This book reviews the HL-LHC experiments and the fourth-generation photon science experiments, discussing the latest radiation hardening techniques, optimization of device & process parameters using TCAD simulation tools, and the experimental characterization required to develop rad-hard Si detectors for x-ray induced surface damage and bulk damage by hadronic irradiation. Consisting of eleven chapters, it introduces various types of strip and pixel detector designs for the current upgrade, radiation, and dynamic range requirement of the experiments, and presents an overview of radiation detectors, especially Si detectors. It also describes the design of pixel detectors, experiments and characterization of Si detectors. The book is intended for researchers and master's level students with an understanding of radiation detector physics. It provides a concept that uses TCAD simulation to optimize the electrical performance of the devices used in the harsh radiation environment of the colliders and at XFEL.

This volume presents an in-depth review of experimental and theoretical studies on the newly discovered Fe-based superconductors. Following the Introduction, which places iron-based superconductors in the context of other unconventional superconductors, the book is divided into three sections covering sample growth, experimental characterization, and theoretical understanding. To understand the complex structure-property relationships of these materials, results from a wide range of experimental techniques and theoretical approaches are described that probe the electronic and magnetic properties and offer insight into either itinerant or localized electronic states. The extensive reference lists provide a bridge to further reading. Iron-Based Superconductivity is essential reading for advanced undergraduate and graduate students as well as researchers active in the fields of condensed matter physics and materials science in general, particularly those with an interest in correlated metals, frustrated spin systems, superconductivity, and competing orders.

This book is written for scientists involved in the calibration of viscometers. A detailed description for stepping up procedures to establish the viscosity scale and obtaining sets of master viscometers is given in the book. Uncertainty considerations for standard oils of known viscosity are presented. The modern viscometers based on principles oftuning fork, ultrasonic, PZT, plate waves, Love waves, micro-cantilever and vibration of optical fiber are discussed to inspire the reader to further research and to generate improved versions. The primary standard for viscosity is pure water. Measurements of its viscosity with accuracy/uncertainty achieved are described. The principles of rotational and oscillation viscometers are explained to enhance the knowledge in calibration work. Devices used for specific materials and viscosity in non SI units are discussed with respect to the need to correlate viscosity values obtained by various devices. The description of commercial viscometers meets the needs of the user."

This book emphasises both experimental and theoretical aspects of surface, interface and thin-film physics. As in previous editions the preparation of surfaces and thin films, their atomic and morphological structure, their vibronic and electronic properties as well as fundamentals of adsorption are treated. Because of their importance in modern information technology and nanostructure research, particular emphasis is paid to electronic surface and interface states, semiconductor space charge layers and heterostructures. A special chapter of the book is devoted to collective phenomena at interfaces and in thin films such as superconductivity and magnetism. The latter topic includes the meanwhile important issues giant magnetoresistance and spin-transfer torque mechanism, both effects being of high interest in information technology. In this new edition, for the first time, the effect of spin-orbit coupling on surface states is treated. In this context the class of the recently detected topological insulators, materials of significant importance for spin electronics, are discussed. Particular emphasis, hereby, is laid on the new type of topologically protected surface states with well-defined spin orientation. Furthermore, some important well established experimental techniques such as X-ray diffraction (XRD) and reflection anisotropy spectroscopy (RAS), which were missing so far in earlier editions, were added in this new 6th edition of the book.

The book presents twelve state of the art contributions in the field of numerical modeling of materials subjected to large strain, high strain rates, large pressure and high stress triaxialities, organized into two sections. The first part is focused on high strain rate-high pressures such as those occurring in impact dynamics and shock compression related phenomena, dealing with material response identification, advanced modeling incorporating microstructure and damage, stress waves propagation in solids and structures response under impact. The latter part is focused on large strain-low strain rates applications such as those occurring in technological material processing, dealing with microstructure and texture evolution, material response at elevated temperatures, structural behavior under large strain and multi axial state of stress.

Research for the development of more efficient photocatalysts has experienced an almost exponential growth since its popularization in early 1970 s. Despite the advantages of the widely used TiO2, the yield of the conversion of sun power into chemical energy that can be achieved with this material is limited" "prompting the research and development of a number of structural, morphological and chemical modifications of TiO2, as well as a number of novel photocatalysts with very different composition." Design of Advanced Photocatalytic Materials for Energy and Environmental Applications" provides a systematic account of the current understanding of the relationships between the physicochemical properties of the catalysts and photoactivity.

