This book is a manual of measurement of colloids and interfaces designed especially for new researchers who have just begun research on these topics. The book is written by active researchers in the field of colloids and interfacial chemistry, based on the practical experience of the authors. In each chapter, the key points of measurement, how to analyze data correctly, points to be careful about, and merits of a particular method are concisely explained from the point of view of the readers. Not only in industries such as cosmetics and pharmaceuticals but also in academic studies of nanotechnology, correct understanding of colloid and interface phenomena is vital because the properties of these items, however small, are affected by the nature of interfaces. This book will be particularly useful for researchers who are not yet fully confident of the measurement techniques that are clearly explained here.

This book presents a modern and unconventional introduction to anisotropy. The first part presents a general description of Anisotropic Elasticity theories while the second part focuses on the polar formalism: the theoretical bases and results are completely developed along with applications to design problems of laminated anisotropic structures. The book is based on lectures on anisotropy which have been held at Ecole Polytechnique in Paris.

This book describes thermoelastic and inelastic deformation processes in crystalline solids undergoing loading by shock compression. Constitutive models with a basis in geometrically nonlinear continuum mechanics supply these descriptions. Large deformations such as finite strains and rotations, are addressed. The book covers dominant mechanisms of nonlinear thermoelasticity, dislocation plasticity, deformation twinning, fracture, flow, and other structure changes. Rigorous derivations of theoretical results are provided, with approximately 1300 numbered equations and an extensive bibliography of over 500 historical and modern references spanning from the 1920s to the present day. Case studies contain property data, as well as analytical, and numerical solutions to shock compression problems for different materials. Such materials are metals, ceramics, and minerals, single crystalline and polycrystalline. The intended audience of this book is practicing scientists (physicists, engineers, materials scientists, and applied mathematicians) involved in advanced research on shock compression of solid materials.

The book is devoted to the problem of microgeometry properties and anisotropy relations in modern piezo-active composites. These materials are characterized by various electromechanical properties and remarkable abilities to convert mechanical energy into electric energy and vice versa. Advantages of the performance of the composites are discussed in the context of the orientation effects, first studied by the authors for main connectivity patterns and with due regard to a large anisotropy of effective piezoelectric coefficients and electromechanical coupling factors. The novelty of the book consists in the systematization results of orientation effects, the anisotropy of piezoelectric properties and their role in forming considerable hydrostatic piezoelectric coefficients, electromechanical coupling factors and other parameters in the composites based on either ferroelectric ceramic or relaxor-ferroelectric single crystals.

The book is about calorimetry and thermal analysis methods, alone or linked to other techniques, as applied to the characterization of catalysts, supports and adsorbents, and to the study of catalytic reactions in various domains: air and wastewater treatment, clean and renewable energies, refining of hydrocarbons, green chemistry, hydrogen production and storage. The book is intended to fill the gap between the basic thermodynamic and kinetics concepts acquired by students during their academic formation, and the use of experimental techniques such as thermal analysis and calorimetry to answer practical questions. Moreover, it supplies insights into the various thermal and calorimetric methods which can be employed in studies aimed at characterizing the physico-chemical properties of solid adsorbents, supports and catalysts, and the processes related to the adsorption desorption phenomena of the reactants and/or products of catalytic reactions. The book also covers the basic concepts for physico-chemical comprehension of the relevant phenomena. Thermodynamic and kinetic aspects of the catalytic reactions can be fruitfully investigated by means of thermal analysis and calorimetric methods, in order to better understand the sequence of the elemental steps in the catalysed reaction. So the fundamental theory behind the various thermal analysis and calorimetric techniques and methods also are illustrated.

This book is an introduction to automotive engineering, to give freshmen ideas about this technology. The text is subdivided in parts that cover all facets of the automobile, including legal and economic aspects related to industry and products, product configuration and fabrication processes, historic evolution and future developments.

