Electromagnetic compatibility (EMC) deals with the unintentional propagation and reception of electromagnetic energy which may cause disturbances or even physical damage in electronic or electromechanical systems. With the increase in number and density of electronic devices and systems in modern vehicles, EMC has become a substantial concern and a key cause of malfunction of automotive electronics. This book explores electromagnetic compatibility in the context of automotive electronics, with a close relation to functional safety as required by ISO 26262. Topics covered include an introduction to automotive electronics; electrical drives and charging infrastructure; fundamentals of functional safety; fundamentals of EMC, signal and power integrity; the legal framework; EMC design at the ECU Level; EMC design at the system level and in special subsystems; modelling and simulation; and test and measurement for EMC.

From the Foreword by Captain Daniel Maurino, ICAO: '...Air Traffic Control...will remain a technology-intensive system. People (controllers) must harmoniously interact with technology to contribute to achieve the aviation system's goals of safe and efficient transportation of passengers and cargo...This book...considers human error and human factors from a contemporary and operational perspective and discusses the parts as well as the whole...I hope you enjoy reading it as much as I did.' The motivation for writing this book comes from the author's long standing belief that the needs of Air Traffic Service personnel are inadequately represented in the aviation literature. There are few references to air traffic control in many of the books written for pilots and about pilots and this is also observed at the main international conferences. In line with the ICAO syllabus for human factors training for air traffic controllers, the book covers the main issues in air traffic control, with regard to human performance: physiology including stress, fatigue and shift work problems; psychology with emphasis on human error and its management, social psychology including issues of communication and working in teams, the environment including ergonomic principles and working with new technologies and hardware and software issues including the development of documentation and procedures and a study of the changes brought about by advanced technologies. Throughout the text there are actual examples taken from the air traffic control environment to illustrate the issues discussed. A full bibliography is included for those who want to read beyond these issues. It has been written for all in air traffic services, from ab initio to the boardroom; it is important that the men and women in senior management positions have some knowledge and awareness of the fundamental problems that limit and enhance human performance.

The control of the longitudinal, lateral and vertical dynamics of two and four-wheeled vehicles, both of conventional type as well as fully-electric, is important not only for general safety of vehicular traffic in general, but also for future automated driving. Sliding Mode Control of Vehicular Dynamics provides an overview of this important topic. Topics covered include an introduction to sliding mode control; longitudinal vehicle dynamics control via sliding modes generation; sliding mode control of traction and braking in two-wheeled vehicles; lateral vehicle dynamics control via sliding modes generation; stability control of heavy vehicles; sliding mode approach in semi-active suspension control; and observer-based parameter identification for vehicle dynamics assessment. Each chapter introduces the problem formulation and a general overview of its physical aspects, provides a survey of the relevant literature on the topic, and reports on the authors' contributions to solving the control problem. The book is essential reading for researchers involved in vehicle control, from both industry and academia, as well as advanced students.

The major changes taking place in technology have some of the greatest effect in the world of aviation. Yet, in an industry which started with the concept of 'open skies', each sector has traditionally developed on its own and adjusted to developments in other areas as and when required. The need for integration is particularly important as the skies become increasingly crowded. More intense commercialization dramatically increases the interlocking between technological developments and the size of the financial investments required. For maximum efficiency the aviation system thus has to develop as an integrated whole with a greater awareness of events in other sectors. This book is intended to meet this requirement by addressing the breadth and depth of the aviation system and looking at some areas where significant advances are happening. While following the processes of development, the reader will see where the results might lead in the new century. Its three parts concentrate on areas of great significance - in integration as well as in technological progress - especially for their impact on human and social aspects. The editor and the invited contributors are amongst the foremost experts, researchers and industry leaders in their fields in the global aviation community, many with hands-on experience of massive change. The intended readership includes those who are moving into management functions in air traffic management, airplane manufacturing and airline operations; in training centres, colleges and institutions.

