Part of Groundwater Set - Buy all six books and save over 30% on buying separately! Water Reclamation Technologies for Safe Managed Aquifer Recharge has been developed from the RECLAIM WATER project supported by the European Commission under Thematic Priority 'Global Change and Ecosystems' of the Sixth Framework Programme. Its strategic objective is to develop hazard mitigation technologies for water reclamation providing safe and cost effective routes for managed aquifer recharge. Different treatment applications in terms of behaviour of key microbial and chemical contaminants are assessed. Engineered as well as natural treatment trains are investigated to provide guidance for sustainable MAR schemes using alternative sources such as effluent and stormwater. The technologies considered are also well suited to the needs of developing countries, which have a growing need of supplementation of freshwater resources. A broad range of international full-scale case studies enables insights into long-term system behaviour, operational aspects, and fate of a comprehensive number of compounds and contaminants, especially organic micropollutants and bulk organics. Water Reclamation Technologies for Safe Managed Aquifer Recharge depicts advances in water reclamation technologies and aims to provide new process combinations to treat alternative water sources to appropriate water quality levels for sustainable aquifer recharge. Editors: Christian Kazner, RWTH Aachen University, Germany, Thomas Wintgens, University of Applied Sciences and Arts Northwestern Switzerland, Peter Dillon, CSIRO, Australia

Disinfection By-Products and Human Health is based on contributions from speakers who participated in May 2011 workshops on Disinfection By-Products (DBPs) and Human Health at Ozwater 11 in Adelaide, Australia or at an AWA sponsored workshop at the Curtin Water Quality Research Centre, Perth, Australia. The contributions are prepared to facilitate communication with practitioners, rather than researchers, making use of overview illustrations rather than dense text or data tables. Each chapter concludes with up to 5 key findings that are take-home messages for practitioners. Disinfection By-Products and Human Health is aimed specifically at drinking water professionals (engineers, chemists and public health professionals) working on the front lines of drinking water issues where they must encounter actual day-to-day issues of risk management concerning DBPs in relation to all the other regulatory and water quality issues they must manage. Although a topic this complex is certainly not amenable to simplistic explanations, this book aims to provide drinking water professionals with a pragmatic assessment of the current evidence and emerging issues concerning DBPs and public health. Disinfection By-Products and Human Health is an essential, practical and accessible guide for drinking water professionals, engineers, chemists and public health professionals. Editors: Steve E. Hrudey, Professor Emeritus, Analytical & Environmental Toxicology, University of Alberta, Canada, Jeffrey W.A. Charrois, Director and Associate Professor, Curtin Water Quality Research Centre, Curtin University of Technology, Australia, Steve Hrudey is professor emeritus in analytical and environmental toxicology in the University of Alberta's Faculty of Medicine & Dentistry. He spent 13 years as a cabinet-appointed member of the Alberta Environmental Appeals Board, the last four as chair, and was the first non-lawyer to hold this position. During this period, he served on 36 public hearing panels, 19 as chair of the panel. In addition he has testified before senate committees in Canada and the Legislative Council in Western Australia. Hrudey has served on a number of high-profile expert panels, including the Research Advisory Panel to the Walkerton Inquiry (2000-2002), the Expert Panel on Safe Drinking Water for First Nations (2006), the Technical Advisory Committee to the B.C. Minister of Health on turbidity and microbial risk in drinking water (2007-2008, as chair), the Expert Advisory Panel on Water Quality for Washington, D.C., to the U.S. Army Corps of Engineers (2009-2011) and chair of the Royal Society of Canada Expert Panel on Environmental and Health Impacts of Canada's Oil Sands Industry (2009-2010). He has also co-authored or edited nine books, including the widely acclaimed book inspired by the Walkerton tragedy: Safe Drinking Water - Lessons from Recent Outbreaks in Affluent Nations (IWA Publishing, 2004). He has written 26 book chapters, 19 expert panel reports, 163 refereed journal articles, 15 science discussions, six media op-eds and 73 conference proceeding papers. Hrudey is the 2012 winner of the American Water Works Association A.P. Black Research Award for contributions to water science and water supply. This book is sponsored by Australian Water Association (AWA)