The already long list of photocatalysts phases and their modifications is increasing day by day. By approaching this field from a material sciences angle, an integrated view allows readers to consider the diversity of photocatalysts globally and in connection with other technologies. "Design of Advanced Photocatalytic Materials for Energy and Environmental Applications" provides a valuable road-map, outlining the common principles lying behind the diversity of materials, but also delimiting the imprecise border between the contrasted results and the most speculative studies. This broad approach makes it ideal for specialist but also for engineers, researchers and students in related fields.

This book brings together numerous contributions to the field of magnetoelectric (ME) composites that have been reported so far. Theoretical models of ME coupling in composites relate to the wide frequency range: from low-frequency to microwave ones and are based on simultaneous solving the elastostatic/elastodynamic and electrodynamics equations. Suggested models enable one to optimize magnetoelectric parameters of a composite. The authors hope to provide some assimilation of facts into establish knowledge for readers new to the field, so that the potential of the field can be made transparent to new generations of talent to advance the subject matter.

This book provides an overview of the application of IR spectroscopy in mineralogical investigations, as well as modern trends in the IR spectroscopy of minerals. It includes the most important methodological aspects; characteristic IR bands of different chemical groups and coordination polyhedra; application of IR spectroscopy to the investigation of the crystal chemistry of amphiboles, phyllosilicates, tourmalines etc.; neutral molecules entrapped by microporous minerals; and analysis of hydrogen in nominally anhydrous minerals. About 1600 IR spectra (illustrations as well as a list of wavenumbers) of minerals and some related compounds are accompanied by detailed descriptions of the standard samples used. Each spectrum provides information about the occurrence, appearance, associated minerals, its empirical formula, and unit-cell parameters. The book also provides insights into sample preparation and/or spectrum registration methods. It includes IR spectra of 1020 minerals that were not covered in the book "Infrared spectra of mineral species: Extended library" published in 2014 and written by one of the authors. On average, each page provides information on two minerals/compounds. Subsections correspond to different classes of compounds (silicates, phosphates, arsenates, oxides etc.). About 290 new spectra have been obtained, and the remaining 1310 spectra are taken from most reliable literature sources (published over the last 60 years) and are redrawn in a unified style.

Using an in situ transmission electron microscopy (TEM) approach to investigate the growth mechanism of carbon nanotubes (CNTs) as well as the fabrication and properties of CNT-clamped metal atomic chains (MACs) is the focus of the research summarized in this thesis. The application of an in situ TEM approach in the above-mentioned research provides not only real-time observation but also monitored machining and structural evolvement at the atomic level. In this thesis, the author introduces a CNT tubular nano furnace that can be operated under TEM for investigation of the CNT nucleation mechanism. By studying the nucleation process of CNTs in the presence of various catalysts, including iron-based metallic catalysts and silicon oxide-based non-metallic catalysts, the physical states of the catalysts as well as the nucleation and growth process of CNTs are revealed. Based on the understanding of the nucleation mechanism, the author proposes a hetero-epitaxial growth strategy of CNTs from boron nitride, which provides a new route for the controllable growth of CNTs. In addition, the author presents an electron beam-assisted nanomachining technique and the fabrication of a CNT-clamped MAC prototype device based on this technique. The formation process of CNT-clamped Fe atomic chains (ACs) can be monitored with atomic resolution. The demonstrated quantized conductance and uninfluenced half-metallic properties of Fe ACs indicate that CNTs can be promising nanoscale electrodes or interconnectors for the linking and assembly of nano and subnano structures.

Proceedings of the 3rd Joint International Conference on Hyperfine Interactions and International Symposium on Nuclear Quadrupole Interactions, HFI/NQI 2010 held at CERN, Switzerland, September 13-17, 2010 Reprinted from Hyperfine Interactions Volume. This volume focuses on the most recent studies on all aspects of hyperfine interaction detected by nuclear radiation and nuclear quadrupole interactions detected by resonance methods in the areas of materials, biological and medical science, as well as on contributions on new developments in instrumentation and methods, ab initio calculations and simulations. This volume comprises research papers, reviews, and short communications recording original investigations related to: Theory on Hyperfine Interactions (HFI) and Nuclear Moments; Magnetism and Magnetic Materials (Bulk and Thin Layers); HFI probes in Semiconductors, Metals and Insulators; Lattice Dynamics and Ion-Solid Interactions; Surfaces, Interfaces, Thin Films, and Nano-structures; Resonance Methods; Nuclear Moments, Nuclear Polarization and Spin Dynamics; Investigations in Biology, Chemistry, and Medicine; New Directions and Developments in Methodology. The papers present the latest scientific work of various invited speakers and contributor researchers from the five continents that have brought their perspectives to the meeting.

