This book contains the proceedings ofthe meeting on "Applied Mathematics in the Aerospace Field," held in Erice, Sicily, Italy from September 3 to September 10, 1991. The occasion of the meeting was the 12th Course of the School of Mathematics "Guido Stampacchia," directed by Professor Franco Giannessi of the University of Pisa. The school is affiliated with the International Center for Scientific Culture "Ettore Majorana," which is directed by Professor Antonino Zichichi of the University of Bologna. The objective of the course was to give a perspective on the state-of the-art and research trends concerning the application of mathematics to aerospace science and engineering. The course was structured with invited lectures and seminars concerning fundamental aspects of differential equa tions, mathematical programming, optimal control, numerical methods, per turbation methods, and variational methods occurring in flight mechanics, astrodynamics, guidance, control, aircraft design, fluid mechanics, rarefied gas dynamics, and solid mechanics. The book includes 20 chapters by 23 contributors from the United States, Germany, and Italy and is intended to be an important reference work on the application of mathematics to the aerospace field. It reflects the belief of the course directors that strong interaction between mathematics and engineering is beneficial, indeed essential, to progresses in both areas."

Over the last 15 years, the application of innovative steel concepts in the automotive industry has increased steadily. Numerical simulation technology of hot forming of high-strength steel allows engineers to modify the formability of hot forming steel metals and to optimize die design schemes. Theories, Methods and Numerical Technology of Sheet Metal Cold and Hot Forming focuses on hot and cold forming theories, numerical methods, relative simulation and experiment techniques for high-strength steel forming and die design in the automobile industry. Theories, Methods and Numerical Technology of Sheet Metal Cold and Hot Forming introduces the general theories of cold forming, then expands upon advanced hot forming theories and simulation methods, including: the forming process, constitutive equations, hot boundary constraint treatment, and hot forming equipment and experiments. Various calculation methods of cold and hot forming, based on the authors' experience in commercial CAE software for sheet metal forming, are provided, as well as a discussion of key issues, such as hot formability with quenching process, die design and cooling channel design in die, and formability experiments. Theories, Methods and Numerical Technology of Sheet Metal Cold and Hot Forming will enable readers to develop an advanced knowledge of hot forming, as well as to apply hot forming theories, calculation methods and key techniques to direct their die design. It is therefore a useful reference for students and researchers, as well as automotive engineers.

The book presents the best articles presented by researchers, academicians and industrial experts in the International Conference on "Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering." The book discusses new concept designs, analysis and manufacturing technologies, where more swing is for improved performance through specific and/or multifunctional linguistic design aspects to downsize the system, improve weight to strength ratio, fuel efficiency, better operational capability at room and elevated temperatures, reduced wear and tear, NVH aspects while balancing the challenges of beyond Euro IV/Barat Stage IV emission norms, Greenhouse effects and recyclable materials. The innovative methods discussed in the book will serve as a reference material for educational and research organizations, as well as industry, to take up challenging projects of mutual interest.

Vehicle Power Management addresses the challenge of improving vehicle fuel economy and reducing emissions without sacrificing vehicle performance, reliability and durability. It opens with the definition, objectives, and current research issues of vehicle power management, before moving on to a detailed introduction to the modeling of vehicle devices and components involved in the vehicle power management system, which has been proven to be the most cost-effective and efficient method for initial-phase vehicle research and design. Specific vehicle power management algorithms and strategies, including the analytical approach, optimal control, intelligent system approaches and wavelet technology, are derived and analyzed for realistic applications. Vehicle Power Management also gives a detailed description of several key technologies in the design phases of hybrid electric vehicles containing battery management systems, component optimization, hardware-in-the-loop and software-in-the-loop. Vehicle Power Management provides graduate and upper level undergraduate students, engineers, and researchers in both academia and the automotive industry, with a clear understanding of the concepts, methodologies, and prospects of vehicle power management.

Modern society is, to a great extent, characterised by a tremendous growth in transportation -- the freedom to travel is a central and fundamental human value. As mobility has increased so have health problems. The number of fatalities and serious injuries caused by road traffic is unacceptable, and, while a downward trend is visible in most countries, there still remains a lot to be done. This collection of contributions by scientists and administrators presents some of the latest findings in the area of mobility and its relation to medical treatment, rehabilitation, public health and prevention.

Over the last decade, flow visualization has advanced in step with the progress in laser and computer technologies. The scope of the International Symposium on Flow Visualiza- tion will be broader than ever, covering the range of infor- mation generally thought of as nonvisual and reflecting the inclusion of computer - aided methodologies. The Sixth In- ternational Symposium on Flow Visualization aims to attract the participation of experts and users of flow viualizing techniques on furthering an advanced philosophy for the de- velopment of the methods and their applications.

