The Porcelain Painter Range offers shades within a colour system. Basic and fashion colours can be always combined with the corresponding Metallic and Glitter shades.
Whether tastefully colour-matched creations or extravagant colour combinations are desired – everything is possible with the wide colour range from Marabu.
Various kinds of painting techniques can be easily achieved with the painters.

Porcelain Painters are offered in 4 different tip shapes/sizes: from large paint applications with the brush tip, fine painting with the outline & Fineliner tip and decorative writing with the calligraphy tip.
The universal tip with a tip width of 1-2 mm is used as a practical all-rounder: it is ideal for painting and writing.

Note: Despite manufacturer claims, products painted with this pen require baking for the paint to set.

Easy to use, as you paint straight from the liner. Ideal for almost any surface, from paper, wood, metal, glass, leather, plastic, fabrics (wash-resistant up to 40°C after fixing), etc.

Working Guidelines for Marabu-Metallic Liner and Glitter LinerEnsure that the surface is clean and dust-free. Drying time approx. 6 hours depending on colour application. For fabrics (cotton and blended textiles up to a maximum of 20 % synthetic fibres), wash out finishing and softening agents. Gently push liner tip onto the fabric and squeeze. After drying, iron each painted area for 3 min. on cotton setting with a thin cloth over the surface. Iron for 3 min. per 30 cm. Can also be fixed in a pre-heated oven (8 min. / 150°C). Test substrate for heat resistance first. Then wash-resistant up to 40°C. Wash and iron inside out.

Colourist Heat Transfer Paints allow you to create multi-coloured designs without specialist equipment. Using just a domestic iron you can print onto fabric, bags, Tshirts, coasters, placemats, bunting, tiles, jigsaws, Christmas decorations and many other items. You can use different painting techniques such as stamping, cut-outs and stencilling.Colourist Heat Transfer Paints should be printed onto 100% synthetic surfaces for the most vibrant, colourfast effects. Use polyester or acrylic for the best results. Mixed fibres can be used - the higher the synthetic content, the stronger the printed colours will be.

Easy to use, as you paint straight from the liner. Ideal for almost any surface, from paper, wood, metal, glass, leather, plastic, fabrics (wash-resistant up to 40°C after fixing), etc.

Working Guidelines for Marabu-Metallic Liner and Glitter LinerEnsure that the surface is clean and dust-free. Drying time approx. 6 hours depending on colour application. For fabrics (cotton and blended textiles up to a maximum of 20 % synthetic fibres), wash out finishing and softening agents. Gently push liner tip onto the fabric and squeeze. After drying, iron each painted area for 3 min. on cotton setting with a thin cloth over the surface. Iron for 3 min. per 30 cm. Can also be fixed in a pre-heated oven (8 min. / 150°C). Test substrate for heat resistance first. Then wash-resistant up to 40°C. Wash and iron inside out.

Water based fabric pen with excellent opacity for school, hobby, leisure use. Suitable for almost all light and dark-coloured, non-finished natural textiles free of dressing. After fixing, it is light-fast, wash-resistant up to 40°C and has a soft feel.

The Porcelain Painter Range offers shades within a colour system. Basic and fashion colours can be always combined with the corresponding Metallic and Glitter shades.
Whether tastefully colour-matched creations or extravagant colour combinations are desired – everything is possible with the wide colour range from Marabu.
Various kinds of painting techniques can be easily achieved with the painters.

Porcelain Painters are offered in 4 different tip shapes/sizes: from large paint applications with the brush tip, fine painting with the outline & Fineliner tip and decorative writing with the calligraphy tip.
The universal tip with a tip width of 1-2 mm is used as a practical all-rounder: it is ideal for painting and writing.

Note: Despite manufacturer claims, products painted with this pen require baking for the paint to set.

A water-based fabric pen for school, hobby, leisure use. The pen is suitable for almost all light-coloured, non-finished textiles free of dressing.After fixing, Marabu-Textil Painter is light-fast, wash-resistant up to 60°C and has a soft feel. The pen is equipped with a capillary system, so activation is not necessary.Marabu-Textil Painters are available in two tip widths and can be used in perfect combination with Marabu-Textil. When used as an outline pen, it can be combined with Marabu-Textil and Textil plus (please follow the fixing instructions carefully); the dark shades are even suitable for painting over Textil and Textil plus.

Colourist Heat Transfer Paints allow you to create multi-coloured designs without specialist equipment. Using just a domestic iron you can print onto fabric, bags, Tshirts, coasters, placemats, bunting, tiles, jigsaws, Christmas decorations and many other items. You can use different painting techniques such as stamping, cut-outs and stencilling.Colourist Heat Transfer Paints should be printed onto 100% synthetic surfaces for the most vibrant, colourfast effects. Use polyester or acrylic for the best results. Mixed fibres can be used - the higher the synthetic content, the stronger the printed colours will be.

Easy to use, as you paint straight from the liner. Ideal for almost any surface, from paper, wood, metal, glass, leather, plastic, fabrics (wash-resistant up to 40°C after fixing), etc.

