Precision Manufacturing provides an introduction to precision engineering for manufacturing. With an emphasis on design and performance of precision machinery for manufacturing machine tool elements and structure, sources of error, precision machining processes and process models sensors for process monitoring and control, metrology, actuators, and machine design.

This book will be of interest to design engineers, quality engineers and manufacturing engineers, academics and those who may or may not have previous experience with precision manufacturing, but want to learn more.

The IFAC Workshop on Intelligent Components for Vehicles (ICV'98) was held in Seville (Spain), on March 23-24 1998. The event follows the Workshop on Intelligent Components for Autonomous and Semiautonomous Vehicles (ICASAV'95) held in Toulouse (France, October 1995).

The main objective of ICV'98 was to bring together specialists on components and instruments for automotive systems, mobile robots and vehicles in general to enhance the value of their experience in both hardware and software intelligent components.

Future vehicles will deal more and more with autonomous functions to improve safety and traffic management and to reduce consumption and pollution. Numerous on-board decision systems will replace the driver in critical running phases. The problems and solutions experienced, by adopting this new technology, will bring out many common points with other transportation systems and mobile robots.

Research and Developments on Mobile Robotics have produced many components for perception, control and planning that can be used in vehicles for collision detection and avoidance, position estimation, guidance and manoeuvering aids for drivers, advanced teleoperation, and other applications.

The topics of the Workshop are in an emerging field in which the research is quickly being converted into industrial products. Several applications in the automotive domain, marine vehicles, agricultural and others were included in the program.

In addition to the presentation of the papers, ICV also included a plenary talk and a round table about intelligent components for future vehicles with the participation of several industrial companies.

This book reviews existing operational software failure analysis techniques and proposes near-miss analysis as a novel, and new technique for investigating and preventing software failures. The authors provide details on how near-miss analysis techniques focus on the time-window before the software failure actually unfolds, so as to detect the high-risk conditions that can lead to a major failure. They detail how by alerting system users of an upcoming software failure, the detection of near misses provides an opportunity to collect at runtime failure-related data that is complete and relevant. They present a near-miss management systems (NMS) for detecting upcoming software failures, which can contribute significantly to the improvement of the accuracy of the software failure analysis. A prototype of the NMS is implemented and is discussed in the book. The authors give a practical hands-on approach towards doing software failure investigations by means of near-miss analysis that is of use to industry and academia

In 2007 INTEROP-VLab defined Enterprise Interoperability as the ability of an enterprise system or application to interact with others at a low cost with a flexible approach . Enterprise Interoperability VI brings together a peer reviewed selection of over 40 papers, ranging from academic research through case studies to industrial and administrative experience of interoperability. It shows how, in a scenario of globalised markets, the capacity to cooperate with other firms efficiently becomes essential in order to remain in the market in an economically, socially and environmentally cost-effective manner, and that the most innovative enterprises are beginning to redesign their business model to become interoperable. This goal of interoperability is vital, not only from the perspective of the individual enterprise but also in the new business structures that are now emerging, such as supply chains, virtual enterprises, interconnected organisations or extended enterprises, as well as in mergers and acquisitions. Establishing efficient and relevant collaborative situations requires managing interoperability from a dynamic perspective: a relevant and efficient collaboration of organizations might require adaptation to remain in line with potentially changing objectives, evolving resources, and unexpected events, for example. Many of the papers contained in this, the seventh volume of Proceedings of the I-ESA Conferences have examples and illustrations calculated to deepen understanding and generate new ideas. The I-ESA 14 Conference is jointly organised by Ecole des Mines Albi-Carmaux, on behalf of PGSO, and the European Virtual Laboratory for Enterprise Interoperability (INTEROP-VLab) and supported by the International Federation for Information Processing (IFIP). A concise reference to the state of the art in systems interoperability, Enterprise Interoperability VI will be of great value to engineers and computer scientists working in manufacturing and other process industries and to software engineers and electronic and manufacturing engineers working in the academic environment."

