Art-K Canvas Panels are part of a special selection of products for art-K, an art club for adults and children between the ages of 6-16 years. Art-K seeks to help everyone explore colour, brush strokes, and the completion of a painting!

This is a canvas board with a depth of 3mm, measuring 10 x 12in.

Art-K Canvas Panels are part of a special selection of products for art-K, an art club for adults and children between the ages of 6-16 years.

Art-K seeks to help everyone explore colour, brush strokes, and the completion of a painting!

This is a canvas board with a depth of 3mm, measuring 12 x 16in.

10 Sheets of acrylic primed medium grain cotton canvas, with one free Belle Arti Cotton Art Board.

10 Sheets of acrylic primed medium grain cotton canvas, with one free Belle Arti Cotton Art Board.

10 Sheets of acrylic primed medium grain cotton canvas, with one free Belle Arti Cotton Art Board.

10 Sheets of acrylic primed medium grain cotton canvas, with one free Belle Arti Cotton Art Board.

10 Sheets of acrylic primed medium grain cotton canvas, with one free Belle Arti Cotton Art Board.

10 Sheets of acrylic primed medium grain cotton canvas, with one free Belle Arti Cotton Art Board.

Precision cut flatwire staple made from high performance steel. Flatwire has a larger holding area against the material, making it ideal for canvas, fabric, card, thin plastic, insulation etc.

These will work in the following staplers:Rapid; R11E, R14, R34, R44E, R64E, R114, ESN 114, E-Tac, MS 640 Esco; Esco 11 professional Rocafix; MS50V, MS 500, ES 130 Arrow; T50, T55, T50PBN, HT50 Black and Decker Powershot Bosch; HTM57 KWB; HTO57 LUX; HHT Maxi 196251, 195055 Maestri, Rocama 16 T50, T50 Electronic Mekano; Hyper 16, Super 17 Novus; J-19EHG, J-030G, J-031G Rapesco; Z2-P, Z2, A11Hammer Rawlplug; R11, R14, R34 Stanley; Sharpshooter, HHT 3-69-737 Available in sizes:6mm deep, 8mm deep, 10mm deep

Precision cut flatwire staple made from high performance steel. Flatwire has a larger holding area against the material, making it ideal for canvas, fabric, card, thin plastic, insulation etc.

These will work in the following staplers:Rapid; R11E, R14, R34, R44E, R64E, R114, ESN 114, E-Tac, MS 640Esco; Esco 11 professionalRocafix; MS50V, MS 500, ES 130Arrow; T50, T55, T50PBN, HT50Black and Decker PowershotBosch; HTM57KWB; HTO57LUX; HHT Maxi 196251, 195055Maestri, Rocama 16 T50, T50 ElectronicMekano; Hyper 16, Super 17Novus; J-19EHG, J-030G, J-031GRapesco; Z2-P, Z2, A11HammerRawlplug; R11, R14, R34Stanley; Sharpshooter, HHT 3-69-737Available in sizes:6mm deep, 8mm deep, 10mm deep

Jackson's Medium Cotton Duck Canvas is our affordable and high-quality woven cotton fabric. Many artists use this canvas for its affordability and ability to tightly stretch wooden frames when creating a canvas. The canvas goes through rigorous quality checks to ensure it is of a high standard for artists' use.

Jackson's Wooden Panels are made of smooth, sanded light plywood, reinforced on the reverse to prevent warping. Sturdy yet lightweight, they are perfect for plein air painting projects and work in the studio.

These panels are made from wood and they are not supplied sealed. This means that liquids are absorbed into the surface and if they get too ‘wet’, there could be a swelling of the veneer. If the panel is to be used for painting then you should seal the surface with a quality glue size or an acrylic based primer. When you're applying acrylic gesso primer, avoid thinning it with water.

After sizing we recommend priming with acrylic gesso and sanding the surface to produce a smooth yet slightly absorbent surface.

Jackson's Wooden Panels can also be used for encaustic painting, or as a work support / drawing board.

Available in 20mm (approx. 3/4") and 50mm (approx. 2") deep profiles, in a wide range of sizes.

