This proceedings book presents selected papers from the 4th Conference on Signal and Information Processing, Networking and Computers (ICSINC) held in Qingdao, China on May 23-25, 2018. It focuses on the current research in a wide range of areas related to information theory, communication systems, computer science, signal processing, aerospace technologies, and other related technologies. With contributions from experts from both academia and industry, it is a valuable resource anyone interested in this field.

This book explains physics under the operating principles of semiconductor lasers in detail based on the experience of the author, dealing with the first manufacturing of phase-shifted DFB-LDs and recent research on transverse modes. The book also bridges a wide gap between journal papers and textbooks, requiring only an undergraduate-level knowledge of electromagnetism and quantum mechanics, and helps readers to understand journal papers where definitions of some technical terms vary, depending on the paper. Two definitions of the photon density in the rate equations and two definitions of the phase-shift in the phase-shifted DFB-LD are explained, and differences in the calculated results are indicated, depending on the definitions. Readers can understand the physics of semiconductor lasers and analytical tools for Fabry-Perot LDs, DFB-LDs, and VCSELs and will be stimulated to develop semiconductor lasers themselves.

This book provides a comprehensive introduction to integrated optical waveguides for information technology and data communications. Integrated coverage ranges from advanced materials, fabrication, and characterization techniques to guidelines for design and simulation. A concluding chapter offers perspectives on likely future trends and challenges. The dramatic scaling down of feature sizes has driven exponential improvements in semiconductor productivity and performance in the past several decades. However, with the potential of gigascale integration, size reduction is approaching a physical limitation due to the negative impact on resistance and inductance of metal interconnects with current copper-trace based technology. Integrated optics provides a potentially lower-cost, higher performance alternative to electronics in optical communication systems. Optical interconnects, in which light can be generated, guided, modulated, amplified, and detected, can provide greater bandwidth, lower power consumption, decreased interconnect delays, resistance to electromagnetic interference, and reduced crosstalk when integrated into standard electronic circuits. Integrated waveguide optics represents a truly multidisciplinary field of science and engineering, with continued growth requiring new developments in modeling, further advances in materials science, and innovations in integration platforms. In addition, the processing and fabrication of these new devices must be optimized in conjunction with the development of accurate and precise characterization and testing methods. Students and professionals in materials science and engineering will find "Advanced Materials for Integrated Optical Waveguides" to be an invaluable reference for meeting these research and development goals.

This book highlights the methods and applications for roadside video data analysis, with a particular focus on the use of deep learning to solve roadside video data segmentation and classification problems. It describes system architectures and methodologies that are specifically built upon learning concepts for roadside video data processing, and offers a detailed analysis of the segmentation, feature extraction and classification processes. Lastly, it demonstrates the applications of roadside video data analysis including scene labelling, roadside vegetation classification and vegetation biomass estimation in fire risk assessment.

Since the invention of the first laser 30 years ago, the frequency conversion of laser radiation in nonlinear optical crystals has become an important technique widely used in quantum electronics and laser physics for solving various scientific and engineering problems. The fundamental physics of three-wave light interactions in nonlinear optical crystals is now well understood. This has enabled the production of various harmonic generators, sum-and difference frequency generators, and optical parametric oscillators based on nonlinear optical crystals that are now commercially available. At the same time, scientists continue an active search for novel, highly efficient nonlinear optical materials. Therefore, in our opinion, there is a great need for a handbook of nonlinear optical crystals, intended for specialists and practitioners with an engineering background. This book contains a complete description of the properties and applications of all nonliner optical crystals of practical importance reported in the literature up to the beginning of 1990. In addition, it contains the most important equations for calculating the main parameters (such as phase-matching direction, effective nonlinearity, and conversion efficiency) of nonlinear frequency converters. Dolgoprudnyi, Yerevan, Troitzk v. G. Dmitriev USSR G. G. Gurzadyan October 1990 D. N. Nikogosyan Contents 1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Optics of Nonlinear Crystals. . . . . . . . . . . . . . . . . . . . . . . . 3 . . . . . ."

