4-ch 1080p Lite Mini 1U H.265 DVR
H.265 Pro+/H.265 Pro/H.265 video compression
HDTVI/AHD/CVI/CVBS/IP video input
Audio via coaxial cable
Up to 5-ch IP camera input (up to 1080p)
Encoding ability up to 1080p lite @ 25/30 fps
Max. 1200 m for 720p HDTVI signal


Recording
Video Compression
H.265 Pro+/H.265 Pro/H.265/H.264+/H.264
Encoding Resolution
When 1080p lite mode not enabled: 720p/WD1/4CIF/VGA/CIF

When 1080p lite mode enabled: 1080p Lite/HD 720p Lite/WD1/4CIF/VGA/CIF

Frame Rate
Main stream:

When 1080p Lite mode not enabled:

For 720p stream access: 720p/WD1/4CIF/VGA/CIF@25 fps (P)/30 fps (N)

When 1080p Lite mode enabled:

1080p Lite/HD 720p Lite/WD1/4CIF/VGA/CIF@25 fps (P)/30 fps (N)

Sub-stream:

4CIF/CIF/QVGA@25 fps (P)/30 fps (N)

Video Bitrate
32 Kbps to 4 Mbps
Stream Type
Video, Video & Audio
Audio Compression
G.711u
Audio Bitrate
64 Kbps
Video And Audio
IP Video Input
1-ch (up to 5-ch)

Up to 1080p resolution

Support H.265+/H.265/H.264+/H.264 IP cameras

Analog Video Input
4-ch

BNC interface (1.0 Vp-p, 75 `d9), supporting coaxitron connection

HDMI Output
1-ch, 1920 `d7 1080/60Hz, 1280 `d7 1024/60Hz, 1280 `d7 720/60Hz, 1024 `d7 768/60Hz

HDMI/VGA simultaneous output

VGA Output
1-ch, 1920 `d7 1080/60Hz, 1280 `d7 1024/60Hz, 1280 `d7 720/60Hz, 1024 `d7 768/60Hz

HDMI/VGA simultaneous output

CVBS Input
Support
Synchronous Playback
4-ch
AHD Input
1080p25, 1080p30, 720p25, 720p30
HDCVI Input
1080p25, 1080p30, 720p25, 720p30
Audio Output
1-ch, RCA (Linear, 1 K`d9)
Audio Input
1-ch RCA (2.0 Vp-p, 1 K`d9)

4-ch via coaxial cable

Two-Way Audio
Reuse the first audio input
Network
Network Protocol
TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP`99, HTTPS
Remote Connection
32
Network Interface
1, RJ45 10/100 Mbps self-adaptive Ethernet interface
Auxiliary Interface
SATA
1 SATA interface
Capacity
Up to 4 TB capacity for each disk
USB Interface
Rear panel: 2 `d7 USB 2.0
Alarm In/Out
N/A
General
Power Supply
12 VDC, 1.5 A
Consumption
≤ 16 W
Working Temperature
-10 `b0C to 55 `b0C (14 `b0F to +31 `b0F)
Working Humidity
10% to 90%
Dimension (W `d7 D `d7 H)
200 `d7 200 `d7 45 mm (7.9 `d7 7.9 `d7 1.8 inch)
≤ 0.8 kg (1.8 lb)

Specifications:
Color: White
Material: Plastic
Operating temperature range: From -10°С to +40°С
Operating humidity: Up to 75%

Ajax VHF Bridge Black is a transponder that provides a hub with an additional channel to communicate with a monitoring station.

With Ajax VHF Bridge Black you can use Ajax systems in cities where Internet connection is unstable, in nature reserves, mountain and desert areas

Specifications:

Transponder for communication with the monitoring station via a VHF transmitter
Number of potential outputs: 8
Output types: Positive trip and negative trip (depends on the settings)
Transmission types: Pulse and bistable (depends on the settings)
Compatible with Ajax central units: Operates with Hub 2, Hub Plus, Hub 2 Plus
vhfBridge connects to any VHF transmitter with relay inputs
Primary power supply: 100–240 V, 50/60 Hz
Backup power supply: 12 V DC, up to 75 hours of power for a transponder and a transmitter
VHF transmitter power: 12 V DC, 2 A

Ajax Wireless alarm button/smart button

Button immediately notifies an alarm monitoring company about the intrusion, gas leak, or fire. Moreover, it can request medical help and inform relatives about a sudden health deterioration in just one click. In the panic mode, the device supports 4 types of alarms. They define the event's code sent to an alarm monitoring company and the notification text received by users. An accurate alarm response is guaranteed. Moreover, Button can manage smart home appliances by activating scenarios with a single or double clicks.


