Even a cursory perusal of any analytical journal will demonstrate the increasing important of trace and ultra-trace analysis. And as instrumentation continues to develop, the definition of the term "trace element" will undoubtedly continue to change. Covering the composition and underlying properties of freshwater and marine systems, Analytical Measurements in Aquatic Environments provides the basis for understanding both. It discusses all aspects of analytical protocols from the handling of representative samples to the metrological evaluation of specific steps and whole procedures. The book covers: handling of representative samples sample preservation techniques extraction techniques speciation analytics solvent-free sample preparation for analysis application of biotests bioanalytical methods for monitoring green analytical chemistry-application of the concept of sustainability in analytical laboratories application of the Life Cycle Assessment approach quality control and quality assurance of analytical results enhanced techniques of sample preparation hyphenated analytical techniques Ecotoxicological considerations and the effort to achieve an increasingly accurate description of the state of the environment challenge analytical chemists who need to determine increasingly lower concentrations of various analytes in samples that have complex and even non-homogenous matrices. The newly coined expression "analytics" emphasizes the interdisciplinary nature of available methods for obtaining information about material systems, with many methods that exceed the strict definition of analytical chemistry. Drawing on the disciplines of chemistry, physics, computer science, electronics, material science, and chemometrics, this book provides in depth information on the most important problems in analytics of samples from aquatic ecosystems.

In recent years, the area dealing with the physical chemistry of materials has become an emerging discipline in materials science that emphasizes the study of materials for chemical, sustainable energy, and pollution abatement applications. Written by an active researcher in this field, Physical Chemistry of Materials: Energy and Environmental Applications presents methods for synthesizing and characterizing adsorbents, ion exchangers, ionic conductors, heterogeneous catalysts, and permeable porous and dense materials. It also discusses their properties and applications. The book explores various examples of these important materials, including perovskites, zeolites, mesoporous molecular sieves, silica, alumina, active carbons, carbon nanotubes, titanium dioxide, magnesium oxide, clays, pillared clays, hydrotalcites, alkali metal titanates, titanium silicates, polymers, and coordination polymers. It shows how the materials are used in adsorption, ion conduction, ion exchange, gas separation, membrane reactors, catalysts, catalysts supports, sensors, pollution abatement, detergency, animal nourishment, agriculture, and sustainable energy applications. Rising pollution levels and the need for sustainable energy have necessitated new ways of using certain materials to combat these problems. Focusing on this emerging discipline, Physical Chemistry of Materials describes the methods of syntheses and characterization of adsorbents, ion exchangers, ionic conductors, catalysts, and permeable materials. It tackles key issues in materials science and physical chemistry.

Geotechnical instrumentation is used for installation, monitoring and assessment on any sizeable project, particularly in urban areas, and is used for recording, controlled remedial work, and safety. This unique and up-to-date book deals with the conceptual philosophy behind the use of instruments, and then systematically covers their practical use. It is divided into displacement dominated systems and stress recording systems. The limitations are discussed and the theoretical background for data assessment and presentation are covered in some detail, with some relevant background material in theoretical soil mechanics. Relevant advanced electronic techniques such as laser scanning in surveying and fibre-optics are also included and communication and data recovery systems are discussed. This book is written for senior designers, consulting engineers, and major contractors who need a major introduction to the general purpose, availability, and analysis of field instruments before details of their own project can be progressed, and it serves as a textbook to any specialist geotechnical MSc or professional seminar course in which instrumentation forms a major part.

Dam and levee remediation has become more prevalent since the start of the twenty-first century. Given the vastness and complexity of the infrastructures involved, keeping up with maintenance needs is very difficult. Major surges in repair are usually triggered by nature's wake-up calls, such as hurricanes, floods, and earthquakes. The challenge has been to develop methods that ensure safe, effective, reliable, and robust solutions for current and future remediation issues. Specialty Construction Techniques for Dam and Levee Remediation presents the state of practice in North American dam and levee remediation as it relates to the use of specialty geotechnical construction techniques, such as anchors, grouting, cutoff (diaphragm) walls, and deep mixing. The book focuses on the actual construction processes, describing design and performance aspects of remediation where appropriate. Chapters deal with the application of drilling and grouting methods, methods to install mix-in-place (category 2) cutoff structures, excavated and backfilled trenches (category 1), composite cutoff walls, and stabilization using prestressed rock anchors. The book also provides a comprehensive guide to dam and levee instrumentation, covering planning, operating principles, data management, staffing, and automation. As an educational and salutary example of ineffective efforts, the final chapter presents a case history of a series of remediations performed on a single project, which ultimately proved unsuccessful. A wide range of methods has been developed in response to the challenges that arise in the dam and levee remediation arena and the need for a competitive edge. These new methods are designed and monitored using state-of-the-art techniques, giving rise to the emergence of new intensity and initiative in this field. This book captures this transformation by examining the theory and practice of contemporary remedial techniques, using recent U.S. case histories to provide knowledge and inspiration to readers, both in North America and around the world.

