This multi-author contributed volume gives a comprehensive overview of recent progress in various vibrational spectroscopic techniques and chemometric methods and their applications in chemistry, biology and medicine. In order to meet the needs of readers, the book focuses on recent advances in technical development and potential exploitations of the theory, as well as the new applications of vibrational methods to problems of recent general interest that were difficult or even impossible to achieve in the not so distant past. Integrating vibrational spectroscopy and computational approaches serves as a handbook for people performing vibrational spectroscopy followed by chemometric analysis hence both experimental methods as well as procedures of recommended analysis are described. This volume is written for individuals who develop new methodologies and extend these applications to new realms of chemical and medicinal interest.

This is a comprehensive piece of work providing the reader a powerful resource for the design, development and performance evaluation of photocatalytic reactors. This book will be used as a reference for a graduate course in photocatalysis. It will also be valuable to undergraduate students, graduate students, researchers, environmental consultants or advisors, environmental auditors, engineers, technicians, scientists, governmental agencies, and environmental agencies or institutions interested in photocatalysis. This book will be a guide to the understanding of the principles and of the applications of photocatalysis technology. The book is also organized in such a manner that there is always good integration of basic principles, literature review, and applications.

The main focus of this book is on the chemical reaction engineering aspects of the heterogeneous photocatalysis. Special attention is addressed to kinetic modeling, reactor irradiation, and reactor design of photochemical reactors. The book also reports an interesting review of practical applications of pollutant conversion in water and air.

Hydrogen peroxide is a chemical that is becoming increasingly fashionable as an oxidant, both in industry and in academia and whose production is expected to increase significantly in the next few years. This growth in interest is largely due to environmental considerations related to the clean nature of hydrogen peroxide as an oxidant, its by-product being only water. To date this chemical has largely been employed as a non-selective oxidant in operations like the bleaching of paper, cellulose and textiles, or in the formulation of detergents, and only to a minimal extent in the manufacture of organic chemicals. This book has been organized to cover the different aspects of the chemistry of hydrogen peroxide. The various chapters into which the book is divided have been written critically by the authors with the general aim of stimulating new ideas and emphasizing those aspects that are likely to lead to new developments in organic synthesis in the coming future.

This advanced textbook teaches readers to design kinetic experiments involving heterogeneous catalysts, to characterize these catalysts, to acquire rate data, to find heat and mass transfer limitations in these data, to select reaction models, to derive rate expressions based on these models, and to assess the consistency of these rate equations. Special emphasis is placed on assessing mass transfer effects. Discussion of adsorption isotherms and reaction models explains the limitations of these models and their application. Ideal and nonideal surfaces are considered, as well as enzyme catalysis. It contains exercises and worked examples abound. The book will be used in courses in kinetics or catalysis and also as a supplement in advanced chemical engineering courses on kinetics and reactor design. It will be used in the disciplines of Chemical Engineering, Materials Science, Fuels Science, and Chemistry.

There is an increasing challenge for chemical industry and research institutions to find cost-efficient and environmentally sound methods of converting natural resources into fuels chemicals and energy. Catalysts are essential to these processes and the Catalysis Specialist Periodical Report series serves to highlight major developments in this area. This series provides systematic and detailed reviews of topics of interest to scientists and engineers in the catalysis field. The coverage includes all major areas of heterogeneous and homogeneous catalysis and also specific applications of catalysis such as NOx control kinetics and experimental techniques such as microcalorimetry. Each chapter is compiled by recognised experts within their specialist fields and provides a summary of the current literature. This series will be of interest to all those in academia and industry who need an up-to-date critical analysis and summary of catalysis research and applications. Catalysis will be of interest to anyone working in academia and industry that needs an up-to-date critical analysis and summary of catalysis research and applications. Specialist Periodical Reports provide systematic and detailed review coverage in major areas of chemical research. Compiled by teams of leading experts in their specialist fields, this series is designed to help the chemistry community keep current with the latest developments in their field. Each volume in the series is published either annually or biennially and is a superb reference point for researchers. www.rsc.org/spr

Chemical Kinetics and Reaction Dynamics brings together the major facts and theories relating to the rates with which chemical reactions occur from both the macroscopic and microscopic point of view. This book helps the reader achieve a thorough understanding of the principles of chemical kinetics and includes:

• Detailed stereochemical discussions of reaction steps
• Classical theory based calculations of state-to-state rate constants
• A collection of matters on kinetics of various special reactions such as micellar catalysis, phase transfer catalysis, inhibition processes, oscillatory reactions, solid-state reactions, and polymerization reactions at a single source.