This book, "Heat and Mass Transfer in Porous Media," presents a set of new developments in the field of basic and applied research work on the physical and chemical aspects of heat and mass transfer phenomena in a porous medium domain, as well as related material properties and their measurements. The book contents include both theoretical and experimental developments, providing a self-contained major reference that is appealing to both the scientists and the engineers. At the same time, these topics will encounter of a variety of scientific and engineering disciplines, such as chemical, civil, agricultural, mechanical engineering, etc. The book is divided in several chapters that intend to be a short monograph in which the authors summarize the current state of knowledge for benefit of professionals.

The importance of surface metrology has long been acknowledged in manufacturing and mechanical engineering, but has now gained growing recognition in an expanding number of new applications in fields such as semiconductors, electronics and optics. Metrology is the scientific study of measurement, and surface metrology is the study of the measurement of rough surfaces. In this book, Professor David Whitehouse, an internationally acknowledged subject expert, covers the wide range of theory and practice, including the use of new methods of instrumentation.
- Written by one of the world's leading metrologists
- Covers electronics and optics applications as well as mechanical
- Written for mechanical and manufacturing engineers, tribologists and precision engineers in industry and academia

This book deals with the properties and behavior of carbon at high temperatures. It presents new methods and new ways to obtain the liquid phase of carbon. Melting of graphite and the properties of liquid carbon are presented under stationary heat and pulse methods. Metal like properties of molten graphite at high initial density are indicated. A new possible transition of liquid carbon from metal to nonmetal behavior much above the melting point is mentioned. Methodical questions of pulse heating, in particular the role of pinch-pressure in receiving a liquid state of carbon, are discussed. The reader finds evidence about the necessity of applying high pressure (higher than 100 bar) to melt graphite (melting temperature 4800+/-100 K). The reader can verify the advantage of volume pulse electrical heating before surface laser heating to study the physical properties of carbon, including enthalpy, heat capacity, electrical resistivity and temperature. The advantages of fast heating of graphite by pulsed electric current during a few microseconds are shown. The data obtained for the heat capacity of liquid carbon under constant pressure and constant volume were used to estimate the behavior at temperatures much higher 5000 K.

Proceedings of the 31st International Conference on the Applications of the Mossbauer Effect (ICAME 2011) held in Kobe, Japan, September 25-30, 2011
Y. Yoshida (Ed)
Professor Rudolf L. Mossbauer passed away just before this conference on 14 September 2011. At the Opening Ceremony by Denes Nagy, Chairperson of IBAME, with Yutaka Yoshida, Chairperson of the Organizing Committee, dedicated the conference to the memory of Professor Mossbauer. This volume focuses on the most recent studies on the materials research for the global environment among the usual topics which have been discussed in this long-standing conference series: Advances in Experimental techniques and Methodology, Theories of Hyperfine Interaction, Dynamics, Biological and Medical Application, Chemical Applications, Nanomaterials, Solid State Physic, Earth Science, Mineralogy and Archaeology, Materials Science and Industrial Applications. Prof. W. Keune gave us a keynote lecture on the applications of Mossbauer Spectroscopy in Magnetism. There were both a special session on the Database and the hot topics session on Iron based superconductors. Prof. S. Campbell made concluding remarks. The special papers presented by Profs. C.E. Johnson, I. Nowick, G. Vogl, J.M. Genin, F. E. Wagner, and J. Stevens in Evening session are also included in this volume.