Green Energy: Sustainable Electricity Supply with Low Environmental Impact defines the future of the world's electricity supply system, exploring the key issues associated with global warming, and which energy systems are best suited to reducing it. Electricity generation is a concentrated industry with a few sources of emissions, which can be controlled or legislated against. This book explains that a green sustainable electricity system is one whose construction, installation, and operation minimally affect the environment and produce power reliability at an affordable price. It addresses the question of how to build such an electricity supply system to meet the demands of a growing population without accelerating global warming or damaging the environment. The green argument for conservation and renewable energies is a contradiction in terms. Although they produce no emissions, because renewable systems are composed of a large number of small units, a considerable amount of energy is required to produce, erect, and maintain them. This book is a response to that conundrum, answering key questions, such as: How can renewables be exploited to contribute the greatest energy input? Should coal be used for clean fuel and chemical production rather than for power generation? How quickly can we start to build the Green Energy system? The author has more than forty years of experience as an international journalist reporting on power-generating technologies and on energy policies around the world. Detailing the developmental history, and current state, of the global nuclear industry, he discusses the dire, immediate need for large quantities of clean, emission-free electric power, for both domestic and industrial uses. This book details how current technologies-particularly nuclear, combined cycle, and hydro-can be applied to satisfy safely the growing energy demands in the future.

Although nosocomial, or hospital-acquired, infections have been well cataloged and are fairly well understood, traditional solutions have failed to completely eliminate the problem. Even the most modern hospitals find themselves stymied by the persistence of these pathogens in hospital wards and operating rooms. The degree to which most of these infections are airborne is not known, but a growing body of evidence indicates that airborne transmission plays a role in many hospital-acquired infections. Addressing one of the most important topics in health care, Hospital Airborne Infection Control is the first book to deal with the control of airborne nosocomial infections in detail. It identifies all pathogens known or suspected to be airborne, along with their sources in hospital environments. It also summarizes all epidemiological evidence for airborne transmission. The text addresses respiratory, surgical site, burn wound, immunocompromised, pediatric, nursing home, and non-respiratory infections. In each category, an extensive number of examples show that inhalation is not the only airborne route by which infections may be transmitted. Noting that airborne transmission and surface contamination are virtually inseparable, the author emphasizes that both air and surface disinfection, including hand hygiene, are important factors in controlling the transmission of airborne disease. He also proposes a variety of new solutions and technologies, including ultraviolet, ionization, ozone, plasma, and vegetative air cleaning systems. A compendium of scientific and medical information, this book helps hospitals control nosocomial infections and outbreaks spread by the airborne route as well as by direct contact and contact with fomites or contaminated equipment.

Repairing or strengthening failing metallic structures traditionally involves using bulky and heavy external steel plates that often pose their own problems. The plates are generally prone to corrosion and overall fatigue. Fiber-reinforced polymer (FRP), a composite material made of a polymer matrix reinforced with fibers, offers a great alternative for strengthening metallic structures, especially steel structures such as bridges, buildings, offshore platforms, pipelines, and crane structures. FRP-Strengthened Metallic Structures explores the behaviour and design of these structures, from basic concepts to design recommendations. It covers bond behaviour between FRP and steel, and describes improvement of fatigue performance, bending, compression, and bearing forces, strengthening of compression and steel tubular members, strengthening for enhanced fatigue and seismic performance, and strengthening against web crippling of steel sections. It also provides examples of performance improvement by FRP strengthening.* Summarizes worldwide research on the FRP strengthening of metallic structures * Contains several topics not generally covered in existing texts * Presents comprehensive, topical references throughout the book The book outlines the applications, existing design guidance, and special characteristics of FRP composites within the context of their use in structural strengthening. While the major focus is on steel structures, it also describes others, such as aluminium structures. This book is suitable for structural engineers, researchers, and university students interested in the FRP strengthening technique. Xiao-Ling Zhao is chair of structural engineering at Monash University, Australia, and is author of Concrete-Filled Tubular Members and Connections, also published by Taylor & Francis.

