Molecular manipulation of nano- and microstructures paves the way to produce organic polymer materials by design. Such architectures comprise both the synthesis and the kinetics and thermodynamics of macromolecular organization and is the theme of this volume. The book consists of four articles reviewing living polymerization to produce precisely defined linear polyesters, comparing them to other living polymerization techniques. The articles also deal with the synthesis of polymeric dendrimers, either by the convergent or divergent approach; block copolymers synthesis, to define micromorphology in high performance polymers; and thereby tailoring their thermal, chemical, mechanical and dielectrical properties, and finally kinetics and thermodynamics for microstructural organization in macroporous thermosets.

The author presents in detail a new non-perturbative approach to the fermionic many-body problem, improving the bosonization technique and generalizing it to dimensions "d">1 via functional integration and Hubbard--Stratonovich transformations. In Part I he clearly illustrates the approximations and limitations inherent in higher-dimensional bosonization and derives the precise relation with diagrammatic perturbation theory. He shows how the non-linear terms in the energy dispersion can be systematically included into bosonization in arbitrary "d," so that in "d">1 the curvature of the Fermi surface can be taken into account. Part II gives applications to problems of physical interest. The book addresses researchers and graduate students in theoretical condensed matter physics.

Epoxy resins are regarded as thermosetting resins and have found various c- mercial applications after crosslinking with adequate curing agents [1-3]. H- ever, some epoxy resins have been used as thermoplastic resins without curing agents. Figure 1 shows the applications of epoxy resins that are classi?ed to three categories: thermosets in combination with curing agents, thermoplastics wi- out curing agents, and raw materials for modi?cation. The use in thermoplastics is not popular compared with the two other applications. Typical thermoplastic applications are found in stabilizers for vinyl resins, toners for copying - chines, ?re retardants for engineering plastics, and sizing material for glass or carbon ?bers. The epoxy resin most frequently used is the oligomer of the diglycidyl ether of bisphenol-A (DGEBA) whose chemical structure is shown below [1-3]. The DGEBA is composed of linear molecules with different molecular weights according to the variation of the repeated number (n) in the structural formula.

-

The problem of moment formation in metallic systems lies at the interface of localized and itinerant magnetism. The phenomena observed correspond to destruction rather than to formation of spin-correlations. They give rise to the progression from local ized ground states through Kondo and mixed-valence behaviour to itinerant magnetic or non-magnetic systems. Somewhere in the pro gression superconductivity can occur in the presence of f-moments. To bring together the disparate ideas and methods, previously the subject of intense debate only at a number of topical confer ences, a two-week Advanced Study Institute was held August 21 - September 02, 1983, at Lester B. Pearson College of the Pacific, Vancouver Island. In the stimulating environment provided by the pines and fiord at the site of this remote United World College on the Canadian West Coast, scientists and students from around the globe gathered to hear lectures by experts. The Study Institute involved seventy-six people and followed in the tradition . of pre vious "Banff" summer schools organized by the Canadian Association of Physicists. It was made possible by grants from the North Atlantic Treaty Organization, the Natural Sciences & Engineering Research Council of Canada and Atomic Energy of Canada. The grants permitted many young scientists from Nato and non-Nato countries to learn the fundamentals as well as the latest results in the field."

This comprehensive series covers the science and technology of zeolites and all related microporous and mesoporous materials. Authored by renowned experts, volume 3 deals with the most widely employed techniques for the post-synthesis modification of molecular sieves.

have advances in of The last few seen our understanding revolutionary years heterostructures. An amount the electronic of enormous properties quantum undertaken both the and the theoretical of research has been on experimental in nanostructures. The field vast of electronic now covers a aspects transport and extensive number of review of an books, articles, spectrum topics, papers and conference continue to be in this area. published Complete proceedings of this and field is the of this book. beyond exciting evolving scope coverage We refer the interested reader to of the excellent and some comprehensive books and conference on this proceedings subject. Much has been made in our of confined understanding quantum progress A's is well it is to construct heterostruc known, possible quantum systems. tures which well as one dimensional are approximated quasi two dimensional, zero dimensional Our interest here is in the of or properties particles systems. We brief andfields in two dimensional a intro quasi (2 D) systems. provide duction to the of 2 D in to motion in 2 D systems, particular systems physics the confined within finite For we will assume that a area. simplicity, generally Such confined is defined an infinite hard wall a by potential. system boundary We will 2 D will be referred to as a or as a wire.