The first part describes how motor vehicles were invented and evolved into the present product in more than 100 years of development. The purpose is not only to supply an historical perspective, but also to introduce and discuss the many solutions that were applied (and could be applied again) to solve the same basic problems of vehicle engineering. This part also briefly describes the evolution of automotive technologies and market, including production and development processes.

The second part deals with the description and function analysis of all car subsystems, such as:

. vehicle body,

. chassis, including wheels, suspensions, brakes and steering mechanisms,

. diesel and gasoline engines,

. electric motors, batteries, fuel cells, hybrid propulsion systems,

. driveline, including manual and automatic gearboxes.

This part addresses also many non-technical issues that influence vehicle design and production, such as social and economic impact of vehicles, market, regulations, particularly on pollution and safety.

In spite of the difficulty in forecasting the paths that will be taken by automotive technology, the third part tries to open a window on the future. It is not meant to make predictions that are likely to be wrong, but to discuss the trends of automotive research and innovation and to see the possible paths that may be taken to solve the many problems that are at present open or we can expect for the future.

The book is completed by two appendices about the contribution of computers in designing cars, particularly the car body and outlining fundamentals of vehicle mechanics, including aerodynamics, longitudinal (acceleration and braking) and transversal (path control) motion.

The Laser world consists basically of two areas, which are necessary and in many cases also sufficient for effective innovation: The right laser for the right application. For the individual application that means the determination of optimized process parameters in terms of laser power, peak power/ intensity, focus geometry and dimension, pulse length, pulse repetition rate and wavelength to name only the six most important ones. Once these parameters are identified, the corresponding Laser has to be selected on the basis of commercial availability. Obviously there is no such thing than "One Laser for all." The situation is rather comparable with electrical power, were depending on the demand of the application in terms of voltage, current and time corresponding power supplies need to be tailored, however, with the difference that in the case of the Laser the variety of parameters is even higher, thus the technology is more complex but on the other hand much more flexible in terms optimizing the source to the application.As a consequence it is suggested to generate two volumes on Lasers and Applications named "Tailored Light."

Micromechanisms of Fracture and Fatigue forms the culmination of 20 years of research in the field of fatigue and fracture. It discusses a range of topics and comments on the state of the art for each. The first part is devoted to models of deformation and fracture of perfect crystals. Using various atomistic methods, the theoretical strength of solids under simple and complex loading is calculated for a wide range of elements and compounds, and compared with experimental data. The connection between the onset of local plasticity in nanoindentation tests and the ideal shear strength is analysed using a multi-scale approach. Moreover, the nature of intrinsic brittleness or ductility of perfect crystal lattices is demonstrated by the coupling of atomistic and mesoscopic approaches, and compared with brittle/ductile behaviour of engineering materials. The second part addresses extrinsic sources of fracture toughness of engineering materials, related to their microstructure and microstructurally-induced crack tortuosity. Micromechanisms of ductile fracture are also described, in relation to the fracture strain of materials. Results of multilevel modelling, including statistical aspects of microstructure, are used to explain remarkable phenomena discovered in experiments. In the third part of the book, basic micromechanisms of fatigue cracks propagation under uniaxial and multiaxial loading are discussed on the basis of the unified mesoscopic model of crack tip shielding and closure, taking both microstructure and statistical effects into account. Applications to failure analysis are also outlined, and an attempt is made to distinguish intrinsic and extrinsic sources of materials resistance to fracture. Micromechanisms of Fracture and Fatigue provides scientists, researchers and postgraduate students with not only a deep insight into basic micromechanisms of fracture behaviour of materials, but also a number of engineering applications.

Analytical chemists and materials scientists will find this a useful addition to their armory. The contributors have sought to highlight the present state of affairs in the validation and quality assurance of fluorescence measurements, as well as the need for future standards. Methods included range from steady-state fluorometry and microfluorometry, microscopy, and micro-array technology, to time-resolved fluorescence and fluorescence depolarization imaging techniques.