This holistic book covers the richest area in North East India in terms of both explored and foreseen reserves of fossil fuels and other natural resources. Using a multidisciplinary approach, GIS, and geospatial data gathered from different case studies included, this book helps readers develop a thorough understanding of a highly dynamic big river, the Brahmaputra, and use it as a comprehensive resource for further understanding the science of rivers. It discusses the causal factors of decadal-scale fluvial dynamics, the nature of fluvial dynamics, lateral variability of the older flood plains and neotectonics in the shallow subsurface, and the overall trend of basin evolution at different depths.

Winner of the Japanese Geotechnical Society 2016 publication award Written by a veteran geotechnical engineer with a long record of research discoveries, Constitutive Modeling of Geomaterials: Principles and Applications presents a simple and unified approach to modeling various features of geomaterials in general stress systems. The book discusses the fundamentals of the constitutive modeling of soils and illustrates the application of these models to boundary value problems. Helping readers easily understand the fundamentals and modeling of soil behaviors, the author first explains the ideas and formulations for modeling soil features in one-dimensional conditions. He then extends the one-dimensional models to three-dimensional models using the tij concept. The text covers the subloading tij model and other methods that describe density, bonding, time effect, and more. Moving on to the practical application of the constitutive models, the author presents the numerical simulations of typical geotechnical problems (numerical modeling) and the corresponding model tests (physical modeling). Using a framework that leads to a unified set of material parameters, this book shows how to formulate a constitutive model capable of simulating the main features of soil behavior. It not only covers recent methods and models but also uses real test data to prove their reliability.

Supplementary cementing materials (SCMs), such as fly ash, slag, silica fume, and natural pozzolans, make a significant difference to the properties of concrete but are rarely understood in any detail. SCMs can influence the mechanical properties of concrete and improve its durability in aggressive environments. Supplementary Cementing Materials in Concrete covers the chemical, physical, and mineralogical properties of SCMs; their chemical reactions; and the resulting changes in the microstructure of concrete. The author links the properties of the material at the microstructural level with its behavior in laboratory tests, and, in turn, to the performance of the material in concrete structures under field exposure. He explains how SCMs influence the mechanical properties of concrete and improve its durability and also covers how various SCMs influence hydration reactions and the evolution of the pore structure and pore-solution composition. However, SCMs are not a panacea for concrete and improper use may be injurious to certain properties. Achieving the maximum benefit from SCMs requires an understanding of the materials and how they impact concrete properties under various conditions. Drawing on the author's 30 years of experience, this book helps engineers and practitioners to optimize the use of supplementary cementing materials to improve concrete performance.

Develop a Greater Understanding of How and Why Surface Wave Testing Works Using examples and case studies directly drawn from the authors' experience, Surface Wave Methods for Near-Surface Site Characterization addresses both the experimental and theoretical aspects of surface wave propagation in both forward and inverse modeling. This book accents the key facets associated with surface wave testing for near-surface site characterization. It clearly outlines the basic principles, the theoretical framework and the practical implementation of surface wave analysis. In addition, it also describes in detail the equipment and measuring devices, acquisition techniques, signal processing, forward and inverse modeling theories, and testing protocols that form the basis of modern surface wave techniques. Review Examples of Typical Applications for This Geophysical Technique Divided into eight chapters, the book explains surface wave testing principles from data measurement to interpretation. It effectively integrates several examples and case studies illustrating how different ground conditions and geological settings may influence the interpretation of data measurements. The authors accurately describe each phase of testing in addition to the guidelines for correctly performing and interpreting results. They present variants of the test within a consistent framework to facilitate comparisons, and include an in-depth discussion of the uncertainties arising at each stage of surface wave testing. Provides a comprehensive and in-depth treatment of all the steps involved in surface wave testing Discusses surface wave methods and their applications in various geotechnical conditions and geological settings Explains how surface wave measurements can be used to estimate both stiffness and dissipative properties of the ground Addresses the issue of uncertainty, which is often an overlooked problem in surface wave testing Includes examples with comparative analysis using different processing techniques and inversion algorithms Outlines advanced applications of surface wave testing such as joint inversion, underwater investigation, and Love wave analysis Written for geotechnical engineers, engineering seismologists, geophysicists, and researchers, Surface Wave Methods for Near-Surface Site Characterization offers practical guidance, and presents a thorough understanding of the basic concepts.

