This is the second book edited with a selection of papers from the two-yearly THIESEL Conference on Thermo- and Fluid Dynamic Processes in Diesel Engines, organised by CMT-Mvtores Termicos of the Universidad Po/itecnica de Valencia, Spain. This volume includes versions of papers selected from those presented at the THIESEL 2002 Conference th held on lOth to 13 September 2002. We hope it will be the second volume of a long series reflecting the quality of the THIESEL Conference. This year, the papers are grouped in six main thematic areas: State of the Art and Prospective, Injection Systems and Spray Formation, Combustion and Emissions, Engine Modelling, Alternative Combustion Concepts and Experimental Techniques. The actual conference covered a wider scope of topics, including Air Management and Fuels for Diesel Engines and a couple of papers included reflect this variety. However, the selection of papers published here represents the most current preoccupations of Diesel engine designers, namely how to improve the combustion process using new injection strategies and alternative concepts such as the Homogeneous Charge Combustion Ignition.

This volume collects contributions to the 14th Symposium of the STAB (German Aerospace Aerodynamics Association). The association involves German scientists and engineers from universities, research establishments and industry who are doing research and project work in numerical and experimental fluid mechanics and aerodynamics, mainly for aerospace but for other applications, too. The volume gives a broad overview of ongoing work in Germany in this field.

Combustion in Piston Engines presents the technique of pressure diagnostics to measure the fuel consumption in an engine cylinder and to monitor the operation of micro-electronic systems for its control. It provides a recipe for bridging the gap between the hydrocarbon-fed combustion technology of automotive powerplants of today and electro-magnetic technologies of the future. The author proposes and introduces a model for the design of a MECC (micro-electronically controlled combustion) systems to modulate combustion in engine cylinders. This system yields significant reduction in the formation of pollutants and the consumption of fuel, so that, eventually, emissions using any clean hydrocarbon fuel will be acceptable and gas mileage could be doubled.

This volume features the contributions to the 15th Symposium of the STAB (German Aerospace Aerodynamics Association). Papers provide a broad overview of ongoing work in Germany, including high aspect ratio wings, low aspect ratio wings, bluff bodies, laminar flow control and transition, active flow control, hypersonic flows, aeroelasticity, aeroacoustics, mathematical fundamentals, numerical simulations, physical fundamentals, and facilities.

Over the past decade, the transport industry has become an increasingly popular scapegoat for polluting the environment with emissions and noise. Therefore, additional transport infrastructure investments, especially in road transport, are becoming more and more contentious. Conversely, the advocates of free trade stress the importance of transport to enhance economic growth and subsequently the standards of living. Thus, political decision makers and business people alike are facing the challenge of reconciling these conflicting ideas. Though being one of the most prominent topics in public discussion, hard facts are still rare.

In order to analyze the question from a different perspective, this book sets out to combine different approaches from economics as well as business administration to stimulate scientific discourse and to support decision-makers in their efforts to ameliorate the situation.

The first part of this book contributes to the empirics of the relationship between transport and economic growth, or more specifically, whether "decoupling" of transport and economic growth appears possible. For this purpose previously unavailable regional data for Italy and Germany were collected and analyzed. The results indicate that transport makes an important contribution to economic growth.

Therefore, the second part of this book goes into more detail. Given the economic importance of transport and the resistance against the expansion of the transport infrastructure, it is essential to make efficient use of the already existing transportation network. For this purpose the author investigates which characteristics of transport are perceived as most important by decision makers, applying an adaptive conjoint analysis. The results show that transport quality in terms of timeliness, reliability, etc. seems to be at least as important as the monetary transport costs.

This book deals mainly with the problems associated with the contamination of groundwater by MTBE and TBA, but ETBE is also considered. The book, written by recognized specialists in the field, is organized in sections covering state-of-the-art analytical methods, including specific isotopic analysis, occurrence in the environment, transport and degradation processes, treatment technologies and human health risks.

Airborne Vehicle Guidance and Control Systems is a broad and wide- angled engineering and technological area for research, and continues to be important not only in military defense systems but also in industrial process control and in commercial transportation networks such as various Global Positioning Systems (GPS). The book fills a long-standing gap in the literature. The author is retired from the Air Force Institute and received the Air Force's Outstanding Civilian Career Service Award.