This volume contains the papers presented. at the Third IFIP International Working Conference on Dependable Computing for Critical Applications, sponsored by IFIP Working Group 10.4 and held in Mondello (Sicily), Italy on September 14-16, 1992. System developers increasingly apply computers where they can affect the safety and security of people and equipment. The Third IFIP International Working Conference on Dependable Computing for Critical Applications, like its predecessors, addressed various aspects of computer system dependability, a broad term defined as the degree of trust that may justifiably be placed in a system's reliability, availability, safety, security, and performance. Because the scope of the conference was so broad, we hope the presentations and discussions will contribute to the integration of these concepts so that future computer-based systems will indeed be more dependable. The Program Committee selected 18 papers for presentation from a total of 7 4 submissions at a May meeting in Newcastle upon Tyne, UK. The resulting program represented a broad spectrum of interests, with papers from universities, corporations, and government agencies in eight countries. Much diligent work by the Program Committee and the quality of reviews from more than a hundred external referees from around the world, for which we are most grateful, significantly eased the production of this technical program.

This book will consist of a coherent collection of recent results on near wall turbulence including theory, new experiments, DNS, and modeling with RANS, LES and Low Order Dynamical Systems.

The author developed this text over many years, teaching graduate courses in advanced dynamics and flexible multibody dynamics at the Daniel Guggenheim School of Aerospace Engineering of the Georgia Institute of Technology.

The book presents a unified treatment of rigid body dynamics, analytical dynamics, constrained dynamics, and flexible multibody dynamics. A comprehensive review of numerical tools used to enforce both holonomic and nonholonomic constraints is presented. Advanced topics such as Maggi s, index-1, null space, and Udwadia and Kalaba s formulations are presented because of their fundamental importance in multibody dynamics. Methodologies for the parameterization of rotation and motion are discussed and contrasted. Geometrically exact beams and shells formulations, which have become the standard in flexible multibody dynamics, are presented and numerical aspects of their finite element implementation detailed. Methodologies for the direct solution of the index-3 differential-algebraic equations characteristic of constrained multibody systems are presented. It is shown that with the help of proper scaling procedures, such equations are not more difficult to integrate than ordinary differential equations.

This book is illustrated with numerous examples and should prove valuable to both students and researchers in the fields of rigid and flexible multibody dynamics."

"

"

The book on Sustainable Automotive Technologies aims to draw special attention to the research and practice focused on new technologies and approaches capable of meeting the challenges to sustainable mobility. In particular, the book features incremental and radical technical advancements that are able to meet social, economic and environmental targets in both local and global contexts. These include original solutions to the problems of pollution and congestion, vehicle and public safety, sustainable vehicle design and manufacture, new structures and materials, new power-train technologies and vehicle concepts. In addition to vehicle technologies, the book is also concerned with the broader systemic issues such as sustainable supply chain systems, integrated logistics and telematics, and end-of-life vehicle management. It captures selected peer reviewed papers accepted for presentation at the 4th International Conference on Sustainable Automotive Technologies, ICSAT2012, held at the RMIT, Melbourne, Australia.

Composed of papers written by leading engineers and scientists in the field, this valuable collection reports the most recent advances in cryocooler development, contains extensive performance test results and comparisons, and relates the latest experience in integrating cryocoolers into advanced applications.

The events leading up to the publication of this book started effectively in 1976 with the exchange of information between those modelling teams in Europe which were involved in the R&D-programme on Solar Energy of the Commission. When it became clear that the availability of experimental datafor model validation wm next to nothing, the Commission took the initiative to support in the frame of the Solar Energy R&D-programme the construction of Solar Pilot Test Facilities on eight sites in Europe. Each experimental facility consisted of two real solar heating systems with collectors, storage, controls, and msociated piping, but with the dwelling thermal distribution system replaced by a physical load simulator. One of the two systems on each site wm a reference system and wm identical for the eight participating teams. The simulator wm capable of producing a typical themalload for a house, interactive with the actual weather, and took into account the effects of the occupants. With datafrom these facilities not only were national simulation programs validated, but also the meanwhile commonly accepted modular structured European program EMGPl wm validated. EMGPl, which only could be run on a mainframe computer or under special conditions on a mini-computer, formed in tum the bmis for the development of EURSOL andEMGP3.EMGP3 is an improved userjriendly programpackagejorpersonal computers derived jrom EMGPl and includes a unique and user jriendly preprocessor.