The aim of this book is to present foundational research on the nano-crystallization, high-temperature modification, micro-structure evolution and plastic deformation induced by laser shock processing. In this regard, the focus is on heat-resistant steel, aluminum alloy, Ti alloys and Ni-based alloys, offering valuable scientific insights into the industrial applications of laser shock processing (LSP) technology. The book addresses various topics, i.e., the formation mechanism and productivity improvement of nano-crystalline diamond by laser processing, the surface integrity and fatigue lives of heat-resistant steels, Ti alloys and Ni-based alloys after LSP with different processing parameters, tensile properties and fractural morphology after LSP at different temperatures, strain-rates and grain refinement mechanisms based on the micro-structure evolution. Moreover, the effect of heating temperature and exposure time on stress thermal relaxation and the influence of compressive stress on the stress intensity factor of hole-edge cracks by high strain rate laser shock processing are also analyzed. A new type of statistical data model to describe the fatigue cracking growth with limited data is proposed based on the consideration of the effects of fracture growth on the reliability and confidence level. This book is intended for researchers, engineers and postgraduates in the fields of nanotechnology and micro-engineering who are interested in the partial or overall strengthening of materials, especially those with a focus on surface integrity and fatigue life.

Physics of Strained Quantum Well Lasers provides an extremely detailed, accessible, and clear account of the fundamentals of the subject. This self-contained presentation progresses from strained quantum well bandstructure to device physics. It is specifically tailored to the background and needs of incoming graduate students in electrical engineering and physics, as well as industrial research and development engineers. Only a standard undergraduate knowledge of quantum mechanics, solid state physics, and electromagnetism is required. No prior familiarity with lasers is needed. The first chapter of Physics of Strained Quantum Well Lasers is a mini-course on advanced quantum mechanics, and explains the most important techniques. Perturbation methods, both time-independent and time-dependent, are developed in detail, making the rest of the material much easier to understand. In later chapters, particular attention is paid to some of the most challenging and important topics, such as the kA-p theory, the deformation potential theory, the multiband envelope function approximation, field quantization, and the emission and absorption of light in quantum wells. These core topics apply widely, both to quantum well lasers and to other electronic and optoelectronic devices. Physics of Strained Quantum Well Lasers will allow the reader to progress systematically through the text and emerge with enough knowledge to successfully understand and model strained quantum well lasers.

This 6th edition of "Tools of Radio Astronomy", the most used introductory text in radio astronomy, has been revised to reflect the current state of this important branch of astronomy. This includes the use of satellites, low radio frequencies, the millimeter/sub-mm universe, the Cosmic Microwave Background and the increased importance of mm/sub-mm dust emission. Several derivations and presentations of technical aspects of radio astronomy and receivers, such as receiver noise, the Hertz dipole and beam forming have been updated, expanded, re-worked or complemented by alternative derivations. These reflect advances in technology. The wider bandwidths of the Jansky-VLA and long wave arrays such as LOFAR and mm/sub-mm arrays such as ALMA required an expansion of the discussion of interferometers and aperture synthesis. Developments in data reduction algorithms have been included. As a result of the large amount of data collected in the past 20 years, the discussion of solar system radio astronomy, dust emission, and radio supernovae has been revisited. The chapters on spectral line emission have been updated to cover measurements of the neutral hydrogen radiation from the early universe as well as measurements with new facilities. Similarly the discussion of molecules in interstellar space has been expanded to include the molecular and dust emission from protostars and very cold regions. Several worked examples have been added in the areas of fundamental physics, such as pulsars. Both students and practicing astronomers will appreciate this new up-to-date edition of Tools of Radio Astronomy.