Computational Mechanics of Composite Materials lays stress on the advantages of combining theoretical advancements in applied mathematics and mechanics with the probabilistic approach to experimental data in meeting the practical needs of engineers.

Features:

Programs for the probabilistic homogenisation of composite structures with finite numbers of components allow composites to be treated as homogeneous materials with simpler behaviours.

Treatment of defects in the interfaces within heterogeneous materials and those arising in composite objects as a whole by stochastic modelling.

New models for the reliability of composite structures.

Novel numerical algorithms for effective Monte-Carlo simulation.

Computational Mechanics of Composite Materials will be of interest to academic and practising civil, mechanical, electronic and aerospatial engineers, to materials scientists and to applied mathematicians requiring accurate and usable models of the behaviour of composite materials.

The authors here provide a detailed treatment of the design of robust adaptive controllers for nonlinear systems with uncertainties. They employ a new tool based on the ideas of system immersion and manifold invariance. New algorithms are delivered for the construction of robust asymptotically-stabilizing and adaptive control laws for nonlinear systems. The methods proposed lead to modular schemes that are easier to tune than their counterparts obtained from Lyapunov redesign.

"Recent Advances in Reliability and Quality in Design" presents the latest theories and methods of reliability and quality, with emphasis on reliability and quality in design and modelling. Each chapter is written by active researchers and professionals with international reputations, providing material which bridges the gap between theory and practice to trigger new practices and research challenges.

Postgraduates, researchers, and practitioners in reliability engineering, maintenance engineering, quality engineering, operations research, industrial and systems engineering, mechanical engineering, computer engineering, management, and statistics will find this book a state-of-the-art survey of reliability and quality in design and practices.

Over the past 30 years, leading experts in turbomachinery unsteady aerodynamics, aer- coustics, and aeroelasticity from around the world have gathered to present and discuss recent advancements in the ?eld. The ?rst International Symposium on Unsteady Aero- namics, Aeroacoustics, and Aeroelasticity of Turbomachines (ISUAAAT) was held in Paris, France in 1976. Since then, the symposium has been held in Lausanne, Switzerland (1980), Cambridge, England (1984), Aachen, Germany (1987), Beijing, China (1989), Notre Dame, Indiana(1991), Fukuoka, Japan(1994), Stockholm, Sweden(1997), andLyon, France(2000). The Tenth ISUAAAT was held September 7-11, 2003 at Duke University in Durham, North Carolina. This volume contains an archival record of the papers presented at that meeting. The ISUAAAT, held roughly every three years, is the premier meeting of specialists in turbomachinery aeroelasticity and unsteady aerodynamics. The Tenth ISUAAAT, like its predecessors, provided a forum for the presentation of leading-edge work in turbomachinery aeromechanics and aeroacoustics of turbomachinery. Not surprisingly, with the continued development of both computer algorithms and computer hardware, the meeting featured a number of papers detailing computational methods for predicting unsteady ?ows and the resulting aerodynamics loads. In addition, a number of papers describing interesting and very useful experimental studies were presented. In all, 44 papers from the meeting are published in this v

This book covers the fundamentals of continuum mechanics, the integral formulation methods of continuum problems, the basic concepts of finite element methods, and the methodologies, formulations, procedures, and applications of various meshless methods. It also provides general and detailed procedures of meshless analysis on elastostatics, elastodynamics, non-local continuum mechanics and plasticity with a large number of numerical examples. Some basic and important mathematical methods are included in the Appendixes. For readers who want to gain knowledge through hands-on experience, the meshless programs for elastostatics and elastodynamics are provided on an included disc.

This edited collection of essays from world-leading academic and industrial authors yields insight into all aspects of reverse engineering. Methods of reverse engineering analysis are covered, along with special emphasis on the investigation of surface and internal structures. Frequently-used hardware and software are assessed and advice given on the most suitable choice of system.

Also covered is rapid prototyping and its relationship with successful reverse engineering.

