These spray paints are especially developed for finishing aircraft models to provide the authentic tones. Each can contains 100ml of paint. The paint is a synthetic lacquer that cures in a short period of time

Tamiya spray paints are not affected by acrylic or enamel paints. Therefore following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints.

These spray paints are especially developed for finishing aircraft models to provide the authentic tones. Each can contains 100ml of paint. The paint is a synthetic lacquer that cures in a short period of time

Tamiya spray paints are not affected by acrylic or enamel paints. Therefore following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints.

These spray paints are especially developed for finishing aircraft models to provide the authentic tones. Each can contains 100ml of paint. The paint is a synthetic lacquer that cures in a short period of time

Tamiya spray paints are not affected by acrylic or enamel paints. Therefore following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints.

These are small, electric motor powered, four wheel drive models. Motor

power is transmitted to the wheels via propeller shaft and worm gears

just like the prototypes. Requires no cement for construction. These

are action model kits that will provide hours of enjoyment in the

building and running.

For the 2005 WRC Monte Carlo Rally, the Subaru team entered the upgraded Subaru Impreza as used in the latter half of the 2004 season. Despite suffering brake troubles, 2003 champion Petter Solberg was able to keep up with the leaders after the first 2 days. On the final day he recorded the fastest times in the first 2 stages to climb up to 3rd place, before being forced to retire after a heavy crash in the snow. Although unlucky in the first race of the season, Solberg and the Subaru team were able to quickly forget the disappointment of Monte Carlo, taking victory in round 2 in Sweden, proving Solberg and the Impreza have what it takes to win the WRC crown back.

About the model:

- 1/24 scale replica plastic model of the 2005 Monte Carlo Rally Subaru Impreza
- Overall length: 183mm, width: 75mm, height: 57mm
- Details unique to Monte Carlo vehicle all reproduced including lowered chassis for tarmac racing, straight lower arms, on-road Pirelli tires and wheels, and short antennas.
- Sectioned rear wing comes molded as one piece. 10-spoke wheels come pre-finished in gold.
- The essence of a rally car fully captured with detailed cockpit and interior roll cage.
- Includes markings for Solberg's No.5 and Sarrazin's No.6 vehicles.

This kit assists modelers in recreating fortified positions and urban

battlefields.

Features:
- These enamel paints are ideal for highlighting panel lines and other details to give your model a more realistic depth. The paint has been pre-diluted into the
ideal viscosity and can be easily applied into crevasses such as panel lines with the brush on the bottle cap. Once dried, any excess may be cleaned up by using an enamel thinner.

This is a high-precision model assembly kit of the Ford GT!

Specifically, this version represents the second-generation iteration

which was unveiled at the 2015 North American International Auto Show.

The Porsche Turbo RSR 934 was a descendent of the world-famous Porsche 911 Turbo, and appeared for the first time in the Group 4 GT class in 1976. The rear-mounted 2,994cc turbocharged flat-6 engine was capable of 260hp, making it a top-of-the-line production car at the time. This model, covered in the famous Jagermeister livery, sped to victory in both the European GT Championship and the German Sports Car Championship in its debut season.

The Tamiya assembly kit model faithfully captures all the details of this famous racing car in 1/24 scale.

These cans of spray paint are extremely useful for painting large surfaces. The paint is a synthetic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/24 scale sized car bodies.

Tamiya spray paints are not affected by acrylic or enamel paints. Therefore following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints.

The 7.5 cm anti-tank gun was to become the main and typical anti-tank weapon of the German Army. It was often towed by the 3-ton tractor Sdkfz 11. With the progress of the war situation, the gun combined with the chassis of fighting vehicles including the Pzkpfw IV to make up a great number of tank destroyers or self-propelled anti-tank guns that rendered distinguished services thereafter.

Suggested Paint Colors

X-1 - Black
X-10 - Gun Metal
X-7 - Red
XF-1 - Flat Black
XF-10 - Flat Brown
XF-15 - Flat Flesh
XF-61 - Dark Green
XF-65 - Field Grey

Adding photo-etched parts is one of the best ways to give your model a professional-level finish, ensuring that it stands out from the pack. However, we all know that working with stainless metal parts can be trickier than with standard plastic parts. Tamiya is offering the following 3 craft tools to make using photo-etched parts easier than ever before. Purchase all 3 tools to vastly simplify your modeling work; it's as easy as 1-2-3!

1 - Cutting Out Parts ------------> Use Modeling Scissors
2 - Removing Flash -------------> Use Diamond File
3 - Bending/Shaping ------------> Use Bending Pliers

About the Scissors:

- Small size (1cm) blades last longer than modeling knife, perfect for cutting out small parts.
- Easy-to-use shape suited to precision photo-etched part work (cannot cut thicker surfaces)
- Includes special cap to preserve blades.

