This new edition of a highly successful book retains the emphasis on the practical approach to rancidity in foods which was the hallmark of the previous editions. There has been substantial revision to bring existing chapters up-to-date with current techniques and the inclusion of additional chapters on spectrophotometric and chromatographic analysis of oxidation, legislative and labeling aspects, and HACCP in the avoidance of rancidity. There are also new chapters on rancidity in fish and in confectionery products.

Based on in-depth study of the electronics giant Philips, Corporate Strategy, Public
Policy and New Technologies examines the key factors which have determined the
success or failure of new technologies and the global competitiveness of firms within a major
European consumer industry. Drawing on the insights gained from intensive empirical
research into the company's growth, structure and competitive strategy, the book traces the
reciprocal influences of Philips and of European Community policymaking on each other and
on the development of the industry since the 1970s.

The core of the book focuses on
detailed case studies of three major technological initiatives, and analyses the reasons for
their success or failure: the European VCR (Video Cassette Recorder) industry and Philips'
VCR 2000 format; Philips and the development of the European HDTV (High Definition
Television) system; and Philips' CD-i (Compact Disc-interactive) project. All three studies
raise important issues of competition, collaboration, technology and the role of public policy,
with a firm theoretical grounding in the most relevant and up-to-date academic
research.

In addition to providing an instructive analysis of the performance of an industry
at the levels of the firm, the state and the European Community, the book emphasises that the
strategies and policies discussed were adopted largely in response to the global challenge
from the USA and, above all, Japan.

Regulatory constraints and current management practices put the onus on food manufacturers to take all responsible precautions where hygiene is concerned. A food hygiene audit is the first step towards identifying weaknesses in an operation and this book explains in detail the areas to be inspected during such an audit. The legislative situation is covered by authors from both sides of the Atlantic, although the procedures described are universally applicable. Many companies employ expensive consultants to advise them on this subject and this book provides a cost-effective supplement or alternative. Written primarily for those in the food industry concerned with hygiene, the book is also essential background for students and researchers in government and academic institutions.

The book is an up-to-date and comprehensive description of the institutions involved in the aerospace field. It discusses the activities of the main space powers, the United Nations and other international organizations. Without listing figures and budgets, the author conveys a clear idea of the relative importance of those institutions. The novelty of this work is that, in bringing together national and international entities, it explains how those organizations interrelate and coordinate their programs. A complete picture emerges which is more than the sum of its parts.

The field of aerospace, which depends heavily on government funding and direction, has been particularly effected by the shifting alliances and recent financial troubles of the space powers. In a book which is both comprehensive and simple to understand, d'Angelo has collected the many pieces of a complex institutional mosaic to draw a clear picture of the entire framework. In addition to being up-to-date, the book is also a novelty in the sense that it describes the work of both national and international entities and explains how those organizations interrelate and coordinate their programs. Without making a list of figures and budgets, d'Angelo gives a clear idea of the relative weight of the various government activities. From the discussion of those activities the reader gains an understanding of the current state of affairs as well as future trends.

Exposed to powerful new economic forces, and undergoing dramatic ownership reforms and technological changes, China's industries are modernizing at a breakneck pace. In many industries, the outcomes have been chaotic and poorly aligned with societal objectives. This book analyses the transformation and modernization of China's industries through a detailed investigation of the wool and wool textile industries. The authors argue that to remain internationally competitive in the post WTO accession era, Chinese industries need to confront a critical new phase in the modernization process - that of improving management practices and industry co-ordination. Modernizing China's Industries is a comprehensive, integrated and in-depth investigation of industry transformation and modernization. The extensive first-hand research, across a range of industry segments and participants, spans almost two decades. The analysis reveals much about industry modernization and transition in China for a broad range of industries and therefore provides invaluable information for developing strategies and accessing opportunities within China. This book offers unique insights for academics and researchers in Asian studies, transition studies and industrial transformation, as well as policymakers and industry leaders interested in both the intricacies and mega-forces involved in China's industrial modernization. The comprehensive industry analysis also provides a valuable reference for professionals in the increasingly China-centric world of wool and wool textiles as well as offering insights for other textile industry professionals.

