Quality:

Transparent, intense and very bright colour. Solvent based, ready to use. Good lightfastness. Use with the cerne relief.

Colour mixability:

Colours can be mixed together.

Drying:

Tack-free in one hour, fully dry in 8 hours if led in thin coats.

Surfaces:

Glass, polyester, acetate ..

Thinner:

Odourless mineral spirit or white spirit.

Opacity:

Transparent and opaque colours

Finish:

Brilliant.

Pébéo's Vitrail is applied with a brush to all carefully degreased transparent surfaces : glass, acetate, polyester, plexiglas.

Product Usage: • Objects decorated with Vitrail colours should not be considered for practical usage and are intended for decorative purposes only. Furthermore only surfaces not destined to be put in contact with food should be decorated. • Keep out of reach of children. If swallowed seek prompt medical attention and present the packaging or label.

Colourist Heat Transfer Paints allow you to create multi-coloured designs without specialist equipment. Using just a domestic iron you can print onto fabric, bags, Tshirts, coasters, placemats, bunting, tiles, jigsaws, Christmas decorations and many other items. You can use different painting techniques such as stamping, cut-outs and stencilling.Colourist Heat Transfer Paints should be printed onto 100% synthetic surfaces for the most vibrant, colourfast effects. Use polyester or acrylic for the best results. Mixed fibres can be used - the higher the synthetic content, the stronger the printed colours will be.

This Painting On Glass Discovery Set contains:

6 x 20ml Assorted Vitrail Colours (crimson, lemon, orange, chartreuse green, sky blue and gold).

Product Usage: • PEBEO’s Vitrail opaque is applied with a brush or a sponge to all carefully degreased surfaces. • Mix the colours thoroughly with a stick prior to use. • Can be used with Vitrail transparent colours for creating contrasts between transparency and opacity. • Vitrail Opaque colours may also be used with the bowl technique. • Can be used with VITRAIL Cerne Relief outliners. • Objects decorated with Vitrail colours should not be considered for practical usage and are intended for decorative purposes only. Furthermore only surfaces not destined to be put in contact with food should be decorated. • Keep out of reach of children. If swallowed seek prompt medical attention and present the packaging or label.

Fantasy Prisme are opaque, Alkyd oil-based colours that dry to reveal a stunning honeycomb effect and a pearlescent finish. The effect will become visible as the paint dries over the course of 5 to 10 minutes. There are 28 colours available, all with a good lightfastness.Fantasy Prisme colours are ready-to-use and mixable with each other and other paint ranges, such as Vitrail, Ceramic, Cerne Relief, Studio Acrylics and Gédéo resins. This provides a the opportunity to experiment widely on flat horizontal surfaces.

Quality:

Transparent, intense and very bright colour. Solvent based, ready to use. Good lightfastness. Use with the cerne relief.

Colour mixability:

Colours can be mixed together.

Drying:

Tack-free in one hour, fully dry in 8 hours if led in thin coats.

Surfaces:

Glass, polyester, acetate ..

Thinner:

Odourless mineral spirit or white spirit.

Opacity:

Transparent and opaque colours

Finish:

Brilliant.

Pébéo's Vitrail is applied with a brush to all carefully degreased transparent surfaces : glass, acetate, polyester, plexiglas.

Product Usage: • Objects decorated with Vitrail colours should not be considered for practical usage and are intended for decorative purposes only. Furthermore only surfaces not destined to be put in contact with food should be decorated. • Keep out of reach of children. If swallowed seek prompt medical attention and present the packaging or label.

Pebeo Marbling consists of 9 colours and 1 thickening powder to carry out the art of marbling easily on fabric, paper or any other light base. The technique of marbling used with Pebeo colours is a simplified and modernized bath technique.

Pebeo Marbling consists of 9 colours and 1 thickening powder to carry out the art of marbling easily on fabric, paper or any other light base. The technique of marbling used with Pebeo colours is a simplified and modernized bath technique.

Pebeo Marbling consists of 9 colours and 1 thickening powder to carry out the art of marbling easily on fabric, paper or any other light base. The technique of marbling used with Pebeo colours is a simplified and modernized bath technique.

Properties:QUALITY: Fine, broad or "brush" tipped markes for fabric.COLOUR COLOUR MIXABILITY: YesDRYING: Air dry for 30 minutes.SURFACES: All fabrics.Opacity: Transparent colours. Finish: Matt.FIXING: with an iron (cotton position), pressing for 2 to 3 minutes on the reverse side of the decorated fabric.CARING (decorated fabric): 48 hours after fixing, the colours are resistant to washing machine at 40°C (100°F).NUMBER OF COLOURS: 18 colours.STORAGE: store the markers flat wise.STANDARDS: Conforms to European toy safety standard 71. Security cap.Product Usage: Setaskrib+ felt tip markers for fabrics, are particularly practical for decorating T-shirts and cottons. The different tips can be used to produce various lines and effects and for outlining letters.

