The book investigates how, and which, forgiving road environments (FOR) andself-explaining road measures (SER) will contribute to increasing road safety and also increase network efficiency on the road.

It presents both the general approach and the methodology for generating the possible FOR and SER measures. The book further discusses the prioritization and the testing methodologies, as well as the designing VMS methodology.

The next parts of the book present a few important examples: lane departure warning systems; intelligent speed adaptation systems and perception enhancement studies;designs of European pictorial signs, e.g. for VMS but also examples of designs of European road wordings; and finally how personalization can take place of VMS signs and wordings for the individual driver.

The last part shows the final evaluation of FOR and SER, anddetailed Multiple Criterion Analysis and Cost Benefit Analyses are performed on a number of FOR and SER measures. This results in the development of a set of guidelines, conclusions and recommendations for the future.

Internal combustion engines (ICE) still have potential for substantial improvements, particularly with regard to fuel efficiency and environmental compatibility. In order to fully exploit the remaining margins, increasingly sophisticated control systems have to be applied. This book offers an introduction to cost-effective model-based control-system design for ICE. The primary emphasis is put on the ICE and its auxiliary devices. Mathematical models for these processes are developed and solutions for selected feedforward and feedback control-problems are presented.

The discussions concerning pollutant emissions and fuel economy of ICE in automotive applications constantly intensified since the first edition of this book was published. Concerns about the air quality, the limited resources of fossil fuels and the detrimental effects of greenhouse gases exceedingly spurred the interest of both the industry and academia in further improvements.

The most important changes and additions included in this second edition are: restructured and slightly extended section on superchargers, short subsection on rotational oscillations and their treatment on engine test-benches, complete section on modeling, detection, and control of engine knock, improved physical and chemical model for the three-way catalytic converter, new methodology for the design of an air-to-fuel ratio controller, short introduction to thermodynamic engine-cycle calculation and corresponding control-oriented aspects.

The volume will include selected and reviewed papers from CONAT - International Congress of Automotive and Transport Engineering to be held in Brasov, Romania, in October 2016. Authors are experts from research, industry and universities coming from 14 countries worldwide. The papers are covering the latest developments in automotive vehicles and environment, advanced transport systems and road traffic, heavy and special vehicles, new materials, manufacturing technologies and logistics, accident research and analysis and innovative solutions for automotive vehicles. The conference will be organized by SIAR (Society of Automotive Engineers from Romania) in cooperation with FISITA.

Service Life Prediction of Polymeric Materials: Global Perspectives combines developed content derived from topics discussed in the Fourth International Symposium on Service Life Prediction (Key Largo, Florida, December 2006). This critical examination of the existing and alternative methodologies used to assess the service life of polymeric materials presents readers with the advances in accelerated and field exposure testing protocols. Written by established experts in the service life community, this volume introduces advanced methods, including high throughput and combinatorial analyses, models data collection and storage formats.

Researchers and engineers involved with materials and polymer science, coatings technologists and automotive materials will find Service Life Prediction of Polymeric Materials: Global Perspectives a useful tool.

This book explores, describes and explains the predictors essential for the acceptance of social media as a digital platform to share professional knowledge in the field of automotive repair in Germany. It reports a rigorous literature review covering key elements of social media, knowledge management and technology acceptance studies. The book assumes a pragmatist approach and applies mixed methods in an exploratory sequential design, combining qualitative and quantitative methods to ensure robust collection and analysis of the collected data. Based on a survey on German automotive repair shops, the author provides a framework, for various stakeholders, to comprehend the motivations for knowledge sharing for automotive repair professionals in Germany. This book not only adds to the existing academic body of knowledge but also provides implications for industry and legislation on a European scale.

Automotive Power Transmission Systems Yi Zhang and Chris Mi, University of Michigan-Dearborn, USA Provides technical details and developments for all automotive power transmission systems The transmission system of an automotive vehicle is the key to the dynamic performance, drivability and comfort, and fuel economy. Modern advanced transmission systems are the combination of mechanical, electrical and electronic subsystems. The development of transmission products requires the synergy of multi-disciplinary expertise in mechanical engineering, electrical engineering, and electronic and software engineering. Automotive Power Transmission Systems comprehensively covers various types of power transmission systems of ground vehicles, including conventional automobiles driven by internal combustion engines, and electric and hybrid vehicles. The book covers the technical aspects of design, analysis and control for manual transmissions, automatic transmission, CVTs, dual clutch transmissions, electric drives, and hybrid power systems. It not only presents the technical details of key transmission components, but also covers the system integration for dynamic analysis and control. Key features: * Covers conventional automobiles as well as electric and hybrid vehicles. * Covers aspects of design, analysis and control. * Includes the most recent developments in the field of automotive power transmission systems. The book is essential reading for researchers and practitioners in automotive, mechanical and electrical engineering.