Evolution of Water Supply Through the Millennia presents the major achievements in the scientific fields of water supply technologies and management throughout the millennia. It provides valuable insights into ancient water supply technologies with their apparent characteristics of durability, adaptability to the environment, and sustainability. A comparison of the water technological developments in several civilizations is undertaken. These technologies are the underpinning of modern achievements in water engineering and management practices. It is the best proof that "the past is the key for the future." Rapid technological progress in the twentieth century created a disregard for past water technologies that were considered to be far behind the present ones. There are a great deal of unresolved problems related to the management principles, such as the decentralization of the processes, the durability of the water projects, the cost effectiveness, and sustainability issues such as protection from floods and droughts. In the developing world, such problems were intensified to an unprecedented degree. Moreover, new problems have arisen such as the contamination of surface and groundwater. Naturally, intensification of unresolved problems led societies to revisit the past and to reinvestigate the successful past achievements. To their surprise, those who attempted this retrospect, based on archaeological, historical, and technical evidence were impressed by two things: the similarity of principles with present ones and the advanced level of water engineering and management practices. Evolution of Water Supply Through the Millennia is intended for engineers in water resources companies, hydraulic design companies, and water Institutes. It can be used for all courses related to water resources. Authors: Andreas N. Angelakis, Institute of Iraklion, National Foundation for Agricultural Research (N.AG.RE.F.), Greece, Larry W. Mays, School of Sustainable Engineering and the Built Environment, Arizona State University, USA, Demetris Koutsoyiannis, School of Civil Engineering, National Technical University of Athens, Greece, Nikos Manassis, School of Civil Engineering, National Technical University of Athens, Greece.

The focus of Water-Energy Interactions in Water Reuse is to collect original contributions and some relevant publications from recent conference proceedings in order to provide state-of-art information on the use of energy in wastewater treatment and reuse systems. Special focus is given to innovative technologies, such as membrane bioreactors, high pressure membrane filtration systems, and novel water reuse processes. A comparison of energy consumption in water reuse systems and desalination will be also provided. Water-Energy Interactions in Water Reuse covers the use of energy in conventional and advanced wastewater treatment for various water reuse applications, including carbon footprint, energy efficiency, energy self-sufficient facilities and novel technologies, such as microbial fuel cells and biogas valorisation. It is of real value to water utility managers; policy makers for water and wastewater treatment; water resources planners, and researchers and students in environmental engineering and science. Editors: Valentina Lazarova, Suez Environnement, France, Kwang-Ho Choo, Kyungpook National University, Korea, Peter Cornel, Technical University of Darmstadt, Germany