Specifications:

Operates with: Hub, ReX featuring OS Malevich 2.7.102 and later
Number of buttons: 1
Adjustable alarm types
Communication range with a hub — up to 1300 m in an open area
Two-way communication channel
Operating frequencies — 868.0–868.6 MHz
Self-adjusting RF output power — up to 20 mW
Block encryption based on AES algorithm
Frequency hopping
Battery: CR2032 battery
Power supply voltage: 3 V

1. Design: Solar panel, Battery, LED panel are all in One Integrated Desgn
2. Solar panel: High efficiency Poly Crystalline solar cell
3. LED: High quality LED 2000 lumen/W
4. Battery : A graded Li-ion battery No.18650
5. PIR :Motion sensor distance over 7M
6. Waterproof: IP65
7. Material : Aluminum Alloy + Tempered Glass
8. ALS ( Adaptive lighting system) 2.0 for up to 10 days lighting even in rainy conditions.
9. Remote functionality
10. Luminous Flux: 3000 Lumen

The Ajax MotionProtect Plus White is a wireless indoor motion detector that detects human presence by temperature difference with background thermal radiation due to the microwave sensor.

Designed for rooms with air conditioners, fireplaces and where there is a likelihood of light flickering, glare and reflections, eliminating false alarms due to draughts or movement of curtains and blinds.

The MotionProtect Plus can operate for up to 5 years from a builtin battery and monitors the area within a 12meter radius. It ignores animals, while recognizing a human from the first step.

Product Code: 8227.02.WH1

Please note: MotionProtect Plus operates within the Ajax system, connected to the hub via the protected Jeweller protocol.

Compatible with Hub, Hub Plus, Ajax ReX, Ajax ocBridge Plus and Ajax uartBridge.


FEATURES OF THE AJAX MOTIONPROTECT PLUS:
Wireless indoor motion detector
Builtin battery (lasts up to 5 years)
Monitors an area within a 12m radius
Communication range of 1200m (in an open space/line of sight)
Pet Immune (ignores pets with weight of up to 20 kg and height up to 50 cm)
Detector can be used as a part of thirdparty security central units via the uartBridge or ocBridge Plus integration modules.
Detector is set up via the Ajax app for iOS, Android, macOS and Windows
System notifications delivered via push notifications, SMS and calls (if activated).
Quick and Easy installation
Authentication to prevent forgery
Jamming detection and communication channels encryption
Tampering alarm


INSTALLATION AND SETUP
The Ajax MotionProtect Plus comes ready to operate straight out the box.

The battery is preinstalled, so there is no need to disassemble the detector. The Ajax MotionProtect Plus can be mounted on the SmartBracket in just a few minutes.

Connect the MotionProtect to the hub via the mobile application.


SPECIFICATIONS OF THE AJAX MOTIONPROTECT PLUS:
Compatibility: Operates only with Hub, Hub Plus, Ajax ReX, Ajax ocBridge Plus and Ajax uartBridge
Classification: Electrooptical combined radio channel security detector
Type of detector: Wireless
Installation method: Indoors
Sensing element: PIR sensor, microwave sensor (24 GHz)
Alarm signal delivery time: 0.15 s
Motion detection distance: Up to 12 m
Detection angles: Horizontal: 88.5° and Vertical: 80°
Timer of motion detection: From 0.3 to 2 m/s
Sensitivity: Adjustable, 3 levels
Recommended installation height: 2.4 m
Pet immunity: Weight: Up to 20 kg and Height: Up to 50 cm
Power supply: CR123A battery, 3V
Battery life: Up to 5 years
Communication range with central unit: Up to 1,200 m in an open space
Twoway communication between devices: Yes
Operating frequencies: 868.0868.6 MHz
Selfadjusting RF output power: Up to 20 mW
Block encryption based on AES algorithm: Yes
Detector polling period: 12−300 s
Temperature sensor: Available
Operating temperature range: From 10°С to +40°С
Permissible humidity: Up to 75%
Remote setting and testing: Yes
Certification: Grade 2, CE
Product Dimensions: 110 mm х 65 mm × 50 mm
Product Weight: 96g

The Ajax CombiProtect White is an indoor wireless combined motion and glass break detector. The device helps to secure the room from intruders entering through doors and windows and monitors the current state of the glass.

It can ignore animals and detects a person within the protected zone from the first step.

