The results in this dissertation set the ground to answer a fundamental question in data-driven polymer material science: "Why don't prepared composites show less fatigue than the pure plastics?" A simultaneous analysis of mechanical testing and small angle X-Ray scattering from the DESY source in Hamburg has been applied to approach this question, which is also central to the European research project "Nanotough", and the results are clearly presented in this book. The evolution of the materials structure is visualized and quantitatively analyzed from exhaustive sequences of scattering images. Three different classes of polymer composites are presented as typical and illustrative examples. The obtained results illustrate that the interactions of their components can cause unpredictable structural effects, ultimaltely leading to a weakening of the material, where a reinforcement was expected.

Disorder is everywhere, inherently present in nature, and is commonly believed to be a synonymous with disturbance. As a consequence, the methodical and customary study of the dynamics of the electromagnetic field, both in the linear and nonlinear optical regimes, leans to rule out it from the treatment. On the other hand, nonlinearity enriches the physical disciplines and brings them closer to reality with respect to the linear approximation. Nonlinearity allows to stimulate a wide and rich ensemble of optical responses that beautifies the role of matter in the active processes with electromagnetic fields. Independently of each other, both of these mechanisms foster localization of light. What happens when light enlightens their synergistic interaction? When pushed together, light, disorder and nonlinearity make new and intriguing phenomena emerge. This text provides a comprehensive investigation of the role of disorder in the nonlinear optical propagation both in transparent media and lasers. Eventually, disorder promotes and enhances complex nonlinear dynamics opening new perspectives in applied research driven by the processes of localization of the electromagnetic field. The first experimental study of laser emission in granular media unveils how randomness magnifies and largely affect laser-matter interactions. Viola Folli in her research work touches and deepens the leading milestones of the new science named Complex Photonics.

The advent of laser cooling of atoms led to the discovery of ultra-cold matter, with temperatures below liquid Helium, which displays a variety of new physical phenomena. "Physics of Ultra-Cold Matter" gives an overview of this recent area of science, with a discussion of its main results and a description of its theoretical concepts and methods.
Ultra-cold matter can be considered in three distinct phases: ultra-cold gas, Bose Einstein condensate, and Rydberg plasmas. This book gives an integrated view of this new area of science at the frontier between atomic physics, condensed matter, and plasma physics. It describes these three distinct phases while exploring the differences, as well as the sometimes unexpected similarities, of their respective theoretical methods.
This book is an informative guide for researchers, and the benefits are a result from an integrated view of a very broad area of research, which is limited in previous books about this subject. The main unifying tool explored in this book is the wave kinetic theory based on Wigner functions. Other theoretical approaches, eventually more familiar to the reader, are also given for extension and comparison. The book considers laser cooling techniques, atom-atom interactions, and focuses on the elementary excitations and collective oscillations in atomic clouds, Bose-Einstein condensates, and Rydberg plasmas. Linear and nonlinear processes are considered, including Landau damping, soliton excitation and vortices. Atomic interferometers and quantum coherence are also included.

This book highlights a comprehensive introduction of graphene and graphene-based two-dimensional nanomaterials, covering topics from their atomic structures, electronic band structures, and fundamental properties to technological applications. The book provides fundamental physics knowledge covering quantum mechanics, the theory of relativity, solid-state physics, and topology geometry necessary to understand electronic band structure of graphene. Other topics including microscopy techniques and preparation methods of graphene are also presented. Adopting an easy-to-read style, the book is a valuable resource for researchers in physics, chemistry, materials science, and engineers who are interested in the field of graphene-based nanomaterials.

Corrosion is a high-cost and potentially hazardous issue in numerous industries. The potential use of diverse carbon nanoallotropes in corrosion protection, prevention and control is a subject of rising attention. This book covers the current advancements of carbon nanoallotropes in metal corrosion management, including the usage of nanostructure materials to produce high-performance corrosion inhibitors and corrosion-resistant coatings.

