This book presents the theory, analysis, and design of ultra-wideband (UWB) radar and sensor systems (in short, UWB systems) and their components. UWB systems find numerous applications in the military, security, civilian, commercial and medicine fields. This book addresses five main topics of UWB systems: System Analysis, Transmitter Design, Receiver Design, Antenna Design and System Integration and Test. The developments of a practical UWB system and its components using microwave integrated circuits, as well as various measurements, are included in detail to demonstrate the theory, analysis and design technique. Essentially, this book will enable the reader to design their own UWB systems and components. In the System Analysis chapter, the UWB principle of operation as well as the power budget analysis and range resolution analysis are presented. In the UWB Transmitter Design chapter, the design, fabrication and measurement of impulse and monocycle pulse generators are covered. The UWB Receiver Design chapter addresses the design and measurement of the strobe pulse generator, sampling mixer, low-noise amplifier and synchronous sampling receiver. Next, the UWB Antenna Design chapter details the design and measurement of to two UWB antennas: the microstrip quasi-horn antenna and the UWB uniplanar antenna. The System Integration and Test chapter covers the transmission-reception test, signal processing, system integration, and evaluation of the UWB sensor. The final chapter provides a summary and conclusion of the work.

This book presents an innovative concept for the realization of sensors based on a planar metamaterial microwave array and shows their application in biomedical analysis and treatment. The sensors are able to transduce the dielectric properties of materials in their direct vicinity into an electric signal. The specific array organization permits a simultaneous analysis of several materials using a single readout signal or a relative characterization of one material where information about its spatial distribution can be extracted. Two applications of the designed sensors are described here: the first is a cytological screening using micro fluidic technology, which shows that the sensors may be integrated into lab-on-chip technologies; the second application regards the use of the sensor in both the analysis and treatment of organic tissues. The developed sensor is able not only to screen the tissues for abnormalities, but also, by changing the applied signals, to perform thermal ablation and treat the abnormalities in a highly focused way. Thus, the research described in this book represents a considerable advancement in the field of biomedical microwave sensing.

The Microwave Engineering Handbook provides the only complete reference available on microwave engineering. The three volumes of the handbook cover the entire field of microwave engineering, from basic components to system design. All entries in the handbook are written by experts in the area, bringing together an unrivalled collection of expertise on microwave technology.

This book discusses the practical aspects of electrical and thermal modeling of packages. In addition, processing concerns for plastic packaged GaAs parts are also covered. The book emphasizes low cost industry standard packages. However, the principles involved translate well to other categories of packages. Digital issues such as crosstalk are well documented in other books and are therefore not covered in detail in this text. The principles for generation of equivalent circuit package models applies to both digital and analog parts. Digital designers and packaging engineers should still find this text useful. Subtleties often overlooked by standard methods of modeling packages for digital applications are considered and will become more important to the digital packaging engineer as frequencies continue to increase. It is hoped this book will be useful to both microwave and digital integrated circuit (Ie) designers as well as packaging engineers. In the past these disciplines were distinct. Packaging engineers typically were concerned with only materials and mechanical issues of the package. As long as there was an electrical connection made from the die to the external pin, packaging engineers had the freedom to do anything they wanted between these two points. At high frequency the issues change. Packaging engineers now have to work with die level designers to either create a package that performs well at high frequencies or to use readily available low cost packages that happen to meet the needs of the application.

"Independent Variables for Optical Surfacing Systems" discusses the characterization and application of independent variables of optical surfacing systems and introduces the basic principles of surfacing technologies and common surfacing systems. All the pivotal variables influencing surface quality are analyzed; evaluation methods for surface quality, the removal capability of tool influence functions, and a series of novel optical surfacing systems are introduced. The book also particularly focuses on the multi-path mode and dwell time used for deterministic surfacing. Researchers and graduate students working in optical engineering will benefit from this book; optical engineers in the industry will also find it a valuable reference work.

Haobo Cheng is a professor at Beijing Institute of Technology.

"Modeling, Simulation, Design and Engineering of WDM Systems and Networks "provides readers with the basic skills, concepts, and design techniques used to begin design and engineering of optical communication systems and networks at various layers. The latest semi-analytical system simulation techniques are applied to optical WDM systems and networks, and a review of the various current areas of optical communications is presented. Simulation is mixed with experimental verification and engineering to present the industry as well as state-of-the-art research.