The growth of the chemical industry greatly depends on the application of chemical kinetics, catalysts and catalytic processes. This volume is therefore an invaluable resource for all academics, industrial researchers and students interested in kinetics, molecular reaction dynamics, and the mechanisms of chemical reactions.

In this introductory chemical physics textbook, the authors discuss the interactions, bonding, electron density, and experimental techniques of free molecules, and apply spectroscopic methods to determine molecular parameters, dynamics, and chemical reactions.

Valentine P. Ananikov, Irina P. Beletskaya: Alkyne and alkene insertion into metal-heteroatom and metal-hydrogen bonds the key stages of hydrofunctionalization process.- Akihiko Ishii* and Norio Nakata: The Mechanism for Transition Metal-Catalyzed Hydrochalcogenation of Unsaturated Organic Molecules.- A. L. Reznichenko and Kai C. Hultzsch: Early Transition Metal (Group 3-5, Lanthanides and Actinides) and Main Group Metal (Group 1, 2, and 13) Catalyzed Hydroamination.- Naoko Nishina and Yoshinori Yamamoto: Late transition metal catalyzed hydroamination.- Sumod A. Pullarkat and Pak-Hing Leung: Chiral Metal Complex Promoted Asymmetric Hydrophosphinations.- Masato Tanaka: Recent Progress in Transition Metal-Catalyzed Addition Reactions of H-P(O) Compounds with Unsaturated Carbon Linkages.- Christian Bruneau: Group 8 metals-catalyzed O-H bond addition to unsaturated molecules.- Giorgio Abbiati, Egle M. Beccalli, Elisabetta Rossi: Groups 9 and 10 metals-catalyzed O-H bond addition to unsaturated molecules.- Nuria Huguet and Antonio M. Echavarren: Gold-Catalyzed O-H Bond Addition to Unsaturated Organic Molecules.- Akiya Ogawa: Transition-Metal-Catalyzed S-H and Se-H Bonds Addition to Unsaturated Molecules."

In this thesis, the focus is on the study of new catalytic properties of unsupported nanoporous metals in heterogeneous organic reactions under liquid-phase conditions. The author was the first to fabricate nanoporous copper with tunable nanoporosity and apply it for organic reactions. The catalyst can be reused up to ten times without loss of catalytic activity. In addition, the author developed the highly selective semihydrogenation of alkynes using nanoporous gold as a catalyst for the first time, affording Z-alkenes in 100% selectivity, which cannot be realized by traditional catalysts. All of the results described here will help readers to develop new catalytic performance of nanoporous metals for organic reactions.

This book introduces the reader to the state of the art in nanostructured anode and cathode electrocatalysts for low-temperature acid and alkaline fuel cells. It explores the electrocatalysis of anode (oxidation of organic molecules) and cathode (oxygen reduction) reactions. It also offers insights into metal-carbon interactions, correlating them with the catalytic activity of the electrochemical reactions. The book explores the electrocatalytic behaviour of materials based on noble metals and their alloys, as well as metal-metal oxides and metal-free nanostructures. It also discusses the surface and structural modification of carbon supports to enhance the catalytic activity of electrocatalysts for fuel-cell reactions.