Reprint from Hyperfine Interactions"

This book explains concepts of transmission electron microscopy (TEM) and x-ray diffractometry (XRD) that are important for the characterization of materials. The fourth edition adds important new techniques of TEM such as electron tomography, nanobeam diffraction, and geometric phase analysis. A new chapter on neutron scattering completes the trio of x-ray, electron and neutron diffraction. All chapters were updated and revised for clarity. The book explains the fundamentals of how waves and wavefunctions interact with atoms in solids, and the similarities and differences of using x-rays, electrons, or neutrons for diffraction measurements. Diffraction effects of crystalline order, defects, and disorder in materials are explained in detail. Both practical and theoretical issues are covered. The book can be used in an introductory-level or advanced-level course, since sections are identified by difficulty. Each chapter includes a set of problems to illustrate principles, and the extensive Appendix includes laboratory exercises.

The second edition of Gesser's classic Applied Chemistry includes updated versions of the original 16 chapters plus two new chapters on semiconductors and nanotechnology. This textbook introduces chemistry students to the applications of their field to engineering design and function across a wide range of subjects, from fuels and polymers to electrochemistry and water treatment. Each chapter concludes with a reading list of relevant books and articles as well as a set of exercises which include problems that extend the topics beyond the text. Other supplements to the text include a laboratory section with step-by-step experiments and a solutions manual for instructors.

The purpose of this book, Transport Phenomena and Drying of Solids and Particulate Materials, is to provide a collection of recent contributions in the field of heat and mass transfer, transport phenomena, drying and wetting of solids and particulate materials. The main benefit of the book is that it discusses some of the most important topics related to the heat and mass transfer in solids and particulate materials. It includes a set of new developments in the field of basic and applied research work on the physical and chemical aspects of heat and mass transfer phenomena, drying and wetting processes, namely, innovations and trends in drying science and technology, drying mechanism and theory, equipment, advanced modelling, complex simulation and experimentation. At the same time, these topics will be going to the encounter of a variety of scientific and engineering disciplines. The book is divided in several chapters that intend to be a resume of the current state of knowledge for benefit of professional colleagues.

This book presents the theory of continuum mechanics for mechanical, thermodynamical, and electrodynamical systems. It shows how to obtain governing equations and it applies them by computing the reality. It uses only open-source codes developed under the FEniCS project and includes codes for 20 engineering applications from mechanics, fluid dynamics, applied thermodynamics, and electromagnetism. Moreover, it derives and utilizes the constitutive equations including coupling terms, which allow to compute multiphysics problems by incorporating interactions between primitive variables, namely, motion, temperature, and electromagnetic fields. An engineering system is described by the primitive variables satisfying field equations that are partial differential equations in space and time. The field equations are mostly coupled and nonlinear, in other words, difficult to solve. In order to solve the coupled, nonlinear system of partial differential equations, the book uses a novel collection of open-source packages developed under the FEniCS project. All primitive variables are solved at once in a fully coupled fashion by using finite difference method in time and finite element method in space.

The goal of this book is to provide a general overview of the rapidly developing field of novel scanning probe microscopy (SPM) techniques for characterization of a wide range of functional materials, including complex oxides, biopolymers, and semiconductors. Many recent advances in condensed matter physics and materials science, including transport mechanisms in carbon nanostructures and the role of disorder on high temperature superconductivity, would have been impossible without SPM. The unique aspect of SPM is its potential for imaging functional properties of materials as opposed to structural characterization by electron microscopy. Examples include electrical transport and magnetic, optical, and electromechanical properties. By bringing together critical reviews by leading researchers on the application of SPM to to the nanoscale characterization of functional materials properties, this book provides insight into fundamental and technological advances and future trends in key areas of nanoscience and nanotechnology.

This book presents highlighted results coming up from NanoCarbon2011, a Brazilian Carbon event. The topics cover the latest advances in Brazilian basic and applied research related to different carbon materials. The chapters address reviews on their fundamental and outstanding properties and describe various classes of new promising high-tech applications for carbon materials.

* Metivier is an expert in the field of pdes/math physics, with a particular emphasis on shock waves.

* New monograph focuses on mathematical methods, models, and applications of boundary layers, present in many problems of physics, engineering, fluid mechanics.

* Metivier has good Birkhauser track record: one of the main authors of "Advances in the Theory of Shock Waves" (Freistuehler/Szepessy, eds, 4187-4).

* Manuscript endorsed by N. Bellomo, MSSET series editor...should be a good sell to members of MSSET community, who by-in-large are based in Europe.