This contributed volume is divided into three parts, accommodating different readers interested in various types of networks and applications. The first part of the book presents modeling approaches and simulation tools mainly for the physical layer including transmission effects, devices, subsystems, and systems), whereas the second part features more engineering/design issues for various types of optical systems including ULH, access, and in-building systems. The third part of the book covers networking issues related to the design of provisioning and survivability algorithms for impairment-aware and multi-domain networks.

Intended for professional scientists, company engineers, and university researchers, the text demonstrates the effectiveness of computer-aided design when it comes to network engineering and prototyping.

This monograph solely presents the Fowler-Nordheim field emission (FNFE) from semiconductors and their nanostructures. The materials considered are quantum confined non-linear optical, III-V, II-VI, Ge, Te, carbon nanotubes, PtSb2, stressed materials, Bismuth, GaP, Gallium Antimonide, II-V, Bi2Te3, III-V, II-VI, IV-VI and HgTe/CdTe superlattices with graded interfaces and effective mass superlattices under magnetic quantization and quantum wires of the aforementioned superlattices. The FNFE in opto-electronic materials and their quantum confined counterparts is studied in the presence of light waves and intense electric fields on the basis of newly formulated electron dispersion laws that control the studies of such quantum effect devices. The importance of band gap measurements in opto-electronic materials in the presence of external fields is discussed from this perspective. This monograph contains 200 open research problems which form the very core and are useful for Ph. D students and researchers. The book can also serve as a basis for a graduate course on field emission from solids.

This thesis presents a groundbraking methodology for the radar international community. The detection approach introduced, namely perturbation analysis, is completey novel showing a remarkable capability of thinking outside the box. Perturbation analysis is able to push forward the performance limits of current algorithms, allowing the detection of targets smaller than the resolution cell and highly embedded in clutter. The methodology itself is extraordinary flexibe and has already been used in two other large projects, funded by the ESA (European Space Agency): M-POL for maritime surveillance, and DRAGON-2 for land classification with particular attention to forests. This book is a perfectly organised piece of work where every detail and perspective is taken into account in order to provide a comprehensive vision of the problems and solutions.

High-Frequency Characterization of Electronic Packaging will be of interest to researchers and designers of high-frequency electronic packaging. Understanding high-frequency behavior of packaging is of growing importance due to higher clock-speeds in computers and higher data transmission rates in broadband telecommunication systems. Basic knowledge of the high-frequency behavior of packaging and interconnects is, therefore, indispensable for the design of future telecommunication and computer systems. High-Frequency Characterization of Electronic Packaging gives the reader an insight into how high-frequency characterization of electronic packaging should be done and describes the problems that have to be tackled, especially in performing accurate measurements on modern IC-packages and in determination of circuit models. High-Frequency Characterization of Electronic Packaging is conceived as a comprehensive guide for the start of research and to help in performing high-frequency measurements. Important notions in high- frequency characterization such as S-parameters, calibration, probing, de-embedding and measurement-based modeling are explained. The described techniques are illustrated with several up-to-date examples.

This brief examines issues of spectrum allocation for the limited resources of radio spectrum. It uses a game-theoretic perspective, in which the nodes in the wireless network are rational and always pursue their own objectives. It provides a systematic study of the approaches that can guarantee the system's convergence at an equilibrium state, in which the system performance is optimal or sub-optimal. The author provides a short tutorial on game theory, explains game-theoretic channel allocation in clique and in multi-hop wireless networks and explores challenges in designing game-theoretic mechanisms for dynamic channel redistribution. Since designing a completely secure mechanism is extremely expensive or impossible in most of distributed autonomous systems, it is more beneficial to study misbehavior of the nodes and develop light-weighted game-theoretic channel allocation mechanisms. With a mix of theoretical and hands-on information, the brief traces the concepts of game theory, the current state of spectrum allocation in wireless networks and future competition for resources. Thorough yet accessible, the content is ideal for researchers and practitioners working on spectrum redistribution. It is also a helpful resource for researchers and advanced-level students interested in game theory and wireless communications.