The scope of this comprehensive new edition of Handbook of Biological Wastewater Treatment ranges from the design of the activated sludge system, final settlers, auxiliary units (sludge thickeners and digesters) to pre-treatment units such as primary settlers and UASB reactors. The core of the book deals with the optimized design of biological and chemical nutrient removal. The book presents the state-of-the-art theory concerning the various aspects of the activated sludge system and develops procedures for optimized cost-based design and operation. It offers a truly integrated cost-based design method that can be easily implemented in spreadsheets and adapted to the particular needs of the user. Handbook of Biological Wastewater Treatment: Second Edition incorporates valuable new material that improves the instructive qualities of the first edition. The book has a new structure that makes the material more readily understandable and the numerous additional examples clarify the text. On the website www.wastewaterhandbook.com three free excel design spreadsheets for different configurations (secondary treatment with and without primary settling and nitrogen removal) can be downloaded to get the reader started with their own design projects. New sections have been added throughout: to explain the difference between true and apparent yield while the section on the F/M ratio, and especially the reasons not to use it, has been expanded; to demonstrate the effect of the oxygen recycle to the anoxic zones on both the denitrification capacity and the concept of available nitrate is explained in more detail. the latest developments on the causes and solution to sludge bulking and scum formation to show the rapid developments of innovative nitrogen removal and sludge separation problems the anaerobic pre-treatment section is completely rewritten based on the experiences obtained from an extensive review of large full-scale UASB based sewage treatment plants a new section on industrial anaerobic wastewater treatment three new appendices have been added. These deal with the calibration of the denitrification model, empirical design guidelines for final settler design (STORA/STOWA and ATV) and with the potential for development of denitrification in the final settler. A new chapter on moving bed biofilm reactors Handbook of Biological Wastewater Treatment: Second Edition is written for post graduate students and engineers in consulting firms and environmental protection agencies. It is an invaluable resource for everybody working in the field of wastewater treatment. Lecturer support material is available when adopted for university courses. This includes course material for the first 7 modules in the form of PDF printouts and an exercise file with questions and answers and a symbol list. AUTHORS Prof. dr. ir. A.C. van Haandel, Federal University of Campina Grande - Brazil Ir. J.G.M. van der Lubbe, Biothane Systems International - Veolia, The Netherlands Table of Contents INTRODUCTION ORGANIC MATERIAL AND BACTERIAL METABOLISM ORGANIC MATERIAL REMOVAL AERATION NITROGEN REMOVAL INNOVATIVE SYSTEMS FOR NITROGEN REMOVAL PHOSPHORUS REMOVAL SLUDGE SETTLING SLUDGE BULKING AND SCUM FORMATION MEMBRANE BIOREACTORS MOVING BED BIOFILM REACTORS SLUDGE TREATMENT AND DISPOSAL ANAEROBIC PRETREATMENT INTEGRATED COST-BASED DESIGN AND OPERATION Appendices DETERMINATION OF THE OXYGEN UPTAKE RATE CALIBRATION OF THE GENERAL MODEL THE NON-IDEAL ACTIVATED SLUDGE SYSTEM DETERMINATION OF NITRIFICATION KINETICS DETERMINATION OF DENITRIFICATION KINETICS EXTENSIONS TO THE IDEAL MODEL EMPIRIC METHODS FOR FINAL SETTLER SIZING RISK OF DENITRIFICATION IN THE FINAL SETTLER AEROBIC GRANULATED SLUDGE

This book is about how water managers in the United States are responding to the call for increased effort to achieve sustainable supplies of clean fresh water for present and future generations. The author, himself a participant in the water supply chain, demonstrates that while water is indeed one of life's most essential commodities, in many parts of the United States it is one of the most stressed resources. Throughout the book the author illustrates both the good and the bad efforts taken or not taken by water and wastewater management with real life examples. This book will appeal to the educators, students, volunteers, elected officials, regulators, and other participants with a role in helping the suppliers of water and wastewater services to achieve their goals providing clean, safe water on a sustainable basis.

Part of Metals and Related Substances in Drinking Water Set - buy all five books together to save over 30%! There is increasing concern regarding the presence of metals, particularly heavy metals in drinking water. In addition to the well-known toxic effects of lead, which are discussed at length in the Best Practice Guide on the Control of Lead in Drinking Water (in this series of Guides), the latest WHO guide values for maximum mean concentrations of arsenic, nickel and others in drinking water have been lowered compared to previous versions. European Union, USA and National standards for drinking water have followed the trend based largely on the same toxicological information. There is currently growing interest in the presence of hexavalent chromium in drinking water following its finding in some drinking waters in the USA above the national upper limit for total chromium and research suggesting that this limit needs to be considerably lowered. Some metals, particularly iron and manganese are associated with the production of discoloured (dirty) water in distribution systems and are therefore very important to the production of water with acceptable aesthetic qualities. Others (iron and aluminium) are key to the treatment of raw waters to drinking water standards. In most cases it is not possible to continuously monitor waters for metals and suitable sampling programmes must be designed and carried out to give results representative of the true water quality. The Best Practice Guide on Sampling and Monitoring of Metals in Drinking Water gives guidance on the design and quality control of sampling programmes for metals in Raw waters, in the water treatment works, in the drinking water distribution system and at the consumers tap. It also gives guidance on the analytical methods that can be used for the analysis of metals and quality control of those methods. Sampling programmes on the same water will vary according to the purpose for which they are carried out and the statistical techniques used to determine and design the different types of programme are outlined. Finally some case studies of optimisation of sampling are set out. Best Practice Guide on Sampling and Monitoring of Metals in Drinking Water is a valuable text for scientists, engineers and quality managers working in drinking water supply, laboratory managers and scientists who carry out sampling and analysis, and water industry consultants. It is also an excellent resource for post graduate and research workers in the field of drinking water. Editor: Dr Adam Postawa, AGH University, Krakow, Poland

