High-Temperature Cuprate Superconductors provides an up-to-date and comprehensive review of the properties of these fascinating materials. The essential properties of high-temperature cuprate superconductors are reviewed on the background of their theoretical interpretation. The experimental results for structural, magnetic, thermal, electric, optical and lattice properties of various cuprate superconductors are presented with respect to relevant theoretical models. A critical comparison of various theoretical models involving strong electron correlations, antiferromagnetic spin fluctuations, phonons and excitons provides a background for understanding of the mechanism of high-temperature superconductivity. Recent achievements in their applications are also reviewed. A large number of illustrations and tables gives valuable information for specialists. A text-book level presentation with formulation of a general theory of strong-coupling superconductivity will help students and researches to consolidate their knowledge of this remarkable class of materials.

This book represents the proceedings of the First International Conference on Frontiers of Polymer Research held in New Delhi, India during January 20-25, 1991. Polymers have usually been perceived as substances to be used in insulations, coatings, fabrics, and structural materials. Defying this classical view, polymers are emerging as a new class of materials with potential applications in many new technologies. They also offer challenging opportunities for fundamental research. Recognizing a tremendous growth in world wide interest in polymer research and technology, a truly global "1st International Conference on Frontiers of Polymer Research" was organized by P. N. Prasad (SUNY at Buffalo), F. E. Karasz (University of Massachusetts) and J. K. Nigam (Shriram Institute for Industrial Research, India). The 225 participants represented 25 countries and a wide variety of academic, industrial and government groups. The conference was inaugurated by the Prime Minister of India, Mr. Chandra Shekhar and had a high level media coverage. The focus of the conference was on three frontier areas of polymer research: (i) Polymers for photonics, where nonlinear optical properties of polymers show great promise, (ii) Polymers for electronics, where new conduction mechanisms and photophysics have generated considerable enthusiasm and (iii) High performance polymers as new advanced polymers have exhibited exceptionally high mechanical strength coupled with light weight.

The Workshop on Physics and Application of Non-crystalline Semiconductors in Optoelectronics was held from 15 to 17 October 1996 in Chisinau. republic of Moldova and was devoted to the problems of non-crystalline semiconducting materials. The reports covered two mjlin topics: theoretical basis of physics of non -crystalline materials and experimental results. In the framework of these major topics there were treated many subjects. concerning the physics of non-crystalline semiconductors and their specific application: -optical properties of non-crystalline semiconductors; -doping of glassy semiconductors and photoinduced effects in chalcogenide glasses and their application for practical purposes; -methods for investigation of the structure in non-crystalline semiconductors -new glassy materials for IR trasmittance and optoelectronics. Reports and communications were presented on various aspects of the theory. new physical principles. studies of the atomic structure. search and development of optoelectronics devices. Special attention was paid to the actual subject of photoinduced transformations and its applications. Experimental investigations covered a rather wide spectrum of materials and physical phenomena. As a novel item it is worth to mention the study of nonlinear optical effects in amorphous semiconducting films. The third order optical non linearities. fast photoinduced optical absorption and refraction. acusto-optic effects recently discovered in non-crystalline semiconductors could potentially be utilised for optical signal processing. The important problems of photoinduced structural transformations and related phenomena. which are very attractive and actual both from the scientific and practical points of view. received much attention in discussions at the conference."

It is not good to have zeal without knowledge * . . . Book of Proverbs This volume constitutes the proceedings of the Third International Workshop on Materials Processing at High Gravity. It offers the latest results in a new field with immense potential for commercialization, making this book a vital resource for research and development professionals in industry, academia and government. We have titled the proceedings Centrifugal Materials Processing to emphasize that centrifugation causes more than an increase in acceleration. It also introduces the Coriolis force and a gradient of acceleration, both of which have been discovered to play important roles in materials processing. The workshop was held June 2-8, 1996 on the campus of Clarkson University in Potsdam, New York, under the sponsorship of Corning Corporation and the International Center for Gravity Materials Science and Applications. The meeting was very productive and exciting, with energetic discussions of the latest discoveries in centrifugal materials processing, continuing the atmosphere of the first workshop held in 1991 at Dubna (Russia) and the second workshop held in 1993 in Potsdam, New York. Results and research plans were presented for a wide variety of centrifugal materials processing, including directional solidification of semiconductors, crystallization of high Tc superconductors, growth of diamond thin films, welding, alloy casting, solution behavior and growth, protein crystal growth, polymerization, and flow behavior. Also described were several centrifuge facilities that have been constructed for research, with costs beginning at below $1000.

