mining in the Arctic; and more.

This book is a collection of papers that are devoted to various aspects of interactions between mineralogy and material sciences. It will include reviews, perspective papers and original research papers on mineral nanostructures, biomineralization, micro- and nanoporous mineral phases as functional materials, physical and optical properties of minerals, etc. Many important materials that dominate modern technological development were known to mineralogists for hundreds of years, though their properties were not fully recognized. Mineralogy, on the other hand, needs new impacts for the further development in the line of modern scientific achievements such as bio- and nanotechnologies as well as by the understanding of a deep role that information plays in the formation of natural structures and definition of natural processes. It is the idea of this series of books to provide an arena for interdisciplinary discussion on minerals as advanced materials.

The structural optimization procedure presented in this book makes it possible to achieve seismic protection through integrated structural/control system design. In particular, it is explained how slender structural systems with a high seismic performance can be achieved through inclusion of viscous and viscoelastic dampers as an integral part of the system. Readers are provided with essential introductory information on passive structural control and passive energy dissipation systems. Dynamic analyses of both single and multiple degree of freedom systems are performed in order to verify the achievement of pre-assigned performance targets, and it is explained how the optimal integrated design methodology, also relevant to retrofitting of existing buildings, should be applied. The book illustrates how structural control research is opening up new possibilities in structural forms and configurations without compromising structural performance.

This is the first book entirely devoted to travertine, a material in use for over 4000 years. The single-author work is a valuable reference source for travertine, covering all aspects of travertine origins, formation, composition, flora and fauna, occurrence and utilisation, as well as covering allied continental carbonates such as lake marls, calcretes and beachrocks.
Travertine, some forms of which are often known as a ~tufaa (TM), is of particular significance as a source of environmental information (fossils and isotope geochemistry), often permitting the reconstruction of past environments. Reviews of dating techniques, classification and geomorphology are included and the author attempts to provide an unbiased but critical appraisal of current models of travertine formation.
Currently, travertine is in great demand as a building and ornamental stone. It has also been exploited in unconventional ways, such as a ~petrifying springsa (TM) and by way of unusual and little known artistic techniques. Scaling of pipes and boilers is often the result of processes allied to travertine formation. The phenomenon is described parallel to methods of scale elimination and compared with natural processes where travertine formation is inhibited. Travertine sites are of special scientific interest, with their rich and often unique floras and faunas displaying their unique biodiversity, and their unusual and often fragile biota. Conservation issues are discussed, together with the description of travertine fossils and occurrences throughout the geological record.
The content will be of interest to carbonate sedimentologists, hydrobiologists, palaeoclimatologists, physicalgeographers, water treatment engineers, astrobiologists, architects, and sculptors.

More than half of the world's petroleum is to be found in carbonate rocks, for example in the Middle East, the former USSR and in North America. These rocks show a bewildering diversity of grains and textures, due in part to the wealth of different fossil organisms which have contributed to carbonate sedimentation, and in part to a wide variety of diagenetic processes which can radically modify textures and obscure the depositional fabric. Careful petrographic study with a polarising microscope is a key element of any study of carbonate sediments, as a companion to field or core logging, and as a necessary precursor to geochemical analysis. This atlas, which illustrates in full colour a range of features not attempted in any general textbook, is designed as a laboratory manual to keep beside the microscope, as an aid to identifying grain types and textures in carbonates. It appeals alike to undergraduate and graduate students and to professionals in teaching institutions, research laboratories and industry.

This volume contains the edited papers prepared by lecturers and participants of the NATO Advanced Study Institute on "Statistical Treatments for Estimation of Mineral and Energy Resources" held at II Ciocco (Lucca), Italy, June 22 - July 4, 1986. During the past twenty years, tremendous efforts have been made to acquire quantitative geoscience information from ore deposits, geochemical, geophys ical and remotely-sensed measurements. In October 1981, a two-day symposium on "Quantitative Resource Evaluation" and a three-day workshop on "Interactive Systems for Multivariate Analysis and Image Processing for Resource Evaluation" were held in Ottawa, jointly sponsored by the Geological Survey of Canada, the International Association for Mathematical Geology, and the International Geological Correlation Programme. Thirty scientists from different countries in Europe and North America were invited to form a forum for the discussion of quantitative methods for mineral and energy resource assessment. Since then, not only a multitude of research projects directed toward quantitative analysis in the Earth Sciences, but also recent advances in hardware and software technology, such as high-resolution graphics, data-base management systems and statistical packages on mini and micro-computers, made it possible to study large geoscience data sets. In addition, methods of image analysis have been utilized to capture data in digital form and to supply a variety of tools for charaterizing natural phenomena."