Accurate prediction of wastewater pipe structural and functional deterioration plays an essential role in the utility asset management process and capital investment planning. The key to implementing an asset management strategy is a comprehensive understanding and prediction of asset condition and performance. The primary objective of this research is therefore to develop protocols and methods for predicting the remaining economic life of wastewater pipe assets. The limits of deterioration prediction capabilities are not in mathematical models or statistical analysis methods, but in lack of accurate and consistent data. This report presented the short-term phase-1 which has been completed with results from intensive literature reviews, various interviews with utilities, and pipe associations. In this phase, the research team investigated the life cycle of wastewater pipeline and identified the causes of pipe failure in different phases including design, manufacture, construction, operation and maintenance, and repair/rehabilitation/replacement. The Research team has prepared various modes and mechanisms of pipe failure in wastewater infrastructure system as well as identified environmental and societal consequences of the failure. After reviewing all relevant reports and utility databases, the research team has developed a set of standard pipe parameter list (data structure) and pipe data collection methodology. The data structure has been classified into Gold, Silver, Bronze and Wood standard.

Innovative and Integrated Technologies for the Treatment of Industrial Wastewater deals with advanced technological solutions for the treatment of industrial wastewater such as aerobic granular biomass based systems, advanced oxidation processes integrated with biological treatments, membrane contactors and membrane chemical reactors. Wastewater from pharmaceutical, chemical and food industries as well as landfill leachates are specifically considered as representative of major problems encountered when treating industrial streams. The economic and environmental sustainability of the above solutions are also reported in the book and compared with the alternatives currently available in the market by life cycle assessment (LCA) and life cycle costing (LCC) methodologies. The implementation of the considered solutions at large scale could support and enhance the competitiveness of different industrial sectors, including the water technology sector, in the global market. Innovative and Integrated Technologies for the Treatment of Industrial Wastewater also makes a contribution towards defining: new concepts, processes and technologies in wastewater treatment with potential benefits for the stable quality of effluents, energy and operational costs saving, and the protection of the environment new sets of advanced standards for wastewater treatment new methodologies for the definition of wastewater treatment needs and framework conditions new information supporting development and implementation of water legislation.

This book provides a state-of-the-art review of practice in the collection of rainwater. It presents case studies with numerous examples from around the world which will help anyone intending to design or construct a rainwater catchment system.The prime focus of the book is on implementation of roof and ground catchment systems for meeting either total or supplementary household water requirements. All aspects of design and construction are covered including simple methods of sizing systems, erection of gutters, choice of materials, construction techniques, training, operation, and maintenance. Ina addition, non-technical factors such as water quality, health, social, financial, cultural, political, institutional, and general issues are discussed. The text is fully supported with drawings, photographs, and detailed step-by step accounts for several different types of household rainwater tanks. The material is based on practical experience learned over 20 years of constructing and researching rainwater systems in Africa and Asia. It will be of use and interest to project managers, development workers, water engineers, architects, builders, and researchers.