Intensive research on zeolites, during the past thirty years, has resulted in a deep understanding of their chemistry and in a true zeolite science, including synthesis, structure, chemical and physical properties, and catalysis. These studies are the basis for the development and growth of several industrial processes applying zeolites for selective sorption, separation, and catalysis. In 1983, a NATO Advanced Study Institute was organized in Alcabideche (portugal) to establish the State-of-the-Art in Zeolite Science and Technology and to contribute to a better understanding of the structural properties of zeolites, the configurational constraints they may exert, and their effects in adsorption, diffusion, and catalysis. Since then, zeolite science has witnessed an almost exponential growth in published papers and patents, dealing with both fundamentals issues and original applications. The proposal of new procedures for zeolite synthesis, the development of novel and sophisticated physical techniques for zeolite characterization, the discovery of new zeolitic and related microporous materials, progresses in quantum chemistry and molecular modeling of zeolites, and the application of zeolites as catalysts for organic reactions have prompted increasing interest among the scientific community. An important and harmonious interaction between various domains of Physics, Chemistry, and Engineering resulted therefrom.

Microwave Physics and Techniques discusses the modelling and application of nonlinear microwave circuits and the problems of microwave electrodynamics and applications of magnetic and high Tc superconductor structures. Aspects of advanced methods for the structural investigation of materials and of MW remote sensing are also considered. The dual focus on both HTSC MW device physics and MW excitation in ferrites and magnetic films will foster the interaction of specialists in these different fields.

Progress in the development of surgical implant materials has been hindered by the lack of basic information on the nature of the tissues, organs and systems being repaired or replaced. Materials' properties of living systems, whose study has been conducted largely under the rubric of tissue mechanics, has tended to be more descriptive than quantitative. In the early days of the modern surgical implant era, this deficiency was not critical. However, as implants continue to improve and both longer service life and higher reliability are sought, the inability to predict the behavior of implanted manufactured materials has revealed the relative lack of knowledge of the materials properties of the supporting or host system, either in health or disease. Such a situation is unacceptable in more conventional engineering practice: the success of new designs for aeronautical and marine applications depends exquisitely upon a detailed, disciplined and quantitative knowledge of service environments, including the properties of materials which will be encountered and interacted with. Thus the knowledge of the myriad physical properties of ocean ice makes possible the design and development of icebreakers without the need for trial and error. In contrast, the development period for a new surgical implant, incorporating new materials, may well exceed a decade and even then only short term performance predictions can be made.

Lo, soul! seest thou not God's purpose from the first? The earth to be spann'd, connected by net-work From Passage to India! Walt Whitman, "Leaves of Grass", 1900. The Internet is growing at a tremendous rate today. New services, such as telephony and multimedia, are being added to the pure data-delivery framework of yesterday. Such high demands on capacity could lead to a "bandwidth-crunch" at the core wide-area network resulting in degra dation of service quality. Fortunately, technological innovations have emerged which can provide relief to the end-user to overcome the In ternet's well-known delay and bandwidth limitations. At the physical layer, a major overhaul of existing networks has been envisaged from electronic media (such as twisted-pair and cable) to optical fibers - in the wide area, in the metropolitan area, and even in the local area set tings. In order to exploit the immense bandwidth potential of the optical fiber, interesting multiplexing techniques have been developed over the years. Wavelength division multiplexing (WDM) is such a promising tech nique in which multiple channels are operated along a single fiber si multaneously, each on a different wavelength. These channels can be independently modulated to accommodate dissimilar bit rates and data formats, if so desired. Thus, WDM carves up the huge bandwidth of an optical fiber into channels whose bandwidths (1-10 Gbps) are compati ble with peak electronic processing speed.

This 6th International Symposium on Thermal Expansion, the first outside the USA, was held on August 29-31, 1977 at the Gull Harbour Resort on Hecla Island, Manitoba, Canada. Symposium Chairman was Ian D. Peggs, Atomic Energy of Canada Limited, and our continuing sponsor was CINDAS/Purdue University. We made considerable efforts to broaden the base this year to include more users of expansion data but with little success. We were successful, however, in establishing a session on liquids, an area which is receiving more attention as a logical extension to the high-speed thermophysical property measurements on materials at temperatures close to their melting points. The Symposium had good international representation but the overall attendance was, disappointingly, relatively low. Neverthe less, this enhanced the informal atmosphere throughout the meeting with a resultant frank exchange of information and ideas which all attendees appreciated. A totally new item this year was the presentation of a bursary to assist an outstanding research student to attend the Symposium. We were delighted to welcome Mr. Benedick Fraass from the Univer sity of Illinois to the Symposium, and he responded by making an informal presentation on the topic of his research. We hope this feature will continue. Previous Symposia in the series were: DATE SPONSOR LOCATION CHAIRMEN September 18-20 Gaithersburg, R.K. Kirby Natl. Bureau of 1968 Maryland Standards P.S. Gaal Westinghouse Astronuclear Lab. June 10-12 Santa Fe, R.O. Simmons Materials Res. Lab."