Product Code: 7170.06.WH1

Please note: CombiProtect operates within the Ajax system, connected to the hub via the protected Jeweller protocol.

Compatible with Hub, Hub Plus, Ajax ReX, Ajax ocBridge Plus and Ajax uartBridge.


FEATURES OF THE AJAX COMBIPROTECT:
Wireless indoor combined motion and glass break detector
Detects motion at a distance of up to 12 m and breakage at up to 9 m
Builtin battery (lasts up to 5 years)
Communication range of 1200m (in an open space/line of sight)
Pet Immune (ignores pets with weight of up to 20 kg and height up to 50 cm)
Filters false alarms caused by thunder, dogs barking or the sound of passing trucks.
Detector can be used as a part of thirdparty security central units via the uartBridge or ocBridge Plus integration modules.
Detector is set up via the Ajax app for iOS, Android, macOS and Windows
System notifications delivered via push notifications, SMS and calls (if activated).
Quick and Easy installation
The Ajax system is selfsustaining, but the user can connect it to the central monitoring station of a private security company.


INSTALLATION AND SETUP
The Ajax CombiProtect comes ready to operate straight out the box.

The battery is preinstalled, so there is no need to disassemble the detector. It can be mounted on the SmartBracket in just a few minutes and with one click, the Ajax Wireless CombiProtect can be connected to the hub in the mobile application.


SPECIFICATIONS OF THE AJAX COMBIPROTECT:
Compatibility: Operates only with Hub, Hub Plus, Ajax ReX, Ajax ocBridge Plus and Ajax uartBridge
Classification: Electrooptical combined radio channel security detector
Type of detector: Wireless
Installation method: Indoors
Sensing element: PIR sensor, electret microphone
Alarm signal delivery time: 0.15 s
Motion detection distance: Up to 12 m
Detection angles: Horizontal: 88.5° and Vertical: 80°
Time for motion detection: From 0.3 to 2 m/s
Recommended installation height: 2.4 m
Pet immunity: Weight: Up to 20 kg and Height: Up to 50 cm
Break detection distance: Up to 9 m
Detection angle: 180°
Sensitivity: Adjustable, 3 levels
Power supply: CR123A battery, 3V
Battery life: Up to 5 years
Communication range with central unit: Up to 1,200 m in an open space
Twoway communication between devices: Yes
Operating frequencies: 868.0868.6 MHz
Selfadjusting RF output power: Up to 20 mW
Block encryption based on AES algorithm: Yes
Detector polling period: 12−300 s
Tampering alarm: Yes
Frequency hopping: Yes
Protection against forgery: Yes
Temperature sensor: Available
Operating temperature range: From 10°С to +40°С
Permissible humidity: Up to 75%
Remote setting and testing: Yes
Certification: Grade 2, CE
Product Dimensions: 110 mm х 65 mm × 50 mm
Product Weight: 92g

The Ajax MotionProtect is a wireless indoor motion detector that detects human presence by using a passive IR sensor. It can operate for up to 5 years from a builtin battery and monitors the area within a 12meter radius. MotionProtect ignores animals, while recognizing a human from the first step.

Product Code: 5314.09.BL1

Please note: MotionProtect operates within the Ajax system, connected to the hub via the protected Jeweller protocol.

Compatible with all Ajax hubs, Ajax ReX, Ajax ocBridge Plus and Ajax uartBridge.


FEATURES OF THE AJAX MOTIONPROTECT:
Wireless motion detector
Builtin battery (lasts up to 5 years)
Monitors an area within a 12m radius
Communication range of 1700m (in an open space/line of sight)
Pet Immune (ignores pets with weight of up to 20 kg and height up to 50 cm)
Accurately detects motion in heat conditions, even at a temperature of +40°С
Detector can be used as a part of thirdparty security central units via the uartBridge or ocBridge Plus integration modules.
Detector is set up via the Ajax app for iOS, Android, macOS and Windows
System notifications delivered via push notifications, SMS and calls (if activated).
Quick and Easy installation
Authentication to prevent forgery
Jamming detection and communication channels encryption
Tampering alarm


INSTALLATION AND SETUP
The Ajax MotionProtect comes ready to operate straight out the box.

The battery is preinstalled, so there is no need to disassemble the detector. The Ajax MotionProtect can be mounted on the SmartBracket in just a few minutes and fastened to the wall in front of the doors and other places likely of intruder entry.

Connect the MotionProtect to the hub via the mobile application.