The long-term viability and sustainability of biosolids land application is dependent on continuously earning stakeholder confidence, trust and support. This requires ongoing and effective engagement and communication with key stakeholders about the beneficial use of biosolids in their communities. The goal of the risk communications research was to develop processes, tools and materials to help biosolids managers conduct effective outreach and dialogue with key stakeholders in the communities where they operate, first on biosolids land application and its beneficial use, then on specific challenges such as communicating about potential health risks due to pathogens in biosolids. The researchers developed a state-of-the-science Strategic Risk Communications Process, tools and materials that can be adapted and used by biosolids program managers. The Process was applied and validated through two case studies, which involved in-depth research with landowners who receive biosolids and neighbors to biosolids land application sites and, in one case, community health officials. The research demonstrated that the key influence on these stakeholders' judgments on the acceptability of biosolids land application is the trust they have in the people who are producing the product, the people who are using the product and the people are overseeing and ensuring the safe appropriate use of biosolids. These stakeholders recognized the benefits and risks associated with biosolids land application and support its beneficial use. However, their support was not unconditional - they had questions about the long-term health and environmental impacts of such application. The process, tools and materials developed through this project will serve to address these and other key questions, while enabling biosolids managers to continually build stakeholder support for biosolids land application.

The emission rates of greenhouse gases (GHGs) from individual onsite septic systems used for the management of domestic wastewater were determined in this study. A static flux chamber method was used to determine the emission rates of methane, carbon dioxide, and nitrous oxide gases from eight septic tanks and two soil dispersal systems. A technique developed for the measurement of gas flow and concentration at clean-out ports was used to determine the mass flow of gases moving through the household drainage and vent system. There was general agreement in the methane emission rates for the flux chamber and vent system methods. Several sources of variability in the emission rates were also identified. The septic tank was the primary source of methane, whereas the soil dispersal system was the principal source of carbon dioxide and nitrous oxide emissions. Methane concentrations from the soil dispersal system were found to be near ambient concentrations, similarly negligible amounts of nitrous oxide were found in the septic tank. All emissions originating in the soil dispersal system were discharged through the building vent as a result of natural, wind-induced flow. The gaseous emission rate data were determined to be geometrically distributed. The geometric mean and standard deviation (sg) of the total atmospheric emission rates for methane, carbon dioxide, and nitrous oxide based on samples from the vent system were estimated to be 10.7 (sg = 1.65), 335 (sg = 2.13), and 0.20 (sg = 3.62) g/capita*d, respectively. The corresponding total anthropogenic CO2 equivalence (CO2e) of the GHG emissions to the atmosphere, is about 0.1 tonne CO2e/capita*yr.

This study focuses on sustainability impacts as wastewater treatment plants implement treatment technologies to meet increasingly stringent nutrient limits. The objective is to determine if a point of "diminishing returns" is reached where the sustainability impacts of increased levels of nutrient removal outweigh the benefits of better water quality. Five different hypothetical treatment trains at a nominal 10 mgd flow were developed to meet treatment targets that ranged from cBOD mode (Level 1) to four different nutrient removal targets. The nutrient removal targets ranged from 8 mg N/L; 1 mg P/L (Level 2) to the most stringent at <2 mg N/L; <0.02 mg P/L (Level 5). Given that sustainability is a broad term, the industry-accepted three pillars of sustainability were evaluated and discussed, and particular emphasis was placed on the environmental and economic pillars. The following variables received the most attention: greenhouse gas (GHG) emissions, a water quality surrogate that reflects potential algal growth, capital and operational costs, energy demand, and consumables such as chemicals, gas, diesel, etc. The results from the GHG emissions metric are shown below. Note that biogas cogeneration is represented by negative values as biogas production can be used to offset energy demands. The nitrous oxide (N2O) emissions values are based on the average biological nutrient removal (BNR) and non-BNR plants evaluated in the United States national survey by Ahn et al. (2010b). The error bars represent the data range of the national survey. The GHG emissions results suggest that a point of diminishing return is reached at Level 4 (3 mg N/L; 0.1 mg P/L). The GHG emissions show a steady increase from Levels 1 to 4, followed by a 65% increase when moving from Level 4 to 5. Despite a 70% increase in GHGs, the discharged nutrient load only decreases by 1% by going from Level 4 to 5. The primary contributors to GHG emissions are energy related (aeration, pumping, mixing). The GHG emissions associated with chemical use increases for the more stringent nutrient targets that required chemical treatment in addition to biological nutrient removal. In terms of cost, the total project capital cost increases approximately one-third from $9.3 million to $12.7 million for changing from Level 1 to 2, followed by a more than doubling in cost when changing from Level 1 to 5. Total project capital costs in this report are for a Greenfield plant. The operational cost increase between levels is more pronounced than total project capital cost with more than five-times increase from Level 1 to 5 ($250/MG treated to $1,370/MG treated, respectively). This report focused on in-plant (point source) options for nutrient removal and the implications for cost and sustainability. Other approaches, such as addressing non-point sources, could be added to the assessment. Rather than focusing strictly on point source dischargers and requiring Level 4 or 5 treatments, Level 3 or 4 treatments complimented with best management practices of non-point sources might be a more sustainable approach at achieving comparable water quality.