The present book covers the transport properties of superconductor/two dimensional electron gas Josephson junctions. Starting with the basic el ement, a superconductor/two dimensional electron gas interface, phase co herent Andreev reflection in hybrid Josephson junctions is introduced and further on, multiterminal structures are discussed. Special care is taken on explaining the underlying theoretical concepts related to the transport mech anisms. Employing a two dimensional electron gas in a semiconductor as a normal conductor opens up the possibility to observe effects not found in purely metallic junctions. One example is the light sensitivity of the semi conductor, which has a direct impact on the supercurrent in the Josephson junction. Many of the effects reported here rely on the fast technological progress in the epitaxial growth of III V semiconductor heterostructures. By using these layer systems, fascinating quantum effects have been found. Two examples out of many are the quantized conductance in a point contact and electron optics using ballistic electron beams. By combining heterostructures with su perconductors, many of the effects found in purely semiconductor systems can in a sense, be transferred to the superconducting state. A prominent example is the quantization of the critical current in a superconducting quantum point contact.

As the characteristic dimensions of electronic devices continue to shrink, the ability to characterize their electronic properties at the nanometer scale has come to be of outstanding importance. In this sense, Scanning Probe Microscopy (SPM) is becoming an indispensable tool, playing a key role in nanoscience and nanotechnology. SPM is opening new opportunities to measure semiconductor electronic properties with unprecedented spatial resolution. SPM is being successfully applied for nanoscale characterization of ferroelectric thin films. In the area of functional molecular materials it is being used as a probe to contact molecular structures in order to characterize their electrical properties, as a manipulator to assemble nanoparticles and nanotubes into simple devices, and as a tool to pattern molecular nanostructures. This book provides in-depth information on new and emerging applications of SPM to the field of materials science, namely in the areas of characterisation, device application and nanofabrication of functional materials. Starting with the general properties of functional materials the authors present an updated overview of the fundamentals of Scanning Probe Techniques and the application of SPM techniques to the characterization of specified functional materials such as piezoelectric and ferroelectric and to the fabrication of some nano electronic devices. Its uniqueness is in the combination of the fundamental nanoscale research with the progress in fabrication of realistic nanodevices. By bringing together the contribution of leading researchers from the materials science and SPM communities, relevant information is conveyed that allows researchers to learn more about the actual developments in SPM applied to functional materials. This book will contribute to the continuous education and development in the field of nanotechnology.

This thesis presents an in-depth study on the effect of colloidal particle shape and formation mechanism on self-organization and the final crystal symmetries that can be achieved. It demonstrates how state-of-the-art X-ray diffraction techniques can be used to produce detailed characterizations of colloidal crystal structures prepared using different self-assembly techniques, and how smart systems can be used to investigate defect formation and diffusion in-situ. One of the most remarkable phenomena exhibited by concentrated suspensions of colloidal particles is the spontaneous self-organization into structures with long-range spatial and/or orientational orders. The study also reveals the subtle structural variations that arise by changing the particle shape from spherical to that of a rounded cube. In particular, the roundness of the cube corners, when combined with the self-organization pathway, convective assembly or sedimentation, was shown to influence the final crystal symmetries.

This book addresses novel electronic and thermoelectronic properties arising from topological spin textures as well as topologically non-trivial electronic structures. In particular, it focuses on a unique topological spin texture, i.e., spin hedgehog lattice, emerging in a chiral magnet and explore its novel properties which are distinct from the conventional skyrmion lattice, and discusses the possibility of realizing high-temperature quantum anomalous Hall effect through quantum confinement effect in topological semimetal. This book benefits students and researchers working in the field of condensed matter physics, through providing comprehensive understanding of the current status and the outlook in the field of topological magnets.

This book sheds light on the molecular aspects of liquids and liquid-based materials such as organic or inorganic liquids, ionic liquids, proteins, biomaterials, and soft materials including gels. The reader discovers how the molecular basics of such systems are connected with their properties, dynamics, and functions. Once the use and application of liquids and liquid-based materials are understood, the book becomes a source of the latest, detailed knowledge of their structures, dynamics, and functions emerging from molecularity. The systems discussed in the book have structural dimensions varying from nanometers to millimeters, thus the precise estimation of structures and dynamics from experimental, theoretical, and simulation methods is of crucial importance. Outlines of the practical knowledge needed in research and development are helpfully included in the book.