SPECIFICATIONS OF THE AJAX MOTIONPROTECT:
Compatibility: Operates with all Ajax hubs, Ajax ReX, Ajax ocBridge Plus and Ajax uartBridge
Classification: Electrooptical combined radio channel security detector
Type of detector: Wireless
Installation method: Indoors
Sensing element: PIR sensor
Alarm signal delivery time: 0.15 s
Motion detection distance: Up to 12 m
Detection angles: Horizontal 88.5° & Vertical 80°
Time for motion detection: From 0.3 to 2 m/s
Sensitivity: Adjustable, 3 levels
Recommended installation height: 2.4 m
Pet immunity: Weight Up to 20 kg & Height Up to 50 cm
Power supply: CR123A battery, 3V
Battery life: Up to 5 years
Communication range with central unit: Up to 1,700 m in an open space
Twoway communication between devices: Yes
Operating frequencies: 868.0—868.6 MHz
Selfadjusting RF output power: Up to 20 mW
Block encryption based on AES algorithm: Yes
Device polling period: 12−300 s
Temperature sensor: Available
Operating temperature range: From 10°С to +40°С
Permissible humidity: Up to 75%
Remote setting and testing: Yes
Certification: Grade 2, CE
Product Dimensions: 110 mm х 65 mm × 50 mm
Product Weight: 86g

The Ajax MotionProtect Curtain is a curtain type wireless motion detector with a narrow horizontal detection angle designed for indoor perimeter control of windows, doorways, passages, other entrances or exits and valued goods i.e expensive artworks, sculptures etc.

The Ajax MotionProtect Curtain allows you to secure the perimeter of your house whilst freely moving around indoors and if setup correctly can ignore pets, even if you own a Saint Bernard.

Please note: MotionProtect Curtain integrates into Ajax systems, connecting to the hub via the protected Jeweller protocol.

The Ajax MotionProtect Curtain is compatible with all Ajax hubs and Ajax ReX

Product Code: 13268.36.WH1


FEATURES OF THE AJAX MOTIONPROTECT CURTAIN:
Wireless Indoor Motion Detector
Builtin battery (lasts up to 3 years)
Detects motion with a range of up to 15 meters
Wireless coverage may reach up 1,700 m lineofsight.
Detector will continue to operate even if the temperature drops to 10°C.
Detector is set up via the Ajax app for iOS or Android
System notifications delivered via push notifications, SMS and calls (if activated).
Quick and Easy installation
Ajax can be connected to the central monitoring station of a security company.


INSTALLATION AND SETUP
The Ajax MotionProtect Curtain comes ready to operate straight out the box.

The battery is preinstalled, so there is no need to disassemble the detector. The Ajax MotionProtect Curtain connects to the security system via the Ajax app, simply scan the QR code, add the detector to the room, and proceed to installation.


SPECIFICATIONS OF THE AJAX MOTIONPROTECT CURTAIN:
Compatible: Operates with all Ajax hubs and Ajax ReX
Classification: Radiointerlinked photoelectric security detector
Type of detector: Wireless
Motion detection distance: Adjustable (from 6 m to 15 m)
Installation: Indoors only
Sensing element: Two PIR sensors
False alarm reduction: Available, Correlation Signal Processing
Alarm signal delivery time: 0.15 seconds
Detection angles: Horizontally: 6° & Vertically: 90°
Time for motion detection: From 0.3 to 2 m/s
Sensitivity: Adjustable, 3 levels
Recommended installation height: 2.4 meters
Power supply: CR123A, 3V
Battery life: Up to 3 years
Communication range with detectors: Up to 1,700 m in an open space
Twoway communication between devices: Yes
Operating frequencies: 868.0 868.6 MHz
Selfadjusting RF output power: Up to 20 mW
Block encryption based on AES algorithm: Yes
Detector polling period: 12−300 s
Frequency hopping: Yes
Temperature sensor: Available
Operating temperature range: From −10°С to +40°С
Operating humidity: Up to 95%
Fraud protection: Yes
Jamming notification: Yes
Tamperresistant: Yes
Remote configuration and testing: Yes
Protection class: IP54
Product Dimensions: 134 mm х 44 mm х 34 mm
Product Weight: 118g

Product Code: 1195ACC001
The Centurion D2 Turbo Theft resistant cage is designed to significantly reduce the risk of an intruder gaining access to the motor and increases the resistance of the unit against theft. Manufactured from 304 brushed stainless steel, it will not only enhance the security of your entrance but will add to the aesthetic appeal too.

It is important that the theft resistant cage is properly fitted as per the instructions given and that a suitable lock is fitted. Please note that a lock is not supplied with this unit. Iotrend recommends using a discus-type lock.