Filled with historical detail and personal insight, this memoir re-creates the world of textile workers in Bladenboro, North Carolina, during two decades of depression and war.

Baseball, religion, work, death, and the company store -- these figured eminently in the lives of Southern cotton mill workers and their families during the early decades of the twentieth century. In this firsthand account of his native Bladenboro, George G. Suggs, Jr., captures in rich detail the world of a thriving cotton mill town where the company was dominant but the workers had forged a strong community. Here the focus is on the workers -- their interests, personalities, and values -- in their best and in their darker moments. Ultimately we see the many dimensions of working-class culture and taste a way of life that has vanished.

Drawing upon childhood memories and his father's recollections, Suggs covers events in Bladenboro during the 1930s and '40s. He describes the nature of cotton mill work, the stresses and strains produced by undesirable working conditions, and the various ways in which workers and their families learned to cope. Many characters emerge from this story -- from the kind woman who dispensed the company fiat money to the desperate men who would gamble it away. The book explores key topics such as social rankings, medical care, the company store, and workers' responses to death. Above all, we see how faith found expression on the job and in the surrounding evangelical churches. The workers of Bladenboro are gone, and little remains of the mills, but this work pays tribute to lives well lived under the most challenging circumstances.

Organizations - whether profit or nonprofit, services or manufacturing - need to be able to adapt and transform their cultures to succeed. Yet cultural transformation can seem either too easy or completely overwhelming. "Transforming Culture" shows how effective and sustainable cultural transformation can be achieved even in a challenging environment such as a General Motors manufacturing plant. The authors offer both a practical approach and tools to draw on the energy and ideas of employees and executives, remove obstacles to change, and create durable improvements.

Japanese carmaker Honda has pioneered a new breed of multinational enterprise - true manufacturing at the global scale. Honda has been a leader in confounding predictions that Japan's carmakers would and could never transfer their success abroad, and that a wholesale 'Japanization' of the west would be provoked if they did. The book covers manufacture, research and development, sourcing of components, human resources and labour relations, collaboration with western firms, political controversy, and the role of concepts and ideas, in Japan, North America, and Europe.

Despite its long eclipse by Parisian couture, Italian fashion is now celebrated globally for the quality of its tailoring, fabric and design. But an Italian label was not always a yardstick for excellence. In the twenty years following the Second World War, a little known fact is that America played a key role in the development of Italy's fashion industry. More generally known is that the Marshall Plan had a formative influence on the financial and industrial reorganization of Italian postwar reconstruction. But America's specific influence on the regeneration of the Italian textile industry has been largely passed over, despite the meteoric rise of design houses such as Max Mara, Gucci and Prada.However, while American interest was central to the industrial and stylistic expansion of Italian fashion, the lessons learned were combined with Italian ideas and energies to create fashions with a distinctly Italian edge. This book reveals that a deliberate effort went into the development of an Italian national identity in fashion design, partially in response to American interest. Drawing on a wide range of sources, notably the testimonies of key witnesses, contemporary media reports and surviving garments, this book contributes to the scant research on twentieth century Italian dress and specifically exposes for the first time the depth of American involvement in Italian fashion in a crucial phase of its development.

This book presents a detailed industry-by-industry analysis of output and investment in American manufacturing. With imports soaring and the international indebtedness of the United States increasing, manufacturing has been the sector of the economy most threatened by outside pressures. In a growing number of products, domestic manufacture has ceased to be competitive, and in some products where American technological competence should have brought success, there are no American entries at all. The book's major chapters deal with trends and changes, from 1967 onward, in labor productivity, investment per employee, the location of manufacturing establishments, and the role and impact of imports and exports. In each case, general quantitative analysis is followed by a detailed review of the problems with the products, manufacturing processes, and markets of each industry, thus providing not only an account of the industry's current state, but an agenda for future change and improvement.