Traditionally, the study of internal combustion engines operation has focused on the steady-state performance. However, the daily driving schedule of automotive and truck engines is inherently related to unsteady conditions. In fact, only a very small portion of a vehicle's operating pattern is true steady-state, e. g. , when cruising on a motorway. Moreover, the most critical conditions encountered by industrial or marine engines are met during transients too. Unfortunately, the transient operation of turbocharged diesel engines has been associated with slow acceleration rate, hence poor driveability, and overshoot in particulate, gaseous and noise emissions. Despite the relatively large number of published papers, this very important subject has been treated in the past scarcely and only segmentally as regards reference books. Merely two chapters, one in the book Turbocharging the Internal Combustion Engine by N. Watson and M. S. Janota (McMillan Press, 1982) and another one written by D. E. Winterbone in the book The Thermodynamics and Gas Dynamics of Internal Combustion Engines, Vol. II edited by J. H. Horlock and D. E. Winterbone (Clarendon Press, 1986) are dedicated to transient operation. Both books, now out of print, were published a long time ago. Then, it seems reasonable to try to expand on these pioneering works, taking into account the recent technological advances and particularly the global concern about environmental pollution, which has intensified the research on transient (diesel) engine operation, typically through the Transient Cycles certification of new vehicles.

Rapid developments in electronics over the past two decades have induced a move from purely mechanical vehicles to mechatronics design. Recent advances in computing, sensors, and information technology are pushing mobile equipment design to incorporate higher levels of automation under the novel concept of intelligent vehicles. Mechatronics and Intelligent Systems for Off-road Vehicles introduces this concept, and provides an overview of recent applications and future approaches within this field. Several case studies present real examples of vehicles designed to navigate in off-road environments typically encountered by agriculture, forestry, and construction machines. The examples analyzed describe and illustrate key features for agricultural robotics, such as automatic steering, safeguarding, mapping, and precision agriculture applications. The eight chapters include numerous figures, each designed to improve the reader's comprehension of subjects such as: * automatic steering systems; * navigation systems; * vehicle architecture; * image processing and vision; and * three-dimensional perception and localization. Mechatronics and Intelligent Systems for Off-road Vehicles will be of great interest to professional engineers and researchers in vehicle automation, robotics, and the application of artificial intelligence to mobile equipment; as well as to graduate students of mechanical, electrical, and agricultural engineering.

This books contains the Proceedings of the 4th International Conference on Power Transmissions, that was held in Sinaia, Romania from June 20 -23, 2012. Power Transmissions is a very complex and multi-disciplinary scientific field of Mechanical Engineering that covers the different types of transmissions (mechanical, hydraulic, pneumatic) as well as all the machine elements involved, such as gears, bearings, shafts, couplings and a lot more. It concerns not only their basic theory but also their design, analysis, testing, application and maintenance. The requirements set to modern power transmissions are really tough to meet: They need to be more efficient, stronger, smaller, noiseless, easier to produce and to cost less. There is a strong demand to become easier in operation and maintenance, or even automatic and in maintenance-free. Last but not least, they should be easily recycled and respect the environment. Joint efforts of specialists from both academia and industry can significantly contribute to fulfill these needs. The main goal of this conference was to bring together experts from all over the world and present the latest developments in the field of Power Transmissions.

This is the sixth volume of a sub series on Road Vehicle Automation published within the Lecture Notes in Mobility. The contents have been provided by researchers, engineers and analysts from all around the world. Topics covered include public sector activities, human factors and challenges, ethical, legal, energy and technology perspectives, vehicle systems development, as well as transportation infrastructure and planning. The book is based on the Automated Vehicles Symposium held on July 9-12, 2018 in San Francisco, CA (USA).

Dry Clutch Control for Automated Manual Transmission Vehiclesanalyses the control of a part of the powertrain which has a key role in ride comfort during standing-start and gear-shifting manoeuvres. The mechanical conception of the various elements in the driveline has long since been optimised so this book takes a more holistic system-oriented view of the problem featuring: a comprehensive description of the driveline elements and their operation paying particular attention to the clutch, a nonlinear model of the driveline for simulation and a simplified model for control design, with a standing-start driver automaton for closed loop simulation, a detailed analysis of the engagement operation and the related comfort criteria, different control schemes aiming at meeting these criteria, friction coefficient and unknown input clutch torque observers, practical implementation issues and solutions based on experience of implementing optimal engagement strategies on two Renault prototypes.