The Strip Method Design Handbook is a thorough guide to the use of the strip method, developed by Arne Hillerborg, for design of reinforced concrete slabs. The strip method of design is relevant to many types of slabs including rectangular slabs with all sides supported and regular flat slabs with cantilevering parts. The author discusses unevenly distributed loads, concentrated loads and the influence of openings as well as joist floors and prestressed slabs. This book provides a practical guide for the designer demonstrating how to use the strip method in a wide range of design situations specific to a slab type. The method is illustrated throughout with numerical examples and the analysis is rationalised with approximations and formulas for the calculation of design moments.

Cement-based concrete has excellent properties as a construction material, and the raw materials of cement-rocks, and limestone and clay-are bountiful. Yet its production generates high quantities of CO2, making it a potentially unsustainable material. However, there are no alternatives to concrete and steel as basic methods for development of socioeconomic infrastructure at this time. Highlighting sustainability issues in the construction industry, The Sustainable Use of Concrete presents guidelines on how to move toward sustainable concrete construction. The book begins by clarifying the historic background and meaning of sustainability, after which it outlines areas that need to be considered in connection with sustainability in the concrete and construction field. It examines environmental, social and cultural, and economic aspects, then considers an evaluation system of sustainability. The authors include various tools and ISO standards, and then explore technologies for sustainability, with case studies and examples that promote understanding of current technologies. Although the construction sector, in the broadest sense, has come to recognize that infrastructure development over the past two centuries has been unsustainable, it has been slow to adjust. Comprehensive information and relevant practical guidance are very scarce. This book lays out a roadmap for creating a human-friendly and safe environment with low environmental burden.

As mankind searches for energy alternatives with minimal environmental consequences and acceptable cost, it is necessary to identify valid areas of endeavor that can activate favorable energy sources and technological developments. Toward that end, The Dynamics of Energy: Supply, Conversion, and Utilization develops competence in energy matters on three levels: basic concepts, essential computations, and dynamic modeling. The book reviews the laws of thermodynamics and rate relationships between flows and gradients as a foundation for subsequent topics. Using dynamic analysis, it examines the potential of current energy sources to serve the needs of a growing world economy. The text also describes key fossil conversion, renewable conversion, and utilization technologies. It presents a technique to assess efficiencies from ground (or harvest) to end use, explores the effects of energy use on the environment, and offers an introduction to dynamic modeling. The book concludes with a description of energy technologies that, if suitably employed, could configure a sustainable energy future. Studying the dynamics of thermal systems is conducive to ascertaining what technologies could indeed make a difference for a desirable energy future. Suitable response time to demand and acceptable fuel lifetimes are necessary conditions for energy systems to compete in the marketplace. The planning effort that should lead the energy endeavor requires projection of the time span of pollution effects. Harnessing the flexibility and speed of VisSim (TM) for dynamic modeling, this book provides the tools to model most thermal systems with moderate complexity. It also evaluates energy supplies, conversion, and end use.