Microphone arrays have attracted a lot of interest over the last few decades since they have the potential to solve many important problems such as noise reduction/speech enhancement, source separation, dereverberation, spatial sound recording, and source localization/tracking, to name a few. However, the design and implementation of microphone arrays with beamforming algorithms is not a trivial task when it comes to processing broadband signals such as speech. Indeed, in most sensor arrangements, the beamformer output tends to have a frequency-dependent response. One exception, perhaps, is the family of differential microphone arrays (DMAs) who have the promise to form frequency-independent responses. Moreover, they have the potential to attain high directional gains with small and compact apertures. As a result, this type of microphone arrays has drawn much research and development attention recently. This book is intended to provide a systematic study of DMAs from a signal processing perspective. The primary objective is to develop a rigorous but yet simple theory

for the design, implementation, and performance analysis of DMAs. The theory includes some signal processing techniques for the design of commonly used first-order, second-order, third-order, and also the general "N"th-order DMAs. For each order, particular examples are given on how to form standard directional patterns such as the dipole, cardioid, supercardioid, hypercardioid, subcardioid, and quadrupole. The study demonstrates the performance of the different order DMAs in terms of beampattern, directivity factor, white noise gain, and gain for point sources. The inherent relationship between differential processing and adaptive beamforming is discussed, which provides a better understanding of DMAs and why they can achieve high directional gain. Finally, we show how to design DMAs that can be robust against white noise amplification.

Sizes of electronic and photonic devices are decreasing drastically in order to increase the degree of integration for large-capacity and ultrahigh speed signal transmission and information processing. This miniaturization must be rapidly progressed from now onward. For this progress, the sizes of materials for composing these devices will be also decreased to several nanometers. If such a nanometer-sized material is combined with the photons and/or some other fields, it can exhibit specific characters, which are considerably different from those ofbulky macroscopic systems. This combined system has been called as a mesoscopic system. The first purpose of this book is to study the physics of the mesoscopic system. For this study, it is essential to diagnose the characteristics of miniaturized devices and materials with the spatial resolution as high as several nanometers or even higher. Therefore, novel methods, e.g., scanning probe microscopy, should be developed for such the high-resolution diagnostics. The second purpose of this book is to explore the possibility of developing new methods for these diagnostics by utilizing local interaction between materials and electron, photon, atomic force, and so on. Conformation and structure of the materials of the mesoscopic system can be modified by enhancing the local interaction between the materials and electromagnetic field. This modification can suggest the possibility of novel nano-fabrication methods. The third purpose of this book is to explore the methods for such nano-fabrication."

There has continuously been a massive growth of Internet traffic for these years despite the "bubble burst" in year 2000. As the telecom market is gradually picking up, it would be a consensus in telecom and data-com industries that the CAPEX (Capital Expenditures) to rebuild the network infrastructure to cope with this traffic growth would be imminent, while the OPEX (Operational Expenditures) has to be within a tight constraint. Therefore, the newly built 2r DEGREES-century network has to fully evolve from voice-oriented legacy networks, not only by increasing the transmission capacity of WDM links but also by introducing switching technologies in optical domain to provide full-connectivity to support a wide variety of services. This book stems from the technical contributions presented at the Optical Networks and Technology Conference (OpNeTec), inaugurated this year 2004 in Pisa, Italy, and collects innovations of optical network technologies toward the 2V DEGREES century network. High-quality recent research results on optical networks and related technologies are presented, including IP over WDM integration, burst and packet switchings, control and managements, operation, metro- and access networks, and components and devices in the perspective of network application. An effort has been made throughout the conference, hopefully reflected at least partially in this book, to bring together researchers, scientists, and engineers working both academia and industries to discuss the relative impact of networks on technologies and vice versa, with a vision of the fut