A few years ago the Helmholtz Association (HGF) consisting of 15 research Institutions including the German Aerospace Center (DLR) started a network research program called 'Virtual Institutes'. The basic idea of this program was to establish research groups formed by Helmholtz research centers and universities to study and develop methods or technologies for future applications and educate young scientists. It should also enable and encourage the partners of this Virtual Institute after 3 years funding to continue their cooperation in other programs. Following this HGF request and chance the DLR Windtunnel Department of the Institute of Aerodynamics and Flow Technology took the initiative and established a network with other DLR institutes and German u- versities RWTH Aachen, University of Stuttgart and Technical University Munich. The main goal of this network was to share the experience in system analysis, ae- dynamics and material science for aerospace for improving the understanding and applicability of some key technologies for future reusable space transportation s- tems. Therefore, the virtual institute was named RESPACE (Key Technologies for Re- Usable Space Systems).

The aerospace industry increasingly relies on advanced numerical simulation tools in the early design phase. This volume provides the results of a German initiative which combines many of the CFD development activities from the German Aerospace Center (DLR), universities, and aircraft industry. Numerical algorithms for structured and hybrid Navier-Stokes solvers are presented in detail. The capabilities of the software for complex industrial applications are demonstrated.

This book introduces a dynamic, on-line fuzzy inference system. In this system membership functions and control rules are not determined until the system is applied and each output of its lookup table is calculated based on current inputs. The book describes the real-world uses of new fuzzy techniques to simplify readers' tuning processes and enhance the performance of their control systems. It further contains application examples.

From the beginnings of the International Forum on Advanced Microsystems for Automotive Application (AMAA) to the recent 11th AMAA Forum, enormous progress has been made in reducing casualties, emissions and in increasing comfort and performance. In many cases Microsystems provided key functions for this progress. This publication is a cut-out of new technological priorities in the area of microsystems-based smart devices, taking a mid-term perspective of future smart systems applications in automobiles.

Traditionally, the study of internal combustion engines operation has focused on the steady-state performance. However, the daily driving schedule of automotive and truck engines is inherently related to unsteady conditions. In fact, only a very small portion of a vehicle's operating pattern is true steady-state, e. g. , when cruising on a motorway. Moreover, the most critical conditions encountered by industrial or marine engines are met during transients too. Unfortunately, the transient operation of turbocharged diesel engines has been associated with slow acceleration rate, hence poor driveability, and overshoot in particulate, gaseous and noise emissions. Despite the relatively large number of published papers, this very important subject has been treated in the past scarcely and only segmentally as regards reference books. Merely two chapters, one in the book Turbocharging the Internal Combustion Engine by N. Watson and M. S. Janota (McMillan Press, 1982) and another one written by D. E. Winterbone in the book The Thermodynamics and Gas Dynamics of Internal Combustion Engines, Vol. II edited by J. H. Horlock and D. E. Winterbone (Clarendon Press, 1986) are dedicated to transient operation. Both books, now out of print, were published a long time ago. Then, it seems reasonable to try to expand on these pioneering works, taking into account the recent technological advances and particularly the global concern about environmental pollution, which has intensified the research on transient (diesel) engine operation, typically through the Transient Cycles certification of new vehicles.

The book focuses on the fluid dynamics of cavitation with special reference to high power density turbopumps, where it represents the major source of performance and life degradation. While covering the more fundamental aspects of cavitation and the main kinds of cavitating flows, there is focus on the hydrodynamics and instabilities of cavitating turbopumps. The book also illustrates the alternative approaches for modeling and engineering simulation of cavitating flows.

The 26th International Symposium on Shock Waves in G ttingen, Germany was jointly organised by the German Aerospace Centre DLR and the French-German Research Institute of Saint Louis ISL. The year 2007 marked the 50th anniversary of the Symposium, which first took place in 1957 in Boston and has since become an internationally acclaimed series of meetings for the wider Shock Wave Community. The ISSW26 focused on the following areas: Shock Propagation and Reflection, Detonation and Combustion, Hypersonic Flow, Shock Boundary Layer Interaction, Numerical Methods, Medical, Biological and Industrial Applications, Richtmyer Meshkov Instability, Blast Waves, Chemically Reacting Flows, Diagnostics, Facilities, Flow Visualisation, Ignition, Impact and Compaction, Multiphase Flow, Nozzles Flows, Plasmas and Propulsion. The two Volumes contain the papers presented at the symposium and serve as a reference for the participants of the ISSW 26 and individuals interested in these fields.