This book discussing in detail the Social Life Cycle Assessment (SLCA) of the global economy using the comprehensive Multi-Regional Input-Output (MRIO) technique. The content is presented in two parts, the first of which offers an introduction to social accounting and how it has been developed over the past few years with details on the methodologies and databases used. The second part of the book describes the footprints of the social accounts that have the highest impact on people's well-being (employment, income, working conditions,and inequality) and how they are linked to international trade. The need for reporting on such indicators falls within the purview of corporate/national social responsibility (part of the Triple Bottom Line). The book offers a valuable contribution to the literature for researchers and students engaged in the social sciences, human rights, and the implications of international trade on labour in developing countries.iv>

This book introduces process control to engineers and technicians unfamiliar with control techniques, providing an understanding of how to actually apply control in a real industrial environment. It avoids analytical treatment of the numerous statistical process control techniques to concentrate on the practical problems involved. A practical approach is taken, making it relevant in virtually all manufacturing and process industries.
There is currently no information readily available to practising engineers or students that discusses the real problems and such material is long overdue.
An indispensable guide for all those involved in process control
Includes equipment specification, troubleshooting, system specification and design
Provided with guidelines of HOW TO and HOW NOT TO install process control

Water engineers require knowledge of stochastic, frequency concepts, uncertainty analysis, risk assessment, and the processes that predict unexpected events.

This book presents the basics of stochastic, risk and uncertainty analysis, and random sampling techniques in conjunction with straightforward examples which are solved step by step. In addition, appropriate Excel functions are included as an alternative to solve the examples, and two real case studies is presented in the last chapters of book.

Reliability theory is a multidisciplinary science aimed at developing complex systems that are resistant to failures. Reliability engineering has emerged as a main field not only for scientists and researchers, but also for engineers and industrial managers. This book covers the recent developments in reliability engineering. It presents new theoretical issues that were not previously published, as well as the solutions of practical problems and case studies illustrating the applications methodology. This book is written by a number of leading scientists, analysts, mathematicians, statisticians, and engineers who have been working on the front end of reliability science and engineering. Reliability Engineering: Theory and Applications covers the recent developments in reliability engineering. It presents new theoretical issues that were not previously presented in the literature, as well as the solutions of important practical problems and case studies illustrating the applications methodology. Features Covers applications to reliability engineering practice Discusses current advances and developments Introduces current achievements in the field Considers and analyses case studies along with real world examples Presents numerous examples to illustrate the theoretical results

The high reliability required in industrial processes has created the necessity of detecting abnormal conditions, called faults, while processes are operating. The term fault generically refers to any type of process degradation, or degradation in equipment performance because of changes in the process's physical characteristics, process inputs or environmental conditions. This book is about the fundamentals of fault detection and diagnosis in a variety of nonlinear systems which are represented by ordinary differential equations. The fault detection problem is approached from a differential algebraic viewpoint, using residual generators based upon high-gain nonlinear auxiliary systems ('observers'). A prominent role is played by the type of mathematical tools that will be used, requiring knowledge of differential algebra and differential equations. Specific theorems tailored to the needs of the problem-solving procedures are developed and proved. Applications to real-world problems, both with constant and time-varying faults, are made throughout the book and include electromechanical positioning systems, the Continuous Stirred Tank Reactor (CSTR), bioreactor models and belt drive systems, to name but a few.

Owing to the development and rapid spread of communication technologies including the Internet, the world is indeed turning into a global village. The rate of introduction of new products and technologies is steadily rising. At the same time, pressures to reduce time-to-market are mounting. Only companies that are able to realize products rapidly are able to survive today.
From a technological viewpoint, rapid product realization involves rapid design, rapid prototyping, and rapid tooling. Fortunately, a class of technologies, also collectively called rapid prototyping (RP) technologies, has emerged in the last two decades or so to meet these requirements. Early technologies merely aimed to produce single part look-alikes. However, intense R&D efforts are taking place around the world to go beyond mere look alike' single part prototyping, into functional, multi-part assemblies.
RP technologies are different from other modern manufacturing technologies in many ways. In RP, material is usually added incrementally in a layered manner and, occasionally, subtracted. Some technologies depend upon layers of resin cured under the influence of one or more CNC controlled laser beams. Others use lasers to selectively sinter layers of powdered metal. There are also RP technologies that do not use lasers at all. Indeed, RP is turning out to be a potent arena for technological creativity.
This book provides an updated overview of RP technologies at a level of detail that university engineering students taking courses on RP as well R&D and operating professionals from industry interested in RP are likely to find attractive. While the emphasis is on laser-based technologies, other processesare also discussed. With respect to each important RP process, the part/assembly modeling techniques, the materials used, process itself, advantages and disadvantages, accuracy and finish issues as well as application potential are discussed.