The liquid crystalline state may be identified as a distinct and unique state of matter which is characterised by properties which resemble those of both solids and liquids. It was first recognised in the middle of the last century through the study of nerve myelin and derivatives of cholesterol. The research in the area really gathered momentum, however, when as a result of the pioneering work of Gray in the early 1970's organic compounds exhibiting liquid crystalline properties were shown to be suitable to form the basis of display devices in the electronic products. The study of liquid crystals is truly multidisciplinary and has attached the attention of physicists, biologists, chemists, mathematicians and electronics engineers. It is therefore impossible to cover all these aspects fully in two small volumes and therefore it was decided in view of the overall title of the series to concentrate on the structural and bonding aspects of the subject. The Chapters presented in these two volumes have been organised to cover the following fundamental aspects of the subiect. The calculation of the structures of liquid crystals, an account of their dynamical properties and a discussion of computer simulations of liquid crystalline phases formed by Gay Berne mesogens. The relationships between molecular conformation and packing are analysed in some detail. The crystal structures of liquid crystal mesogens and the importance of their X ray scattering properties for characterisational purposes are discussed.

I welcome the opportunity to have my book translated, because of the great emphasis on two-phase flow and heat transfer in the English-speaking world, as related to research, university education, and industrial practice. The 1988 Springer-Verlag edition of "Warmeiibergang beim Kondensieren und beim Sieden" has been enlarged to include additional material on falling film evaporation (Chapter 12) and pressure drop in two-phase flow (Chapter 13). Minor errors in the original text have also been corrected. I would like to express my sincere appreciation to Professor Green, Asso ciate Professor of German at Rensselaer, for his excellent translation and co operation. My thanks go also to Professor Bergles for his close attention to technical and linguistic details. He carefully read the typescript and made many comments and suggestions that helped to improve the manuscript. I hope that the English edition will meet with' a favorable reception and contribute to better understanding and to progress in the field of heat transfer in condensation and boiling. February 1992 K. Stephan Preface to the German-Language Edition This book is a continuation of the series "Heat and Mass Transfer" edited by U. Grigull, in which three volumes have already been published. Its aim is to acquaint students and practicing engineers with heat transfer during condensa tion and boiling, and is intended primarily for students and engineers in mechanical, chemical, electrical, and industrial processing engineering."

The book aims to give an overview of the previous Sitges Conferences, which have been held during the last 25 years, with special emphasis on topics related to non-equilibrium phenomena. It includes review articles and articles dealing with new trends in the subject, written by scientists who have played an important role in the development of this area. The book is intended as a commemorative edition of the Sitges Conferences. Graduate students of physics and researchers will find this a stimulating account of the development of non-equilibrium statistical mechanics in the last years, covering a wide scope of topics: kinetic theory, hydrodynamics, fluctuation phenomena and stochastic processes, relaxation phenomena, kinetics of phase transitions, growth kinetics, and so on.

This series presents critical reviews of the present and future trends in polymer and biopolymer science including chemistry, physical chemistry, physics and materials science. It is addressed to all scientists at universities and in industry who wish to keep abreast of advances in the topics covered.

Impact Factor Ranking: Always number one in Polymer Science. More information as well as the electronic version of the whole content available at: www.springerlink.com

F.J. Balta-Calleja, A. Gonzalez Arche, T.A. Ezquerra, C. Santa Cruz, F. Batallan, B. Frick, G.A. Arche, E. Lopez Cabarcos, Structure and Properties of Ferroelectric Copolymers of Poly (vinylidene) Fluoride H.G. Kilian, T. Pieper Packing of Chain Segments: A Method for Describing X-Ray Patterns of Crystalline, Liquid Crystalline and Non-Crystalline Polymers K. Miyasaka PVA-Iodine Complexes: Formation, Structure and Properties