This book presents recent developments and future scopes of glassy systems, such as their electrical and optical properties, use as electrodes, photonics devices, battery applications and others, which are of great interest for material scientists and professionals. Each chapter is designed to increase coherence, containing examples and question sets as exercises for in-depth understanding of the text. It provides a valuable resource for researchers, professionals and students in the area of material research especially on Li-doped glasses.

191 Apart from numerous difficulties arising from the high pressure technique as such, there is a natural limitation to the possibility of applying a hydrostatic pressure, since liquids under pressure will solidify above a certain pressure limit. 8 2 Up to pressures of 3 X 10 kg.jm. at room temperature, a liquid like isopentane can be used. For higher pressures helium gas may be used, perhaps to about 9 2 10 kg.jm. , but BRIDGMAN already encountered enormous leakage difficulties 7 when using this gas at 7.10 kg.jm.2 at 90 Degrees K. A solution has been found by applying mechanical pressure for the range 8 9 2 between 3 X 10 and 10 kg.jm. , by using silver chloride as transmittant. In this case, however, one has to apply unknown corrections for shearing stress and deformation of the sample, a problem which BRIDGMAN solved experimentally by a determination of the resistivity in the pressure region between 2 and 8 2 5 X 10 kg.jm. , by the hydrostatic and by the mechanical pressure method as well, and applying the correction factor thus determined to the results obtained at higher pressures. Though this method seems to be right in good approximation, the data for the highest pressures are to be considered as less accurate.

Soft matter and biological systems pose many challenges for theoretical, experimental and computational research. From the computational point of view, these many-body sytems cover variations in relevant time and length scales over many orders of magnitude. Indeed, the macroscopic properties of materials and complex fluids are ultimately to be deduced from the dynamics of the microsopic, molecular level. In these lectures, internationally renowned experts offer a tutorial presentation of novel approaches for bridging these space and time scales in realistic simulations. This volume addresses graduate students and nonspecialist researchers from related areas seeking a high-level but accessible introduction to the state of the art in soft matter simulations.

Phase transitions in which crystalline solids undergo structural changes present an interesting problem in the interplay between the crystal structure and the ordering process. This text, intended for readers with some prior knowledge of condensed-matter physics, emphasizes the basic physics behind such spontaneous structural changes in crystals. Starting with the relevant thermodynamic principles, the book discusses the nature of order variables and their collective motion in a crystal lattice; in a structural phase transition a singularity in such a collective mode is responsible for the lattice instability, as revealed by soft phonons. This mechanism is analogous to the interplay of a charge-density wave and a periodically deformed lattice in low-dimensional conductors. The text also describes experimental methods for modulated crystal structures and gives examples of structural changes in representative systems. The book is divided into two parts. The first, theoretical, part includes such topics as: the Landau theory of phase transitions; statistics, correlations and the mean-field approximation; pseudospins and their collective modes; soft lattice modes and pseudospin condensates; lattice imperfections and their role in the phase transitions of real crystals. The second part discusses experimental studies of modulated crystals using x-ray diffraction, neutron inelastic scattering, light scattering, dielectric measurements, and magnetic resonance spectroscopy.

The book is devoted to the application of phase-field (diffuse interface) models in materials science. Phase-field modeling emerged only recently as a theoretical approach to tackle questions concerning the evolution of materials microstructure, the relation between microstructure and materials properties and the transformation and evolution of different phases. This volume brings together the essential thermodynamic ideas as well as the essential mathematical tools to derive phase-field model equations. Starting from an elementary level such that any graduate student familiar with the basic concepts of partial differential equations can follow, it shows how advances in the field of phase-field modeling will come from a combination of thermodynamic, mathematical and computational tools. Also included are two extensive examples of the application of phase-field models in materials science.