This book on pressure-induced phase transitions in AB2X4 chalcogenide compounds deals with one important AmBnXp material. The interest in these materials is caused by their properties. The results are discussed for three main groups of structural families: cubic-spinel structures, defective tetragonal structures, and other structures like layered and wurtzite-type modifications. A systematic analysis of the behavior of cubic (spinel), tetragonal (defect chalcopyrites and stannites) and other crystal modifications of AB2X4 compounds under hydrostatic pressure is performed. The behavior of AIIAl2S4, AIIGa2S4, AIIAl2Se4 and AIIGa2Se4 compounds with defective tetragonal structures, compounds with layered and wurtzite structures under hydrostatic pressure and the pressure dependence of the band gap, lattice parameters, interatomic distances, vibrational modes and pressure-induced phase transitions is discussed. Many of these compounds, except oxide spinels, undergo a pressure-induced phase transition towards the rocksalt-type structure. The phase transition is preceded by disorder in the cation sublattice. The dependence of the transition pressure to the rocksalt-type structure as a function of the compound ionicity and the size criterion is analyzed. At high pressures, all ordered-vacancy compounds are found to exhibit a band anticrossing between several conduction bands that leads to a strong decrease of its pressure coefficient and consequently to a strong non-linear pressure dependence of the direct bandgap energy. Theoretical studies of phase transitions in several ordered-vacancy compounds reveal that the existence of ordered vacancies alter the cation-anion bond distances and their compressibilities. The book is written for students, Ph D. students and specialists in materials science, phase transitions and new materials.

As the theoretical foundations of multiple-antenna techniques evolve and as these multiple-input multiple-output (MIMO) techniques become essential for providing high data rates in wireless systems, there is a growing need to understand the performance limits of MIMO in practical networks. To address this need, "MIMO Communication for Cellular Networks "presents a systematic description of MIMO technology classes and a framework for MIMO system design that takes into account the essential physical-layer features of practical cellular networks.

In contrast to works that focus on the theoretical performance of abstract MIMO channels, "MIMO Communication for Cellular Networks "emphasizes the practical performance of realistic MIMO systems. A unified set of system simulation results highlights relative performance gains of different MIMO techniques and provides insights into how best to use multiple antennas in cellular networks under various conditions.

"MIMO Communication for Cellular Networks" describes single-user, multiuser, network MIMO technologies and system-level aspects of cellular networks, including channel modeling, resource scheduling, interference mitigation, and simulation methodologies. The key concepts are presented with sufficient generality to be applied to a wide range of wireless systems, including those based on cellular standards such as LTE, LTE-Advanced, WiMAX, and WiMAX2. The book is intended for use by graduate students, researchers, and practicing engineers interested in the physical-layer design of state-of-the-art wireless systems.

Optoelectronics--technology based on applications light such as micro/nano quantum electronics, photonic devices, laser for measurements and detection--has become an important field of research. Many applications and physical problems concerning optoelectronics are analyzed in Optical Waveguiding and Applied Photonics. The book is organized in order to explain how to implement innovative sensors starting from basic physical principles. Applications such as cavity resonance, filtering, tactile sensors, robotic sensor, oil spill detection, small antennas and experimental setups using lasers are analyzed. Innovative materials such as nanocomposites are characterized, designed, and applied in order to provide new ideas about detection principles. As with many electric circuitries, light applications and architectures suffer from noising due to physical and transmission connections. The book illustrates some examples for practical issues. The theory and the nanotechnology facilities provide important tools for researchers working with sensing applications.

Photodynamic Therapy: From Theory to Application brings attention to an exceptional treatment strategy, which until now has not achieved the recognition and breadth of applications it deserves. The authors, all experts and pioneers in their field, discuss the history and basic principles of PDT, as well as the fundamentals of the theory, methods, and instrumentation of clinical diagnosis and treatment of cancer. Non-oncological applications such as the use of PDT in control of parasites and noxious insects are also discussed. This book serves as a standard reference for researchers and students at all levels, clinical specialists interested in the topic and those in industry exploring new areas for development. A comprehensive exposition of both the theory and application of PDT, this book fills the gaps in the current literature by bringing together both basic understanding of the process of PDT and an expanded vision of its applications.