Properties :QUALITY: Deep and glossy, transparent or opaque, with a superb enamelled appearance after baking. The range includes 10 shimmering colours, twinkling and iridescent effects, particularly opaque and covering. Excellent lightfastness.COLOUR MIXABILITY: Colours can be mixed together.DRYING: Tack free in a few minutes, fully dry in a minimum of 24 hours. Baking all colours and auxiliary products in the range : 35 minutes at 150°C (300°F) in domestic oven, after minimum 24 hours drying. For the markers: Allow to air dry 72 hours for decorative use with light washing and no soaking.Product Usage :Porcelaine 150 can be applied to all heat-stable bases that are able to withstand a temperature of 150°C (300°F), such as porcelain, china, glazed earthenware, terracotta, metal, enameled sheet steel, copper and glass. The choice of base enables numerous effects to be produced and experiments to be made with the transparency and intensity of the colours. Porcelaine 150 makes professional enameling available to all, with a new generation of 46 colours, glazed by simply baking at 150°C (300°F) in any domestic oven. In bottle, tube and marker, which can be mixed together, deep and glossy, transparent or opaque, with a superb enameled appearance after baking. Many applications are possible with Porcelaine 150: with brushes and also with sponge and stencil. The Porcelaine 150 outliners, in tube with nozzle, can be used for outlining work and screen printing. The markers are recommended for lines and writing. Shake well before use. Press tip repeatedly to start ink flow. Allow to air dry 72 hours for decorative use with light washing and no soaking. For dishwasher resistance, allow to air dry 24 hour after application then bake in oven for 35 minutes at 150°C (300°F). Store flatwise. Keep away from freezing.

Properties :QUALITY: Deep and glossy, transparent or opaque, with a superb enamelled appearance after baking. The range includes 10 shimmering colours, twinkling and iridescent effects, particularly opaque and covering. Excellent lightfastness.COLOUR MIXABILITY: Colours can be mixed together.DRYING: Tack free in a few minutes, fully dry in a minimum of 24 hours. Baking all colours and auxiliary products in the range : 35 minutes at 150°C (300°F) in domestic oven, after minimum 24 hours drying. For the markers: Allow to air dry 72 hours for decorative use with light washing and no soaking.Product Usage :Porcelaine 150 can be applied to all heat-stable bases that are able to withstand a temperature of 150°C (300°F), such as porcelain, china, glazed earthenware, terracotta, metal, enameled sheet steel, copper and glass. The choice of base enables numerous effects to be produced and experiments to be made with the transparency and intensity of the colours. Porcelaine 150 makes professional enameling available to all, with a new generation of 46 colours, glazed by simply baking at 150°C (300°F) in any domestic oven. In bottle, tube and marker, which can be mixed together, deep and glossy, transparent or opaque, with a superb enameled appearance after baking. Many applications are possible with Porcelaine 150: with brushes and also with sponge and stencil. The Porcelaine 150 outliners, in tube with nozzle, can be used for outlining work and screen printing. The markers are recommended for lines and writing. Shake well before use. Press tip repeatedly to start ink flow. Allow to air dry 72 hours for decorative use with light washing and no soaking. For dishwasher resistance, allow to air dry 24 hour after application then bake in oven for 35 minutes at 150°C (300°F). Store flatwise. Keep away from freezing.

Fantasy Prisme are opaque, Alkyd oil-based colours that dry to reveal a stunning honeycomb effect and a pearlescent finish. The effect will become visible as the paint dries over the course of 5 to 10 minutes. There are 28 colours available, all with a good lightfastness.Fantasy Prisme colours are ready-to-use and mixable with each other and other paint ranges, such as Vitrail, Ceramic, Cerne Relief, Studio Acrylics and Gédéo resins. This provides a the opportunity to experiment widely on flat horizontal surfaces.

QUALITY: Water-based paste in 20ml tube with nozzle. Finish: Brilliant. DRYING: 1 hour to the touch, 24 hours to dry completely. CLEANING DECORATED ITEMS: After drying, the dimensional paint may be lightly washed without soaking. Resistant to window cleaners. CLEANING THE BRUSHES: With soap.