As the demands put on the polymer/metal interface, particularly by the microelectronics industry, become more and more severe, the necessity for understanding this interface, its properties and its limitations, becomes more and more essential. This requires a broad knowledge of, and a familiarity with, the latest findings in this rapidly advancing field. At the very least, such familiarity requires an exchange of infonnation, particularly among those intimately involved in this field. Communications among many of us in this area have made one fact quite obvious: the facilities provided by existing organizations, scientific and otherwise, do not offer the forum necessary to accomplish this exchange of infonnation. It was for this reason that Jean-Jacques Pireaux, Steven Kowalczyk and I organized the first Metallization of Polymers, a symposium sponsored by the American Chemical Society, which took place in Montreal, September 25-28, 1989; the Proceedings from that symposium were published as ACS Symposium Series 440, (1990). It is this same per ceived lack of a proper forum, and the encouragement of my colleagues, that prompted me to organize this meeting, so as to bring to the attention of the participants new instruments, materials, methods, advances, and, particularly, thoughts in the field of polymer metalliza tion. The meeting was designed as a workshop, with time being made available throughout for discussion and for the consideration of new findings."

There is an increasing challenge for chemical industry and research institutions to find cost-efficient and environmentally sound methods of converting natural resources into fuels chemicals and energy. Catalysts are essential to these processes and the Catalysis Specialist Periodical Report series serves to highlight major developments in this area. This series provides systematic and detailed reviews of topics of interest to scientists and engineers in the catalysis field. The coverage includes all major areas of heterogeneous and homogeneous catalysis and also specific applications of catalysis such as NOx control kinetics and experimental techniques such as microcalorimetry. Each chapter is compiled by recognised experts within their specialist fields and provides a summary of the current literature. This series will be of interest to all those in academia and industry who need an up-to-date critical analysis and summary of catalysis research and applications. Catalysis will be of interest to anyone working in academia and industry that needs an up-to-date critical analysis and summary of catalysis research and applications. Specialist Periodical Reports provide systematic and detailed review coverage in major areas of chemical research. Compiled by teams of leading experts in their specialist fields, this series is designed to help the chemistry community keep current with the latest developments in their field. Each volume in the series is published either annually or biennially and is a superb reference point for researchers. www.rsc.org/spr

The three sections of this volume deal with topics of broad interest. The first deals with cetyl alcohol and is a most comprehensive study of this essential ingredient in the cosmetic and pharmaceutical industry, with an explanation of its functionality. The second is a most comprehensive, up-to-date review of acid/base interactions of a variety of materials, including small molecules, proteins and polyelectrolytes. The third section describes the combined radiochemical and electrochemical methods in the evaluation of the properties of solids in contact with solutions.

The term " nite Fermi systems" usually refers to systems where the fermionic nature of the constituents is of dominating importance but the nite spatial extent also cannot be ignored. Historically the prominent examples were atoms, molecules, and nuclei. These should be seen in contrast to solid-state systems, where an in nite extent is usually a good approximation. Recently, new and different types of nite Fermi systems have become important, most noticeably metallic clusters, quantum dots, fermion traps, and compact stars. The theoretical description of nite Fermi systems has a long tradition and dev- oped over decades from most simple models to highly elaborate methods of ma- body theory. In fact, nite Fermi systems are the most demanding ground for theory as one often does not have any symmetry to simplify classi cation and as a possibly large but always nite particle number requires to take into account all particles. In spite of the practical complexity, most methods rely on simple and basic schemes which can be well understood in simple test cases. We therefore felt it a timely undertaking to offer a comprehensive view of the underlying theoretical ideas and techniques used for the description of such s- tems across physical disciplines. The book demonstrates how theoretical can be successively re ned from the Fermi gas via external potential and mean- eld m- els to various techniques for dealing with residual interactions, while following the universality of such concepts like shells and magic numbers across the application elds.

This volume presents new methodologies and rationalizes existing methods that are used in the design of multi-shell polyhedral clusters. The author describes how the methods used are extended from 2D-operations on maps to 3D (and higher dimensional) Euclidean space. A variety of structures is designed and described in detail and classified giving rise to an atlas of multi-shell nanostructures. The book therefore sheds a new light on the field of crystal and quasicrystal structures, an important part of nanoscience and nanotechnology. The author goes on to show how the recently established methods are used for building complex multi-shell nanostructures and how this completes the existing information in the field. The atlas of such structures is completed with atomic coordinates (included as supplementary material). The content of this book gives a useful insight into structure elucidation and suggests new material synthesis.