The thermal processing of materials ranges from few fem to seconds by Swift Heavy Ion Implantation to about one second using advanced Rapid Thermal Annealing. This book offers after an historical excursus selected contributions on fundamental and applied aspects of thermal processing of classical elemental semiconductors and other advanced materials including nanostructures with novel optoelectronic, magnetic, and superconducting properties. Special emphasis is given on the diffusion and segregation of impurity atoms during thermal treatment. A broad range of examples describes the solid phase and/or liquid phase processing of elemental and compound semiconductors, dielectric composites and organic materials.

This 6th edition of "Tools of Radio Astronomy", the most used introductory text in radio astronomy, has been revised to reflect the current state of this important branch of astronomy. This includes the use of satellites, low radio frequencies, the millimeter/sub-mm universe, the Cosmic Microwave Background and the increased importance of mm/sub-mm dust emission. Several derivations and presentations of technical aspects of radio astronomy and receivers, such as receiver noise, the Hertz dipole and beam forming have been updated, expanded, re-worked or complemented by alternative derivations. These reflect advances in technology. The wider bandwidths of the Jansky-VLA and long wave arrays such as LOFAR and mm/sub-mm arrays such as ALMA required an expansion of the discussion of interferometers and aperture synthesis. Developments in data reduction algorithms have been included. As a result of the large amount of data collected in the past 20 years, the discussion of solar system radio astronomy, dust emission, and radio supernovae has been revisited. The chapters on spectral line emission have been updated to cover measurements of the neutral hydrogen radiation from the early universe as well as measurements with new facilities. Similarly the discussion of molecules in interstellar space has been expanded to include the molecular and dust emission from protostars and very cold regions. Several worked examples have been added in the areas of fundamental physics, such as pulsars. Both students and practicing astronomers will appreciate this new up-to-date edition of Tools of Radio Astronomy.

This book deals with the latest achievements in the field of ferroelectric domain engineering and characterization at micro- and nano-scale dimensions and periods. The book collects the results obtained in the last years by world scientific leaders in the field, thus providing a valid and unique overview of the state-of-the-art and also a view to future applications of those engineered and used materials in the field of photonics. The second edition covers the major aspects of ferroelectric domain engineering and combines basic research and latest updated applications such as challenging results by introducing either new as well as extended chapters on Photonics Crystals based on Lithium Niobate and Lithium Tantalate crystals; generation, visualization and controlling of THz radiation; latest achievements on Optical Parametric Oscillators for application in precise spectroscopy. Further more recent advancements in characterization by probe scanning microscopy and optical methods with device and technological orientation. A state-of-the-art report on periodically poled processes and their characterization methods are provided on different materials (LiNbO3, KTP) furnishing update research on ferroelectric crystal by extending materials research and applications.

Next generation optical communication systems will have to transport a significantly increased data volume at a reduced cost per transmitted bit. To achieve these ambitious goals optimum design is crucial in combination with dynamic adaptation to actual traffic demands and improved energy efficiency. In the first part of the book the author elaborates on the design of optical transmission systems. Several methods for efficient numerical simulation are presented ranging from meta-model based optimization to parallelization techniques for solving the nonlinear Schroedinger equation. Furthermore, fast analytical and semi-analytical models are described to estimate the various degradation effects occurring on the transmission line. In the second part of the book operational aspects of optical networks are investigated. Physical layer impairment-aware routing and regenerator placement are studied. Finally, it is analyzed how the energy efficiency of a multi-layer optical core network can be increased by dynamic adaptation to traffic patterns changing in the course of the day.

Authored by the developer of dressed photon science and technology as well as nanophotonics, this book outlines concepts of the subject using a novel theoretical framework that differs from conventional wave optics. It provides a quantum theoretical description of optical near fields and related problems that puts matter excitation such as electronic and vibrational ones on an equal footing with photons. By this description, optical near fields are interpreted as quasi-particles and named dressed photons which carry the material excitation energy in a nanometric space. The author then explores novel nanophotonic devices, fabrications, and energy conversion based on the theoretical picture of dressed photons. Further, this book looks at how the assembly of nanophotonic devices produces information and communication systems. Dressed photon science and technology is on its way to revolutionizing various applications in devices, fabrications, and systems. Promoting further exploration in the field, this book presents physically intuitive concepts, theories, and technical details for students, engineers, and scientists engaged in research and development in dressed photon science and technology as well as nanophotonics.