This is one of the first books to draw together information and views about international control of food safety from around the world. Demands for safe food, against a background of increasing trade, are making international controls on food safety essential. Agreements on how to control the safety of food to meet these needs are now in place among the major trading blocks, particularly in Europe and in the USA, and more recently, in Australia. This book also describes progress in areas such as systematically reviewing risk from food; developing national infrastructures to enforce standards; and growing input from consumer groups and others, including economists, to the debate on how to set international food standards. Discussed in depth is the effort to achieve global standards for food safety under the auspices of the Codex Alimentarius Commission. There are chapters from world-leading experts on Codex, international control of radiological contamination, pesticides and veterinary drugs, and other chemical contaminants.

Evidence of lean thinking implementation is found in various areas such as services, healthcare, and different industries like the automotive industry, aerospace industry, textile industry, food industry, and oil and gas industry. Such evidence points to the universality of lean thinking and how its use in different contexts increases its importance as an approach to continuous improvement. Lean Thinking in Industry 4.0 and Services for Society presents an insight into lean thinking as a philosophy that can identify problems and wastes in various areas, analyze them, and identify activities that could improve processes. Covering key topics such as industrial systems, lean safety, and lean sustainability, this reference work is ideal for industry professionals, business owners, managers, policymakers, researchers, scholars, academicians, practitioners, instructors, and students.

While there are many quality assurance books on the market, very few address the application of the concept to the seafood industry. In addition, many of the books that are available take a theoretical approach and there fore do not provide actual examples of the "fins and bones" of quality programs. The author, in teaching quality assurance over nine years, has not been able to find a textbook that is suitable as a reference text in quality assurance courses for the seafood industry. It is this situation that has prompted the preparation of this book, which takes a practical approach to the subject of quality assurance in seafood processing operations. This book can serve as either a textbook or as a reference text. As a textbook it is written for students of quality assurance at the technician, technologist, and university levels. In this role it is intended that the student will start at the beginning of the book and proceed through in sequence, so as to gain a complete understanding of the design, implementation, and operation of a quality program in seafood processing operations. It is the hope of the author that the book also functions quite well as a desk reference for the managers of seafood processing operations who need to refer occa sionally to particular items or chapters. In this sense, each chapter is designed to stand alone as a discussion of a particular concept within the quality assurance discipline."

Hurdle Technologies: Combination Treatments for Food Stability, Safety and Quality is the first work on hurdle technology in which all aspects, the possibilities and limitations of hurdle technology, are comprehensively outlined and evaluated. World-renowned on the subject, Leistner and Gould were instrumental in the development of the hurdle technology concept and in the last decades have obtained much practical experience in the application of this successful approach in the food industry worldwide.

The Compelling Saga of One of the World's Oldest Companies.Combining ancient craftsmanship with modern technology andmarketing innovations, Japan's Kikkoman Corporation hasquietly become a $2 billion market leader. The KikkomanChronicles is the fascinating story of how Kikkoman changedthe course of international marketing, shrewdly adapting to20th century realities while never truning their backs oncenturies of tradition; how one man envisioned the future ofglobal enterprise, spearheading the first Japanese manufacturing plant of any kind on U.S. soil; and howgenerations of Mogi family leadership have produced one oftoday's most formidable global competitors.More than an authoritative how-to international business, The Kikkoman Chronicles is the spellbinding story of: Shige Maki, the tough and resourceful woman who narrowlyescaped the 17th century siege of Osaka Castle to sow theseeds to today's Kikkoman Corporation. Kikkoman's survivaland adaptation across more than 300 hyears of social andpolitical upheaval in Japan. Innovative strategies Kikkoman has followed to become the world leader in the productionand marketing of soy sauce - an Asian staple.The Kikkoman Chronicles is a one-of-a-kind corporatebiography. By combining anecdotes and stories about Japan'samazing history wth hands-on tips and recommendations forproven international business success, Ronald E. Yates hasproduced an entertaining book that should become required reading for businesspersons and students throughout the world.