While books have been written on many topics of Polymer Science, no compre hensive treatise on long chain branching has ever been composed. This series of reviews in Volume 142 and 143 of Advances in Polymer Science tries to fill this gap by highlighting active areas of research on branched polymers. Long chain branching is a phenomenon observed in synthetic polymers and in some natural polysaccharides. It has long been recognized as a major mole cular parameter of macromolecules. Its presence was first surmised by H. Stau dinger and G. V. Schuh (Ber. 68, 2320, 1935). Interestingly, their method of iden tification by means of the abnormal relation between intrinsic viscosity and molecular weight has survived to this day. Indeed, the most sophisticated method for analysis of long chain branching uses size exclusion fractionation with the simultaneous recording of mass, molecular weight and intrinsic visco sity of the fractions. In the 1940s and 1950s, random branching in polymers and its effect on their properties was studied by Stockmayer, Flory, Zimm and many others. Their work remains a milestone on the subject to this day. Flory dedicated several chapters of his "Principles of Polymer Chemistry" to non linear polymers. Especially important at that time was the view that randomly branched polymers are inter mediates to polymeric networks. Further developments in randomly branched polymers came from the introduction of percolation theory. The modern aspec ts of this topic are elaborated here in the chapter by W. Burchard.

The aesthetically pleasing molecular architectures of fullerenes and nanotubes are appealing not only because of their beauty but also because they are responsible for the many unprecedented chemical and physical properties of this compound class. Although succession of exciting new discoveries continues unabated fullerene research has become a mature science. It is now possible to predict fullerene chemistry, to design new structure variations like open fullerene clusters, heterofullerenes and endohedral fullerenes, and to develop fullerene materials and modified nanotubes with high potential for technological applications. This volume represents the state-of-the-art of fullerene research, focussing on areas showing high potential for future growth and practical applications. The authors are leading scientists whose groups are making major contributions in the field.

The two volumes "New Developments in Polymer Analytics" deal with recent progress in the characterization of polymers, mostly in solution but also at s- faces. Despite the fact that almost all of the described techniques are getting on in years, the contributions are expected to meet the readers interest because either the methods are newly applied to polymers or the instrumentation has achieved a major breakthrough leading to an enhanced utilizaton by polymer scientists. The first volume concentrates on separation techniques. H. Pasch summarizes the recent successes of multi-dimensional chromatography in the characteri- tion of copolymers. Both, chain length distribution and the compositional h- erogeneity of copolymers are accessible. Capillary electrophoresis is widely and successfully utilized for the characterization of biopolymers, particular of DNA. It is only recently that the technique has been applied to the characterization of water soluble synthetic macromolecules. This contributrion of Grosche and Engelhardt focuses on the analysis of polyelectrolytes by capillary electopho- sis. The last contribution of the first volume by Coelfen and Antonietti sum- rizes the achievements and pitfalls of field flow fractionation techniques. The major drawbacks in the instrumentation have been overcome in recent years and the"triple F techniques" are currently advancing to a powerful competitor to size exclusion chromatography.

Over the past four decades polymers containing imide groups (usually as build ing blocks of the polymer backbone) have attracted increasing interest of sci entists engaged in fundamental research as well as that of companies looking into their application and commercialization. This situation will apparently continue in the future and justifies that from time to time reviews be published which sum up the current state of knowledge in this field. Imide groups may impart a variety of useful properties to pol~'mers, e. g. , thermal stability chain stiffness, crystallinity, mesogenic properties, photoreactivity etc. These lead to a broad variety of potential applications. This broad and somewhat heteroge neous field is difficult to cover in one single review or monograph. A rather com prehensive monograph was edited four years ago by K. Mittal, mainly concen trating on procedures and properties of technical interest. Most reviews presented in this volume of Advances in Polymer Science focus on fundamen tal research and touch topics not intensively discussed in the monograph by K. Mittal. Therefore, the editor of this work hopes that the reader will appreci ate finding complementary information. Finally I wish to thank all the contributors who made this work possible and I would like to thank Dr. Gert Schwarz for the revision of the manuscripts of the contributions 3 and 4. Hamburg, September 1998 Hans R. Kricheldorf Contents Nanoporous Polyimides J. L. Hedrick, K. R. Carter, l. W. Labadie, R. D. Miller, W.

