Nanomaterials and nanostructures are the original product of nanotechnology, and they are the key building blocks for enabling technologies. In this context, this book presents a concise overview of the synthesis and characterization methods of nanomaterials and nanostructures, while integrating facets of physics, chemistry, and engineering. The book summarizes the fundamentals and technical approaches in synthesis, and processing of nanostructures and nanomaterials, giving the reader a systematic and quick picture of the field. The text focuses on functional aspects of nanomaterials that have a high relevance to immediate applications, such as catalysis, energy harvesting, biosensing, and surface functionalization. There are chapters addressing nanostructured materials and composites, and covering basic properties and requirements of this new class of engineered materials.

These proceedings contain the papers presented at the 4th International Symposium on Engineering Turbulence Modelling and Measurements held at Ajaccio, Corsica, France from 24-26 May 1999. It follows three previous conferences on the topic of engineering turbulence modelling and measurements.
The purpose of this series of symposia is to provide a forum for presenting and discussing new developments in the area of turbulence modelling and measurements, with particular emphasis on engineering-related problems.
Turbulence is still one of the key issues in tackling engineering flow problems. As powerful computers and accurate numerical methods are now available for solving the flow equations, and since engineering applications nearly always involve turbulence effects, the reliability of CFD analysis depends more and more on the performance of the turbulence models. Successful simulation of turbulence requires the understanding of the complex physical phenomena involved and suitable models for describing the turbulent momentum, heat and mass transfer. For the understanding of turbulence phenomena, experiments are indispensable, but they are equally important for providing data for the development and testing of turbulence models and hence for CFD software validation.

This book provides an introduction to topological matter, with a focus on insulating bulk systems. A number of prerequisite concepts and tools are first laid out, including the notion of symmetry transformations, the band theory of semiconductors and aspects of electronic transport. The main part of the book discusses realistic models for both time-reversal-preserving and -violating topological insulators, as well as their characteristic responses to external perturbations. Special emphasis is given to the study of the anomalous electric, thermal and thermoelectric transport properties, the theory of orbital magnetisation, and the polar Kerr effect. The topological models studied throughout this book become unified and generalised by means of the tenfold topological-classification framework and the respective systematic construction of topological invariants. This approach is further extended to topological superconductors and topological semimetals. This book covers a wide range of topics and aims for a transparent presentation of the technical aspects involved. For this purpose, homework problems are also provided in dedicated hands-on sections. Given its structure, and the required background level of the reader, this book is particularly recommended for graduate students or researchers who are new to the field.

Manufacturing operations are the real wealth creators within a business, accounting for the majority of management and financial assets needed to sustain the company. Make it encapsulates the author's many years of experience gained designing manufacturing systems and supply-chains in factories across the world. It provides a proven, logical sequence of events needed to design effective modular factories capable of competing with the world's best.

In their 1999 'Best-Managed' Companies Awards, 'Aviation Week and Space Technology' (Vol. 150, No. 22) quoted the author's former company, Lucas Aerospace, as achieving 'Most improved major aerospace company 1994 - 1998' status, ranking it second in Competitiveness, assessed by an amalgamation of asset utilisation, productivity and financial stability.
This book has been written for managers charged with the responsibility for improving business profitability and for engineers facing the challenge of introducing more cost effective manufacturing processes. Many manufacturing businesses have failed to invest adequate resources in designing factory operations, mainly due to the lack of expertise and detailed knowledge needed to undertake this demanding task.
John Garside is a Principal Fellow at Warwick International Manufacturing Group, The University of Warwick. This follows an extensive industrial career in highly competitive first tier system and component manufacturing businesses, who supplied many of the world's leading aerospace, automotive and industrial equipment makers.
Written in a concise style giving ready access to information.
Provides detailed checklists allowing managers to make informed judgements concerning the critical resources needed to meet and exceed customer expectations.
Informs you how to 'Make it ' imparting practical knowledge on how to create world class factories.