This book gives a brief but thorough introduction to the fascinating subject of non-Newtonian fluids, their behavior and mechanical properties. After a brief introduction of what characterizes non-Newtonian fluids in Chapter 1 some phenomena characteristic of non-Newtonian fluids are presented in Chapter 2. The basic equations in fluid mechanics are discussed in Chapter 3. Deformation kinematics, the kinematics of shear flows, viscometric flows, and extensional flows are the topics in Chapter 4. Material functions characterizing the behavior of fluids in special flows are defined in Chapter 5. Generalized Newtonian fluids are the most common types of non-Newtonian fluids and are the subject in Chapter 6. Some linearly viscoelastic fluid models are presented in Chapter 7. In Chapter 8 the concept of tensors is utilized and advanced fluid models are introduced. The book is concluded with a variety of 26 problems. Solutions to the problems are ready for instructors

Electrochemistry plays an important role in preserving our cultural heritage. For the first time this has been documented in the present volume. Coverage includes both electrochemical processes such as corrosion and electroanalytical techniques allowing to analyse micro- and nanosamples from works of art or archaeological finds. While this volume is primarily aimed at electrochemists and analytical chemists, it also contains relevant information for conservators, restorers, and archaeologists.

The book drawing on the author's nearly half a century of energetic materials research experience intends to systematically review the global researches on liquid explosives. The book focuses on the study of the conception, explosion mechanism, properties and preparation of liquid explosives. It provides a combination of theoretical knowledge and practical examples in a reader-friendly style. The book is likely to be interest of university researchers and graduate students in the fields of energetic materials, blasting engineering and mining.

This book covers the topic of vibration energy harvesting using piezoelectric materials. Piezoelectric materials are analyzed in the context of their electromechanical coupling, heterogeneity, microgeometry and interrelations between electromechanical properties. Piezoelectric ceramics and composites based on ferroelectrics are advanced materials that are suitable for harvesting mechanical energy from vibrations using inertial energy harvesting which relies on the resistance of a mass to acceleration and kinematic energy harvesting which couples the energy harvester to the relative movement of different parts of a source. In addition to piezoelectric materials, research efforts to develop optimization methods for complex piezoelectric energy harvesters are also reviewed. The book is important for specialists in the field of modern advanced materials and will stimulate new effective piezotechnical applications.

Li-Co-Mn-Ni oxides have been of extreme interest as potential positive electrode materials for next generation Li-ion batteries. Though many promising materials have been discovered and studied extensively, much debate remains in the literature about the structures of these materials. There is no consensus as to whether the lithium-rich layered materials are single-phase or form a layered-layered composite on the few nanometer length-scales. Much of this debate came about because no phase diagrams existed to describe these systems under the synthesis conditions used to make electrode materials. Detailed in this thesis are the complete Li-Co-Mn-O and Li-Mn-Ni-O phase diagrams generated by way of the combinatorial synthesis of mg-scale samples at over five hundred compositions characterized with X-ray diffraction. Selected bulk samples were used to confirm that the findings are relevant to synthesis conditions used commercially. The results help resolve a number of points of confusion and contradiction in the literature. Amongst other important findings, the compositions and synthesis conditions giving rise to layered-layered nano-composites are presented and electrochemical results are used to show how better electrode materials can be achieved by making samples in the single phase-layered regions.

This book covers the topic of eddy current nondestructive evaluation, the most commonly practiced method of electromagnetic nondestructive evaluation (NDE). It emphasizes a clear presentation of the concepts, laws and relationships of electricity and magnetism upon which eddy current inspection methods are founded. The chapters include material on signals obtained using many common eddy current probe types in various testing environments. Introductory mathematical and physical concepts in electromagnetism are introduced in sufficient detail and summarized in the Appendices for easy reference. Worked examples and simple calculations that can be done by hand are distributed throughout the text. These and more complex end-of-chapter examples and assignments are designed to impart a working knowledge of the connection between electromagnetic theory and the practical measurements described. The book is intended to equip readers with sufficient knowledge to optimize routine eddy current NDE inspections, or design new ones. It is useful for graduate engineers and scientists seeking a deeper understanding of electromagnetic methods of NDE than can be found in a guide for practitioners.