These cans of spray paint are extremely useful for painting large surfaces. The paint is a synthetic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/24 scale sized car bodies.

Tamiya spray paints are not affected by acrylic or enamel paints. Therefore following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints.

About the F-16 Fighting Falcon

Highly regarded as one of the world's leading lightweight multi-purpose fighters, the F-16 Fighting Falcon is capable of precision attack during air-to-air and air-to-surface combat. The success of the F-16 comes from its precision control, with aerodynamic body design combining with innovative electronic fly-by-wire technology for precision maneuvering at both low and high speeds, and low and high altitudes. Fitted with one single turbo jet engine, the F- 16 has a top speed of over Mach 2. Currently used by more than 20 countries around the world, the F-16 has been deployed to actual conflict since the 1980's including seeing action in significant conflicts such as the Arab-Israeli conflict, the Gulf War, Kosovo, Afghanistan and Iraq.

About the F-16CJ (Block 50)

Delivered to units from August 1991, the F-16 Block 50 is the newest F-16 currently being deployed to U.S. units. Major upgrades added to the Block 50 were a more powerful turbo engine, an improved radar and an improved countermeasure system. Fitted with a General Electric engine, the fuselage features the distinctive wide 'Big Mouth' air duct that was first introduced on the Block 30. The Block 50 variant, the F-16CJ, comes equipped with AGM-88 HARM (High-speed Anti-Radiation Missile) and AN/ASQ-213 HARM Targeting System (HTS), and are used for SEAD (Suppression of Enemy Air Defense) missions, which include searching out and destroying air-defense radar and missile sites. F-16CJ were delivered to units from May 1993, and were used during Operation Iraqi Freedom and patrol of the no-fly zone over Iraq following the Gulf War.

20 Reasons Why You Must Have Tamiya's 1/32 F-16!

- Model represents the F-16CJ (Block 50) as used for USAF SEAD 'Wild Weasel' missions.
- First ever 1/32 scale F-16 model replicating General Electric engine and 'Big Mouth' duct.
- Tamiya's most detailed 1/32 scale jet fighter ever.
- General Electric F-110 jet engine replicated in precise detail.
- Engine slides into aircraft on a hook and rail system exactly like the actual aircraft.
- Engine can be displayed outside of aircraft using its very own cart.
- Moveable ejector seat placed on slide rail like actual aircraft.
- Curved bubbletop canopy can be assembled in the opened or closed position.
- Choice of two types of canopy, clear and smoked.
- 1 pilot figure for cockpit included.
- Pilot tube and static dischargers reproduced using metal parts.
- Die-cast landing gear for extra durability.
- Metal weight added to nose for accurate front-rear weight distribution.
- Includes actual rubber tires.
- Photo-etched parts used for seat buckles, radar antenna, chaff/flare dispensers and name-plate for high-quality display.
- Nose cone can be opened and closed allowing display of accurately recreated radar.
- Trailing edge flaps, horizontal stabilizer fins and vertical tail fin flaps can move after assembly thanks to poly caps.
- Missiles can be removed and replaced even after assembly.
- Gun hatch can be opened after assembly displaying machine gun.
- Packaging box has been specially designed allowing large scale model to be easily stored even after assembly.

Model Details:

Immaculately detailed jet engine can be removed and loaded via a hook and rail system. Stores can be removed and replaced after assembly. Trailing edge flaps, horizontal stabilizer fins and vertical tail fin flaps move after assembly Ejector seat slides up and down on a rail. Metal pitot tube and static dischargers Die-cast metal landing gear Photo-etched seatbelt buckles, radar antenna and flare dispensers 1 pilot figure Box designed to store model after assembly.

Suggested Paint Colors

AS-10 - Ocean Gray (RAF)
AS-12 - Bare Metal Silver
AS-21 - Dark Green 2 (IJN)
AS-26 - Light Ghost Grey
AS-27 - Gunship Grey 2
AS-28 - Medium Grey
AS-6 - Olive Drab (USAAF)
TS-27 - Matte White
X-10 - Gun Metal
X-11 - Chrome Silver
X-12 - Gold Leaf
X-13 - Metallic Blue
X-18 - Semi Gloss Black
X-2 - White
X-21 - Flat Base
X-25 - Clear Green
X-27 - Clear Red
X-28 - Park Green
X-31 - Titanium Gold
X-32 - Titanium Silver
X-4 - Blue
X-8 - Lemon Yellow
XF-1 - Flat Black
XF-12 - J.N. Grey
XF-16 - Flat Aluminum
XF-19 - Sky Grey
XF-2 - Flat White
XF-21 - Sky
XF-23 - Light Blue
XF-3 - Flat Yellow
XF-4 - Yellow Green
XF-49 - Khaki
XF-5 - Flat Green
XF-51 - Khaki Drab
XF-56 - Metallic Grey
XF-57 - Buff
XF-59 - Desert Yellow
XF-65 - Field Grey
XF-66 - Light Grey
XF-7 - Flat Red
XF-71 - Cockpit Green
XF-9 - Hull Red

About the Supermarine Spitfire Mk.Vb/Mk.Vb Trop.