SPECIFICATIONS
Brand: Centurion
Material: 304 Brushed stainless steel
Bracket applications: Centurion D2 Turbo
Anti Theft Bracket only - Lock and Gate Motor not included. 

The Centurion D10 SMART Sliding Gate Motor Kit includes 2 x Securi-Prod 12V 7.2AH batteries, 2 x Centurion Nova 4 Button Remotes, 2 x 2 meters steel rack and Centurion D10 SMART anti-theft bracket. The D10 Smart is a legendary high-volume performer for sliding gates up to 1000kg. The D10 SMART now offers you speed, security, endurance and reliability, quicker and easier than with any other gate motor in the D10's class, thanks to SMART technology and wireless connectivity. The intelligent choice in residential, commercial and industrial gate automation. Now with award-winning SMART technology and with its powerful 24V motor and die-cast aluminium gearbox, the D10 SMART sliding gate motor packs a potential punch, providing excellent security on sites ranging from residential properties, townhouse complexes, residential estates, busy office parks and warehouse facilities.

Specifications
Brand: Centurion
Model: D10 SMART
Compatible remotes: Nova 1 Button, 2 Button and 4 Button(2 Included)
Compatible backup batteries: Securi-Prod 12v 7.2Amp(2 Included) and Securi-Prod 12V 8Amp batteries
Compatible controller PCB: SmartX controller
Compatible antitheft bracket: D10 SMART Bracket
Compatible safety beams: Photon SMART wireless beams
Compatible rack: Steel rack (2 x 2 meters included)
Input voltage : 90V - 240V AC ± 10% @ 50Hz *1
Current consumption : (Mains) 250mA
Battery charger current output: 1.8A @ 27.4V ± 1%
Maximum number of operations per day: 750
Duty cycle - Mains present: 45%
Motor voltage: 24V DC
Motor power supply: Battery-driven (Standard Capacity - 2 x 12V 7.2Ah)
Current consumption: (motor at rated load)     8A
Motor push force – starting: 40Kgf
Gate mass – maximum: 1000Kg
Gate length – maximum: 50m
Drive Pinion: 17T Module 4
Collision Sensing: Electronic
Operating temperature range: -15°C to +50°C
Onboard receiver type: Code-hopping multichannel receiver with selective add and delete
Receiver code storage capacity: 1500 Remote buttons
Receiver frequency: 433.92Mhz
Degree of protection: IP54

Instructions for use
• Refer to detailed installer manual.

Maintenance and care
• Ensure that the track is kept clear from stones, dirt or any obstruction. Gate brushes can be installed to assist in clearing the obstructions.
• Ensure that the Gate wheels V profile, Gate wheels U profile or Gateshox run freely.
• Manual override the motor and check that the gate runs freely without any obstruction.
• Check that the rack is properly secured to the gate and that it does not press down on the operator pinion at any point while opening or closing.
• Clean around the motor area to ensure that vegetation does not grow to close to the motor and pinion.
• Check that the key still opens and closes the camlock as well as the discuss lock for the Anti Theft bracket and lubricate if necessary.
• Inspect the inside of the motor by removing the cover and ensure that it is clear of any insects and dust.

Warnings and limitations
• All installations must be done by a suitable qualified technician.
• Under no circumstances may any of the components be modified.

16-ch 1.5U AcuSense 4K NVR
H.265+/H.265/H.264+/H.264 video formats
Intelligent analytics based on deep learning algorithm
Up to 4-ch perimeter protection
Up to 1-ch facial recognition for video stream, or up to 4-ch facial recognition for face picture
Up to 16-ch IP camera inputs
Up to 16-ch 1080p decoding capability
Up to 160 Mbps incoming bandwidth