1.1 COMMUNICATION WHILE TRAVELLING The pace of our daily life has been increasing for several decades. Our needs have multiplied as new products have appeared and then been replaced after a few years, or even months, of existence by a more fashionable product or one of higher performance. The life cycles of the technologies used in consumer and professional electronic products are also becoming shorter. This acceleration is an inherent fact of our consumer society. and the relationship between people and machines are Lifestyles due to the multiplicity of ephemeral consumer products. Objects changing no longer have a history; they are merely tools which fulfil a predetermined function. Personal portable products are of a new type which has appeared among pens, wallets, these impersonal objects. This category includes watches, handbags, calculators, portable radios and pocket telephones. As these products for the pocket are carried on one's person, they belong in a very personal way and have, therefore, a speciftc identity corresponding to the image which they are given. In the evolution of lifestyles, the explosive increase of travel and time management are major factors. The pocket telephone is, therefore, remark able for two reasons. It is not only an impersonal tool or product but is also very much a personal portable product. The possibility of distant com munication while travelling, being able to call or be called at will anywhere at any time permits the pocket telephone to be often considered as a desirable, almost magic, personal item."

Electroacoustic transducers (EAT) are devices, which transform electric energy to energy of acoustic fluctuations. Principles of action, design of transducers for work in air and water as well as for non-destructive control are described in the book. New technologies of designing EAT, not only expanding designing possibilities, are described. They also allow to create transducers with improved characteristics. In particular, methods to increase target capacity (sound pressure), decrease working (resonant) frequency of transducers and expand frequencies of projectors and sound receivers are developed. Methods and control units of transducers in batch production of transducers are described, too.

A detailed study of the science, engineering and applications of terahertz technology, based on room-temperature solid-state devices, which are seen as the key technology for wider applications in this frequency range. The relative merits of electronic and optical devices are discussed and new device principles identified. Issues of terahertz circuit design, implementation and measurement are complemented by chapters on current and future applications in communications, sensing and remote surveillance. Audience: The unique coverage of all aspects of terahertz technology will appeal to both new and established workers in the field, as well as providing a survey for the interested reader.

This book covers the latest advances in the techniques employed to manage the THz radiation and its potential uses. It has been subdivided in three sections: THz Detectors, THz Sources, Systems and Applications. These three sections will allow the reader to be introduced in a logical way to the physics problems of sensing and generation of the terahertz radiation, the implementation of these devices into systems including other components and finally the exploitation of the equipment for real applications in some different field. All of the sections and chapters can be individually addressed in order to deepen the understanding of a single topic without the need to read the whole book. The THz Detectors section will address the latest developments in detection devices based on three different physical principles: photodetection, thermal power detection, rectification. The THz Sources section will describe three completely different generation methods, operating in three separate scales: quantum cascade lasers, free electron lasers and non-linear optical generation. The Systems and Applications section will take care of introducing many of the aspects needed to move from a device to an equipment perspective: control of terahertz radiation, its use in imaging or in spectroscopy, potential uses in security, and will address also safety issues. The text book is at a level appropriate to graduate level courses up to researchers in the field who require a reference book covering all aspects of terahertz technology.

Low Power Consumption is one of the critical issues in the performance of small battery-powered handheld devices. Mobile terminals feature an ever increasing number of wireless communication alternatives including GPS, Bluetooth, GSM, 3G, WiFi or DVB-H. Considering that the total power available for each terminal is limited by the relatively slow increase in battery performance expected in the near future, the need for efficient circuits is now critical. This book presents the basic techniques available to design low power RF CMOS analogue circuits. It gives circuit designers a complete guide of alternatives to optimize power consumption and explains the application of these rules in the most common RF building blocks: LNA, mixers and PLLs. It is set out using practical examples and offers a unique perspective as it targets designers working within the standard CMOS process and all the limitations inherent in these technologies.

This lecture presents a modern approach for the computation of Mathieu functions. These functions find application in boundary value analysis such as electromagnetic scattering from elliptic cylinders and flat strips, as well as the analogous acoustic and optical problems, and many other applications in science and engineering. The authors review the traditional approach used for these functions, show its limitations, and provide an alternative "tuned" approach enabling improved accuracy and convergence. The performance of this approach is investigated for a wide range of parameters and machine precision. Examples from electromagnetic scattering are provided for illustration and to show the convergence of the typical series that employ Mathieu functions for boundary value analysis.