This textbook provides a coherent and structured overview of fluid mechanics, a discipline concerned with many natural phenomena and at the very heart of the most diversified industrial applications and human activities. The balance between phenomenological analysis, physical conceptualization and mathematical formulation serve both as a unifying educational marker and as a methodological guide to the three parts of the work. The thermo-mechanical motion equations of a homogeneous single-phase fluid are established, from which flow models (perfect fluid, viscous) and motion classes (isovolume, barotropic, irrotational, etc.) are derived. Incompressible, potential flows and compressible flows, both in an isentropic evolution and shock, of an ideal inviscid fluid are addressed in the second part. The viscous fluid is the subject of the last one, with the creeping motion regime and the laminar, dynamic and thermal boundary layer. Historical perspectives are included whenever they enrich the understanding of modern concepts. Many examples, chosen for their pedagogical relevance, are dealt with in exercises. The book is intended as a teaching tool for undergraduate students, wishing to acquire a first command of fluid mechanics, as well as graduates in advanced courses and engineers in other fields, concerned with completing what is sometimes a scattered body of knowledge.

This volume contains the results of the Manchester Benchmarking exercise for railway vehicle dynamics simulation packages. Five of the main computer packages currently used for this purpose were examined in the exercise and the results are presented in the form of tables and graphs.

FROM THE INTRODUCTION
Vehicle crashworthiness has been improving in recent years with attention mainly directed towards reducing the impact of the crash on the passengers. Effort has been spent in experimental research and in establishing safe theoretical design criteria on the mechanics of crumpling, providing to the engineers the ability to design vehicle structures so that the maximum amount of energy will dissipate while the material surrounding the passenger compartment is deformed, thus protecting the people inside.
During the last decade the attention given to crashworthiness and crash energy management has been centered on composite structures. The main advantages of fibre reinforced composite materials over more conventional isotropic materials, are the very high specific strengths and specific stiffness which can be achieved. Moreover, with composites, the designer can vary the type of fibre, matrix and fibre orientation to produce composites with proved material properties. Besides the perspective of reduced weight, design flexibility and low fabrication costs, composite materials offer a considerable potential for lightweight energy absorbing structures; these facts attract the attention of the automotive and aircraft industry owing to the increased use of composite materials in various applications, such as frame rails used in the apron construction of a car body and the subfloor of an aircraft, replacing the conventional materials used.
Our monograph is intended to provide an introduction to this relatively new topic of structural crashworthiness for professional engineers. It will introduce them to terms and concepts of it and acquaint them with some sources of literature about it. We believe that our survey constitutes a reasonably well-balanced synopsis of the topic.

This classic book in the Kemp and Young series has been fully revised and updated by David J Eyres, author of the well-known Butterworth-Heinemann title "Ship Construction," and will prove indispensable to the student reader. The contents cover, in numerous fully illustrated items, shipyard practices, principles of construction methods, the design and construction of the various component parts of the ship, and the overall arrangement of different types of merchant and passenger vessels.

Questions concerning safety in aviation attract a great deal of attention, due to the growth in this industry and the number of fatal accidents in recent years. The aerospace industry has always been deeply concerned with the permanent prevention of accidents and the conscientious safeguarding of all imaginable critical factors surrounding the organization of processes in aeronautical technology. However, the developments in aircraft technology and control systems require further improvements to meet future safety demands.
This book embodies the proceedings of the 1997 International Aviation Safety Conference, and contains 60 talks by internationally recognized experts on various aspects of aviation safety. Subjects covered include:
Human interfaces and man-machine interactions; Flight safety engineering and operational control systems; Aircraft development and integrated safety designs; Safety strategies relating to risk insurance and economics; Corporate aspects and safety management factors --- including airlines services and airport security environment.