Tasked by the Clean Water Act to restore and maintain the integrity of their waters, state and local governments must develop systems for assessing the health of the streams within their borders. They quickly find that one size does not fit all when it comes to sampling. Rapid Bioassessment of Stream Health examines the sampling techniques, laboratory methods, and data analysis necessary to create a protocol for analyzing the health of streams, using rapid bioassessment techniques. The editors explore how to determine reference streams in each ecoregion and subecoregion with specific indices of health. They provide field methods for monitoring and sampling invertebrates and laboratory methods for subsampling. The work focuses on the application of the EPA's Rapid Bioassessment Protocol (RBP) but suggests various techniques that can be used to improve sampling protocols and quality control, where necessary. It also includes general listings of health classifications, appendices of more than 300 streams that have been sampled, and a GIS method for designating the reference condition for purposes of comparison in each ecological unit. Although the EPA's RBP Manual is considered to be the standard of information on the types of metrics that can be used, this book explores, from a state regulatory standpoint, the practical development of such a system to begin compliance with critical sections of the Clean Water Act. A compendium of information about prioritizing those streams and small rivers requiring analysis, this book contains guidelines on the assessment of streams in a particular ecoregion and sampling streams that are at least impaired as points of comparison. It supplies guidance for the production of other rapid bioassessment tools customized to various ecoregions and subecoregions.

The growth in the world's nuclear industry, motivated by peaking world oil supplies, concerns about the greenhouse effect, and domestic needs for energy independence, has resulted in a heightened focus on the need for next-generation nuclear fuel-cycle technologies. Ion Exchange and Solvent Extraction: A Series of Advances, Volume 19 provides a comprehensive look at the state of the science underlying solvent extraction in its role as the most powerful separation technique for the reprocessing of commercial spent nuclear fuel. Capturing the current technology and scientific progress as it exists today and looking ahead to potential developments, the book examines the overall state of solvent extraction in reprocessing, new molecules for increased selectivity and performance, methods for predicting extractant properties, and actinide-lanthanide group separation. The contributors also explore the simultaneous extraction of radionuclides by mixing extractants, the cause and nature of third-phase formation, the effects of radiation on the solvent and its performance, analytical techniques for measuring process concentrations, new centrifugal contactors for more efficient processing, and new chemistry using novel media. The long-term vision of many professionals in the field entails a proliferation-free nuclear energy economy in which little or no waste is stored or released into the environment and all potential energy values in spent nuclear fuel are recycled. This text opens a window on that possibility, offering insight from world leaders on the cutting edge of nuclear research.

Limnology provides an in-depth and current overview of the field of limnology. The result of a major tour de force by two renowned and experienced experts, this unique and richly illustrated reference presents a wealth of data on limnology history, water as a substrate, lakes' origins and aquatic biota. Besides a general part, it gives special focus to neotropical limnology, prevalently applicable in countries in the Southern Hemisphere. Starting with the essentials, some definitions and a historical account, this volume then details the main interaction mechanisms with physical and chemical factors, diversity and geographical distribution. With regard to the major continental aquatic systems, it treats the dynamics, variability and characterization of lakes, reservoirs, flooded areas, saline lakes, estuaries and coastal lagoons. The impact of human activity on water resources and the need for the rehabilitation of watersheds, watershed ecosystems and estuaries are addressed subsequently. To illustrate theory, the final part includes research examples in limnology, ecology and environmental sciences in different geographical contexts, as well as ideas for new investigations. This reference volume is intended for researchers and professionals working on inland waters, lakes and rivers within the fields of biology, ecology, environment, forestry, geochemistry, geophysics, and water management. It will also benefit students in the aforementioned areas and readers involved with limnology in related disciplines, such as earth sciences, environmental, water and geological engineering.

Particulate discrete element analysis is becoming increasingly popular for research in geomechanics as well as geology, chemical engineering, powder technology, petroleum engineering and in studying the physics of granular materials. With increased computing power, practising engineers are also becoming more interested in using this technology for analysis in industrial applications. This is the first single work on Discrete Element Modelling (DEM) providing the information to get started with this powerful numerical modelling approach. Written by an independent author with experience both in developing DEM codes and using commercial codes, this book provides the basic details of the numerical method and the approaches used to interpret the results of DEM simulations. Providing a basic overview of the numerical method, Particulate Discrete Element Modelling discusses issues related to time integration and numerical stability, particle types, contact modelling and boundary conditions. It summarizes approaches to interpret DEM data so that users can maximize their insight into the material response using DEM. The aim of this book is to provide both users and prospective users of DEM with a concise reference book that includes tips to optimize their usage. Particulate Discrete Element Modelling is suitable both for first time DEM analysts as well as more experienced users. It will be of use to professionals, researchers and higher level students, as it presents a theoretical overview of DEM as well as practical guidance on running DEM simulations and interpreting DEM simulation data.