This book presents the development of an optimization platform for geotechnical engineering, which is one of the key components in smart geotechnics. The book discusses the fundamentals of the optimization algorithm with constitutive models of soils. Helping readers easily understand the optimization algorithm applied in geotechnical engineering, this book first introduces the methodology of the optimization-based parameter identification, and then elaborates the principle of three newly developed efficient optimization algorithms, followed by the ideas of a variety of laboratory tests and formulations of constitutive models. Moving on to the application of optimization methods in geotechnical engineering, this book presents an optimization-based parameter identification platform with a practical and concise interface based on the above theories. The book is intended for undergraduate and graduate-level teaching in soil mechanics and geotechnical engineering and other related engineering specialties. It is also of use to industry practitioners, due to the inclusion of real-world applications, opening the door to advanced courses on both modeling and algorithm development within the industrial engineering and operations research fields.

The interpretation of ancient sedimentary environments is a vital tool in the search for petroleum, coal and other economic resources. This fourth edition of this text has been rewritten to reflect advances in the subject, in particular stratigraphy and new geophysical techniques. New case studies have been added where appropriate.

This book, based on Transport and Urban Development COST Action TU1208, presents the most advanced applications of ground penetrating radar (GPR) in a civil engineering context, with documentation of instrumentation, methods and results. It explains clearly how GPR can be employed for the surveying of critical transport infrastructure, such as roads, pavements, bridges and tunnels and for the sensing and mapping of underground utilities and voids. Detailed attention is also devoted to use of GPR in the inspection of geological structures and of construction materials and structures, including reinforced concrete, steel reinforcing bars and pre/post-tensioned stressing ducts. Advanced methods for solution of electromagnetic scattering problems and new data processing techniques are also presented. Readers will come to appreciate that GPR is a safe, advanced, non destructive and noninvasive imaging technique that can be effectively used for the inspection of composite structures and the performance of diagnostics relevant to the entire life cycle of civil engineering works.

This thesis summarizes the metallogenetic mechanism of the Galinge skarn deposit based on integrated knowledge of tectonics, geochemistry, geochronology, petrology, mineralogy, thermodynamics and hydrothermal fluids. It also discusses the multistage growth characteristics of various skarn minerals in which the varying compositions reflect the evolution of the hydrothermal fluid. The multidisciplinary nature of this research sheds new light on reconstructing metallogenetic processes successfully. It outlines the main aspects of skarn zonation based on the dominant contents of the skarn minerals and the wall rock compositions. In addition, it focuses on volatile-rich minerals including tourmaline and hastingsite, highlighting the importance of the volatile component in the skarn deposit. Lastly, it describes the regional tectonic-magmatic evolutionary history to explain the metallogenic principles, which can be used to guide prospecting in the field.

Geochemical methods of prospecting for and evaluation of minerals are applied widely today at all stages of geological exploration. However, geochemical methods of prospecting for many classes of non-metallic minerals have not been elaborated.
This book is a completely revised, updated and expanded edition of the publication by the same authors, which was published in 1987. The contains a collection the latest data on geochemical prospecting for non-metals, which is valuable in view of the anticipated increase of consumption and utilization of non-metallic minerals in the future.
The information on various types of raw material is presented in the following sequence: 1) general data (genetic types, conditions of formation, geological prospecting indications); 2) indicator minerals and elements; 3) geochemical methods of prospecting along dispersion trains and haloes, plus hydrogeochemical and geobotanical methods; 4) primary endogenic haloes; 5) vertical geochemical zonality; 6) methods, stages and sequence of work.

Produced sand causes a lot of problems. From that reasons sand production must be monitored and kept within acceptable limits. Sand control problems in wells result from improper completion techniques or changes in reservoir properties. The idea is to provide support to the formation to prevent movement under stresses resulting from fluid flow from reservoir to well bore. That means that sand control often result with reduced well production. Control of sand production is achieved by: reducing drag forces (the cheapest and most effective method), mechanical sand bridging (screens, gravel packs) and increasing of formation strength (chemical consolidation). For open hole completions or with un-cemented slotted liners/screens sand failure will occur and must be predicted. Main problem is plugging. To combat well failures due to plugging and sand breakthrough Water-Packing or Shunt-Packing are used.