Part of Metals and Related Substances in Drinking Water Set - buy all five books together to save over 30%! Metals and Related Substances in Drinking Water comprises the proceedings of COST Action 637 - METEAU, held in Kristianstad, Sweden, October 13-15, 2010. This book collates the understanding of the various factors which control metals and related substances in drinking water with an aim to minimize environmental impacts. Metals and Related Substances in Drinking Water: Provides an overview of knowledge on metals and related substances in drinking water. Promotes good practice in controlling metals and related substances in drinking water. Helps to determining the environmental and socio-economic impacts of control measures through public participation Introduces the importance of mineral balance in drinking water especially when choosing treatment methods Shares practitioner experience. The proceedings of this international conference contain many state-of-the-art presentations by leading researchers from across the world. They are of interest to water sector practitioners, regulators, researchers and engineers.

Part of Groundwater Set - Buy all six books and save over 30% on buying separately! Groundwater serves many purposes. It is a source of public and private drinking water, it is utilized as an industrial feedstock and it is used in agriculture for irrigation and cattle watering. The abstraction of groundwater also serves many civil engineering purposes such as structures, construction pit dewatering and remediation of polluted groundwater. Furthermore, groundwater is increasingly used for supply and storage of energy for the cooling and heating of buildings. Many wells abstracting groundwater suffer from impaired performance as a result of clogging by mechanical or biogeochemical processes. This represents a significant economic loss due to volume reductions, cost of well rehabilitations or construction of new wells. Cause and Prevention of Clogging of Wells Abstracting Groundwater from Unconsolidated Aquifers provides a comprehensive description of the various causes and processes associated with well clogging in addition to describing methodologies for diagnosis and prevention.

Special Offer: KWR Drinking Water Treatment Set - Buy all five books together and save GBP119! Computational Fluid Dynamics (CFD) uses advanced numerical models to predict flow, mixing and (bio)-chemical reactions. In drinking water engineering, CFD is increasingly applied to predict the performance of treatment installations and to optimise these installations. A lack of understanding of the hydraulics in drinking water treatment systems has resulted in suboptimal design of installations. The formation of unwanted disinfection-by-products and the energy consumption or use of chemicals is therefore higher than necessary. The aim of this work is to better understand the hydraulic and (bio)-chemical processes in drinking water treatment installations using experimental and numerical techniques. By combining these techniques, CFD modelling is further developed as a tool to evaluate the performance of these installations. This leads to new insights in the applicability of models in ozone and UV systems, and new insights in design concepts of these systems. CFD modelling proves to be a powerful tool to understand the hydrodynamic and (bio)-chemical processes in drinking water systems. If applied properly, accounting for the complex turbulent motions and validated by experiments, this tool leads to a better design of UV reactors, ozone systems and other systems dictated by hydraulics.