Please note: as this is a natural product, small cracks can develop on the surface. These can be removed by sanding the surface before applying the sealer or primer.

Jackson's Wooden Panels are made of smooth, sanded light plywood, reinforced on the reverse to prevent warping. Sturdy yet lightweight, they are perfect for plein air painting projects and work in the studio.

These panels are made from wood and they are not supplied sealed. This means that liquids are absorbed into the surface and if they get too ‘wet’, there could be a swelling of the veneer. If the panel is to be used for painting then you should seal the surface with a quality glue size or an acrylic based primer. When you're applying acrylic gesso primer, avoid thinning it with water.

After sizing we recommend priming with acrylic gesso and sanding the surface to produce a smooth yet slightly absorbent surface.

Jackson's Wooden Panels can also be used for encaustic painting, or as a work support / drawing board.

Available in 20mm (approx. 3/4") and 50mm (approx. 2") deep profiles, in a wide range of sizes.

Please note: as this is a natural product, small cracks can develop on the surface. These can be removed by sanding the surface before applying the sealer or primer.

Jackson's Wooden Panels are made of smooth, sanded light plywood, reinforced on the reverse to prevent warping. Sturdy yet lightweight, they are perfect for plein air painting projects and work in the studio.

These panels are made from wood and they are not supplied sealed. This means that liquids are absorbed into the surface and if they get too ‘wet’, there could be a swelling of the veneer. If the panel is to be used for painting then you should seal the surface with a quality glue size or an acrylic based primer. When you're applying acrylic gesso primer, avoid thinning it with water.

After sizing we recommend priming with acrylic gesso and sanding the surface to produce a smooth yet slightly absorbent surface.

Jackson's Wooden Panels can also be used for encaustic painting, or as a work support / drawing board.

Available in 20mm (approx. 3/4") and 50mm (approx. 2") deep profiles, in a wide range of sizes.

Please note: as this is a natural product, small cracks can develop on the surface. These can be removed by sanding the surface before applying the sealer or primer.

Jackson's Wooden Panels are made of smooth, sanded light plywood, reinforced on the reverse to prevent warping. Sturdy yet lightweight, they are perfect for plein air painting projects and work in the studio.

These panels are made from wood and they are not supplied sealed. This means that liquids are absorbed into the surface and if they get too ‘wet’, there could be a swelling of the veneer. If the panel is to be used for painting then you should seal the surface with a quality glue size or an acrylic based primer. When you're applying acrylic gesso primer, avoid thinning it with water.

After sizing we recommend priming with acrylic gesso and sanding the surface to produce a smooth yet slightly absorbent surface.

Jackson's Wooden Panels can also be used for encaustic painting, or as a work support / drawing board.

Available in 20mm (approx. 3/4") and 50mm (approx. 2") deep profiles, in a wide range of sizes.

Please note: as this is a natural product, small cracks can develop on the surface. These can be removed by sanding the surface before applying the sealer or primer.

Jackson's Wooden Panels are made of smooth, sanded light plywood, reinforced on the reverse to prevent warping. Sturdy yet lightweight, they are perfect for plein air painting projects and work in the studio.

These panels are made from wood and they are not supplied sealed. This means that liquids are absorbed into the surface and if they get too ‘wet’, there could be a swelling of the veneer. If the panel is to be used for painting then you should seal the surface with a quality glue size or an acrylic based primer. When you're applying acrylic gesso primer, avoid thinning it with water.

After sizing we recommend priming with acrylic gesso and sanding the surface to produce a smooth yet slightly absorbent surface.

Jackson's Wooden Panels can also be used for encaustic painting, or as a work support / drawing board.

Available in 20mm (approx. 3/4") and 50mm (approx. 2") deep profiles, in a wide range of sizes.

Please note: as this is a natural product, small cracks can develop on the surface. These can be removed by sanding the surface before applying the sealer or primer.

Jackson's Wooden Panels are made of smooth, sanded light plywood, reinforced on the reverse to prevent warping. Sturdy yet lightweight, they are perfect for plein air painting projects and work in the studio.