The cost-effective recovery of oil and gas depends on an understanding of both reservoir and petroleum engineering, yet these are, increasingly, becoming self-contained fields. Hydrocarbon Reservoir and Well Performance brings the two subjects together for the first time and, by explaining both fundamental concepts and actual practice, helps in understanding their interrelation. Using both SI and Imperial units, this book will be of interest to students of petroleum science, and practitioners in reservoir geology, evaluation and production.

""" This book has been written as a guide to the management and use of formulated feeds in intensive fish and shrimp culture. While its focus is on the use of commercially pro duced feeds in intensive production systems, it is anticipated that many of the practical issues covered will be of equal interest to those fish farmers who make their own feeds and to those who use formulated feeds in less intensive systems. Feeds and feeding are the major variable operating costs in intensive aquaculture and the book is primarily in tended to aid decision making by fish farm managers in areas of feeding policy. The dramatic increases in aquaculture production seen over the past 15 years have been made possible, in large part, by gains in our understanding of the food and feed ing requirements of key fish and shrimp species. A global aquaculture feeds industry has developed and a wide range of specialist feeds is now sold. The new options in feeds and feeding systems, which are becoming available, necessitate continual review by farmers of their feeding policies, where choices must be made as to appropriate feed types and feeding methods. While growth rates and feed conversion values are the prime factors of interest to farmers, other important issues, such as product qualiry and environmental impacts of farm effluents, are also directly related to feed management practices."

This book is offered as a contribution to the spread of knowledge and understanding in the field of strata mechanics in coal mining. It is written for professionals in the coal mining industry and students of mining engineering and includes some of the author's own philosophy of coal mine stability.

PGE V-Voisey's Bay (Canada) D -Duluth Complex (USA) K-Kambalda (Australia) M-Merensky Reef (Bushveld) N -Noril'sk region (Russia) P-Pechenga(Russia) S-Sudbury (Canada) T-Thompson (Canada) J -Jinchuan (China) L-Lac des lies (Canada) PR-Platreef (Bushveld) Po-Portimo Complex (Finland) R-Raglan (Canada) U-UG-2 chromitite (Bushveld) Z-Great Dyke of Zimbabwe e-Mt Keith (Australia) . a. -Perseverance (Australia) +-Stillwater (USA) 0 0 0 'c9 -~ Ni+Co Cu Relative value of Ni+Co Fig. 1. 1. Relative va1ue of the contributions of Ni+Co, Cu and PGE to the mag- matic su1fide deposits listed in Table 1. 1 sulfide deposits are closely related to bodies of mafic or ultramafic rock, and the most convenient way in which to consider them is in terms of the type of magma responsible for the rocks with which they are associated. Typically the type of magma involved bears a close relationship to the tec- tonic setting within which it was emplaced. The locations of important deposits, both Ni-Cu dominant and PGE dominant, are shown in Fig. 1. 2. Considering first Ni-Cu deposits, these are further divided into six classes (Table 1. 2) on the basis of their associated magma type. Class NC- 1 (Chap. 3) comprises those related to komatiitic magmatism. Currently known deposits fall into two sub-classes, those related to Archean komatiites ( e. g. the deposits of Western Australia, Zimbabwe and the Abitibi belt of Canada) and those related to Proterozoic komatiites (e. g. those ofthe Raglau and Thompson belts which arebothin Canada)l.

This book combines issues several critical ones in the energy field (low-energy technologies, renewable energies such as the hydrogen economy, and geothermal energy). Moving towards a more sustainable world requires a complete revolution in the way we manage energy and resources. However, from an academic perspective, this theme is so broad that most educators and researchers tend to focus on just one aspect, and maintaining the broad viewpoint which is necessary for making strategic judgments becomes difficult. Tohoku University addressed this challenge when developing a new education and training program for environmental leaders and brought together the extensive range of expertise available in specific fields into one special course which forms the basis of this book. Now in one volume, both students and educators can be brought up to date on a wide range of critical issues currently being addressed in the field of energy and resources. Chapters on resources include availability (for instance, rare earth metals), extraction and recycling of metals and plastics, and technological solutions to specific waste-disposal problems. In addition, broader strategic issues such as limits to growth and the interaction between the economic system and environmental issues are addressed. Even though each chapter provides topical data and knowledge from disparate and specialized fields, the book is written at a level that is readily understandable by students from all scientific, engineering, and humanities fields.