* Included are self-contained introductions to different topics such as hyperbolic boundary value problems, parabolic systems, WKB methods, construction of profiles, introduction to the theory of Evans' functions, and energy methods with Kreiss' symmetrizers.

This book presents contributions on the current problems in a number of topical areas of nonlinear dynamics and physics, written by experts from Russia, Ukraine, Israel, Germany, Poland, Italy, the Netherlands, the USA, and France. The book is dedicated to Professor Leonid I. Manevitch, an outstanding scholar in the fields of Mechanics of Solids, Nonlinear Dynamics, and Polymer Physics, on the occasion of his 80th birthday.

The behavior of nanoscale materials can change rapidly with time either because the environment changes rapidly or because the influence of the environment propagates quickly across the intrinsically small dimensions of nanoscale materials. Extremely fast time resolution studies using X-rays, electrons and neutrons are of very high interest to many researchers and is a fast-evolving and interesting field for the study of dynamic processes. Therefore, in situ structural characterization and measurements of structure-property relationships covering several decades of length and time scales (from atoms to millimeters and femtoseconds to hours) with high spatial and temporal resolutions are crucially important to understand the synthesis and behavior of multidimensional materials. The techniques described in this book will permit access to the real-time dynamics of materials, surface processes and chemical and biological reactions at various time scales. This book provides an interdisciplinary reference for research using in situ techniques to capture the real-time structural and property responses of materials to surrounding fields using electron, optical and x-ray microscopies (e.g. scanning, transmission and low-energy electron microscopy and scanning probe microscopy) or in the scattering realm with x-ray, neutron and electron diffraction.

From Charpy to Present Impact Testing contains 52 peer-reviewed papers selected from those presented at the Charpy Centenary Conference held in Poitiers, France, 2-5 October 2001.

The name of Charpy remains associated with impact testing on notched specimens. At a time when many steam engines exploded, engineers were preoccupied with studying the resistance of steels to impact loading.

The Charpy test has provided invaluable indications on the impact properties of materials. It revealed the brittle ductile transition of ferritic steels.

The Charpy test is able to provide more quantitative results by instrumenting the striker, which allows the evolution of the applied load during the impact to be determined. The Charpy test is of great importance to evaluate the embrittlement of steels by irradiation in nuclear reactors. Progress in computer programming has allowed for a computer model of the test to be developed; a difficult task in view of its dynamic, three dimensional, adiabatic nature. Together with precise observations of the processes of fracture, this opens the possibility of transferring quantitatively the results of Charpy tests to real components. This test has also been extended to materials other than steels, and is also frequently used to test polymeric materials.

Thus the Charpy test is a tool of great importance and is still at the root of a number of investigations; this is the reason why it was felt that the centenary of the Charpy test had to be celebrated. The Societe Francaise de Metallurgie et de Materiaux decided to organise an international conference which was put under the auspices of the European Society for the Integrity of Structures (ESIS).

This Charpy Centenary Conference (CCC 2001) was held in Poitiers, at Futuroscope in October 2001. More than 150 participants from 17 countries took part in the discussions and about one hundred presentations were given. An exhibition of equipment showed, not only present day testing machines, but also one of the first Charpy pendulums, brought all the way from Imperial College in London.

From Charpy to Present Impact Testing puts together a number of significant contributions. They are classified into 6 headings:

Keynote lectures,
Micromechanisms,
Polymers,
Testing procedures,
Applications,
Modelling.

"

This book presents and introduces ellipsometry in nanoscience and nanotechnology making a bridge between the classical and nanoscale optical behaviour of materials. It delineates the role of the non-destructive and non-invasive optical diagnostics of ellipsometry in improving science and technology of nanomaterials and related processes by illustrating its exploitation, ranging from fundamental studies of the physics and chemistry of nanostructures to the ultimate goal of turnkey manufacturing control. This book is written for a broad readership: materials scientists, researchers, engineers, as well as students and nanotechnology operators who want to deepen their knowledge about both basics and applications of ellipsometry to nanoscale phenomena. It starts as a general introduction for people curious to enter the fields of ellipsometry and polarimetry applied to nanomaterials and progresses to articles by experts on specific fields that span from plasmonics, optics, to semiconductors and flexible electronics. The core belief reflected in this book is that ellipsometry applied at the nanoscale offers new ways of addressing many current needs. The book also explores forward-looking potential applications.