This book focuses on the essential scientific ideas and breakthroughs in the last three decades for organic solar cells that have realized practical applications. The motivation for publishing this book is to explain how those essential ideas have arisen and to provide a foundation for future progress by target readers-students, novices in the field, and scientists with expertise. The main topics covered in the book include the fundamental principles and history of organic solar cells, blended junction, nanostructure control, photocurrent generation, photovoltage generation, doping, practical organic solar cells, and possible ideas for the future. The editors enthusiastically anticipate the vigorous development of the field of organic solar cells by young scientists of the next generation.

This book describes radionanomedicine as an integrated medicine using exogenous and endogenous This book describes radionanomedicine as an integrated approach that uses exogenous and endogenous nanomaterials for in vivo and human applications. It comprehensively explains radionanomedicine comprising nuclear and nanomedicine, demonstrating that it is more than radionanodrugs and that radionanomedicine also takes advantage of nuclear medicine using trace technology, in which miniscule amounts of materials and tracer kinetic elucidate in vivo biodistribution. It also discusses exogenous nanomaterials such as inorganic silica, iron oxide, upconversion nanoparticles and quantum dots or organic liposomes labelled with radioisotopes, and radionanomaterials used for targeted delivery and imaging for theranostic purposes. Further, it examines endogenous nanomaterials i.e. extracellular vesicles labelled with radioisotopes, known as radiolabelled extracellular vesicles, as well as positron emission tomography (PET) and single photon emission computed tomography (SPECT), which elucidate the biodistribution and potential for therapeutic success.

Transparent conducting materials are key elements in a wide variety of current technologies including flat panel displays, photovoltaics, organic, low-e windows and electrochromics. The needs for new and improved materials is pressing, because the existing materials do not have the performance levels to meet the ever- increasing demand, and because some of the current materials used may not be viable in the future. In addition, the field of transparent conductors has gone through dramatic changes in the last 5-7 years with new materials being identified, new applications and new people in the field. "Handbook of Transparent Conductors" presents transparent conductors in a historical perspective, provides current applications as well as insights into the future of the devices. It is a comprehensive reference, and represents the most current resource on the subject.

Some years ago, I agreed to contribute a volume to the Academic Press 'Organo metallic Chemistry' series - the metals to be covered were rhodium and iridium. Initially, my plan was to discuss both the fundamental organometallic chemistry and applications in organic synthesis. When the first draft of the manuscript was complete, it was apparent that I had exceeded my allowance of pages by a huge amount. It was then that I decided that the catalysis section warranted separate treatment. I am grateful to Reidel for agreeing to publish this volume on Homogeneous Catalysis with Compounds of Rhodium and Iridium as part of their 'Catalysis by Metal Complexes' series. The material I had for the original Academic Press project covered the litera ture to the end of 1978. I decided to update this to the end of 1982 with a few key references from 1983. It is some measure of the rate of progress in this field that the number of references almost doubled during this revision."

This volume constitutes the proceedings of the Fourth International Workshop on Materials Processing at High Gravity, held at Clarkson University, May 29 to June 2, 2000. There were 73 attendees from 16 countries. Since the topics extended well beyond materials processing, it was felt appropriate to name this proceedings "Centrifugal Processing." Processing by Centrifugation includes the traditional bench-scale centrifuges, as well as all rotating systems utilizing the centrifugal and Coriolis forces to provide unique performance. Centrifugation led to the formation of sticky porous Teflon membranes, as well as improved polymeric solar cells. Centrifugation on large equipment improved the chemical vapor deposition of diamond films, influenced the growth and dissolution of semiconductor crystals, and elucidated the influence of gravity on coagulation of colloidal Teflon. A million g centrifuge was constructed and used to study sedimentation in solids and to prepare compositionally graded materials and new phases. Rotation of a pipe about its axis allowed the casting of large-diameter metal alloy pipes as well as coating the interior of pipes with a cermet utilizing self-propagating high-temperature synthesis. Such coatings are highly corrosion and erosion resistant. Flow on a rotating disk was shown to be useful for process intensification, such as large-scale manufacturing of nano-particles, polymerization reactions, and heat & mass transfer. Several theoretical studies dealt with the influence of rotation on fluid convection on surfaces and in pipes, tubes, and porous media. These have applications to integrated-circuit chip manufacturing, alloy casting, oil production, crystal growth, and the operation of rotating machinery.