This book includes keynote presentations, invited speeches, and general session papers presented at the 7th International Symposium on Environmental Vibration and Transportation Geodynamics (formerly the International Symposium on Environmental Vibration), held from October 28 to 30, 2016 at Zhejiang University, Hangzhou, China. It discusses topics such as the dynamic and cyclic behaviors of soils, dynamic interaction of vehicle and transportation infrastructure; traffic-induced structure and soil vibrations and wave propagation; soil-structure dynamic interaction problems in transportation; environmental vibration analysis and testing; vehicle, machine and human-induced vibrations; monitoring, evaluation and control of traffic induced vibrations; transportation foundation deformation and deterioration induced by vibration; structural safety and serviceability of railways, metros, roadways and bridges; and application of geosynthetics in transportation infrastructure. It is a valuable resource for government managers, scientific researchers, and engineering professionals engaged in the field of geotechnical and transportation engineering.

This book concisely describes the architecture of the oil and gas pipelines in the Black-Caspian Seas Region and analyzes the status quo and perspectives of oil and gas production in this region. The authors present numerous projects, each of which has made a substantial contribution to the development of pipeline transport and transit in this part of the world, and discuss them in detail. The topics covered include: the region's geographic characteristics; the region's hydrocarbon potential; Russian and EU policy on pipeline transport; Kazakhstan's pipeline policy; Chinese pipeline projects; the Bulgarian gas transmission system; environmental risks in the production and transportation of hydrocarbons; satellite monitoring; and subsea leak detection. This volume offers a valuable resource for politicians, specialists in the oil and gas business, decision-makers, and environmentalists alike.

This book addresses the origin of gold deposits to answer questions of science and curiosity. These answers contribute in turn to the improved exploration and mining of gold. Initially there is a summary of the methods used to address the genesis of gold deposits including some of the essential science and concepts. Five basic observations follow that apply to many gold deposits and need to be considered in any genetic ideas. Magmatic processes enriching gold are discussed followed by the role of aqueous fluids during gold deposit formation at elevated temperatures and pressures. Modifying effects after deposit formation include high-grade metamorphism, retrogression, weathering, and erosion. The main types of gold deposits are then explained within the spectrum of viable genetic ideas, with informal names for these examples that include gold-only, gold-plus, Carlin, slate-belt, epithermal, porphyry, iron oxide copper gold, and Archean greenstone. Case histories are included in which the role of gold geology contributed directly to discoveries-one example is at the province-scale and another at the goldfield-scale. Unlike other books on the subject, this one addresses virtually all gold deposit types rather than focusing on one type in isolation. The primary readership includes industry geologists, senior undergraduates, postgraduates, and those with some knowledge of science and an interest in the gold industry.

Reservoir Characterization of Tight Gas Sandstones: Exploration and Development is essential reading for those working in oil and gas exploration (both in industry and academia) as it contains chapters that help them further understand all aspects of tight gas reservoirs. In this book, experts in industry and academia update readers on new methods of tight gas reservoir modeling and evaluation. As there are very limited published books in the field of tight sandstones, this book will benefit readers by making them familiar with state-of-art methods of tight gas sandstones characterization and evaluation.

This book contains contributions to the 10th International Workshop on Bifurcation and Degradation in Geomaterials held in Hong Kong, May 28-30, 2014. This event marks the silver Jubilee anniversary of an international conference series dedicated to the research on localization, instability, degradation and failure of geomaterials since 1988 when its first workshop was organized in Germany. This volume of book collects the latest progresses and state-of-the-art research from top researchers around the world, and covers topics including multiscale modeling, experimental characterization and theoretical analysis of various instability and degradation phenomena in geomaterials as well as their relevance to contemporary issues in engineering practice. This book can be used as a useful reference for research students, academics and practicing engineers who are interested in the instability and degradation problems in geomechanics and geotechnical engineering.