Flight mechanics is the application of Newton's laws to the study of vehicle trajectories (performance), stability, and aerodynamic control. This volume details the derivation of analytical solutions of airplane flight mechanics problems associated with flight in a vertical plane.

It covers trajectory analysis, stability, and control. In addition, the volume presents algorithms for calculating lift, drag, pitching moment, and stability derivatives. Throughout, a subsonic business jet is used as an example for the calculations presented in the book.

The last two decades have brought two important developments for aeroth- modynamics. One is that airbreathing hypersonic flight became the topic of technology programmes and extended system studies. The other is the emergence and maturing of the discrete numerical methods of aerodyn- ics/aerothermodynamics complementary to the ground-simulation facilities, with the parallel enormous growth of computer power. Airbreathing hypersonic flight vehicles are, in contrast to aeroassisted re-entry vehicles, drag sensitive. They have, further, highly integrated lift and propulsion systems. This means that viscous eflFects, like boundary-layer development, laminar-turbulent transition, to a certain degree also strong interaction phenomena, are much more important for such vehicles than for re-entry vehicles. This holds also for the thermal state of the surface and thermal surface effects, concerning viscous and thermo-chemical phenomena (more important for re-entry vehicles) at and near the wall. The discrete numerical methods of aerodynamics/aerothermodynamics permit now - what was twenty years ago not imaginable - the simulation of high speed flows past real flight vehicle configurations with thermo-chemical and viscous effects, the description of the latter being still handicapped by in sufficient flow-physics models. The benefits of numerical simulation for flight vehicle design are enormous: much improved aerodynamic shape definition and optimization, provision of accurate and reliable aerodynamic data, and highly accurate determination of thermal and mechanical loads. Truly mul- disciplinary design and optimization methods regarding the layout of thermal protection systems, all kinds of aero-servoelasticity problems of the airframe, et cetera, begin now to emerge."

Simplified fracture mechanics based assessment methods are widely used by the industry to determine the structural integrity significance of postulated cracks, manufacturing flaws, service-induced cracking or suspected degradation of engineering components under normal and abnormal service loads. In many cases, welded joints are the regions most likely to contain original fabrication defects or cracks initiating and growing during service operation. Various procedures provide upper bound residual stress profiles for various classes of welded joints that can be used in fracture assessments, but these often give very conservative results. Recently, the option to use more realistic profiles has been adopted, but only where such profiles are based on finite element residual stress simulations supported by detailed residual stress measurements. Rapid advances in the capability of residual stress measurement techniques, such as the contour and deep hole drilling techniques as well as the neutron and synchrotron X-ray diffraction methods, now readily allow residual stresses and strains to be mapped on defined planes within a structure. The contents of this book have been grouped into three topic areas covering theoretical /numerical and experimental analyses of residual stress and its effects on fatigue and fracture.

There is a growing interest in applying model predictive control techniques to automotive systems, often for different reasons: the simple handling of constraints, the easy use of preview information or the flexibility of the method. Some long-standing problems with this approach, like the high computational burden, have been solved or at least substantially mitigated.

Even so, many issues remain to be elucidated, and, at the same time, papers and results in the increasingly rich literature are not always comparable.

Against this background, the proceedings of the Automotive Model Predictive Control: Models, Methods and Applications workshop investigates whether constrained predictive control is reasonable in automotive control and what is necessary for its application. The workshop, held at the University of Linz on 9th 10th February 2009 brought together workers from academia and industry from three key automotive branches: modeling, control and the application. The workshop included three keynote presentations, each of them contributing to the solution of an essential question.

Which problems in automotive applications need constrained optimal control?

Models of emissions for modern engines for model based control?

Industrial methods and requirements for control schemes?

The results of testing control strategies on a dynamical engine test bench give a feeling for the necessary computing power, the model plant mismatch, etc. and thus for the real application of control laws in production cars."

Stefan Baerisch applies a combination of feature modelling and code generation, for which he uses a model-driven approach, in order to facilitate the design of tests by non-programmers. This combination of modelling and code generation allows for a more integrated and more efficient testing process.