The book includes the research papers presented in the final conference of the EU funded SARISTU (Smart Intelligent Aircraft Structures) project, held at Moscow, Russia between 19-21 of May 2015. The SARISTU project, which was launched in September 2011, developed and tested a variety of individual applications as well as their combinations. With a strong focus on actual physical integration and subsequent material and structural testing, SARISTU has been responsible for important progress on the route to industrialization of structure integrated functionalities such as Conformal Morphing, Structural Health Monitoring and Nanocomposites. The gap- and edge-free deformation of aerodynamic surfaces known as conformal morphing has gained previously unrealized capabilities such as inherent de-icing, erosion protection and lightning strike protection, while at the same time the technological risk has been greatly reduced. Individual structural health monitoring techniques can now be applied at the part-manufacturing level rather than via extending an aircraft's time in the final assembly line. And nanocomposites no longer lose their improved properties when trying to upscale from neat resin testing to full laminate testing at element level. As such, this book familiarizes the reader with the most significant develo pments, achievements and key technological steps which have been made possible through the four-year long cooperation of 64 leading entities from 16 different countries with the financial support of the European Commission.

J.L. Burch*V. Angelopoulos Originally published in the journal Space Science Reviews, Volume 141, Nos 1-4, 1-3. DOI: 10.1007/s11214-008-9474-5 (c) Springer Science+Business Media B.V. 2008 The Earth, like all the other planets, is continuously bombarded by the solar wind, which is variable on many time scales owing to its connection to the activity of the Sun. But the Earth is unique among planets because its atmosphere, magnetic eld, and rotation rates are each signi cant, though not dominant, players in the formation of its magnetosphere and its reaction to solar-wind inputs. An intriguing fact is that no matter what the time scale of solar-wind variations, the Earth's response has a de nite pattern lasting a few hours. Known as a magnetospheric substorm, the response involves a build-up, a crash, and a recovery. The build-up (known as the growth phase) occurs because of an interlinking of the geom- netic eld and the solar-wind magnetic eld known as magnetic reconnection, which leads to storage of increasing amounts of magnetic energy and stress in the tail of the mag- tosphere and lasts about a half hour. The crash (known as the expansion phase) occurs when the increased magnetic energy and stresses are impulsively relieved, the current system that supports the stretched out magnetic tail is diverted into the ionosphere, and bright, dynamic displays of the aurora appear in the upper atmosphere. The expansion and subsequent rec- ery phases result from a second magnetic reconnection event that decouples the solar-wind and geomagnetic elds.

The atlas contains 12 sheets- 2600.1 Trevose Head to St David's Head 1:450, 000 WGS 84 2600.2 Padstow to Hartland Point 1:120, 000 WGS 84 Plans Approaches to Padstow, Bude Haven 2600.3 Hartland to Ilfracombe 1:140, 000 WGS 84 Plans Barnstaple to Bideford, Lundy, Continuation to Barnstaple 2600.4 Approaches to the Bristol Channel 1:130, 000 WGS 84 2600.5 Ilfracombe to Nash Point 1:130, 000 WGS 84 Plans The Mumbles, Swansea Marina, Porthcawl, Ilfracombe 2600.6 Nash Point to Flat Holm 1:80, 000 WGS 84 Plans Watchet 2600.7 Flat Holm to Avonmouth 1:70, 000 WGS 84 Plans Cardiff Bay 2600.8 River Severn to Sharpness 1:50, 000 WGS 84 Plans Sharpness 2600.9 River Avon 1: 20, 000 WGS 84 Plans River Avon (continuation) 2600.10 Tenby to Skomer Island 1:135 000 WGS 84 Plans Jack Sound, Tenby & Caldey Island 2600.11 Milford Haven - St Ann's Head to Neyland Point 1:30, 000 WGS 84 Plans Milford Marina 2600.12 River Cleddau - above Neyland Point 1:25, 000 WGS 84 Plans Neyland Yacht Haven, Continuation to Haverfordwest Imray Digital Charts: Free mobile download A voucher code to download the relevant Imray digital charts into our Imray Navigator app is included with this atlas.