Ion implantation offers one of the best examples of a topic that starting from the basic research level has reached the high technology level within the framework of microelectronics. As the major or the unique procedure to selectively dope semiconductor materials for device fabrication, ion implantation takes advantage of the tremendous development of microelectronics and it evolves in a multidisciplinary frame. Physicists, chemists, materials sci entists, processing, device production, device design and ion beam engineers are all involved in this subject. The present monography deals with several aspects of ion implantation. The first chapter covers basic information on the physics of devices together with a brief description of the main trends in the field. The second chapter is devoted to ion im planters, including also high energy apparatus and a description of wafer charging and contaminants. Yield is a quite relevant is sue in the industrial surrounding and must be also discussed in the academic ambient. The slowing down of ions is treated in the third chapter both analytically and by numerical simulation meth ods. Channeling implants are described in some details in view of their relevance at the zero degree implants and of the available industrial parallel beam systems. Damage and its annealing are the key processes in ion implantation. Chapter four and five are dedicated to this extremely important subject."

The Tenth International Symposium on Continuum Models and Discrete Systems (CMDSIO) took place at the Shoresh Holiday Complex in Shoresh, Israel, near the Capital City Jerusalem, from 30 June until 4 July 2003. The previous symposia in this series were: CMDS 1 (Kielce, Poland, 1975) CMDS2 (Mont Gabriel, Canada, 1977) CMDS3 (Freudenstadt, German Federal Republic, 1979) CMDS4 (Stockholm, Sweden, 1981) CMDS5 (Nottingham, England, 1985) CMDS6 (Dijon, France, 1989) CMDS7 (Paderborn, Germany, 1992) CMDS8 (Varna, Bulgaria, 1995) CMDS9 (Istanbul, Turkey, 1998) As in the previous symposia, participation was by invitation from the Inter- national Scientific Committee. Participants were chosen from a list of recom- mendations of the committee members, as well as from applications following advertisement of the symposium on the internet and in email messages to po- tential participants. The members of the International Scientific Committee were: Karl-Heinz Anthony CMDS7 Chairman (University ofPaderborn, Germany) David J. Bergman, Conference Chairman (Tel Aviv University, Israel) Bikas K. Chakrabatii (Saha Institute of Nuclear Physics Calcutta, West Bengal, India) Hans Jurgen Herrmann (University of Stuttgart, Germany; and ESPCI, Paris, France) Esin Inan, CMDS9 Chairwoman (Istanbul Technical University, Istanbul, Turkey) Dominique Jeulin (ENSMP, Fontainebleau, France) Mark Kachanov (Tufts University, Boston, MA, USA) David Kinderlehrer (Carnegie-Mellon University, Pittsburgh, PA, USA) Arnold M. Kosevich (B. Verkin Institute for Low Temperature Physics, Khat"kov, Ukraine) Valery M. Levin (Petrozavodsk State University, Petrozavodsk, Russia) Konstantin Z.

This book presents an analysis of the techniques used for the synthesis of innovative functional carbon nanostructures. The chapters describe the research and development of various layered carbon nanostructures. Emphasis is given to the impact of defects on carbon nanostructures. The application of carbon nanostructured materials in biomedical field and energy storage is described.

-Polyelectrolyte Stars and Cylindrical Brushes By Y. Xu, F. Plamper, M. Ballauff, and A. H. E. Muller -Various Aspects of the Interfacial Self-Assembly of Nanoparticles By N. Popp, S. Kutuzov, A. Boker -Holographic Gratings and Data Storage in Azobenzene-Containing Block Copolymers and Molecular Glasses By H. Audorff, K. Kreger, R. Walker, D. Haarer, L. Kador, and H.-W. Schmidt -Donor-Acceptor Block Copolymers with Nanoscale Morphology for Photovoltaic Applications By M. Sommer, S. Huettner, and M. Thelakkat -Recent Advances in the Improvement of Polymer Electret Films By D. P. Erhard, D. Lovera, C. von Salis-Soglio, R. Giesa, V. Altstadt, and H.-W. Schmidt

This book describes most recent progress in the properties, synthesis, characterization, modelling, and applications of nanomaterials and nanodevices. It begins with the review of the modelling of the structural, electronic and optical properties of low dimensional and nanoscale semiconductors, methodology of synthesis, and characterization of quantum dots and nanowires, with special attention towards Dirac materials, whose electrical conduction and sensing properties far exceed those of silicon-based materials, making them strong competitors. The contributed reviews presented in this book touch on broader issues associated with the environment, as well as energy production and storage, while highlighting important achievements in materials pertinent to the fields of biology and medicine, exhibiting an outstanding confluence of basic physical science with vital human endeavor. The subjects treated in this book are attractive to the broader readership of graduate and advanced undergraduate students in physics, chemistry, biology, and medicine, as well as in electrical, chemical, biological, and mechanical engineering. Seasoned researchers and experts from the semiconductor/device industry also greatly benefit from the book's treatment of cutting-edge application studies.