The FEL field has grown enormously over the last years, which is reflected in the number of papers presented at the 1998 conference. A few specific areas in FEL are particularly active. Several groups are investigating self-amplified spontaneous emission (SASE) as a route to 0.1 nm FEL. Although the technical challenges are large, a growing portion of the community believes this is a feasible goal and have begun planning 4th generation light sources based on this technique. Already, demonstrations of SASE by many orders of magnitude in an unguided (by external means) optical mode have been achieved in the IR with extension into the UV soon to follow. Other groups are extending the applications of FELs by evolutionary changes in the capabilities of user facilities around the world. Many of these utilize other sources of radiation synchronously with tunable FEL beams. An emerging trend is th use of Thompson scattered photons from the electron beam. Because of the Doppler shift involved, the photons can be up-scattered into the X-ray (keV) or even gamma ray (MeV) regime forming a useful picosecond probe for analysis of materials or nuclear structure. Other groups continue to extend the range of FEL operation and a new record was set this year for short wavelength lasing (210nm) as well as production of the highest CW average power yet for a FEL (311 W).

This exhaustive volume will provide the reader with an appreciation of the state of FEL technology and convey also the sense of excitement and interest that exists in the field. Despite the fact that it has been 22 years since the first demonstration of lasing in a FEL oscillator, the field continues to provide interesting areas for study and application.

This thesis demonstrates and investigates novel dual-polarization interferometric fiber-optic gyroscope (IFOG) configurations, which utilize optical compensation between two orthogonal polarizations to suppress errors caused by polarization nonreciprocity. Further, it provides a scheme for dual-polarization two-port IFOGs and details their unique benefits. Dual-polarization IFOGs break through the restriction of the "minimal scheme," which conventional IFOGs are based on. These innovative new IFOGs have unique properties: They require no polarizer and have two ports available for signal detection. As such, they open new avenues for IFOGs to achieve lower costs and higher sensitivity.

Lasers and Nuclei describes the generation of high-energy-particle radiation with high-intensity lasers and its application to nuclear science. A basic introduction to laser--matter interaction at high fields is complemented by detailed presentations of state of the art laser particle acceleration and elementary laser nuclear experiments. The text also discusses future applications of lasers in nuclear science, for example in nuclear astrophysics, isotope generation, nuclear fuel physics and proton and neutron imaging.

Although the technological boom has resulted in many advancements in modern society, it has also come with a few downfalls; most notably, the failure of new machines and equipment. This has prompted engineers to find suitable diagnostics tools to stop impending malfunctions and make working environments more efficient. Recent Advances in Applied Thermal Imaging for Industrial Applications is a critical reference source that outlines innovative analysis tools to combat systems failure in thermal imaging. Highlighting pertinent topics such as fuzzy c- means technique, human health diagnosis system, multidimensional processing, and optical analysis, this is an ideal resource for all engineers, practitioners, industry leaders, and researchers who are interested in staying up-to-date with advances in thermal imaging which prevents industrial system malfunctions.

This book introduces context-aware computing, providing definitions, categories, characteristics, and context awareness itself and discussing its applications with a particular focus on smart learning environments. It also examines the elements of a context-aware system, including acquisition, modelling, reasoning, and distribution of context. It also reviews applications of context-aware computing - both past and present - to offer readers the knowledge needed to critically analyse how context awareness can be put to use. It is particularly to those new to the subject area who are interested in learning how to develop context-aware computing-oriented applications, as well as postgraduates and researchers in computer engineering, communications engineering related areas of information technology (IT). Further it provides practical know-how for professionals working in IT support and technology, consultants and business decision-makers and those working in the medical, human, and social sciences.

This book discusses the trade-offs involved in designing direct RF digitization receivers for the radio frequency and digital signal processing domains. A system-level framework is developed, quantifying the relevant impairments of the signal processing chain, through a comprehensive system-level analysis. Special focus is given to noise analysis (thermal noise, quantization noise, saturation noise, signal-dependent noise), broadband non-linear distortion analysis, including the impact of the sampling strategy (low-pass, band-pass), analysis of time-interleaved ADC channel mismatches, sampling clock purity and digital channel selection. The system-level framework described is applied to the design of a cable multi-channel RF direct digitization receiver. An optimum RF signal conditioning, and some algorithms (automatic gain control loop, RF front-end amplitude equalization control loop) are used to relax the requirements of a 2.7GHz 11-bit ADC.
A two-chip implementation is presented, using BiCMOS and 65nm CMOS processes, together with the block and system-level measurement results. Readers will benefit from the techniques presented, which are highly competitive, both in terms of cost and RF performance, while drastically reducing power consumption.
"