A successful modern heavy metal control program for any industry will include not only traditional water pollution control, but also air pollution control, soil conservation, site remediation, groundwater protection, public health management, solid waste disposal, and combined industrial-municipal heavy metal waste management. In fact, it should be a total environmental control program. Comprehensive in scope, Heavy Metals in the Environment provides technical and economical information on the development of a feasible total heavy metal control program that can benefit industry and local municipalities. The book discusses the importance and contamination of metals such as lead, chromium, cadmium, zinc, copper, nickel, iron, and mercury. It covers important research of metals in the environment, the processes and mechanisms for metals control and removal, the environmental behavior and effects of engineered metal and metal oxide nanoparticles, environmental geochemistry of high arsenic aquifer systems, nano-technology applications in metal ion adsorption, biosorption of metals, and heavy metal removal by expopolysaccharide-producing cyanobacteria. The authors delineate technologies for metals treatment and management, metal bearing effluents, metal-contaminated solid wastes, metal finishing industry wastes and brownfield sites, and arsenic-contaminated groundwater streams. They also discuss control, treatment, and management of metal emissions from motor vehicles. The authors reflect the breadth of the field and draw on personal experiences to provide an in-depth presentation of environmental pollution sources, waste characteristics, control technologies, management strategies, facility innovations, process alternatives, costs, case histories, effluent standards, and future trends for each industrial or commercial operation. The methodologies and technologies discussed are directly applicable to the waste management problems that must be met in all industries.

The design of structures in general, and prestressed concrete structures in particular, requires considerably more information than is contained in building codes. A sound understanding of structural behaviour at all stages of loading is essential. This textbook presents a detailed description and explanation of the behaviour of prestressed concrete members and structures both at service loads and at ultimate loads and, in doing so, provide a comprehensive and up-to-date guide to structural design. Much of the text is based on first principles and relies only on the principles of mechanics and the properties of concrete and steel, with numerous worked examples. However, where the design requirements are code specific, this book refers to the provisions of Eurocode 2: Design of Concrete Structures and, where possible, the notation is the same as in Eurocode 2. A parallel volume is written to the Australian Standard for Concrete Structures AS3600-2009. The text runs from an introduction to the fundamentals to in-depth treatments of more advanced topics in modern prestressed concrete structures. It suits senior undergraduate and graduate students and also practising engineers who want comprehensive introduction to the design of prestressed concrete structures. It retains the clear and concise explanations and the easy-to-read style of the first edition, but the content has been extensively re-organised and considerably expanded and updated. New chapters cover design procedures, actions and loads; prestressing systems and construction requirements; connections and detailing; and design concepts for prestressed concrete bridges. The topic of serviceability is developed extensively throughout. All the authors have been researching and teaching the behaviour and design of prestressed concrete structures for over thirty-five years and the proposed new edition of the book reflects this wealth of experience. The work has also gained much from Professor Gilbert active and long-time involvement in the development of standards for concrete buildings and concrete bridges.

Provides a Balance between the Mathematical and Physical Aspects and the Engineering Applications Written for engineering and science students, Mechanics of Groundwater in Porous Media explains groundwater from both a mathematical and qualitative standpoint. The book builds up the theory of groundwater flow starting from basic physics and geometric intuition, and on to applied practice through real-world engineering problems. It includes graphical illustrations as well as solved illustrative problems throughout the text. Considers the Steady-State Motion of Groundwater The book starts off by introducing the overall picture of groundwater, its relationship with the hydrological cycle, and other terminology used in the mechanics of groundwater flow though porous means. It presents a synopsis of basic definitions, concepts, and the fundamental principles of fluid mechanics and soil mechanics, which are necessary prerequisites for an adequate understanding of the book's core material. The engineering applications are deducted from geometric and physical reasoning, with a minimum use of mathematical abstraction. Mechanics of Groundwater in Porous Media is written primarily to serve as a textbook for senior undergraduate and upper-level graduate students in civil and environmental engineering, environmental science, hydrogeology, and geology, as well as a resource for practicing engineers.