Clusters and nanoscale materials give rise to properties and behaviour that are governed by size restrictions, and hence display features directly attributable to quantum confinement. Thus they represent ideal media for observing and studying quantum phenomena. This book presents and evaluates some of the latest developments in this area of basic research. Each of the chapters focuses on selected aspects of the field, and the authors endeavour to display the breadth of the subject by presenting some of the important recent advances that have been made through the use of new experimental techniques and theoretical approaches.

Within nonlinear spatio-temporal dynamics, active lattice systems are of relevance to the study of multi-dimensional dynamical systems and the theory of nonlinear waves and dis- sipative structures of extended systems. In this book, the authors deal with basic concepts and models, with methodolo- gies for studying the existence and stability of motions, understanding the mechanisms of formation of patterns and waves, their propagation and interactions in active lattice systems, and about how much cooperation or competition bet- ween order and chaos is crucial for synergetic behavior and evolution. The results described in the book have both in- ter- and trans-disciplinary features and a fundamental cha- racter. It is a textbook for graduate courses in nonlinear sciences, including physics, biophysics, biomathematics, bioengineering, neurodynamics, electrical and electronic engineering, mathematical economics, and computer sciences.

This book is devoted to interfaces between two fluids, that is, between a liquid and a gas (such as water and air) or between two liquids (such as water and oil). The main motivation for the book is twenty years of experimentation in the microgravity environment of space, and the associated theory. This unique environment has made possible numerous qualitative and quantitative observations of effects that are masked by gravity on earth. Large liquid surfaces have been created and their stability and dynamics have been studied. The experimental insights gained have, in turn, strongly stimulated further theoretical and mathematical investigations. Advancing and receding contact angles, wetting barriers, pinning of contact lines, oscillations of capillary surfaces and fluid sloshing are also discussed.

Properties of systems with long range interactions are still poorly understood despite being of importance in most areas of physics. The present volume introduces and reviews the effort of constructing a coherent thermodynamic treatment of such systems by combining tools from statistical mechanics with concepts and methods from dynamical systems. Analogies and differences between various systems are examined by considering a large range of applications, with emphasis on Bose--Einstein condensates. Written as a set of tutorial reviews, the book will be useful for both the experienced researcher as well as the nonexpert scientist or postgraduate student.

This thesis describes lyotropic chromonic liquid crystals (LCLCs) with exotic elastic and viscous properties. The first part of the thesis presents a thorough analysis of the elastic and viscous properties of LCLCs as functions of concentration, temperature and ionic contents, while the second part explores an active nematic system: living liquid crystals, which represent a combination of LCLC and living bacteria. LCLCs are an emerging class of liquid crystals that have shown profound connections to biological systems in two aspects. First, the assembly process of the chromonic aggregates is essentially the same as DNA oligomers and other super-molecular assemblies of biological origin. LCLCs thus provide an excellent model system for studying physical properties such as the elasticity and viscosity of these supramolecular assemblies. Second, LCLCs are biocompatible, thus serving as a unique anisotropic matrix to interface with living systems such as bacteria. This thesis deepens our understanding of both aspects. The noncovalent nature of chromonic aggregation produces the unique viscoelasticity to be found in LCLCs, which differs dramatically from that of traditional LCs. Anisotropic interactions between LCLCs and bacteria lead to fascinating phenomena such as the deformation of LCLCs with a characteristic wavelength determined by the elasticity of the LCLCs and the activity of the bacteria, orientationally controlled trajectories of bacteria and visualization of 24 nm flagella motion.