Working Guidelines for Marabu-Metallic Liner and Glitter LinerEnsure that the surface is clean and dust-free. Drying time approx. 6 hours depending on colour application. For fabrics (cotton and blended textiles up to a maximum of 20 % synthetic fibres), wash out finishing and softening agents. Gently push liner tip onto the fabric and squeeze. After drying, iron each painted area for 3 min. on cotton setting with a thin cloth over the surface. Iron for 3 min. per 30 cm. Can also be fixed in a pre-heated oven (8 min. / 150°C). Test substrate for heat resistance first. Then wash-resistant up to 40°C. Wash and iron inside out.

Roberson Liquid Metals have a rich deep colour and are ideal for a range of applications and surfaces. All colours are intermixable and can be used on surfaces such as plaster, wood, paper & canvas. The paint gives the appearance of metal but will not tarnish and is not required to be varnished.

Roberson Liquid Metals are creamy acrylic colours that can be used on most surfaces including plaster, wood, paper & canvas. The rich, deep colour gives the appearance of metal but it will not tarnish and is not required to be varnished.

The 24 colour range includes 13 shades of gold, brass and bronze; eight shades of silver, pewter and platinum; a steel, a graphite and an interference, glittery colour (called Twinkle).
All colours are intermixable with each other and other acrylic paints. When mixed they add both their colour and their sparkle to other acrylic paints.

The colours are all transparent but in thicker applications they can cover quite well. The paints can be thinned with water and as the paint becomes more transparent the metallic shimmer is still visible. Clean up is with soap and water. If you intend to paint large things, the pots list the paint’s coverage as: 7 square metres per litre

Speciality Colours
Two of the 24 colour range are slightly different to the rest and have slightly different prices:

Twinkle: This variation of liquid metals produces colour changing effects with a hint of glitter. The use of different backgrounds will change the effects, for example dark backgrounds will show the glitter properties whereas light backgrounds provide a colour changing effect dependant on angle of view. It can be added to other colours to create a range of interesting effects.

Solid Silver: This variation of Liquid Metals differs from other silver shades within the range as it contains aluminium particles – this makes the liquid metal more opaque to provide excellent coverage.

A typically feminine colour, in a pastel, powdery hue. A gentle ground or the perfect contrast offset to pre-war decor. Also a taupe neutral that could be used tastefully in every setting.

Fleur Designer’s Paint has the unusual trait of being gorgeous, intense, rich colour that also is extremely matte. This is because the silicates and fine minerals contained with in it refract and diffuse light making it completely different from traditional acrylics.

Easy to use, as you paint straight from the liner. Ideal for almost any surface, from paper, wood, metal, glass, leather, plastic, fabrics (wash-resistant up to 40°C after fixing), etc.

Working Guidelines for Marabu-Metallic Liner and Glitter LinerEnsure that the surface is clean and dust-free. Drying time approx. 6 hours depending on colour application. For fabrics (cotton and blended textiles up to a maximum of 20 % synthetic fibres), wash out finishing and softening agents. Gently push liner tip onto the fabric and squeeze. After drying, iron each painted area for 3 min. on cotton setting with a thin cloth over the surface. Iron for 3 min. per 30 cm. Can also be fixed in a pre-heated oven (8 min. / 150°C). Test substrate for heat resistance first. Then wash-resistant up to 40°C. Wash and iron inside out.

Water based fabric pen with excellent opacity for school, hobby, leisure use. Suitable for almost all light and dark-coloured, non-finished natural textiles free of dressing. After fixing, it is light-fast, wash-resistant up to 40°C and has a soft feel.

Fantasy Prisme are opaque, Alkyd oil-based colours that dry to reveal a stunning honeycomb effect and a pearlescent finish. The effect will become visible as the paint dries over the course of 5 to 10 minutes. There are 28 colours available, all with a good lightfastness.Fantasy Prisme colours are ready-to-use and mixable with each other and other paint ranges, such as Vitrail, Ceramic, Cerne Relief, Studio Acrylics and Gédéo resins. This provides a the opportunity to experiment widely on flat horizontal surfaces.

Easy to use, as you paint straight from the liner. Ideal for almost any surface, from paper, wood, metal, glass, leather, plastic, fabrics (wash-resistant up to 40°C after fixing), etc.

Working Guidelines for Marabu-Metallic Liner and Glitter LinerEnsure that the surface is clean and dust-free. Drying time approx. 6 hours depending on colour application. For fabrics (cotton and blended textiles up to a maximum of 20 % synthetic fibres), wash out finishing and softening agents. Gently push liner tip onto the fabric and squeeze. After drying, iron each painted area for 3 min. on cotton setting with a thin cloth over the surface. Iron for 3 min. per 30 cm. Can also be fixed in a pre-heated oven (8 min. / 150°C). Test substrate for heat resistance first. Then wash-resistant up to 40°C. Wash and iron inside out.