Meshless, or meshfree methods, which overcome many of the limitations of the finite element method, have achieved significant progress in numerical computations of a wide range of engineering problems. A comprehensive introduction to meshless methods, Meshless Methods and Their Numerical Properties gives complete mathematical formulations for the most important and classical methods, as well as several methods recently developed by the authors. This book also offers a rigorous mathematical treatment of their numerical properties-including consistency, convergence, stability, and adaptivity-to help you choose the method that is best suited for your needs. Get Guidance for Developing and Testing Meshless Methods Developing a broad framework to study the numerical computational characteristics of meshless methods, the book presents consistency, convergence, stability, and adaptive analyses to offer guidance for developing and testing a particular meshless method. The authors demonstrate the numerical properties by solving several differential equations, which offer a clearer understanding of the concepts. They also explain the difference between the finite element and meshless methods. Explore Engineering Applications of Meshless Methods The book examines how meshless methods can be used to solve complex engineering problems with lower computational cost, higher accuracy, easier construction of higher-order shape functions, and easier handling of large deformation and nonlinear problems. The numerical examples include engineering problems such as the CAD design of MEMS devices, nonlinear fluid-structure analysis of near-bed submarine pipelines, and two-dimensional multiphysics simulation of pH-sensitive hydrogels. Appendices supply useful template functions, flowcharts, and data structures to assist you in implementing meshless methods. Choose the Best Method for a Particular Problem Providing insight into the special features and intricacies of meshless methods, this is a valuable reference for anyone developing new high-performance numerical methods or working on the modelling and simulation of practical engineering problems. It guides you in comparing and verifying meshless methods so that you can more confidently select the best method to solve a particular problem.

What makes this book unique is a specific focus on aluminum recovery, rather than just recycling in general. It also offers an integrated discussion of scrap recovery and re-melting operations and includes economic as well as technical elements of recycling. Important topics include a discussion of the scrap aluminum marketplace and how secondary aluminum is collected and sorted, the design and operation of furnaces for melting scrap, the refining of molten aluminum, and the recovery and processing of dross from re-melting operations. This second edition features more information on aluminum scrap pricing and the economics of recycling, the analysis of dross processing methods currently in use by the industry, and drosses produced. The book has been updated throughout to include the most up-to-date information.

A Design Aid for Structural Engineers Circular Storage Tanks and Silos, Third Edition effectively explains and demonstrates the concepts needed in the analysis and design of circular tanks. Tanks have to sustain high-quality serviceability over a long lifespan. This text covers computing the stresses in service in several chapters. It considers thermal stresses and the time-dependent stresses produced by creep and shrinkage of concrete and relaxation of prestressed steel. It also examines the effects of cracking and the means for its control. This text is universally applicable; no specific system of units is used in most solved examples. However, it is advantageous to use actual dimensions and forces on the structure in a small number of examples. These problems are set in SI units and Imperial units; the answers and the graphs related to these examples are given in the two systems. What's New in This Edition: Presents a new chapter on recommended practice for design and construction of concrete water tanks and liquefied natural gas tanks Includes a companion Website providing computer programs CTW and SOR Provides material on CTW (Cylindrical Tank Walls); with simple input, it performs analysis for load combinations anticipated in the design of cylindrical walls with or without prestressing Contains the finite-element computer program SOR (Shells of Revolution); it performs analysis for design of axisymmetrical shells of general shapes This guide is an authoritative resource for the analysis and design of circular storage tanks and silos.

Many books focus on individual differences and how those relate to traffic safety such as accident proneness, gender differences, age, alcohol, and the effects of drugs. Others focus on the safety effects regarding the vehicle such as airbags, anti-lock brakes, navigation systems, intelligent cruise control and other new gadgets coming to the vehicle. Even though these topics are undoubtedly important for traffic safety, this book takes a unique approach as it focuses solely on the road environment. Designing Safe Road Systems provides the background for those who want to know more about the effects of road design on driving behaviour. It uses a systems approach to allow a better understanding of why and in what circumstances drivers may commit errors. This understanding will ultimately lead to road systems that prevent (fatal) errors from occurring. The book contains an overview of the current models and theories about human performance and human behaviour in traffic that are relevant for all those involved in designing safe road systems. The central theme of this book is how design principles can reduce the probability of an error while driving. The authors demonstrate how knowledge of human factors helps a road authority to better understand how road users behave. They argue that in many cases the design of the environment can be further adjusted to human capabilities, and that safety should be considered a system property to be built into the road system.