The Lake Governance book will focus on comparative analysis of governance structures by examining policy, legal and institutional structures of current transboundary commissions to develop a common framework for good governance of transboundary lakes. Cooperation among nations sharing natural resources is important for sustainable use of the shared resources. Lakes contribute a big part to GDP in most of the countries and in some cases are also responsible for providing fisheries (for food, source of protein and livelihood). Climate change and associated risks and uncertainties add more complexity to the problems. This book will explore current water governance challenges, knowledge gaps and recommend a framework for good lake governance.

This book describes the ecosystem of the Andean watersheds, covering the Californian valley, tropical Andes, and southern Andes. Case studies of the new methods and techniques used for hydrological research in the Andes are provided, and sustainability issues pertaining to Andean water resources are discussed in the context of climate change, social and economic issues, and public policy. Furthermore, the impact of economic development on the Andean ecosystem, specifically the effect on the water cycle and the water-energy-food nexus, are examined.

Focuses on the application of membrane technologies in removing toxic metals\metalloids from water. Particular attention is devoted to the removal of arsenic, uranium, and fluoride. These compounds are all existing in the earth's crust at levels between two and five thousands micrograms per kg (parts per million) on average and these compounds can be considered highly toxic to humans, who are exposed to them primarily from air, food and water. In order to comply with the new maximum contaminant level, numerous studies have been undertaken to improve established treatments or to develop novel treatment technologies for removing toxic metals from contaminated surface and groundwater. Among the technologies available, applicable for water treatment, membrane technology has been identified as a promising technology to remove such toxic metals from water. The book describes both pressure driven (traditional processes, such as Nanofiltration, Reverse Osmosis, Ultrafiltration,etc) and more advanced membrane processes (such as forward osmosis, membrane distillation, and membrane bio-reactors) employed in the application of interest. Key aspect of this book is to provide information on both the basics of membrane technologies and on the results depending on the type of technology employed.

Part of Water Quality Set - Buy all four books and save over 30% on buying separately! Drinking Water Quality Management from Catchment to Consumer is a best practice book that builds on the experience of water suppliers and experts across the world in order to provide a practical guide to help utilities improve the management of drinking water quality. It is based on the Water Safety Plan approach and the principles of the Bonn Charter for Safe Drinking Water, and is intended to complement and support other relevant publications particularly the WHO Water Safety Plan Manual. It has evolved from the work of The Bonn Network which is a global group of water suppliers originally established to develop and share best practice in drinking water quality management based on the Bonn Charter. The emphasis is on practical information "by operators for operators", learning from the experience of a range of water suppliers across the world. The book supports and encourages users to think through the best way for them to improve drinking water quality management taking account of local factors. It recognises that whilst water suppliers are central to the provision of good drinking water, this has to take place within a broader legal, institutional, and financial framework which is the responsibility of Government and others. It thus highlights the ways that water suppliers can work with a range of partners to ensure that all are committed to the same goal of good safe drinking water. Drinking Water Quality Management from Catchment to Consumer is an essential reference for water quality, laboratory and operational managers from water utilities around the world. It is also helpful to consultants working in this area and regulatory, health and municipal, and catchment management authorities. The book is of interest to academics working in the field of drinking water quality, and risk management and may be used on any courses aimed at managing drinking water quality.

This book provides an ecosystem perspective in addressing the water resource management issues in the South Asian region. It argues that aspects such as sources of water, its distribution and users; land--water interrelations; drivers of change such as laws, policies and institutions; management of issues and technologies related to water supply; institutional set-up; economic instruments such as pricing, taxes, subsidies; and economics of ecosystem services are crucial. Climate changes, melting of glaciers and polar ice caps, rising sea level and the increased frequency of extreme events, have to be factored into integrated management of water resources. This book addresses some of these major issues related to aquatic ecosystems and focuses on three major aspects: (a) concepts related to ecosystems, ecosystem services and their linkages with water; (b) human impacts on ecosystems, particularly the aquatic ecosystems, and their assessment; and (c) the management, including policy, governance and economics. Comprising new theories, research and case studies, the book will be useful those concerned with water resource management -- professionals, students and researchers.