This book is based on a one-semester course for advanced undergraduates specializing in physical chemistry. I am aware that the mathematical training of most science majors is more heavily weighted towards analysis - typ- ally calculus and differential equations - than towards algebra. But it remains my conviction that the basic ideas and applications of group theory are not only vital, but not dif?cult to learn, even though a formal mathematical setting with emphasis on rigor and completeness is not the place where most chemists would feel most comfortable in learning them. The presentation here is short, and limited to those aspects of symmetry and group theory that are directly useful in interpreting molecular structure and spectroscopy. Nevertheless I hope that the reader will begin to sense some of the beauty of the subject. Symmetry is at the heart of our understanding of the physical laws of nature. If a reader is happy with what appears in this book, I must count this a success. But if the book motivates a reader to move deeper into the subject, I shall be grati?ed.

The series Topics in Organometallic Chemistry presents critical overviews of research results in organometallic chemistry. As our understanding of organometallic structure, properties and mechanisms increases, new ways are opened for the design of organometallic compounds and reactions tailored to the needs of such diverse areas as organic synthesis, medical research, biology and materials science. Thus the scope of coverage includes a broad range of topics in pure and applied organometallic chemistry, where new breakthroughs are being achieved that are of significance to a larger scientific audience. The individual volumes of Topics in Organometallic Chemistry are thematic. Review articles are generally invited by the volume editors.

This thesis focuses on the theoretical description of electro-osmosis of polymer solutions. In particular, it emphasizes the importance of considering non-uniform profiles of the solution viscosity and polymer concentration near a solid surface. The thesis begins with an introduction to fundamental theories and experimental observations for beginners in this field, concerning electrolyte solutions, electric double layers, and electrokinetics. In Chapter 2, the author discusses the linear response of electro-osmotic flow with respect to applied electric fields in aqueous polyelectrolyte solutions, and predicts a possibility of flow reversal caused by oppositely charged polyelectrolytes adsorbed on a charged surface. In Chapter 3, the author extends the discussion to non-linear electro-osmotic flow driven by applied electric fields in neutral polymer solutions. The dynamics of polymers are modeled and simulated using Brownian dynamics and kinetic theory. Finally, the thesis is summarized in Chapter 4. The introduction provides a comprehensive review of electrokinetics for graduate students and researchers interested in soft matter physics. An additional attraction is that readers can effectively learn various theoretical approaches to electro-osmosis.

When we see a jumbo jet at the airport, we sometimes wonder how such a huge, heavy plane can fly high in the sky. To the extent that we think in a static way, it is certainly not understandable. In such a manner, dynamics yields behavior quite different from statics. When we want to prepare an iron nitride, for example, one of the most orthodox ways is to put iron in a nitrogen atmosphere under pressures higher than the dissociation pressure of the iron nitride at temperatures sufficiently high to let the nitrogen penetrate into the bulk iron. This is the way thermodynamics tells us to proceed, which requires an elaborate, expensive high-pressure apparatus, sophisticated techniques, and great efforts. However, if we flow ammonia over the iron, even under low pressures, we can easily prepare the nitride-provided the hydrogen pressure is sufficiently low. Since the nitrogen desorption rate is the determining step of the ammonia decomposition on the iron surface, the virtual pressure of nitrogen at the surface can reach an extremely high level (as is generally accepted) because, in such a dynamic system, the driving force of the ammonia decomposition reaction pushes the nitrogen into the bulk iron to form the nitride. Thus, dynamics is an approach considerably different from statics.