Engineers need to be familiar with the fundamental principles and concepts in materials and structures in order to be able to design structurers to resist failures. For 4 decades, this book has provided engineers with these fundamentals.

Thoroughly updated, the book has been expanded to cover everything on materials and structures that engineering students are likely to need. Starting with basic mechanics, the book goes on to cover modern numerical techniques such as matrix and finite element methods. There is also additional material on composite materials, thick shells, flat plates and the vibrations of complex structures. Illustrated throughout with worked examples, the book also provides numerous problems for students to attempt.
New edition introducing modern numerical techniques, such as matrix and finite element methods
Covers requirements for an engineering undergraduate course on strength of materials and structures

With the gradual development of rules for designing against instability the idea emerged, in London, in 1974 to hold an International Colloquium treating every aspect of structural instability of steel structures.
There have been 17 International Colloquia Stability Sessions around the world, starting with the first one in Paris in 1972, until with the last one in Nagoya in 1997. In Nagoya it was decided to continue the series of travelling colloquia by launching the Sixth Colloquium in September 1999 with the First Session to be held at the "Politehnica" University of Timişoara, Romania, which will be followed by another in the year 2000 at the Gediminas Technical University in Vilnius, Lithuania, a third one during SSRC's Year 2000 Annual Meeting in the US, and a fourth one in Australia or New Zealand.
At present important research projects are in progress around the world, like SAC Joint Venture Project in USA, INCO-COPERNICUS "RECOS" in Europe and others, which are devoted to improve and develop new methods for the safety design of steel structures in seismic zones. Special attention is paid in Europe, USA and Japan to improve the design codes and detailing of seismic resistant steel structures.
This was the reason to organise the Session of Nagoya as "Stability and Ductility of Steel Structures" Colloquium. Romania is also a strong seismic territory and therefore, the topic of the Timişoara Session covered both stability and ductility problems. The technical programme of the SDSS'99 Colloquium in Timişoara has been split into nine working sessions.

The inspiration for this book came from an American Carbon Society Workshop entitled "Carbon Materials for Advanced Technologies" which was hosted by the Oak Ridge National Laboratory in 1994. Chapter 1 contains a review of carbon materials, and emphasizes the structure and chemical bonding in the various forms of carbon, including the four allotropes diamond, graphite, carbynes, and the fullerenes. In addition, amorphous carbon and diamond films, carbon nanoparticles, and engineered carbons are discussed. The most recently discovered allotrope of carbon, "i.e.," the fullerenes, along with carbon nanotubes, are more fully discussed in Chapter 2, where their structure-property relations are reviewed in the context of advanced technologies for carbon based materials. The synthesis, structure, and properties of the fullerenes and nanotubes, and modification of the structure and properties through doping, are also reviewed. Potential applications of this new family of carbon materials are considered. The manufacture and applications of adsorbent carbon fibers are discussed in Chapter 3. The manufacture, structure and properties of high performance fibers are reviewed in Chapter 4, and the manufacture and properties of vapor grown fibers and their composites are reported in Chapter 5. The properties and applications of novel low density composites developed at Oak Ridge National Laboratory are reported in Chapter 6. Coal is an important source of energy and an abundant source of carbon. The production of engineering carbons and graphite from coal via a solvent extraction route is described in Chapter 7. Applications of activated carbons are discussed in Chapters 8-10, including their use in the automotive arena as evaporative loss emission traps (Chapter 8), and in vehicle natural gas storage tanks (Chapter 9). The application of activated carbons in adsorption heat pumps and refrigerators is discussed in Chapter 10. Chapter 11 reports the use of carbon materials in the fast growing consumer electronics application of lithium-ion batteries. The role of carbon materials in nuclear systems is discussed in Chapters 12 and 13, where fusion device and fission reactor applications, respectively, are reviewed. In Chapter 12 the major technological issues for the utilization of carbon as a plasma facing material are discussed in the context of current and future fusion tokamak devices. The essential design features of graphite moderated reactors, (including gas-, water- and molten salt-cooled systems) are reviewed in Chapter 13, and reactor environmental effects such as radiation damage and radiolytic corrosion are discussed. The fracture behaviour of graphite is discussed in qualitative and quantitative terms in Chapter 14. The applications of Linear Elastic Fracture Mechanics and Elastic-Plastic Fracture Mechanics to graphite are reviewed and a study of the role of small flaws in nuclear graphites is reported.