Properties:QUALITY: Opaque and very bright, solvent based colours, ideal for decorating ceramics. Very good lightfastness.COLOUR MIXABILITY: YesDRYING: Oxidation in air. The colours are dry "dust free" in 3 hours at heart after 48 hours.SURFACES: Terracotta, ceramicTHINNER: Odourless mineral spirit or white spiritOpacity: Opaque Finish: BrilliantCARING (decorated supports): After drying, the colours are resistant to scratching and washing in cold water without soaking.BRUSHES: Pébéo Cobra deco or Iris brushesBRUSH CLEANING: Odourless mineral spirit or white spirit.Product Usage:The Ceramic colours are ideal on terracotta and earthenware. To maximize the brightness on porous surfaces it is recommended to apply, prior to painting, a filler undercoat. On rounded surfaces, be careful not to overload to avoid runs. Ceramic colours can be applied with brush, sponge, screen or bath. A sufficiently thick layer of colour can be combined with another material like sand or engraved with a stick. Objects decorated with Ceramic colours are for decorative use only. Always clean brushes thoroughly with white spirit or odourless mineral spirit, then rinse with soapy water.

Properties :QUALITY: Deep and glossy, transparent or opaque, with a superb enamelled appearance after baking. The range includes 10 shimmering colours, twinkling and iridescent effects, particularly opaque and covering. Excellent lightfastness.COLOUR MIXABILITY: Colours can be mixed together.DRYING: Tack free in a few minutes, fully dry in a minimum of 24 hours. Baking all colours and auxiliary products in the range : 35 minutes at 150°C (300°F) in domestic oven, after minimum 24 hours drying. For the markers: Allow to air dry 72 hours for decorative use with light washing and no soaking.Product Usage :Porcelaine 150 can be applied to all heat-stable bases that are able to withstand a temperature of 150°C (300°F), such as porcelain, china, glazed earthenware, terracotta, metal, enameled sheet steel, copper and glass. The choice of base enables numerous effects to be produced and experiments to be made with the transparency and intensity of the colours. Porcelaine 150 makes professional enameling available to all, with a new generation of 46 colours, glazed by simply baking at 150°C (300°F) in any domestic oven. In bottle, tube and marker, which can be mixed together, deep and glossy, transparent or opaque, with a superb enameled appearance after baking. Many applications are possible with Porcelaine 150: with brushes and also with sponge and stencil. The Porcelaine 150 outliners, in tube with nozzle, can be used for outlining work and screen printing. The markers are recommended for lines and writing. Shake well before use. Press tip repeatedly to start ink flow. Allow to air dry 72 hours for decorative use with light washing and no soaking. For dishwasher resistance, allow to air dry 24 hour after application then bake in oven for 35 minutes at 150°C (300°F). Store flatwise. Keep away from freezing.

Colourist Heat Transfer Paints allow you to create multi-coloured designs without specialist equipment. Using just a domestic iron you can print onto fabric, bags, Tshirts, coasters, placemats, bunting, tiles, jigsaws, Christmas decorations and many other items. You can use different painting techniques such as stamping, cut-outs and stencilling.Colourist Heat Transfer Paints should be printed onto 100% synthetic surfaces for the most vibrant, colourfast effects. Use polyester or acrylic for the best results. Mixed fibres can be used - the higher the synthetic content, the stronger the printed colours will be.

Fantasy Prisme are opaque, Alkyd oil-based colours that dry to reveal a stunning honeycomb effect and a pearlescent finish. The effect will become visible as the paint dries over the course of 5 to 10 minutes. There are 28 colours available, all with a good lightfastness.Fantasy Prisme colours are ready-to-use and mixable with each other and other paint ranges, such as Vitrail, Ceramic, Cerne Relief, Studio Acrylics and Gédéo resins. This provides a the opportunity to experiment widely on flat horizontal surfaces.

Product Usage :Porcelaine 150 can be applied to all heat-stable bases that are able to withstand a temperature of 150°C (300°F), such as porcelain, china, glazed earthenware, terracotta, metal, enameled sheet steel, copper and glass. The choice of base enables numerous effects to be produced and experiments to be made with the transparency and intensity of the colours. Porcelaine 150 makes professional enameling available to all, with a new generation of 46 colours, glazed by simply baking at 150°C (300°F) in any domestic oven. In bottle, tube and marker, which can be mixed together, deep and glossy, transparent or opaque, with a superb enameled appearance after baking. Many applications are possible with Porcelaine 150: with brushes and also with sponge and stencil. The Porcelaine 150 outliners, in tube with nozzle, can be used for outlining work and screen printing. For dishwasher resistance, allow to air dry 24 hour after application then bake in oven for 35 minutes at 150°C (300°F). Store flatwise. Keep away from freezing.