The field of optics has been accelerating at an unprecedented rate, due both to the tremendous growth of the field of fiber-optic communications, and to the improvement of optical materials and devices. Throughput capabilities of fiber systems are accelerating faster than Moore's law, the famous growth rate of silicon chip capability, which has propelled that industry relentlessly over decades. In addition, new optical storage techniques push the limits of information density, with an ever decreasing cost per bit of storage. Economic investment in photonics is at an all-time high. At the same time, other fields of optics, adaptive optics for instance, are bringing new capabilities to more classical applications such as astronomical imaging. New lasers continue to be developed, with applications in display, sensing, and biomedicine following at ever-shorter intervals after the initial discoveries. Given this background, the NATO Mediterranean Dialog Advanced Research Workshop on Unconventional Optical Elements for Information Storage, Processing and Communications, held in Israel on October 19-21, 1998, came at an opportune moment in the history of optics. Its aim was to overview the current state-of-the-art and encourage cooperation in the Mediterranean region, with a view to highlighting and enhancing the existing potential for further development and innovation. The workshop included participants from Belgium, France, Germany, Greece, Israel, Italy, Jordan, Morocco, Portugal, Romania, Russia, Switzerland, Turkey, United Kingdom and USA.

Volume I contains a brief review of adsorption history and its development for practical purposes up until now. It also presents some important information on adsorbents and catalysts as well as on the methods of their characterization. The part of this volume dealing with practical industrial applications includes chapters presenting advanced technical tools for high capacity adsorption separation of liquid and gas mixtures, development of new adsorbents for removal of hazardous contaminants from combustion flue gases and wastewaters, degasification of coal seams and fabrication of inorganic membranes and their applications. A comprehensive review is also included on contemporary utility of self-assembled monolayers, adsorption proteins and their role in modern industry, adsorption methods in technology of optical fibre glasses, sol-gel technology, solid desiccant dehumidification systems, etc. The articles give both the scientific backgrounds of the phenomena discussed and emphasize their practical aspects.

The chapters give not only brief current knowledge about the studied problems, but are also a source of topical literature on the subject. A comprehensive bibliography on adsorption principles, design data and adsorbent materials for industrial applications for the period 1967-1997 concludes the book.

This volume contains Part II of the proceedings of the conference on Free Electron Lasers, held in Beijing, August 1997. Part I appears in a special issue of "Nuclear Instruments and Methods A." The last 20 years has seen different stages of FEL development. In these proceedings the reader will find descriptions of many new facilities, new experimental results, new applications, new theoretical developments and new simulation results. Attention is also focussed on the recent progress in experimental observations SASE. The contributions are from 150 scientists from 13 countries, ensuring broad, up-to-date research results from a dynamic field.

"Long Wave Polar Modes in Semiconductor Heterostructures" is concerned with the study of polar optical modes in semiconductor heterostructures from a phenomenological approach and aims to simplify the model of lattice dynamics calculations. The book provides useful tools for performing calculations relevant to anyone who might be interested in practical applications.

The main focus of "Long Wave Polar Modes in Semiconductor Heterostructures" is planar heterostructures (quantum wells or barriers, superlattices, double barrier structures etc) but there is also discussion on the growing field of quantum wires and dots. Also to allow anyone reading the book to apply the techniques discussed for planar heterostructures, the scope has been widened to include cylindrical and spherical geometries.

The book is intended as an introductory text which guides the reader through basic questions and expands to cover state-of-the-art professional topics. The book is relevant to experimentalists wanting an instructive presentation of a simple phenomenological model and theoretical tools to work with and also to young theoreticians by providing discussion of basic issues and the basis of advanced theoretical formulations. The book also provides a brief respite on the physics of piezoelectric waves as a coupling to polar optical modes.