The rapid technological developments during the later half of the 20th century have demanded materials that are stronger, capable of use at much higher temperatures, more corrosion-resistant, and much less expensive than those currently used. These demands become even more significant on the threshold of the new century and the millennium. Significant improvements in properties can only be achieved by processing the materials under far-from-equilibrium (or non-equilibrium) conditions. Several new processing technologies have been developed during the past few decades including, rapid solidification, spray forming, mechanical alloying, ion mixing, vapor deposition, laser processing and plasma processing.

Remarkable advances have been made in recent years in the science and technology of these processes used to synthesize, characterize, and apply these materials processed under non-equilibrium conditions. Some of these techniques have evolved from laboratory curiosity to commercial-scale manufacturing in just a few years. In other cases, industrial necessity prompted development of the technology, and the science followed later.

The chapters in this book have been written by people who are world-recognized experts in their respective fields. Each chapter describes the principles, processing techniques, special features of the materials produced, and their applications. An extensive list of references is provided at the end of each chapter that will facilitate location of additional information on specific aspects of any technique.

This collection of 185 papers results from contributions made at Electroceramics VI which forms part of the joint triple meeting held in Montreaux, Switzerland in August 1998. The joint meeting covered recent advances in the broad and rapidly progressing field of electroceramics, ferroelectrics and polar dielectrics. More than 550 papers were presented at the triple meeting (250 of them at Electorceramics VI '98) including a series of plenary lectures highlighting research areas of strong current and emerging interests. The meeting demonstrated the wide variety of new applications being developed, based in particular on ferroelectrics, polar dielectrics, ionic conductors and any other functional ceramics.

In comparison with previous meetings, the present one showed the growing importance of surfaces, interfaces and other boundaries, e.g. domain walls. Size effects and questions related to nanotechnology were comprehensively discussed both on the academic level and for device realizations. Microdevices and their integration problems (and solutions) were at the heart of many reports. The papers reflected the extensive activities in this interdisciplinary area, while the balance between presentations from academic laboratories and from industrial R&D laboratories was a testimony to its vitality. The volume contains 185 papers selected after refereeing of the 220 papers submitted for publication.

The sea is steadily rising, presently at 3.4 mm per year, and it is already costing billions in Venice, on the Thames river and in New York City, to counter sea-level-related surges. Experts anticipate an accelerated rise, and credible predictions for sea-level rise by the year 2100 range from 12 inches to above six feet. Study of the Earth's geologic history, through ice-core samples, links sea-level rise to temperature rise. Since the lifetime of carbon dioxide in the atmosphere is measured in centuries, and it has upset the balance of incoming and outgoing energy, the Earth's temperature will continue to rise, even if carbon burning ceases. Engineering the Earth's solar input appears increasingly attractive and practical as a means to lower the Earth's temperature and, thus, to lower the sea level. The cost of engineering the climate appears small; comparable, even, to the already-incurred costs of sea-level rise represented by civil engineering projects in London, Venice and New York City. Feasible deployment of geoengineering, accompanied by some reduction in carbon burning, is predicted to lower the sea level by the order of one foot by 2100, which negates the expected rise and would provide an immense economic benefit. The accompanying lower global temperature would reduce the severity of extreme weather and restore habitability to lethally hot parts of the world.