This book offers readers a concise yet comprehensive introduction to a set of diagnostic methods for on-line condition monitoring of lubricated tribosystems used in industry. It covers the latest trends in on-line tribodiagnostics, an important and rapidly developing area of tribology. The book also reports on new tools as they have been developed and applied by the authors. A special emphasis is given to the physical fundamentals of opto-magnetic detectors, ferro-analyzers and analyzers of metal particles in lubricated tribosystems, as well as fluorescence methods for real-time oil monitoring in compressors, hydraulic systems and electrical transformers. Further, the book discusses other important issues such as the monitoring of water content in oil, and presents techniques for measuring soot content in oil in diesel engine oils. Lastly, it describes the modular intelligent (SMART) diagnostic system for vehicles. Mainly intended for researchers, industrial and automotive engineers developing cost-effective techniques and sensors for the on-line monitoring of lubricating oil, the book also offers a valuable source of information for students and project managers in the manufacturing, energy, oil and gas, and automotive industry.

This volume gathers selected peer-reviewed papers presented at the XXVI International Joint Conference on Industrial Engineering and Operations Management (IJCIEOM), held on July 8-11, 2020 in Rio de Janeiro, Brazil. The respective chapters address a range of timely topics in industrial engineering, including operations and process management, global operations, managerial economics, data science and stochastic optimization, logistics and supply chain management, quality management, product development, strategy and organizational engineering, knowledge and information management, work and human factors, sustainability, production engineering education, healthcare operations management, disaster management, and more. These topics broadly involve fields like operations, manufacturing, industrial and production engineering, and management. Given its scope, the book offers a valuable resource for those engaged in optimization research, operations research, and practitioners alike.

This book presents concepts, methods and techniques to examine symptoms of faults and failures of structures, systems and components and to monitor functional performance and structural integrity. The book is organized in five parts. Part A introduces the scope and application of technical diagnostics and gives a comprehensive overview of the physics of failure. Part B presents all relevant methods and techniques for diagnostics and monitoring: from stress, strain, vibration analysis, nondestructive evaluation, thermography and industrial radiology to computed tomography and subsurface microstructural analysis. Part C cores the principles and concepts of technical failure analysis, illustrates case studies, and outlines machinery diagnostics with an emphasis on tribological systems. Part D describes the application of structural health monitoring and performance control to plants and the technical infrastructure, including buildings, bridges, pipelines, electric power stations, offshore wind structures, and railway systems. And finally, Part E is an excursion on diagnostics in arts and culture. The book integrates knowledge of basic sciences and engineering disciplines with contributions from research institutions, academe, and industry, written by internationally known experts from various parts of the world, including Europe, Canada, India, Japan, and USA.

The safe management of the complex distributed systems and critical infrastructures which constitute the backbone of modern industry and society entails identifying and quantifying their vulnerabilities to design adequate protection, mitigation, and emergency action against failure. In practice, there is no fail-safe solution to such problems and various frameworks are being proposed to effectively integrate different methods of complex systems analysis in a problem-driven approach to their solution. Vulnerable Systems reflects the current state of knowledge on the procedures which are being put forward for the risk and vulnerability analysis of critical infrastructures. Classical methods of reliability and risk analysis, as well as new paradigms based on network and systems theory, including simulation, are considered in a dynamic and holistic way. Readers of Vulnerable Systems will benefit from its structured presentation of the current knowledge base on this subject. It will enable graduate students, researchers and safety and risk analysts to understand the methods suitable for different phases of analysis and to identify their criticalities in application.

'Optimization Day' (OD) has been a series of annual mini-conferences in Aus tralia since 1994. The purpose of this series of events is to gather researchers in optimization and its related areas from Australia and their collaborators, in order to exchange new developments of optimization theories, methods and their applications. The first four OD mini-conferences were held in The Uni versity of Ballarat (1994), The University of New South Wales (1995), The University of Melbourne (1996) and Royal Melbourne Institute of Technology (1997), respectively. They were all on the eastern coast of Australia. The fifth mini-conference Optimization Days was held at the Centre for Ap plied Dynamics and Optimization (CADO), Department of Mathematics and Statistics, The University of Western Australia, Perth, from 29 to 30 June 1998. This is the first time the OD mini-conference has been held at the west ern coast of Australia. This fifth OD preceded the International Conference on Optimization: Techniques and Applications (ICOTA) held at Curtin Uni versity of Technology. Many participants attended both events. There were 28 participants in this year's mini-conference and 22 presentations in the mini conference. The presentations in this volume are refereed contributions based on papers presented at the fifth Optimization Days mini-conference. The volume is di vided into the following parts: Global Optimization, Nonsmooth Optimization, Optimization Methods and Applications."