For the second time, the Eurotherm Committee has chosen Thermal Managment of Electronic Systems as the subject for its 45th Seminar, held at IMEC in Leuven, Belgium, from 20 to 22 September 1995. After the successfui first edition of this seminar in Delft, June 14-16, 1993, it was decided to repeat this event on a two year basis. This volume constitutes the edited proceedings of the Seminar. Thermal management of electronic systems is gaining importance. Whereas a few years ago papers on this subject where mainly devoted to applications in high end markets, such as mainframes and telecommunication switching equipment, we see a growing importance in the "lower" end applications. This may be understood from the growing impact of electronics on every day life, from car electronics, GSM phones, personal computers to electronic games. These applications add new requirements to the thermal design. The thermal problem and the applicable cooling strategies are quite different from those in high end products. In this seminar the latest developments in many of the different aspects of the thermal design of electronic systems were discussed. Particular attention was given to thermal modelling, experimental characterisation and the impact of thermal design on the reliability of electronic systems.

Ake Nygren Karolinska Institute, Sweden would like to welcome you on behalf of Karolinska Institute, I one of the organizers and initiators of this series of confer- ences on traffic safety. The conference we are opening today is the fourth in the series. Karolinska Institute is the largest medical university in Sweden. It is dedicated to improving health through research, educa- tion and dissemination of information and ideas. The series on traffic safety is one of the ways in which we are disseminating information and ideas on an international front. Karolinska Institute is 190 years old. The Medico Chirurgiska Institute was originally established in 1811 by royal decree after wars and cholera epidemics. In 1822, it became known by the name "Carolinska" . Amongst many other international endeavors, Karolinska Institute is perhaps best known for the nomination and appointments of Nobel Prize winners in medicine and physiology. Under the terms of Alfred Nobel's will, the prize winners are nominated and chosen by the Nobel Assembly of Karolinska Institute. During the hundred years that the prize has been in existence, several researchers from Karolinska Institute have become laureates. These are Hugo Theorell in 1955; Ragnar Granit in 1967; Ulf von Euler in 1970; and Sune Bergstrom and Bengt Samuelsson in 1982. In 1987, the medicine prize was awarded to Tonegawa from v Japan and in 1994 the literature prize was awarded to Oe Kenzaburo.

The thrust of modern research on turbulence in fluids is concerned with coherent structures and modelling. Riblets have been shown to reduce drag, and the papers presented in this volume tackle the main question of the mechanism responsible for this behaviour in turbulent flow. The contributions in this volume were presented at the Sixth Drag Reduction Meeting held at Eindhoven during November 1991. This volume will be a useful reference work for engineers, physicists and applied mathematicians interested in the topic of fluid turbulence.

OO It is a matter of general consensus that in the last decade the H _ optimization for robust control has dominated the research effort in control systems theory. Much attention has been paid equally to the mathematical instrumentation and the computational aspects. There are several excellent monographs that cover the standard topics in the area. Among the recent issues we have to cite here Linear Robust Control authored by Green and Limebeer (Prentice Hall 1995), Robust Controller Design Using Normalized Coprime Factor Plant Descriptions - by McFarlane and Glover (Springer Verlag 1989), Robust and Optimal Control - by Zhou, Doyle and Glover (Prentice Hall 1996). Thus, when the authors of the present monograph decided to start the work they were confronted with a very rich literature on the subject. However two reasons motivated their initiative. The first concerns the theory in which the whole development of the book was embedded. As is well known, there are several ways of approach oo ing H and robust control theory. Here we mention three relevant direc tions chronologically ordered: a) the first makes use of a generalization of the Beurling-Lax theorem to Krein spaces; b) the second makes use of a generalization of Nevanlinna-Pick interpolation theory and commutant lifting theorem; c) the third, and probably the most attractive from an el evate engineering viewpoint, is the two Riccati equations based approach which offers a complete solution in state space form."

This book comprises the refereed proceedings of the International Conferences, MAS and ASNT 2012, held in conjunction with GST 2012 on Jeju Island, Korea, in November/December 2012.
The papers presented were carefully reviewed and selected from numerous submissions and focus on the various aspects of modeling and simulation, and automotive science and technology.