Micromanufacturing and Nanotechnology is an emerging technological infrastructure and process that involves manufacturing of products and systems at the micro and nano scale levels. Development of micro and nano scale products and systems are underway due to the reason that they are faster, accurate and less expensive. Moreover, the basic functional units of such systems possesses remarkable mechanical, electronic and chemical properties compared to the macro-scale counterparts. Since this infrastructure has already become the prefered choice for the design and development of next generation products and systems it is now necessary to disseminate the conceptual and practical phenomenological know-how in a broader context. This book incorporates a selection of research and development papers. Its scope is the history and background, underlynig design methodology, application domains and recent developments.

The book summarizes recent international research and experimental developments regarding fatigue crack growth investigations of rubber materials. It shows the progress in fundamental as well as advanced research of fracture investigation of rubber material under fatigue loading conditions, especially from the experimental point of view. However, some chapters will describe the progress in numerical modeling and physical description of fracture mechanics and cavitation phenomena in rubbers. Initiation and propagation of cracks in rubber materials are dominant phenomena which determine the lifetime of these soft rubber materials and, as a consequence, the lifetime of the corresponding final rubber parts in various fields of application. Recently, these phenomena became of great scientific interest due to the development of new experimental methods, concepts and models. Furthermore, crack phenomena have an extraordinary impact on rubber wear and abrasion of automotive tires; and understanding of crack initiation and growth in rubbers will help to support the growthing number of activities and worldwide efforts of reduction of tire wear losses and abrasion based emissions.

Ion implantation is one of the key processing steps in silicon integrated circuit technology. Some integrated circuits require up to 17 implantation steps and circuits are seldom processed with less than 10 implantation steps. Controlled doping at controlled depths is an essential feature of implantation. Ion beam processing can also be used to improve corrosion resistance, to harden surfaces, to reduce wear and, in general, to improve materials properties. This book presents the physics and materials science of ion implantation and ion beam modification of materials. It covers ion-solid interactions used to predict ion ranges, ion straggling and lattice disorder. Also treated are shallow-junction formation and slicing silicon with hydrogen ion beams. Topics important for materials modification topics, such as ion-beam mixing, stresses, and sputtering, are also described.

This text, the first of its kind, delivers a systematically organized introduction to the theory and practice of yield prediction. The book addresses the economic need for accurate yield prediction, and clarifies the important role it plays in the semiconductor industry.

This book presents research advances in the field of Continuous Media with Microstructure and considers the three complementary pillars of mechanical sciences: theory, research and computational simulation. It focuses on the following problems: thermodynamic and mathematical modeling of materials with extensions of classical constitutive laws, single and multicomponent media including modern multifunctional materials, wave propagation, multiscale and multiphysics processes, phase transformations, and porous, granular and composite materials. The book presents the proceedings of the 2nd Conference on Continuous Media with Microstructure, which was held in 2015 in Lagow, Poland, in memory of Prof. Krzysztof Wilmanski.

This volume of Modern Aspects covers a wide spread of topics presented in an authoritative, informative and instructive manner by some internationally renowned specialists. Professors Politzer and Dr. Murray provide a comprehensive description of the various theoretical treatments of solute-solvent interactions, including ion-solvent interactions. Both continuum and discrete molecular models for the solvent molecules are discussed, including Monte Carlo and molecular dynamics simulations. The advantages and drawbacks of the resulting models and computational approaches are discussed and the impressive progress made in predicting the properties of molecular and ionic solutions is surveyed. The fundamental and applied electrochemistry of the silicon/electrolyte interface is presented in an authoritative review by Dr. Gregory Zhang, with emphasis in the preparation of porous silicon, a material of significant technological interest, via anodic dissolution of monocrystalline Si. The chapter shows eloquently how fundamental electrokinetic principles can be utilized to obtain the desired product morphology. Markov chains theory provides a powerful tool for modeling several important processes in electrochemistry and electrochemical engineering, including electrode kinetics, anodic deposit formation and deposit dissolution processes, electrolyzer and electrochemical reactors performance and even reliability of warning devices and repair of failed cells. The way this can be done using the elegant Markov chains theory is described in lucid manner by Professor Thomas Fahidy in a concise chapter which gives to the reader only the absolutely necessary mathematics and is rich in practical examples.