These panels are made from wood and they are not supplied sealed. This means that liquids are absorbed into the surface and if they get too ‘wet’, there could be a swelling of the veneer. If the panel is to be used for painting then you should seal the surface with a quality glue size or an acrylic based primer. When you're applying acrylic gesso primer, avoid thinning it with water.

After sizing we recommend priming with acrylic gesso and sanding the surface to produce a smooth yet slightly absorbent surface.

Jackson's Wooden Panels can also be used for encaustic painting, or as a work support / drawing board.

Available in 20mm (approx. 3/4") and 50mm (approx. 2") deep profiles, in a wide range of sizes.

Please note: as this is a natural product, small cracks can develop on the surface. These can be removed by sanding the surface before applying the sealer or primer.

Jackson's Wooden Panels are made of smooth, sanded light plywood, reinforced on the reverse to prevent warping. Sturdy yet lightweight, they are perfect for plein air painting projects and work in the studio.

These panels are made from wood and they are not supplied sealed. This means that liquids are absorbed into the surface and if they get too ‘wet’, there could be a swelling of the veneer. If the panel is to be used for painting then you should seal the surface with a quality glue size or an acrylic based primer. When you're applying acrylic gesso primer, avoid thinning it with water.

After sizing we recommend priming with acrylic gesso and sanding the surface to produce a smooth yet slightly absorbent surface.

Jackson's Wooden Panels can also be used for encaustic painting, or as a work support / drawing board.

Available in 20mm (approx. 3/4") and 50mm (approx. 2") deep profiles, in a wide range of sizes.

Please note: as this is a natural product, small cracks can develop on the surface. These can be removed by sanding the surface before applying the sealer or primer.

Jackson's Wooden Panels are made of smooth, sanded light plywood, reinforced on the reverse to prevent warping. Sturdy yet lightweight, they are perfect for plein air painting projects and work in the studio.

These panels are made from wood and they are not supplied sealed. This means that liquids are absorbed into the surface and if they get too ‘wet’, there could be a swelling of the veneer. If the panel is to be used for painting then you should seal the surface with a quality glue size or an acrylic based primer. When you're applying acrylic gesso primer, avoid thinning it with water.

After sizing we recommend priming with acrylic gesso and sanding the surface to produce a smooth yet slightly absorbent surface.

Jackson's Wooden Panels can also be used for encaustic painting, or as a work support / drawing board.

Available in 20mm (approx. 3/4") and 50mm (approx. 2") deep profiles, in a wide range of sizes.

Please note: as this is a natural product, small cracks can develop on the surface. These can be removed by sanding the surface before applying the sealer or primer.

Jackson's Wooden Panels are made of smooth, sanded light plywood, reinforced on the reverse to prevent warping. Sturdy yet lightweight, they are perfect for plein air painting projects and work in the studio.

These panels are made from wood and they are not supplied sealed. This means that liquids are absorbed into the surface and if they get too ‘wet’, there could be a swelling of the veneer. If the panel is to be used for painting then you should seal the surface with a quality glue size or an acrylic based primer. When you're applying acrylic gesso primer, avoid thinning it with water.

After sizing we recommend priming with acrylic gesso and sanding the surface to produce a smooth yet slightly absorbent surface.

Jackson's Wooden Panels can also be used for encaustic painting, or as a work support / drawing board.

Available in 20mm (approx. 3/4") and 50mm (approx. 2") deep profiles, in a wide range of sizes.

Please note: as this is a natural product, small cracks can develop on the surface. These can be removed by sanding the surface before applying the sealer or primer.

Jackson's Wooden Panels are made of smooth, sanded light plywood, reinforced on the reverse to prevent warping. Sturdy yet lightweight, they are perfect for plein air painting projects and work in the studio.

These panels are made from wood and they are not supplied sealed. This means that liquids are absorbed into the surface and if they get too ‘wet’, there could be a swelling of the veneer. If the panel is to be used for painting then you should seal the surface with a quality glue size or an acrylic based primer. When you're applying acrylic gesso primer, avoid thinning it with water.

After sizing we recommend priming with acrylic gesso and sanding the surface to produce a smooth yet slightly absorbent surface.