Properties:QUALITY: Fine, broad or "brush" tipped markes for fabric.COLOUR COLOUR MIXABILITY: YesDRYING: Air dry for 30 minutes.SURFACES: All fabrics.Opacity: Transparent colours. Finish: Matt.FIXING: with an iron (cotton position), pressing for 2 to 3 minutes on the reverse side of the decorated fabric.CARING (decorated fabric): 48 hours after fixing, the colours are resistant to washing machine at 40°C (100°F).NUMBER OF COLOURS: 18 colours.STORAGE: store the markers flat wise.STANDARDS: Conforms to European toy safety standard 71. Security cap.Product Usage: Setaskrib+ felt tip markers for fabrics, are particularly practical for decorating T-shirts and cottons. The different tips can be used to produce various lines and effects and for outlining letters.

Properties :QUALITY: Deep and glossy, transparent or opaque, with a superb enamelled appearance after baking. The range includes 10 shimmering colours, twinkling and iridescent effects, particularly opaque and covering. Excellent lightfastness.COLOUR MIXABILITY: Colours can be mixed together.DRYING: Tack free in a few minutes, fully dry in a minimum of 24 hours. Baking all colours and auxiliary products in the range : 35 minutes at 150°C (300°F) in domestic oven, after minimum 24 hours drying. For the markers: Allow to air dry 72 hours for decorative use with light washing and no soaking.Product Usage :Porcelaine 150 can be applied to all heat-stable bases that are able to withstand a temperature of 150°C (300°F), such as porcelain, china, glazed earthenware, terracotta, metal, enameled sheet steel, copper and glass. The choice of base enables numerous effects to be produced and experiments to be made with the transparency and intensity of the colours. Porcelaine 150 makes professional enameling available to all, with a new generation of 46 colours, glazed by simply baking at 150°C (300°F) in any domestic oven. In bottle, tube and marker, which can be mixed together, deep and glossy, transparent or opaque, with a superb enameled appearance after baking. Many applications are possible with Porcelaine 150: with brushes and also with sponge and stencil. The Porcelaine 150 outliners, in tube with nozzle, can be used for outlining work and screen printing. The markers are recommended for lines and writing. Shake well before use. Press tip repeatedly to start ink flow. Allow to air dry 72 hours for decorative use with light washing and no soaking. For dishwasher resistance, allow to air dry 24 hour after application then bake in oven for 35 minutes at 150°C (300°F). Store flatwise. Keep away from freezing.

Properties :QUALITY: Deep and glossy, transparent or opaque, with a superb enamelled appearance after baking. The range includes 10 shimmering colours, twinkling and iridescent effects, particularly opaque and covering. Excellent lightfastness.COLOUR MIXABILITY: Colours can be mixed together.DRYING: Tack free in a few minutes, fully dry in a minimum of 24 hours. Baking all colours and auxiliary products in the range : 35 minutes at 150°C (300°F) in domestic oven, after minimum 24 hours drying. For the markers: Allow to air dry 72 hours for decorative use with light washing and no soaking.Product Usage :Porcelaine 150 can be applied to all heat-stable bases that are able to withstand a temperature of 150°C (300°F), such as porcelain, china, glazed earthenware, terracotta, metal, enameled sheet steel, copper and glass. The choice of base enables numerous effects to be produced and experiments to be made with the transparency and intensity of the colours. Porcelaine 150 makes professional enameling available to all, with a new generation of 46 colours, glazed by simply baking at 150°C (300°F) in any domestic oven. In bottle, tube and marker, which can be mixed together, deep and glossy, transparent or opaque, with a superb enameled appearance after baking. Many applications are possible with Porcelaine 150: with brushes and also with sponge and stencil. The Porcelaine 150 outliners, in tube with nozzle, can be used for outlining work and screen printing. The markers are recommended for lines and writing. Shake well before use. Press tip repeatedly to start ink flow. Allow to air dry 72 hours for decorative use with light washing and no soaking. For dishwasher resistance, allow to air dry 24 hour after application then bake in oven for 35 minutes at 150°C (300°F). Store flatwise. Keep away from freezing.

The Discovery Set contains 6x20ml Assorted Porcelaine 150 Colours:

Ivory

Anthracite Black

Scarlet Red

Lemon

Lapis Blue

Olivine Green

Roberson Liquid Metals have a rich deep colour and are ideal for a range of applications and surfaces. All colours are intermixable and can be used on surfaces such as plaster, wood, paper & canvas. The paint gives the appearance of metal but will not tarnish and is not required to be varnished.