It is now 10 years since the first edition of Engineering Coatings by Stan Grainger appeared. The success of that edition, and the developments in the area since its publication make this new edition a valuable addition
to the literature on the subject.
This new edition describes the many methods by which surface coatings or surface modification can be carried out to delay surface degradation and prolong the useful life of engineering components. Since surface technology has advanced in many areas, new techniques such as the newer thermal spray processes and laser surfacing are now covered and the book has been expanded to include more coverage on corrosion.
Major changes have also taken place in health and safety legislation, and the sections covering health and safety have been entirely revised as a result. Engineering Coatings with its breadth of coverage and sound basis in
industrial practice is an invaluable guide to methods which have the potential to save money in many industries concerned with wear, corrosion, welding and thermal spraying of engineering components.

This book provides insights into sensor development for structural health monitoring. Current technological advances mean that the field is changing rapidly, making standardization an ongoing challenge. As such, the book gathers several essential contributions in the area of sensor development, including macro-fiber composite sensors for crack detection and optical fiber Bragg gratings for flaw detection. It also discusses the use of the welds in the structure as sensors, and probability estimation of detection for various sensor configurations. In addition, it presents methods based on vibration signal variations to detect small defects in composite components or to monitor large structures. Last but not least, the book includes special structural health monitoring applications in industrial components such as a nuclear boiler support spines and industrial presses as well as in corrosion monitoring of pipes.

This second edition of the highly successful dictionary offers more than 300 new or revised terms. A distinguished panel of electrochemists provides up-to-date, broad and authoritative coverage of 3000 terms most used in electrochemistry and energy research as well as related fields, including relevant areas of physics and engineering. Each entry supplies a clear and precise explanation of the term and provides references to the most useful reviews, books and original papers to enable readers to pursue a deeper understanding if so desired. Almost 600 figures and illustrations elaborate the textual definitions. The "Electrochemical Dictionary" also contains biographical entries of people who have substantially contributed to electrochemistry. From reviews of the first edition: 'the creators of the Electrochemical Dictionary have done a laudable job to ensure that each definition included here has been defined in precise terms in a clear and readily accessible style' (The Electric Review) 'It is a must for any scientific library, and a personal purchase can be strongly suggested to anybody interested in electrochemistry' (Journal of Solid State Electrochemistry) 'The text is readable, intelligible and very well written' (Reference Reviews)

This book presents concepts, methods and techniques to examine symptoms of faults and failures of structures, systems and components and to monitor functional performance and structural integrity. The book is organized in five parts. Part A introduces the scope and application of technical diagnostics and gives a comprehensive overview of the physics of failure. Part B presents all relevant methods and techniques for diagnostics and monitoring: from stress, strain, vibration analysis, nondestructive evaluation, thermography and industrial radiology to computed tomography and subsurface microstructural analysis. Part C cores the principles and concepts of technical failure analysis, illustrates case studies, and outlines machinery diagnostics with an emphasis on tribological systems. Part D describes the application of structural health monitoring and performance control to plants and the technical infrastructure, including buildings, bridges, pipelines, electric power stations, offshore wind structures, and railway systems. And finally, Part E is an excursion on diagnostics in arts and culture. The book integrates knowledge of basic sciences and engineering disciplines with contributions from research institutions, academe, and industry, written by internationally known experts from various parts of the world, including Europe, Canada, India, Japan, and USA.