Pebeo Marbling consists of 9 colours and 1 thickening powder to carry out the art of marbling easily on fabric, paper or any other light base. The technique of marbling used with Pebeo colours is a simplified and modernized bath technique.

Properties:QUALITY: Fine, broad or "brush" tipped markes for fabric.COLOUR COLOUR MIXABILITY: YesDRYING: Air dry for 30 minutes.SURFACES: All fabrics.Opacity: Transparent colours. Finish: Matt.FIXING: with an iron (cotton position), pressing for 2 to 3 minutes on the reverse side of the decorated fabric.CARING (decorated fabric): 48 hours after fixing, the colours are resistant to washing machine at 40°C (100°F).NUMBER OF COLOURS: 18 colours.STORAGE: store the markers flat wise.STANDARDS: Conforms to European toy safety standard 71. Security cap.Product Usage: Setaskrib+ felt tip markers for fabrics, are particularly practical for decorating T-shirts and cottons. The different tips can be used to produce various lines and effects and for outlining letters.

Quality:

Transparent, intense and very bright colours. Solvent based, ready to use. Good lightfastness. Use with the cerne relief.

Colour mixability:

Colours can be mixed together.

Drying:

Tack-free in one hour, fully dry in 8 hours if led in thin coats.

Surfaces:

Glass, polyester, acetate ..

Thinner:

Odourless mineral spirit or white spirit.

Opacity:

Transparent and opaque colours

Finish:

Brilliant.

Pébéo's Vitrail is applied with a brush to all carefully degreased transparent surfaces : glass, acetate, polyester, plexiglas.

The Level 6 Cap is an ultra wide fat cap, for an ultra wide average spray width from 5 - 25cm (2.0“ to 10“).The spray width changes with the used distance to the object. For skinnier lines, spray from a closer distance. For fatter lines, spray from a further distance.

Using this ideal marbling paint, beautiful marble effects can be achieved on many different substrates. Suitable for use on plastic eggs and balls (always try a test area first on plastic objects), glass, acrylic, wood, papier mâché, blown eggs, candles, metal and polystyrene. All objects should be plain and paint-free. Papers, Japanese paper, many fabrics and silks can also be marbled using Marabu-easy marble. The paint is organic solvent based and is touch-dry after about 15 minutes. The paint is not permanent and will wipe off with a damp cloth after drying; therefore the decorated objects are not washable and not wash-resistant.

Beautiful outlines and great effects are achieved with water based Marabu-Contours & Effects. As well as outlines, even smaller shapes can be painted with this product (e.g. by stencilling) producing new highlights on the silk. The flamboyant colours tone with the colour-shade groups of Marabu-Silk and Marabu-Silk Colour silk colours and increase the versatility of silk painting. In combination with Marabu-Velvet Touch velvety effect paint, these completely different effects can also be combined on one piece.The 25 ml liner is ideal for direct painting, because of the fine tips. For very fine outlines and decorations, Marabu paint tips can be screwed straight onto the liners. Marabu-Contours & Effects can be applied as outliner for further painting with Marabu-Silk, on dry silk painted with Marabu-Silk or on silk dyed with Marabu-Silk Colour and on untreated silk fabrics.

Using this ideal marbling paint, beautiful marble effects can be achieved on many different substrates. Suitable for use on plastic eggs and balls (always try a test area first on plastic objects), glass, acrylic, wood, papier mâché, blown eggs, candles, metal and polystyrene. All objects should be plain and paint-free. Papers, Japanese paper, many fabrics and silks can also be marbled using Marabu-easy marble. The paint is organic solvent based and is touch-dry after about 15 minutes. The paint is not permanent and will wipe off with a damp cloth after drying; therefore the decorated objects are not washable and not wash-resistant.

Fantasy Prisme are opaque, Alkyd oil-based colours that dry to reveal a stunning honeycomb effect and a pearlescent finish. The effect will become visible as the paint dries over the course of 5 to 10 minutes. There are 28 colours available, all with a good lightfastness.Fantasy Prisme colours are ready-to-use and mixable with each other and other paint ranges, such as Vitrail, Ceramic, Cerne Relief, Studio Acrylics and Gédéo resins. This provides a the opportunity to experiment widely on flat horizontal surfaces.

Using this ideal marbling paint, beautiful marble effects can be achieved on many different substrates. Suitable for use on plastic eggs and balls (always try a test area first on plastic objects), glass, acrylic, wood, papier mâché, blown eggs, candles, metal and polystyrene. All objects should be plain and paint-free. Papers, Japanese paper, many fabrics and silks can also be marbled using Marabu-easy marble. The paint is organic solvent based and is touch-dry after about 15 minutes. The paint is not permanent and will wipe off with a damp cloth after drying; therefore the decorated objects are not washable and not wash-resistant.

Water based fabric pen with excellent opacity for school, hobby, leisure use. Suitable for almost all light and dark-coloured, non-finished natural textiles free of dressing. After fixing, it is light-fast, wash-resistant up to 40°C and has a soft feel.