Jiji's extensive understanding of how students think and learn, what they find difficult, and which elements need to be stressed is integrated in this work. He employs an organization and methodology derived from his experience and presents the material in an easy to follow form, using graphical illustrations and examples for maximum effect. The second, enlarged edition provides the reader with a thorough introduction to external turbulent flows, written by Glen Thorncraft. Additional highlights of note: Illustrative examples are used to demonstrate the application of principles and the construction of solutions, solutions follow an orderly approach used in all examples, systematic problem-solving methodology emphasizes logical thinking, assumptions, approximations, application of principles and verification of results. Chapter summaries help students review the material. Guidelines for solving each problem can be selectively given to students.

Autonomy for Marine Robots provides a timely and insightful overview of intelligent autonomy in marine robots. A brief history of this emerging field is provided, along with a discussion of the challenges unique to the underwater environment and their impact on the level of intelligent autonomy required. Topics covered at length examine advanced frameworks, path-planning, fault tolerance, machine learning, and cooperation as relevant to marine robots that need intelligent autonomy.

The volume is devoted to the dynamics of rods, which is a branch of mech- ics of deformable bodies. The main goal of the book is to present systema- cally theoretical fundamentals of the mechanics of rods as well as numerical methods used for practical purposes. Linear and nonlinear equations governing a rod's oscillations are p- sented. Methods of determining eigenvalues and eigenfunctions in conser- tive and non-conservative problems along with numerical methods dealing with forced, parametric, and random oscillations of rods are given. Some - sues of interaction of rods with air (liquid) flows and the dynamics of spa- curved rods containing flows of liquid are considered. The book consists of nine chapters and appendices and may be conv- tionally divided into two parts. That is, Chapters 1 to 6 contain, in the main, theoretical material, whereas Chapters 7 to 9 illustrate the application of the theoretical results to problems of practical interest. Problems for self-study are found in Chapters 3, 5, and 7. The solutions to most of the problems are given in Appendix B. The monograph is addressed to undergraduate and postgraduate students and teaching staff of technical universities. It may also be useful for scientists and mechanical engineers working in a wide range of industries. I wish to express my deep appreciation to my colleagues, Dr. S.A. Voronov and C.B. Danilenko, for their help in preparing the manuscript.

This eagerly awaited second edition of Heinz Heisler's Advanced Vehicle Technology is a comprehensive and thorough description of vehice bodies and components.
The second edition has been rigorously updated to provide additional material on subjects such as antilock braking, vehicle aerodynamics, tire tread design advances, electronically controlled anti-vibration engine mountings and transport refrigeration. Around 100 new diagrams have been included to complement the text.
Advanced Vehicle Technology 2nd edition's depth of coverage, detailed illustrations and fluent and precise style are the outstanding features in this high quality student text.
More quality artwork has been added to enhance and add value to the explanation given in the text.
16 key topics have been updated to bring this 2nd edition in line with current technology.
Fully international in scope, reflecting the nature of contemporary vehicle engineering.

This book reflects the shift in design paradigm in automobile industry. It presents future innovations, often referred as "automotive systems engineering". These cause fundamental innovations in the field of driver assistance systems and electro-mobility as well as fundamental changes in the architecture of the vehicles. New driving functionalities can only be realized if the software programs of multiple electronic control units work together correctly. This volume presents the new and innovative methods which are mandatory to master the complexity of the vehicle of the future.

The book includes contributions on the latest model-based methods for the development of personal and commercial vehicle control devices. The main topics treated are: application of simulation and model design to development of driver assistance systems; physical and database model design for engines, motors, powertrain, undercarriage and the whole vehicle; new simulation tools, methods and optimization processes; applications of simulation in function and software development; function and software testing using HiL, MiL and SiL simulation; application of simulation and optimization in application of control devices; automation approaches at all stages of the development process.

Direct injection spark-ignition engines are becoming increasingly important, and their potential is still to be fully exploited. Increased power and torque coupled with further reductions in fuel consumption and emissions will be the clear trend for future developments. From today's perspective, the key technologies driving this development will be new fuel injection and combustion processes. The book presents the latest developments, illustrates and evaluates engine concepts such as downsizing and describes the requirements that have to be met by materials and operating fluids. The outlook at the end of the book discusses whether future spark-ignition engines will achieve the same level as diesel engines.

The book summarizes the main results of the the project ENABLE-S3 covering the following aspects: validation and verification technology bricks (collection and selection of test scenarios, test executions envionments incl. respective models, assessment of test results), evaluation of technology bricks in selected use cases and standardization and related initiatives. ENABLE-S3 is an industry-driven EU-project and aspires to substitute todays' cost-intensive verification and validation efforts by more advanced and efficient methods. In addition, the book includes articles about complementary international activities in order to highlight the global importance of the topic and to cover the wide range of aspects that needs to be covered at a global scale.