Roberson Liquid Metals are creamy acrylic colours that can be used on most surfaces including plaster, wood, paper & canvas. The rich, deep colour gives the appearance of metal but it will not tarnish and is not required to be varnished.

The 24 colour range includes 13 shades of gold, brass and bronze; eight shades of silver, pewter and platinum; a steel, a graphite and an interference, glittery colour (called Twinkle).
All colours are intermixable with each other and other acrylic paints. When mixed they add both their colour and their sparkle to other acrylic paints.

The colours are all transparent but in thicker applications they can cover quite well. The paints can be thinned with water and as the paint becomes more transparent the metallic shimmer is still visible. Clean up is with soap and water. If you intend to paint large things, the pots list the paint’s coverage as: 7 square metres per litre

Speciality Colours
Two of the 24 colour range are slightly different to the rest and have slightly different prices:

Twinkle: This variation of liquid metals produces colour changing effects with a hint of glitter. The use of different backgrounds will change the effects, for example dark backgrounds will show the glitter properties whereas light backgrounds provide a colour changing effect dependant on angle of view. It can be added to other colours to create a range of interesting effects.

Solid Silver: This variation of Liquid Metals differs from other silver shades within the range as it contains aluminium particles – this makes the liquid metal more opaque to provide excellent coverage.

Roberson Liquid Metals have a rich deep colour and are ideal for a range of applications and surfaces. All colours are intermixable and can be used on surfaces such as plaster, wood, paper & canvas. The paint gives the appearance of metal but will not tarnish and is not required to be varnished.

Roberson Liquid Metals are creamy acrylic colours that can be used on most surfaces including plaster, wood, paper & canvas. The rich, deep colour gives the appearance of metal but it will not tarnish and is not required to be varnished.

The 24 colour range includes 13 shades of gold, brass and bronze; eight shades of silver, pewter and platinum; a steel, a graphite and an interference, glittery colour (called Twinkle).
All colours are intermixable with each other and other acrylic paints. When mixed they add both their colour and their sparkle to other acrylic paints.

The colours are all transparent but in thicker applications they can cover quite well. The paints can be thinned with water and as the paint becomes more transparent the metallic shimmer is still visible. Clean up is with soap and water. If you intend to paint large things, the pots list the paint’s coverage as: 7 square metres per litre

Speciality Colours
Two of the 24 colour range are slightly different to the rest and have slightly different prices:

Twinkle: This variation of liquid metals produces colour changing effects with a hint of glitter. The use of different backgrounds will change the effects, for example dark backgrounds will show the glitter properties whereas light backgrounds provide a colour changing effect dependant on angle of view. It can be added to other colours to create a range of interesting effects.

Solid Silver: This variation of Liquid Metals differs from other silver shades within the range as it contains aluminium particles – this makes the liquid metal more opaque to provide excellent coverage.

Roberson Liquid Metals have a rich deep colour and are ideal for a range of applications and surfaces. All colours are intermixable and can be used on surfaces such as plaster, wood, paper & canvas. The paint gives the appearance of metal but will not tarnish and is not required to be varnished.

Roberson Liquid Metals are creamy acrylic colours that can be used on most surfaces including plaster, wood, paper & canvas. The rich, deep colour gives the appearance of metal but it will not tarnish and is not required to be varnished.

The 24 colour range includes 13 shades of gold, brass and bronze; eight shades of silver, pewter and platinum; a steel, a graphite and an interference, glittery colour (called Twinkle).
All colours are intermixable with each other and other acrylic paints. When mixed they add both their colour and their sparkle to other acrylic paints.

The colours are all transparent but in thicker applications they can cover quite well. The paints can be thinned with water and as the paint becomes more transparent the metallic shimmer is still visible. Clean up is with soap and water. If you intend to paint large things, the pots list the paint’s coverage as: 7 square metres per litre

Speciality Colours
Two of the 24 colour range are slightly different to the rest and have slightly different prices:

Twinkle: This variation of liquid metals produces colour changing effects with a hint of glitter. The use of different backgrounds will change the effects, for example dark backgrounds will show the glitter properties whereas light backgrounds provide a colour changing effect dependant on angle of view. It can be added to other colours to create a range of interesting effects.

Solid Silver: This variation of Liquid Metals differs from other silver shades within the range as it contains aluminium particles – this makes the liquid metal more opaque to provide excellent coverage.