This Cumulative Index of Structure Reports contains all the structures for the years 1913-1980 (Volumes 1 to 46B) and the authors for the latest 10-year period, 1971- 1980 (Volumes 37B to 46B). The arrangement in the classified structure index is as outlined on pages VII-VIII. University of Guelph, G. FERGUSON Guelph, Ontario, Canada [VI] VII ARRANGEMENT Classified Organic Index (Page 1) Each entry gives the formula, name, and Strukturbericht and Structure Reports references. The entries are arranged in accordance with the classification scheme based on chemical structure of the Cambridge Crystallographic Data Centre; within each class the order is by formula. The formula index will help to locate a compound for which the classification is doubtful. The classification is: (0) Aliphatic hydrocarbons and derivatives 1 Aliphatic carboxylic acid derivatives 2 Aliphatic carboxylic acid salts (&JmOnium, IA, IIA . . tals) 3 Aliphatic lllllines 4 Aliphatic (N and S) COIIIJ>OWids 7 Nitriles (aliphatic and aroutic) 8 Urea compounds (aliphatic and aromatic) 9 Nitrogen-nitrogen c0111pounds (aliphatic and aromatic) 10 Nitrogen-oxygen compoWids (aliphatic and aroutic) 11 Sulphur and selenium COIIIpounds 12 Carbonium ions, carbanions, radicals 13 Benz.

-

The IUTAM Symposium on Mechanical and Electromagnetic Waves in Structured Media took place at the University of Sydney from January 18- 22, 1999. It brought together leading researchers from eleven countries for a week-long meeting, with the aim of providing cross-links between the com- nities studying related problems involving elastic and electromagnetic waves in structured materials. After the meeting, participants were invited to submit articles based on their presentations, which were refereed and assembled to constitute these Proceedings. The topics covered here represent areas at the forefront of research intoelastic and electromagnetic waves. They include effect of nonlinearity, diffusion and multiple scattering on waves, as well as asymptotic and numerical techniques. Composite materials are discussed in depth, with example systems ranging fromdusty plasmas to a magneto-elastic microstructured system. Also included are studies of homogenisation, that field which seeks to determine equivalent homogeneous systems which can give equivalent wave properties to structured materials, and inverse problems, in which waves are used as a probe to infer structural details concerning scattering systems. There are also strong groups of papers on the localization of waves by random systems, and photonic and phononic band gap materials. These are being developed by analogue with semiconductors for electrons, and hold out the promise of enabling designers to control the propagation of waves through materials in novel ways. We would like to thank the other members of the Scientific Committee (A.

This volume includes 58 contributions to the 11th International Conference on Surface and Colloid Science, a highly successful conference sponsored by the International Association of Colloid and Interface Scientists and held in Iguassu Falls, Brazil, in September 2003. Topics covered are the following: Biocolloids and Biological Applications, Charged Particles and Interfaces, Colloid Stability, Colloidal Dispersions, Environmental Colloidal Science, Interfaces and Adsorption, Nanostructures and Nanotechnology, Self-Assembly and Structured Fluids, Surfactants and Polymers, Technology and Applications, Colloids and Surfaces in Oil Production. Surface and colloid science has acquired great momentum during the past twenty years and this volume is a good display of new results and new directions in this important area.

This book presents the most comprehensive analysis of bonding in polyoxometalates and related oxides based on classical bonding concepts and the bond valence model. Numerous tables and figures underline and illuminate the results, making it a valuable resource.

Toyiochi Tanaka, Mitsuhiro Shibayama, "Phase Transitions and related Phenomena of Polymer Gels", Akira Onuki "Theory of Phase Transition in Polymer Gels", Alexei Khokhlov, Sergei Starodybtzev, Valentina Vasilevskaya "Conformational Transitions in Polymer Gels: Theory and Experiment", Michal Ilavsky " Effect on Phase Transition on Swellingand Mechanical Behavior of Synthetic Hydrogels", Shozaburo Saito , M. Konno, H. Inomata "Volume Phase Transition of N-Alkylacrylamide Gels", Ronald Siegel "Hydrophobic Weak Polyelectrolyte Gels: Studies of Swelling Equilibria and Kinetics".