Over the last several years, the four authors have jointly conducted research into the analysis of vibrating Mindlin plates as a collaborative project between Nanyang Technological University, The National University of Singapore, and The University of Queensland. The research was prompted by the fact that there is a dearth of vibration results for Mindlin plates when compared to classical thin plate solutions. To generate the vibration results, the authors have successfully employed the Ritz method for general plate shapes and boundary conditions. The Ritz method, once thought to be awkward for general plate analysis, can be automated through suitable trial functions (for displacements) that satisfy the geometric plate boundary conditions "a priori." This work has been well-received by academics and researchers, as indicated by the continual requests for the authors' papers and the Ritz software codes. This monograph is written with the view to share this so-called "p"-Ritz method for the vibration analysis of Mindlin plates and its software codes with the research community. To the authors' knowledge, the monograph contains the first published Ritz plate software codes of its kind.

The progress in device technologies are surveyed in this volume. Included are Si/ (Si-Ge) heterojunctions for high-speed integrated circuits. Schottky-barrier arrays in Si and Si-Ge alloys for infrared imaging, III-V quantum-well detector structures operated in the heterodyne mode for high-data-rate communications, and III-V heterostructures and quantum-wells for infrared transmissions.

This book examines the physical testing of textiles in the form of fibre, yarn and fabric, the emphasis throughout eing on standard and reproducible tests. After an introductory explanation of sampling and measurement, the author explores the effects of moisture on textiles, then goes on to discuss fibre dimension, yarn tests for linear density, twist, evenness and hairiness, tensile strength, and dimensional stability and serviceability. Also covered are aspects of comfort and fabric handle, colour fastness and quality assurance. The book's comprehensive coverage of the physical properties of textiles makes it an essential reference for managers in the textiles industry concerned with quality assurance, garment and fabric technologists, and students of textile science and engineering.

As plastics are being used more extensively in high-performance markets, it is imperative that designers and engineers understand all aspects of polymer behavior over an extended service life. Dynamic Mechanical Analysis for Plastics Engineering describes practical uses for DMA information. All of the information for 120 families of thermoplastics is based on independent test data conducted exclusively for this product and is not available through any other source. This PDL addition shows how to use the DMA data to predict, at various temperatures, each materials estimated service life and potential for failure. This book explains the correlation between time and temperature-dependence and illustrates how time-dependent responses such as creep and stress relaxation affect the practical utility of different materials. Basic polymer structures are discussed and test results show how these structural details can be detected and understood.

These proceedings contain the reviewed papers presented at the Symposium J on "Ion Implantation into Semiconductors, Oxides and Ceramics," which was held at the Spring Meeting of the European Materials Research Society in Strasbourg, France, 16-19, June 1998. The symposium attracted 110 contributions, with authors from 31 nations in 5 continents. It was thereby the largest in a series of E-MRS ion beam symposia, documenting the importance of ion beam techniques and research in this area.
The aim of this symposium was to provide a forum for the discussion of new results in the implantation of materials from three different classes: semiconductors, oxides and ceramics.

While research on ultrasonics has been covered in earlier volumes of the Physical Acoustics series, Volumes 23 and 24 demonstrate the successful commercialization of devices and instruments arising from research in this area. These volumes will assist in the process of bringing research output into the marketplace to the benefit of customers.
The chapters are liberally illustrated with pictures of actual commercial objects which have been or are in use. Included are Medical Ultrasonic Diagnostics, Nondestructive Testing (NDT), Acoustic Emission, Process Control, Surface Acoustic Wave (SAW) Devices, Frequency Control Devices, Research Instruments, Transducers, and Ultrasonic Microscopes. Also contained in the text are six essays covering technology transfer and commercialization.

While research on ultrasonics has been covered in earlier volumes of the Physical Acoustics series, Volumes 23 and 24 demonstrate the successful commercialization of devices and instruments arising from research in this area. These volumes will assist in the process of bringing research output into the marketplace to the benefit of customers.
The chapters are liberally illustrated with pictures of actual commercial objects which have been or are in use. Included are Medical Ultrasonic Diagnostics, Nondestructive Testing (NDT), Acoustic Emission, Process Control, Surface Acoustic Wave (SAW) Devices, Frequency Control Devices, Research Instruments, Transducers, and Ultrasonic Microscopes. Also contained in the text are six essays covering technology transfer and commercialization.