System Parameter
Video Input Channel
16
Incoming Bandwidth
160 Mbps
Outgoing Bandwidth
256 Mbps
Video Resolution
12MP/8MP/7MP/6MP/5MP/4MP/3MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF
Video Parameter
Video Output
2-ch HDMI, 1-ch VGA
HDMI Output
HDMI1 output: 4K (3840 × 2160)/60Hz, 4K (3840 × 2160)/30Hz, 2K (2560 × 1440)/60Hz, 1920 × 1080/60Hz, 1600 × 1200/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz, HDMI1/VGA simultaneous output HDMI2 output:1920 × 1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz, HDMI2/VGA independent output
VGA Output
1-ch, 1920 × 1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz,
CVBS Output
1-ch, BNC (1.0 Vp-p, 75 Ω), resolution: PAL: 704 × 576, NTSC: 704 × 480
Live View Window Division
1/4/6/8/9/16/25/32/36
Aux Port Window Division
1/4/6/8/9/16/25/32/36
Video Decoding Format
H.265;H.265+;H.264;H.264+;MPEG4
Decoding Capability
16-ch @ 1080p (30 fps)
Synchronous Playback
16-ch
Audio Parameter
Audio Decoding Format
G.711ulaw;G.711alaw;G.722;G.726;MP2L2
Audio Output
1-ch, RCA (Linear, 1 KΩ)
Two-Way Audio
1-ch, RCA (2.0 Vp-p, 1 KΩ)
Smart Analysis
Face Picture Library
Up to 16 face picture libraries, with up to 10,000 face pictures in total (each picture ≤ 512 KB, total capacity ≤ 150 MB)
List Library Capacity
1w
List Library
16
Face Picture Comparison
4-ch face picture comparison alarm
Face Capture
1-ch human face capture (HD network camera, up to 4 MP, H.264/H.265)
HDD Management
HDD No.
4 SATA interfaces
Extended Storage
1 eSATA interface
Recording Management
Playback Mode
Normal/Smart, Event, Tag, Eternal File
External Port
Network Interface
2, RJ-45 10/100/1000 Mbps self-adaptive Ethernet interface
Serial Port
RS-485 (half-duplex), RS-232, Keyboard
USB Interface
Front panel: 2 × USB 2.0; Rear panel: 1 × USB 3.0
Alarm Input/Output
16/4
General Standard
Power
≤ 80W
Consumption (Without HDD)
≤ 30W
Working Temperature
-10℃～＋55℃
Working Humidity
10％～90％
Chassis
1.5U
Dimension
445 × 400 ×75 mm ( 17.5"× 15.7" × 3.0")
Weight (Without HDD)
≤ 5.6 kg (12.3 lb)

Product Code: TX1NV4433
The Centurion Nova V3 SG 1 Button remote on a 433MHz frequency uses code hopping technology to offer the ultimate security in a remote control. A unique randomly changing code is transmitted with each operation making it impossible to duplicate the system.

APPLICATIONS
• 1 Channel Centurion Nova receiver
• 2 Channel Centurion Nova Receiver, 4 Channel Centurion Nova Receiver
• Centurion Supa Nova multi user receiver
• Centurion D2 controller
• Centurion D5 Evo controller
• Centurion D5 Smart controller
• Centurion D10 controller
• Centurion Sector Traffic barrier
• Centurion G2 intercom system
• Centurion RDO
• Centurion Vantage controller
• Centurion Vert X controller
• Centurion Vector
• Centurion GDO XTrac

SPECIFICATIONS
Brand: Centurion
Coding: Code hopping
Frequency: 433.92MHz
Buttons : 1 Button
Power source:  GP23 12V Alkaline battery
Operating voltage: 12V DC
Min operating voltage: 5V DC
Operating current: 7mA
Transmit indication: White LED

INSTRUCTIONS FOR USE
• For detailed operation and programming guidelines consult the product manual

MAINTENANCE AND CARE
• When low battery voltage indicator flashes, replace battery
• Rotate the use of spare transmitters regularly so that it works if and when required
• Keep the spare transmitters safe to prevent unauthorized access
• Store in a clean and dry space
• Keep out of reach of children and pets

16-ch 1U 16 PoE 4K NVR
Up to 16-ch IP camera inputs
H.265+/H.265/H.264+/H.264 video formats
Up to 2-ch@8 MP or 4-ch@4 MP or 8-ch@1080p decoding capacity
1 HDMI and 1 VGA interfaces, both interfaces support independent video output
2 SATA interfaces for HDD connection (up to 10 TB capacity per HDD)
Up to 160 Mbps incoming bandwidth
Plug-and-play with 8 power over Ethernet (PoE) interfaces