This comprehensive overview of chassis technology presents an up-to-date picture for vehicle construction and design engineers in education and industry. The book acts as an introduction to the engineering design of the automobile's fundamental mechanical systems. Clear text and first class diagrams are used to relate basic engineering principles to the particular requirements of the chassis. In addition, the 2nd edition of 'The Automotive Chassis' has a new author team and has been completely updated to include new technology in total vehicle and suspension design, including platform concept and four-wheel drive technology.

Fault Diagnosis of Dynamic Systems provides readers with a glimpse into the fundamental issues and techniques of fault diagnosis used by Automatic Control (FDI) and Artificial Intelligence (DX) research communities. The book reviews the standard techniques and approaches widely used in both communities. It also contains benchmark examples and case studies that demonstrate how the same problem can be solved using the presented approaches. The book also introduces advanced fault diagnosis approaches that are currently still being researched, including methods for non-linear, hybrid, discrete-event and software/business systems, as well as, an introduction to prognosis. Fault Diagnosis of Dynamic Systems is valuable source of information for researchers and engineers starting to work on fault diagnosis and willing to have a reference guide on the main concepts and standard approaches on fault diagnosis. Readers with experience on one of the two main communities will also find it useful to learn the fundamental concepts of the other community and the synergies between them. The book is also open to researchers or academics who are already familiar with the standard approaches, since they will find a collection of advanced approaches with more specific and advanced topics or with application to different domains. Finally, engineers and researchers looking for transferable fault diagnosis methods will also find useful insights in the book.

DSP for In-Vehicle and Mobile Systems is focused on digital signal processing strategies for improving information access, command and control, and communications for in-vehicle environments. It is expected that the next generation of human-to-vehicle interfaces will incorporate speech, video/image, and wireless communication modalities to provide more comfortable and safer driving ambiance. It is also expected that vehicles will become "smarter" and provide a level of wireless information sharing of resources regarding road, weather, traffic, and other information that drivers may need immediately or request at a later time while driving on the road. The format of this work centers on three themes: in-vehicle corpora, speech recognition/dialog systems with emphasis on car environments, and digital signal processing for mobile platforms involving noise suppression, image/video processing, and alternative communication scenarios that can be employed for in-vehicle applications.

DSP for In-Vehicle and Mobile Systems is appropriate for researchers and professionals working in signal processing technologies, next generation vehicle design and networked-communications.

For courses in Automotive Principles (Automotive Technology) and Engine Repair and Rebuilding (A1) (Automotive Technology) in automotive departments of vocational and trade schools, as well as community colleges. This text is part of the Pearson Automotive Series. Preparing today's automotive students for career success! Market-leading Automotive Electrical and Engine Performance has been fully updated and expanded to address the latest technology and automotive systems. Written to current ASE tasks and standards, the text covers all tasks of the A6 (Automotive Electricity and Electronics) and A8 (Automotive Engine Performance) ASE certification areas. Each chapter includes practical examples and step-by-step photo sequences covering terminology, best practices, and on-the-job procedures. The 8th edition has been revised with more concise chapters and with new chapters on air management systems, security and immobilizer systems, and safety, comfort, and convenience accessories. Over 75 new full color line drawings and photos have been added to the new edition to help bring the subject to life. Contact your Pearson representative to ask about bundling this text with the ASE Test Prep and Study Guide and ASE Correlated Task Sheets workbook.

This book elaborates the science and engineering basis for energy-efficient driving in conventional and autonomous cars. After covering the physics of energy-efficient motion in conventional, hybrid, and electric powertrains, the book chiefly focuses on the energy-saving potential of connected and automated vehicles. It reveals how being connected to other vehicles and the infrastructure enables the anticipation of upcoming driving-relevant factors, e.g. hills, curves, slow traffic, state of traffic signals, and movements of nearby vehicles. In turn, automation allows vehicles to adjust their motion more precisely in anticipation of upcoming events, and to save energy. Lastly, the energy-efficient motion of connected and automated vehicles could have a harmonizing effect on mixed traffic, leading to additional energy savings for neighboring vehicles. Building on classical methods of powertrain modeling, optimization, and optimal control, the book further develops the theory of energy-efficient driving. In addition, it presents numerous theoretical and applied case studies that highlight the real-world implications of the theory developed. The book is chiefly intended for undergraduate and graduate engineering students and industry practitioners with a background in mechanical, electrical, or automotive engineering, computer science or robotics.