Robust Modal Control covers most classical multivariable modal control design techniques that were shown to be effective in practice, and in addition proposes several new tools. The proposed new tools include: minimum energy eigenvector selection, low order observer-based control design, conversion to observer-based controllers, a new multimodel design technique, and modal analysis. The text is accompanied by a CD-ROM containing MATLAB(r) software for the implementation of the proposed techniques. The software is in use in aeronautical industry and has proven to be effective and functional.
For more detail, please visit the author's webpage at http: //www.cert.fr/dcsd/idco/perso/Magni/booksandtb.html

fifteen countries in Scandinavia, Europe, Asia, Australia, and U.S.A. All of them came to Stockholm primarily because they recognize the growing im portance of networks as complex systems, and their home institutions do not offer any systematic lectures on this topic. The Networks Course was originally initiated jointly by the Summer University of Southern Stockholm Foundation and the County Council of Stockholm, the Swedish Aviation Administration, the Swedish National Road Administration, the Swedish Post, the Swedish State Railways, and Telia AB. They have all served as joint sponsors and hosts for the Course. In the year 1993 the Course also was sponsored by the Swedish Transport and Communications Research Board. All these organizations have supported the publication of a series of key lectures from the Course, to be released as a single volume entitled Networks in Action. It is the ambition of the Foundation to create continuity in its activities for the future. The board has proposed to its principals to take a decision in this direction. It is my expectation that this will be the case for the Networks Course from 1995. This book will then serve as a basic reference for use in an era when the topic of Communication-Networks will be included on a permanent basis in the Summer University's agenda."

Because of the growing interest in hypersonic flows, the AGARD Fluid Dynamics Panel initiated a sub-working group on instrumentation for hypersonics in 1989. This sub-group, chaired by J. WENDT (VKI -Belgium), was composed of: A. BOUTIER (ONERA -France), K. BUTEFISCH (DLR -Germany), R. CATTOLICA (SANDIA Lab. -USA), V. CLINE (AEDC -USA), A. GIRARD (ONERA -France), R. McKENZIE (NASA Ames -USA), S. OCHELTREE (NASA Langley -USA) and G. SMEETS (ISL -Franco-German Inst.). As a result of several meetings, the idea came to organize this workshop, 27th April - 1st May 1992, on "New Trends in Instrumentation for Hypersonic Research", at Le Fauga-Mauzac ONERA center, in France, where the new hot-shot arc-heated facility F4, as well as a new conference building, were recently completed. This workshop has been organized in close connection with the AGARD FDP Symposium to be held in Torino 4 - 8 May 1992 on "Theoretical and Experimental Methods in Hypersonic Flows": the main conclusions and ideas expressed by the papers and during the discussions of this workshop are reported in session 7 and have been presented in Torino in a special Instrumentation session. As chairman of this workshop, I express many thanks to the Organizing Committee composed of Karl BUTEFISCH, Andre GIRARD, Stewart OCHELTREE and John WENDT for their very constructive help, leading to a meeting that was recognized to be very fruitful for all the participants.

Aerospace Marketing Management is a marketing manual devoted to: -the aeronautics sector: parts suppliers, aircraft manufacturers, and airlines, -the space sector: suppliers, integrators, and service providers. It presents the essentials of marketing from basic concepts such as segmentation, positioning and the marketing plan, to the product policy, pricing, distribution and communication. This book also includes specific chapters on project marketing, brand policy, gaining loyalty through maintenance and training, compensation, and alliance strategies. The different chapters show the new changes due to Internet: -e-procurement for the purchase strategy, -interactive communication with websites, -e-ticketing for the airlines to reach final consumers.

In this book, regular structures are de ned as periodic structures consisting of repeated elements (translational symmetry) as well as structures with a geom- ric symmetry. Regular structures have for a long time been attracting the attention of scientists by the extraordinary beauty of their forms. They have been studied in many areas of science: chemistry, physics, biology, etc. Systems with geometric symmetry are used widely in many areas of engineering. The various kinds of bases under machines, cyclically repeated forms of stators, reduction gears, rotors with blades mounted on them, etc. represent regular structures. The study of real-life engineering structures faces considerable dif culties because they comprise a great number of working mechanisms that, in turn, consist of many different elastic subsystems and elements. The computational models of such systems represent a hierarchical structure and contain hundreds and thousands of parameters. The main problems in the analysis of such systems are the dim- sion reduction of model and revealing the dominant parameters that determine its dynamics and form its energy nucleus. The two most widely used approaches to the simulation of such systems are as follows: 1. Methods using lumped parameters models, i.e., a discretization of the original system and its representation as a system with lumped parameters [including nite-element method (FEM)]. 2. The use of idealized elements with distributed parameters and known analytical solutions for both the local elements and the subsystems.

Electromagnetic Signals deals with the practical applications of nonsinusoidal electromagnetic waves or carrier free radars, ultrawideband technology and large relative bandwidth technology. The book is unique since it deals with a number of current conventional radar problems along with proposed solutions.