These two volumes contain the Proceedings of the 9th IFAC symposium on Information Control in Manufacturing which took place in Nancy and Metz, France, between 24-26 June, 1998.
This INCOM'98 program had six main themes which focused on the role of information for automating manufacturing operations; the role of information for integrating and distributing automated manufacturing activities in the whole Enterprise and; the role of information for enhancing synergies between humans and machines.
This year's symposium drew attention from more than 35 countries, and the number of the papers presented was over 200. The scientific relevance of this symposium was sponsored by three International Scientific Societies: IFAC with 6 Technical Committees, IFIP and CIRP, and two National Scientific Institutions: CNRS and INRIA. The industrial relevance of this symposium produced sponsorship by more than 10 companies who actively participated in this event.

Thin-plated structures are used extensively in building construction, automobile, aircraft, shipbuilding and other industries because of a number of favourable factors such as high strength-weight ratio, development of new materials and processes and the availability of efficient analytical methods. This class of structure is made by joining thin plates together at their edges and they rely for their rigidity and strength upon the tremendous stiffness and load-carrying capacity of the flat plates from which they are made. Many of the problems encountered in these structures arise because of the effects of local buckling. The knowledge of various facets of this phenomenon has increased dramatically since the 1960s. Problem areas which were hitherto either too complex for rigorous analysis or whose subtleties were not fully realized have in these years been subjected to intensive study. Great advances have been made in the areas of inelastic buckling. The growth in use of lightweight strong materials, such as fibre-reinforced plastics has also been a contributory factor towards the need for advances in the knowledge of the far post-buckling range. The conference is a sequel to the international conference organised by the University of Strathclyde in December 1996 and this international gathering will provide the opportunity for discussion of recent developments and trends in design of thin-walled structures.

Mechatronics, a synergistic combination of mechanical, electronic and computing engineering technologies, is a truly multidisciplinary approach to engineering. New products based on mechatronic principles are demonstrating reduced mechanical complexity, increased performance and often previously impossible capabilities. This book contains the papers presented at the UK Mechatronics Forum's 6th International Conference, held in Skovde, Sweden, in September 1998. Many of these high-quality papers illustrate the tremendous influence of mechatronics on such areas as manufacturing machinery, automotive engineering, textiles manufacture, robotics, and real-time control and vision systems. There are also papers describing developments in sensors, actuators, control and data processing techniques, such as fuzzy logic and neural networks, all of which have practical application to mechatronic systems.

The 4th International Conference on Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials was held from 7-11 September 1998 in Garmisch-Partenkirchen, Germany.

In response to a call for papers, nearly 200 extended abstracts from 32 countries were submitted to the organizing committee. These papers were presented at the conference as invited lectures or short contributions and as oral or poster presentation. All the papers were presented in poster form in extended poster sessions a peculiarity of the LCF Conferences which allows an intense, thorough discussion of all contributions.

Each chapter provides a comprehensive overview of a materials class or a given subject. Many contributions could have been included in two or even three chapters and so, in order to give a better overview of the content, the reader will find a subject index, a material index and an author index in the back of the book.
"

The IFAC Workshop on Intelligent Components for Vehicles (ICV'98) was held in Seville (Spain), on March 23-24 1998. The event follows the Workshop on Intelligent Components for Autonomous and Semiautonomous Vehicles (ICASAV'95) held in Toulouse (France, October 1995).

The main objective of ICV'98 was to bring together specialists on components and instruments for automotive systems, mobile robots and vehicles in general to enhance the value of their experience in both hardware and software intelligent components.

Future vehicles will deal more and more with autonomous functions to improve safety and traffic management and to reduce consumption and pollution. Numerous on-board decision systems will replace the driver in critical running phases. The problems and solutions experienced, by adopting this new technology, will bring out many common points with other transportation systems and mobile robots.