Water quality processes in the drinking water distribution network are strongly influenced by the flow velocity and residence time of the water in the network. In order to understand how the water quality changes in the drinking water distribution network, a good understanding of hydraulics is required. Specifically in the periphery of the network, where customers are connected, the hydraulics can change rapidly. During the night time the water is almost stagnant and the residence time increases. In the morning, when everybody gets up and flushes the toilet and takes a shower, high flow velocities can occur. During the remainder of the day flow velocities are low. The stochastic endues model SIMDEUM was developed to simulate water use on a small time scale (1 s) and small spatial scale (per fixture). SIMDEUM enables a good model of flow velocities, residence times and the connected water quality processes in the water distribution network. Stochastic Water Demand Modelling: Hydraulics in Water Distribution Networks describes the requirements of hydraulics in water quality modelling and provides insight into the development of detailed residential and non-residential water demand models. The book illustrates the use of detailed demand models in water quality models with respect to the variation in residence times and the relation with particle accumulation and resuspension. The models are compared to measurements in several real drinking water distribution networks.

Aerobic Wastewater Treatment Processes: History and Development discusses the widely differing influences on the development of aerobic treatment such as water supply, toxic trade effluents, microscopy and population growth in urban areas. It covers the historical development of sewage treatment and the emergence of aerobic biological treatment from the early nineteenth century to the present day. The importance of water supply and the influence this had on the water-carriage system is examined, as is the consequent discharge of sewage into rivers. The factors which govern process selection and process development are discussed. There is a continued impetus to reduce land area, capital costs, running costs, and to optimise performance and process control. The discovery of the activated sludge process is detailed including the development, in the early 1900s, of many forms of this process. Industrial wastes were discharged to biological treatment systems and the impact of such pollutants is reviewed. The work of Royal Commissions, River Boards and the National Rivers Authority is summarised, and the advances in chemical analysis and "on-line" measurement of chemical quality characteristics. Later developments such as reed beds and the use of hybrid treatment systems are covered. Examples are included such as the "fixed film" activated sludge process which has found application for small communities in package form, and also for large-scale municipal treatment plants. Aerobic Wastewater Treatment Processes: History and Development is valuable reading for students of the following courses on CIWEM Dip examination, WITA and B Tech and Environmental Science and Civil Engineering.

The Economics of Industrial Water Use presents an authoritative collection of the most important articles to have applied economic models and measurement techniques to the topic of industrial water use over the last thirty years. It includes an original introductory chapter which summarizes and critically assesses the literature on this important subject. These papers employ a range of modelling approaches including econometric estimation, linear programming, input-output models, non-market valuation and integrated river basin planning models. They also provide empirical evidence of the significant role played by economic forces in determining industrial water intake, discharge and recirculation. This comprehensive volume will be an indispensable reference source for those with an interest in water's role in industrial applications.

This book is open access under a CC BY 4.0 license. This volume focuses on microscopic plastic debris, also referred to as microplastics, which have been detected in aquatic environments around the globe and have accordingly raised serious concerns. The book explores whether microplastics represent emerging contaminants in freshwater systems, an area that remains underrepresented to date. Given the complexity of the issue, the book covers the current state-of-research on microplastics in rivers and lakes, including analytical aspects, environmental concentrations and sources, modelling approaches, interactions with biota, and ecological implications. To provide a broader perspective, the book also discusses lessons learned from nanomaterials and the implications of plastic debris for regulation, politics, economy, and society. In a research field that is rapidly evolving, it offers a solid overview for environmental chemists, engineers, and toxicologists, as well as water managers and policy-makers.