With a focus on cargo transportation, this book addresses the development of approaches intended to secure an infrastructure of smart services to support the adaptive implementation of online multi-modal freight transport management processes. It discusses the development of multi-criteria decision-making components and their integration into the multi-layered computer-based information management of intelligent systems. Through detailed descriptions of various components of intelligent transport management systems, the book demonstrates how to develop the services needed in the right place and at the right time, and how to properly adapt to user needs, making necessary interventions to ensure the safety of the transportation process. Further, it describes the main ways to increase the autonomy and efficiency of user-vehicle interaction and shows how Information and Communications Technology (ICT) structural support for current and past situations in AI-based systems can help to anticipate future developments in freight transportation.

This book provides a single comprehensive resource that reviews many of the current aircraft flight control programmes from the perspective of experienced practitioners directly involved in the projects. Each chapter discusses a specific aircraft flight programme covering the control system design considerations, control law architecture, simulation and analysis, flight test optimization and handling qualities evaluations. The programmes described have widely exploited modern interdisciplinary tools and techniques and the discussions include extensive flight test results. Many important `lessons learned' are included from the experience gained when design methods and requirements were tested and optimized in actual flight demonstration.

This book highlights the capabilities and limitations of radar and air navigation. It discusses issues related to the physical principles of an electromagnetic field, the structure of radar information, and ways to transmit it. Attention is paid to the classification of radio waves used for transmitting radar information, as well as to the physical description of their propagation media. The third part of the book addresses issues related to the current state of navigation systems used in civil aviation and the prospects for their development in the future, as well as the history of satellite radio navigation systems. The book may be useful for schoolchildren, interested in the problems of radar and air navigation.

Franz Georg Hey summarises the development and testing of a micro-Newton thrust balance, as well as the downscaling of a High Efficiency Multistage Plasma Thruster to micro-Newton thrust levels. The balance is tailored to fully characterise thruster candidates for the space based gravitational wave detector LISA. Thus, thrust noise measurements in sub-micro-Newton regime can be performed in the overall LISA bandwidth. The downscaled thruster can be operated down to serval tens of micro-Newton with a comparably high specific impulse. About the Author Franz Georg Hey works as mechanical, thermal, propulsion architect and technical lead of the micro-Newton propulsion laboratory of Europe's leading air and spacecraft manufacturer. The author is participating on major programmes for future satellite and electric propulsion development. The author's research is performed in close collaboration with the Dresden University of Technology, the University of Bremen and the DLR Bremen.

This text discusses the skills and abilities that air-traffic controllers need. Its approach is international as air-traffic control practices throughout the world have to be mutually compatible and agreed. The book aims to include every kind of

This book describes most recent advances and limitations concerning design of adhesive joints under humid conditions and discusses future trends. It presents new approaches to predict the failure load after exposure to load, temperature and humidity over a long period of time. With the rapid increase in numerical computing power there have been attempts to formalize the different environmental contributions in order to provide a procedure to predict assembly durability, based on an initial identification of diffusion coefficients and mechanical parameters for both the adhesive and the interface. A coupled numerical model for the joint of interest is then constructed and this allows local water content to be defined and resulting changes in adhesive and interface properties to be predicted.

This is a thorough description of this increasingly important technology, starting from the development of head-up displays (HUDs), particularly specifications and standards and operational problems associated with HUD use. HUD involvement in spatial disorientation and its use in recognizing and recovering from unusual attitudes is discussed. The book summarizes the design criteria including hardware, software, interface and display criteria. It goes on to outline flight tasks to be used for evaluating HUDs and discusses the impact of HUDs on flight training. Recent work indicates that a HUD may allow a significant reduction in the time required to train a pilot on a particular aircraft, even considering non-HUD-related tasks. The author concludes with a review of unresolved HUD issues and recommendations for further research and provides an impressive bibliography, glossary and index. Within the military aviation sector the book will be of use to industry, research agencies, test pilot schools and air force training establishments. In the civil area regulatory authorities, airlines and industry will also have an increasing interest.