This book focuses on the emerging additive manufacturing technology and its applications beyond state-of-the-art, fibre-reinforced thermoplastics. It also discusses the development of a hybrid, integrated process that combines additive and subtractive operations in a single-step platform, allowing CAD-to-Part production with freeform shapes using long or continuous fibre-reinforced thermoplastics. The book covers the entire value chain of this next-generation technology, from part design and materials composition to transformation stages, product evaluation, and end-of-life studies. Moreover, it addresses the following engineering issues: * Design rules for hybrid additive manufacturing; * Thermoplastic compounds for high-temperature and -strength applications; * Advanced extrusion heads and process concepts; * Hybridisation strategies; * Software ecosystems for hAM design, pre-processing, process planning, emulating and multi-axis processing; * 3D path generators for hAM based on a multi-objective optimisation algorithm that matches the recent curved adaptive slicing method with a new transversal scheme; * hAM parameters, real-time monitoring and closed-loop control; * Multiparametric nondestructive testing (NDT) tools customised for FRTP AM parts; * Sustainable manufacturing processes validated by advanced LCA/LCC models.

This book focuses on the introduction of new and modern maintenance management frameworks of assets in the electricity & gas network sector and more specifically, on electricity networks for distribution. The author describes methodologies for developing and implementing maintenance management maturity models, using case studies to show how these have been applied. These maturity models are discussed as part of an overarching, multi-disciplinary organizational maintenance management professionalization framework. This book adds a new dimension to the well-known Reliability Centered Maintenance (RCM) method, by incorporating failure modes via multiple scenarios into business values, by means of statistical risk calculation methods. The author demonstrates a method called Utility Risk Linked RCM, which uses a statistical tool to develop failure models which can be used to predict future failure behavior of assets in relation to corporate business values. This new method is a practical, structured and comprehensive framework for assessing risk based maintenance policies. The book also proposes a condition monitoring framework that can be used as a guide to assist asset managers in identifying the relationship between failure modes, ageing processes to select amongst condition monitoring regimes.

With a bias for action, this book offers valuable insight into the origins of the much-celebrated Danish design tradition and how it can be employed to create design solutions to address today's environmental crisis using the planetary boundaries as positive creative constraints. Danish design has long been revered for its high-quality aesthetics, materials and craftmanship, encouraging sustainability without compromise. This book explores the lessons to be learnt from Scandinavian design ideals, introduces the philosophy and principles of circular economy, and showcases the potential power of combining circular economy and design in helping to mitigate the effects of climate change. It presents a range of case study examples across multiple sectors and includes interviews with Danish designers in architecture, furniture, fashion, digital design and industrial design, providing unique insights from some of the world's leading contemporary designers. Bridging theory and real-world insights and experiences, the book builds on the framework of the 4R’s The Circular Way: Reduce, Reuse, Recycle and Replace to encourage innovation through the replacement of environmentally damaging materials and business models. A must-read for product designers, industrial designers, consultants, business developers, sustainability professionals and students interested in learning how to design and implement circular, sustainable models into practice.

This classic text has now been completely revised and updated, making it an ideal introductory course in reliability for a wide range of engineering qualifications, including City & Guilds 8030 and HNC/Ds. A new chapter focuses on the role of the microprocessor and microcomputer controller, and the use of algorithms for monitoring system performance. The addition of numerous problems, self-check questions and exam-style questions makes this an extremely useful book for courses with an element of independent study.

G W A Dummer was born in 1909, and his career included pioneering work in the field of radar. Working on radar reliability in the early fifties, he became the first person in the world to propose and pioneer the integrated circuit. In recognition of his distinguished career, he has received the USA Medal of Freedom and the MBE.
Mike Tooley is Director of Curriculum and quality at Brooklands College, Surrey and a well-known author of textbooks in microelectronics and engineering. He currently teaches reliability.
R C Winton, MBE, worked for Mullard for 40 years, and played an important role on may committees such as the CBI Education and Training Committee. He was also a key figure at the IEEE, becoming Secretary of the UK and Republic of Ireland section.