Video Parameter
Decoding Capability
8*1080P
Video And Audio
IP Video Input
16-ch
Incoming Bandwidth
160 Mbps
Outgoing Bandwidth
160 Mbps
HDMI Output
4K (3840 × 2160)/30 Hz, 2K (2560 × 1440)/60 Hz, 1920 × 1080/60 Hz, 1600 × 1200/60 Hz, 1280 × 1024/60 Hz, 1280 × 720/60 Hz
VGA Output
1920 × 1080/60 Hz, 1280 × 1024/60 Hz, 1280 × 720/60 Hz
Video Output Mode
HDMI/VGA independent output
Audio Input
1-ch, RCA (2.0 Vp-p, 1 KΩ)
Audio Output
1-ch, RCA (Linear, 1 KΩ)
Two-Way Audio
1-ch, RCA (2.0 Vp-p, 1 KΩ, using the audio input)
Decoding
Decoding Format
H.265/H.265+/H.264/H.264+
Recording Resolution
12 MP/8 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF
Synchronous Playback
16-ch
Decoding Capability
1-ch@12 MP (30 fps)/2-ch@8 MP (30 fps)/4-ch@4 MP (30 fps)/8-ch@1080p (30 fps)
Stream Type
Video, Video & Audio
Audio Compression
G.711ulaw/G.711alaw/G.722/G.726
Network
Remote Connection
128-ch
Network Protocol
TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP™, HTTP, HTTPS
Network Interface
1 RJ-45 10/100/1000 Mbps self-adaptive Ethernet interface
PoE
Interface
16, RJ-45 10/100 Mbps self-adaptive Ethernet interface
Power
≤ 200 W
Standard
IEEE 802.3 af/at
Auxiliary Interface
SATA
2 SATA interfaces
Capacity
Up to 10 TB capacity for each HDD
USB Interface
Front panel: 1 × USB 2.0; Rear panel: 1 × USB 2.0
Alarm In/Out
4/1
General
Power Supply
100 to 240 VAC, 50 to 60Hz
Consumption
≤ 15 W (without HDD and PoE off)
Working Temperature
-10 °C to 55 °C (14 °F to 131 °F)
Working Humidity
10 to 90 %
Dimension (W × D × H)
385 × 315× 52 mm (15.2" × 12.4" × 2.0")
≤ 3 kg (without HDD, 6.6 lb.)
Certification
FCC
Part 15 Subpart B, ANSI C63.4-2014
CE
EN 55032: 2015, EN 61000-3-2, EN 61000-3-3, EN 50130-4, EN 55035: 2017

8-ch 1U 4K NVR
Up to 8-ch IP camera inputs
H.265+/H.265/H.264+/H.264 video formats
Up to 2-ch@8 MP or 4-ch@4 MP or 8-ch@1080p decoding capacity
1 HDMI and 1 VGA interfaces, both interfaces support independent video outpu
2 SATA interfaces for HDD connection (up to 10 TB capacity per HDD)
Up to 80 Mbps incoming bandwidth



Video And Audio
IP Video Input
8-ch
Incoming Bandwidth
80 Mbps
Outgoing Bandwidth
160 Mbps
HDMI Output
4K (3840 × 2160)/30 Hz, 2K (2560 × 1440)/60 Hz, 1920 × 1080/60 Hz, 1600 × 1200/60 Hz, 1280 × 1024/60 Hz, 1280 × 720/60 Hz
VGA Output
1920 × 1080/60 Hz, 1280 × 1024/60 Hz, 1280 × 720/60 Hz
Video Output Mode
HDMI/VGA independent output
Audio Input
1-ch, RCA (2.0 Vp-p, 1 KΩ)
Audio Output
1-ch, RCA (Linear, 1 KΩ)
Two-Way Audio
1-ch, RCA (2.0 Vp-p, 1kΩ, using the audio input)
Decoding
Decoding Format
H.265/H.265+/H.264/H.264+
Recording Resolution
12 MP/8 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF
Synchronous Playback
8-ch
Decoding Capability
1-ch@12 MP (30 fps)/2-ch@8 MP (30 fps)/4-ch@4 MP (30 fps)/8-ch@1080p (30 fps)
Stream Type
Video, Video & Audio
Audio Compression
G.711ulaw/G.711alaw/G.722/G.726
Network
Remote Connection
128-ch
Network Protocol
TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP™, HTTP, HTTPS
Network Interface
1, RJ-45 10/100/1000 Mbps self-adaptive Ethernet interface
Auxiliary Interface
SATA
2 SATA interfaces
Capacity
Up to 10 TB capacity for each HDD
USB Interface
Front panel: 1 × USB 2.0; Rear panel: 1 × USB 2.0
Alarm In/Out
4/1
General
Power Supply
12 VDC, 3.33A
Consumption
≤ 15 W (without HDD)
Working Temperature
-10 °C to 55 °C (14 °F to 131 °F)
Working Humidity
10 to 90 %
Dimension (W × D × H)
385 × 315× 52 mm (15.2" × 12.4" × 2.0")
≤ 1 kg (without HDD, 2.2 lb.)
Certification
FCC
Part 15 Subpart B, ANSI C63.4-2014
CE
EN 55032: 2015, EN 61000-3-2, EN 61000-3-3, EN 50130-4, EN 55035: 2017

NICE 7" Colour Video Intercom Kit incl Brushed Aluminium Gate Station

In today’s age, personal and business security is a major area of concern, and we are continuously looking at how to improve our safety. Thus, it has become increasingly important for us to be in a position to see who is at the entrance to business parks, office buildings, residential estates, etc. The DNAKE range provides an IP based Video Intercom Solution for both commercial and residential properties.