The 2022 edition of the Rules and Guidance for Pharmaceutical Distributors, the 'Green Guide', is the essential reference for all distributors, brokers of human medicines, importers and distributors of active substances in the UK.It provides you with the single authoritative source of European good distribution practices and UK guidance, information and UK legislation on these activities.The new 5th edition has been updated to incorporate changes made after the UK's exit from the European Union on the 31st January 2020.It also incorporates new guidance on pharmacovigilance for wholesalers, the naming of sites on a licence, self-inspection, and the responsible person for import.It brings together EU guidance on good distribution practice and the MHRA's expectations for compliance. There is also a new flowchart for the registration of handling active substances

Around the world, leading economies are announcing significant progress on climate change. World leaders are queuing up to proclaim their commitment to tackling the climate crisis, pointing to data that shows the progress they have made. Yet the atmosphere is still warming at a record rate, with devastating effects on poverty and precarity in the world's most vulnerable communities. Are we being deceived? Climate change is devastating the planet, and globalisation is hiding it. This book opens our eyes. Carbon colonialism explores the murky practices of outsourcing a country's environmental impact, where emissions and waste are exported from rich countries to poorer ones; a world in which corporations and countries are allowed to maintain a clean, green image while landfills in the world's poorest countries continue to expand, and droughts and floods intensify under the auspices of globalisation, deregulation and economic growth. Taking a wide-ranging, culturally engaged approach to the topic, the book shows how this is not only a technical problem, but a problem of cultural and political systems and structures - from nationalism to economic logic - deeply embedded in our society. -- .

Price and Markup Behaviour in Manufacturing examines the role that cost, competing domestic and foreign prices, domestic demand and market structure play in determining the price and markup of manufacturing firms across a range of countries and industries. Michael Olive models imperfectly competitive behaviour at the firm level, establishing logical relationships between these variables. Aggregating these relationships gives predictions for price and markup at the industry level. Empirical analysis is carried out by estimating a pricing equation for 11 industrialised countries in Asia, Europe and North America, and for 24 International Standard Industrial Classification industries from 1970 to 1991. The results exhibit a pattern of incomplete pass-through from competing foreign price into industry price and markups that are not fixed. The author illustrates that for higher levels of industry concentration cost becomes less influential in determining industry price, while the opposite is true for competing domestic and foreign prices. This comprehensive and thorough examination of the literature on pricing, the innovative model development and the comparative analysis in this study will be of great interest to government policymakers and academics wanting to keep abreast of new developments in the area of pricing and markup.

At its height British toymaking was a significant industry, with famous names such as Britains and Meccano known throughout the world. While in essence a specialised form of small-scale engineering, its products and market have always been unique, reflecting the current priorities of both parents and children. Yet, while individual toys and marques have been catalogued extensively, no previous history of toymaking as a whole exists. The British Toy Business provides a fascinating example of the development of a specific industry.
Many early early toys were home-made. From the eighteenth century, with its growing recognition of children as something other than small adults, date the beginnings of specialised toys, usually produced by small workshops and sold by street-sellers. The nineteenth century, with its industrial growth and middle-class prosperity, saw an expansion of toymaking.
The 1960s and 1970s were the most successful years of British toymaking, with companies like Lesney making record profits. Yet British toy makers failed to solve a number of fundamental problems. Following an unexpected sudden downturn in sales at a time of high interest rates, the major names in British toy making, Lesney, Airfix, Mettoy and Dunbee Combex Marx, all collapsed between 1979 and 1985, leaving the business to be dominated largely by importers.

Yang analyzes the impact of globalization on national economic boundaries, using the automobile industry to contrast three different economic systems. Corporations emerge as new players in international relations. Their corporate policies and manufacturer-supplier linkages influence the international division of labor among modern nations. Their competitive strategy affects the ability of governments to regulate national economies. Scholars in international, regional, and developmental economics will find this work provides interesting material on global competition.

Examining the dynamics of competence-building processes at the firm level, this book looks at a sample of Japanese and European companies engaged in the field of optoelectronics. The concept was derived from the notion of firm-specific competences which are closely related to the firm's intangible assets and accumulated technological bases. Several factors affect the rate and direction of competence-building, chief among them being primary markets, top management strategy and the evolution of research and development organization, and organizational learning. The book also introduces a technique to assess competences using three types of data on US patenting, scientific publications and qualitative interview data.