Jackson's Wooden Panels can also be used for encaustic painting, or as a work support / drawing board.

Available in 20mm (approx. 3/4") and 50mm (approx. 2") deep profiles, in a wide range of sizes.

Please note: as this is a natural product, small cracks can develop on the surface. These can be removed by sanding the surface before applying the sealer or primer.

Jackson's Wooden Panels are made of smooth, sanded light plywood, reinforced on the reverse to prevent warping. Sturdy yet lightweight, they are perfect for plein air painting projects and work in the studio.

These panels are made from wood and they are not supplied sealed. This means that liquids are absorbed into the surface and if they get too ‘wet’, there could be a swelling of the veneer. If the panel is to be used for painting then you should seal the surface with a quality glue size or an acrylic based primer. When you're applying acrylic gesso primer, avoid thinning it with water.

After sizing we recommend priming with acrylic gesso and sanding the surface to produce a smooth yet slightly absorbent surface.

Jackson's Wooden Panels can also be used for encaustic painting, or as a work support / drawing board.

Available in 20mm (approx. 3/4") and 50mm (approx. 2") deep profiles, in a wide range of sizes.

Please note: as this is a natural product, small cracks can develop on the surface. These can be removed by sanding the surface before applying the sealer or primer.

Jackson's Wooden Panels are made of smooth, sanded light plywood, reinforced on the reverse to prevent warping. Sturdy yet lightweight, they are perfect for plein air painting projects and work in the studio.

These panels are made from wood and they are not supplied sealed. This means that liquids are absorbed into the surface and if they get too ‘wet’, there could be a swelling of the veneer. If the panel is to be used for painting then you should seal the surface with a quality glue size or an acrylic based primer. When you're applying acrylic gesso primer, avoid thinning it with water.

After sizing we recommend priming with acrylic gesso and sanding the surface to produce a smooth yet slightly absorbent surface.

Jackson's Wooden Panels can also be used for encaustic painting, or as a work support / drawing board.

Available in 20mm (approx. 3/4") and 50mm (approx. 2") deep profiles, in a wide range of sizes.

Please note: as this is a natural product, small cracks can develop on the surface. These can be removed by sanding the surface before applying the sealer or primer.

Jackson's Wooden Panels are made of smooth, sanded light plywood, reinforced on the reverse to prevent warping. Sturdy yet lightweight, they are perfect for plein air painting projects and work in the studio.

These panels are made from wood and they are not supplied sealed. This means that liquids are absorbed into the surface and if they get too ‘wet’, there could be a swelling of the veneer. If the panel is to be used for painting then you should seal the surface with a quality glue size or an acrylic based primer. When you're applying acrylic gesso primer, avoid thinning it with water.

After sizing we recommend priming with acrylic gesso and sanding the surface to produce a smooth yet slightly absorbent surface.

Jackson's Wooden Panels can also be used for encaustic painting, or as a work support / drawing board.

Available in 20mm (approx. 3/4") and 50mm (approx. 2") deep profiles, in a wide range of sizes.

Please note: as this is a natural product, small cracks can develop on the surface. These can be removed by sanding the surface before applying the sealer or primer.

Jackson's Wooden Panels are made of smooth, sanded light plywood, reinforced on the reverse to prevent warping. Sturdy yet lightweight, they are perfect for plein air painting projects and work in the studio.

These panels are made from wood and they are not supplied sealed. This means that liquids are absorbed into the surface and if they get too ‘wet’, there could be a swelling of the veneer. If the panel is to be used for painting then you should seal the surface with a quality glue size or an acrylic based primer. When you're applying acrylic gesso primer, avoid thinning it with water.

After sizing we recommend priming with acrylic gesso and sanding the surface to produce a smooth yet slightly absorbent surface.

Jackson's Wooden Panels can also be used for encaustic painting, or as a work support / drawing board.

Available in 20mm (approx. 3/4") and 50mm (approx. 2") deep profiles, in a wide range of sizes.

Please note: as this is a natural product, small cracks can develop on the surface. These can be removed by sanding the surface before applying the sealer or primer.