The video intercom solution consists of two key parts, namely door stations (outdoor units) and indoor monitors, which combine to provide a high-resolution video feed of visitors at your entrance. The door station allows the visitor/guest to dial the unit/apartment/office, with the built-in camera providing the video feed. This will cause the indoor monitor to “ring” and display the video feed from the door station camera. Now you can talk to the visitor and remotely unlock the door (if the solution has been connected to a magnetic door lock or similar).

The DNAKE video intercom solution is based on standard SIP, ensuring that it can interface with IP Phones (such as Yealink IP Phones) and IP PBX (such as 3CX) for a complete IP solution.

The DNAKE 280D-C12 video door phone (nicknamed the Villa Panel) is the perfect solution for individual offices or homes – the single button design was created with this in mind. Although compact, the 280D-C12 packs a powerful single 2MP camera for excellent video quality. Access can also be gained using a pin number or RFID card.

A power supply unit, connecting Hub/Hub Plus control panels and ReX radio signal range extender to low-voltage power sources.

Use Ajax in premises lacking electricity or having an unstable power supply. A 12 V power supply unit allows connecting hubs and radio signal extenders to low-voltage networks or use an external battery.

Ajax protects your home, even if it goes on wheels. With a 12 V power supply, the security system can travel with you, connecting to a car or portable battery.

Compatibility
The power supply unit is compatible with Hub, Hub Plus, and ReX. It features a standard socket for connecting the power jack plug and has a bundled terminal adapter.

Specification:
Compatibility: Hub, Hub Plus, ReX
Input voltage: 8-20 V DC
Output voltage: 4.65 V ± 3%
Switch-on voltage: 8 V ± 2.5%
Switch-off voltage: 6.9-7.5 V (depending on load)
Input current: <1 ?
Output current: 1,5 ?
Connection: Socket: 6,5 ? 2 mm
Plug: 5,5 ? 2,1 mm (power jack)

Specification:

Color: White/Black
Material: Plastic
Operating temperature range: From -10°C to +40°
Operating humidity: Up to 75%

Ajax Hub 2 Plus security system control panel
Instant communication with users and alarm monitoring company.
Communication with the outer world is critical for alarm control panels as its reliability guarantees prompt delivery of alarm signals. The new Ajax control panel makes external communication stability absolute.
Hub 2 Plus is equipped with a communicator that features 4 independent channels including LTE. This configuration allows you to connect the device to two separate Internet providers over Ethernet and Wi-Fi while having two cellular services ready for back up. Switching between channels happens seamlessly in seconds.

Ajax VHF Bridge White is a transponder that provides a hub with an additional channel to communicate with a monitoring station. With Ajax VHF Bridge White you can use Ajax systems in cities where Internet connection is unstable, in nature reserves, mountain and desert areas.

Specifications:

Transponder for communication with the monitoring station via a VHF transmitter
Output types
Positive trip and negative trip (depends on the settings)
Transmission types
Pulse and bistable (depends on the settings)
Compatible with Ajax central units
Operates with Hub 2, Hub Plus, Hub 2 Plus
vhfBridge connects to any VHF transmitter with relay input
Primary power supply: 100–240 V, 50/60 Hz

The Ajax Wireless Door Protect Plus Black is a wireless opening detector that notifies you of first signs of intrusion into the room through the door or window. The Ajax Wireless Door Protect Plus Black can be installed on roof windows which can be left open when leaving the house.

The Ajax Door Protect Plus is a wireless opening detector that notifies you of first signs of intrusion into the room through the door or window. Ajax Wireless Door Protect Plus White can be installed even on roof windows which can be left open when leaving the house.

The Ajax Wireless Fire Protect Plus with a built in carbon oxide detector is a wireless fire detector with temperature and carbon oxide sensors that monitors security in the room twenty four hours a day and immediately notifies of dangerous CO levels, smoke and sharp jumps in temperature.

The Ajax FireProtect is a wireless fire detector with a temperature sensor that monitors security in the room twenty four hours a day and immediately notifies of smoke and sharp jumps in temperature