A basic text in reliability ideal for a wide range of engineering courses
A classic brought fully up to date for today's students
New self-check questions make this book suitable for independent study

2 Radiant sets 236 3 Co-radiant sets 239 4 Radiative and co-radiative sets 241 5 Radiant sets with Lipschitz continuous Minkowski gauges 245 6 Star-shaped sets and their kernels 249 7 Separation 251 8 Abstract convex star-shaped sets 255 References 260 11 DIFFERENCES OF CONVEX COMPACTA AND METRIC SPACES OF CON- 263 VEX COMPACTA WITH APPLICATIONS: A SURVEY A. M. Rubinov, A. A. Vladimirov 1 Introduction 264 2 Preliminaries 264 3 Differences of convex compact sets: general approach 266 4 Metric projections and corresponding differences (one-dimensional case) 267 5 The *-difference 269 6 The Demyanov difference 271 7 Geometric and inductive definitions of the D-difference 273 8 Applications to DC and quasidifferentiable functions 276 9 Differences of pairs of set-valued mappings with applications to quasidiff- entiability 278 10 Applications to approximate subdifferentials 280 11 Applications to the approximation of linear set-valued mappings 281 12 The Demyanov metric 282 13 The Bartels-Pallaschke metric 284 14 Hierarchy of the three norms on Qn 285 15 Derivatives 287 16 Distances from convex polyhedra and convergence of convex polyhedra 289 17 Normality of convex sets 290 18 D-regular sets 291 19 Variable D-regular sets 292 20 Optimization 293 References 294 12 CONVEX APPROXIMATORS.

This book systematically discusses the modeling and application of transfer manipulation for flexible electronics packaging, presenting multiple processes according to the geometric sizes of the chips and devices as well as the detailed modeling and computation steps for each process. It also illustrates the experimental design of the equipment to help readers easily learn how to use it. This book is a valuable resource for scholars and graduate students in the research field of microelectronics.

This book presents the selected peer-reviewed proceedings of the International Conference on Innovative Engineering Design (ICOIED 2020). The contents provide a multidisciplinary approach for the development of innovative product design and their benefits for the society. The book presents latest advances in various fields like design process, service development, micro/nano technology, sensors and MEMS, and sustainability in engineering design. This book can be useful for students, researchers, and professionals interested in innovative product/process design and development.

The primary aim of this volume is to provide researchers and engineers from both academia and industry with up-to-date coverage of recent advances in the fields of robotic welding, intelligent systems and automation. It gathers selected papers from the 2017 International Workshop on Intelligentized Welding Manufacturing (IWIWM'2017), held June 23-26, 2017 in Shanghai, China. The contributions reveal how intelligentized welding manufacturing (IWM) is becoming an inescapable trend, just as intelligentized robotic welding is becoming a key technology. The volume is divided into four main parts: Intelligent Techniques for Robotic Welding, Sensing in Arc Welding Processing, Modeling and Intelligent Control of Welding Processing, and Intelligent Control and its Applications in Engineering.

Enterprise Interoperability is the ability of an enterprise or organisation to work with other enterprises or organisations without special effort. It is now recognised that interoperability of systems and thus sharing of information is not sufficient to ensure common understanding between enterprises. Knowledge of information meaning and understanding of how is to be used must also be shared if decision makers distributed between those enterprises in the network want to act consistently and efficiently. Industry's need for Enterprise Interoperability has been one of the significant drivers for research into the Internet of the Future. EI research will embrace and extend contributions from the Internet of Things and the Internet of Services, and will go on to drive the future needs for Internets of People, Processes, and Knowledge.

These proceedings capture papers presented at the third International Conferences on Sustainable Automotive Technologies (ICSAT), held at the Clemson University International Center for Automotive Research (CU-ICAR), Greenville, South Carolina, USA, during 5-6 April 2011. ICSAT is the state-of-the-art conference in the field of new technologies for transportation. The book summarizes all important trends in sustainability of automotive development today with a special focus on materials, propulsion technologies as well as manufacturing issues. It provides a brief selection of papers and key-note speakers of the conference. Papers from the US, Australia, Europe and Asia are showing the lighthouse character of the conference, in a field which gains more and more importance as far as emissions and the lack of fossil fuels in the future are concerned. The book provides a very good overview of R&D activities at OEMs as well as in leading universities and laboratories; the special focus is on new ideas for sustainable mobility.