Research and Developments on Mobile Robotics have produced many components for perception, control and planning that can be used in vehicles for collision detection and avoidance, position estimation, guidance and manoeuvering aids for drivers, advanced teleoperation, and other applications.

The topics of the Workshop are in an emerging field in which the research is quickly being converted into industrial products. Several applications in the automotive domain, marine vehicles, agricultural and others were included in the program.

In addition to the presentation of the papers, ICV also included a plenary talk and a round table about intelligent components for future vehicles with the participation of several industrial companies.

This book introduces process control to engineers and technicians unfamiliar with control techniques, providing an understanding of how to actually apply control in a real industrial environment. It avoids analytical treatment of the numerous statistical process control techniques to concentrate on the practical problems involved. A practical approach is taken, making it relevant in virtually all manufacturing and process industries.
There is currently no information readily available to practising engineers or students that discusses the real problems and such material is long overdue.
An indispensable guide for all those involved in process control
Includes equipment specification, troubleshooting, system specification and design
Provided with guidelines of HOW TO and HOW NOT TO install process control

Devising optimal strategy for maintaining industrial plant can be a difficult task of daunting complexity. This book aims to provide the plant engineer with a comprehensive and systematic approach, a framework of guidelines, for tackling this problem, i.e. for deciding maintenance objectives, formulating equipment life plans and plant maintenance schedules, designing the maintenance organisation and setting up appropriate systems of documentation and control.
The author, Anthony Kelly, an experienced international consultant and lecturer on this subject, calls his approach BUSINESS-CENTRED MAINTENANCE (BCM) because it springs from, and is driven by, the identification of business objectives, which are then translated into maintenance objectives and which underpin the maintenance strategy formulation. For the first time maintenance management is analysed from the perspective of the whole company and thus makes sense not only technologically but also in economic and business terms.
Complete guide to maintenance from a whole-company perspective
Best-selling and world-renowned author
Complementary to RCM (Moubray) & TPM (Wilmott)

This text provides a uniform and consistent approach to diversified problems encountered in the study of dynamical processes in condensed phase molecular systems. Given the broad interdisciplinary aspect of this subject, the book focuses on three themes: coverage of needed background material, in-depth introduction of methodologies, and analysis of several key applications. The uniform approach and common language used in all discussions help to develop general understanding and insight on condensed phases chemical dynamics. The applications discussed are among the most fundamental processes that underlie physical, chemical and biological phenomena in complex systems.
The first part of the book starts with a general review of basic mathematical and physical methods (Chapter 1) and a few introductory chapters on quantum dynamics (Chapter 2), interaction of radiation and matter (Chapter 3) and basic properties of solids (chapter 4) and liquids (Chapter 5). In the second part the text embarks on a broad coverage of the main methodological approaches. The central role of classical and quantum time correlation functions is emphasized in Chapter 6. The presentation of dynamical phenomena in complex systems as stochastic processes is discussed in Chapters 7 and 8. The basic theory of quantum relaxation phenomena is developed in Chapter 9, and carried on in Chapter 10 which introduces the density operator, its quantum evolution in Liouville space, and the concept of reduced equation of motions. The methodological part concludes with a discussion of linear response theory in Chapter 11, and of the spin-boson model in chapter 12. The third part of the book applies the methodologies introducedearlier to several fundamental processes that underlie much of the dynamical behaviour of condensed phase molecular systems. Vibrational relaxation and vibrational energy transfer (Chapter 13), Barrier crossing and diffusion controlled reactions (Chapter 14), solvation dynamics (Chapter 15), electron transfer in bulk solvents (Chapter 16) and at electrodes/electrolyte and metal/molecule/metal junctions (Chapter 17), and several processes pertaining to molecular spectroscopy in condensed phases (Chapter 18) are the main subjects discussed in this part.