The mass production of the Spitfire started in 1936 and more than 20000 planes were produced until 1948. Among several variations of this main fighter of Royal Air Force, the Mk.V series was the most widely produced and more than 6500 planes were deployed. By early 1941, the majority of fighter squadrons were furnished with Spitfire Mk.I. Improvements were suggested by the pilots and every effort was made to maintain its performance advantages over its opponents. The main improvement was the use of the more powerful Merlin type 45 engine and a version with a mixed armament of four 7.7mm machine guns and two 20mm cannon was named "Mk.Vb". Some Mk.Vb's has slipped wing tips for better low altitude maneuverability. In 1942, the Spitfire was also urgently required for operations overseas. One of the better known versions was the North African prepared Spitfire designated "TROP.", for Tropical. To protect engine from sand, a Vokes air filter was affixed over the carburetor intake. Although the filter was successful, its large mass reduced the aircraft's speed. The problem was solved by 103rd maintenance unit stationed at Aboukir, who designed a smaller more streamlined unit that was equally effective. The spitfire went through numerous minor and major changes throughout its production life, and served with distinction on every battle front of the war.

These spray paints are especially developed for finishing aircraft models to provide the authentic tones. Each can contains 100ml of paint. The paint is a synthetic lacquer that cures in a short period of time

Tamiya spray paints are not affected by acrylic or enamel paints. Therefore following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints.

The iconic Japanese hobby company Tamiya has been at the forefront of

the modeling industry and is synonymous with innovation, quality and

detail, since1948 when the company started with its first wooden model

kits. Tamiya’s range has grown to include plastic kits, radio control,

educational kits, modeling accessories, paints and tools all of which

are revered for their quality, level of detail and design by modeling

enthusiasts around the world.

Tamiya lapping film is a great resource for model builders of all types. It allows you to provide a smooth and even finish to your paint job. Each film piece is uniformly covered with fine abrasive particles and can be used to rub away rough surfaces or joints.

- #8000 Fine Lapping Film x3 (Pink)
- Extremely fine finish is great as a pre-treatment when using Tamiya Compound products (Items 87068, 87069 and 87070) for glossy surface finishes.
- Dimensions: 93mm x 228mm
- May be used for wet sanding.

These cans of spray paint are extremely useful for painting large surfaces. The paint is a synthetic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/24 scale sized car bodies.

Tamiya spray paints are not affected by acrylic or enamel paints. Therefore following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints.

This highly detailed, 8 figure set from Tamiya features a group of

German Assault troops advancing. These figures are modelled in various

poses including running, firing, crouching and leaping. Included with

this set is a selection of weapons and accessories to add detail to

each figure. Requires assembly and painting.

These spray paints are especially developed for finishing aircraft models to provide the authentic tones. Each can contains 100ml of paint. The paint is a synthetic lacquer that cures in a short period of time

Tamiya spray paints are not affected by acrylic or enamel paints. Therefore following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints.

Attached to a flexible sponge base, the abrasive coat of this sanding sheet is well-suited for removing protrusions on plastic models and also finishing materials such as wood and metal. The sponge's flexibility allows even finishing of curved surfaces and hard-to-reach corners. This item can be easily cut into the desired shape/size using a modeling knife. Note: Suitable for wet sanding use. Choose from 4 different levels of abrasion. 400,600,1000,1500

Carbon weave decals are a great way to enhance your models level of realism. Many of Tamiya’s car and motorcycle subjects have parts that depict raw carbon parts, such as winglets, spoilers, and body panels. With Tamiya carbon fiber decal sheets, you can easily replicate these parts on your model with relative ease. Simply cut to the size and shape of the section that you want to cover, and apply. When used in conjunction with Tamiya MARK FIT and MARK FIT STRONG (Tamiya’s decal setting solution solvents), forming the decal sheet to curved surfaces make application even easier.

• Sheet dimension: 130mm x 190mm x1.
• Sheet features no pre-marked shapes and can be cut to desired shape and size.
• Great for use on static models of bikes, cars and more from 1/6 to 1/24 scale.

.