These volumes, 9 and 10, of Fracture Mechanics of Ceramics constitute the proceedings of an international symposium on the fracture mechanics of ceramic materials held at the Japan Fine Ceramics Center, Nagoya, Japan on July 15, 16, 17, 1991. These proceedings constitute the fifth pair of volumes of a continuing series of conferences. Volumes 1 and 2 were from the 1973 symposium, volumes 3 and 4 from a 1977 symposium, and volumes 5 and 6 from a 1981 symposium all of which were held at The Pennsylvania State University. Volumes 7 and 8 are from the 1985 symposium which was held at the Virginia Polytechnic Institute and State University. The theme ofthis conference, as for the previous four, focused on the mechanical behavior ofceramic materials in terms of the characteristics of cracks, particularly the roles which they assume in the fracture processes and mechanisms. The 82 contributed papers by over 150 authors and co-authors represent the current state of that field. They address many of the theoretical and practical problems ofinterest to those scientists and engineers concerned with brittle fracture.

In recent years remarkable progress has been made in the development of materials for ultrasonic transducers. There is a continuing trend towards increasingly higher frequency ranges for the application of ultrasonic trans ducers in modern technology. The progress in this area has been especially rapid and articles and papers on the subject are scattered over numerous technical and scientific journals in this country and abroad. Although good books have appeared on ultrasonics in general and ultrasonic transducers in particular in which, for obvious reasons, materials play an important part, no comprehensive treatise is available that represents the state-of-the-art on modern ultrasonic transducer materials. This book intends to fill a need for a thorough review of the subject. Not all materials are covered of which, theoretically, ultrasonic trans ducers could be made but those that are or may be of technical impor tance and which have inherent electro acoustic transducer properties, i.e., materials that are either magnetostrictive, electrostrictive, or piezoelectric. The book has been devided into three parts which somewhat reflect the historic development of ultrasonic transducer materials for important tech nical application. Chapter 1 deals with magnetostrictive materials, magnetostrictive met als and their alloys, and magnetostrictive ferrites (polycrystalline ceramics). The metals are useful especially in cases where ruggednes of the transducers are of overriding importance and in the lower ultrasonic frequency range."

Polymer composites represent materials of great and of continuously growing importance. Their potential for application appears to be limitless. They have been the subject of numerous studies both at academic and industrial levels. Much progress has been made in the incisive formulation of composites; sophisticated methods of property evaluation have been developed in the past decade and many, largely empirical solutions have been proposed to resolve the problem of their long-term performance under typical conditions of use (i. e. the use of silane or titane coupling agents to enhance adhesion within composite materials). Assuredly one of the most essential factors in the performance of these systems is the condition of the interface and interphase among the constituents of a given system. It has become clear that it is the interface/interphase, and the interactions which take place in this part of a system, which determine to a significant degree the initial properties of the material. In order to achieve leadership in the formulation and application of polymer composites, it is evident that in depth understanding of interfacial and interphase phenomena becomes a prerequisite.

Theoretical and experimental work on solids with low-dimensi onal cooperative phenomena has been rather explosively expanded in the last few years, and it seems to be quite fashionable to con tribute to this field, especially to the problem of one-dimensional metals. On the whole, one could divide the huge amount of recent investigations into two parts although there is much overlap bet ween these regimes, namely investigations on magnetic exchange interactions constrained to mainly one or two dimensions and, secondly, work done on Id metallic solids or linear chain compounds with Id delocalized electrons. There is, of course, overlap from one extreme case to the other with these solids and in some rare cases both phenomena are studied on one and the same crystal. In fact, however, most of the scientific groups in this area could be associated roughly with one of these categories and, in addition, a separation between theoreticians and experimentalists in each of these groups leads to a further splitting of interests although many theories about these solids have been tested by experimenta lists. Nevertheless, more cooperation and understanding between scientists working on low-dimensional cooperative phenomena should appreciably stimulate further development. With a better inderdis ciplinary understanding, new ideas could possibly help chemists in synthesizing tailor-cut solids. This would in return give experi mentalists new phenomena to examine and finally would stimulate new theoretical work."

This monograph, which is the outcome of the ASI on High Pressure Chemistry, Biochemistry, and Materials Science, illustrates new developments in the field of high pressure science. In fact, for chemists, biochemists, and materials scientists, pressure as an experimental variable represents a tool which provides unique information about systems of materials studied. It is interesting to note how the growth of the high pressure field is also reflected in the content of the recent ASI's dealing with this field. The ASI High Pressure Chemistry held in 1977 was followed by the ASI High Pressure Chemistry and Biochemistry held in 1986, and the coverage of the present ASI also includes applications to materials science. In view of the teaching character of the ASI, it is natural that main contributions to this volume present overviews of the different subfields or applications of high pressure research. In contrast, contributed papers offer more specialized aspects of various high pressure studies. The various contributions to this volume make clear the impressive range of fundamental and applied problems that can be studied by high pressure techniques, and also point towards a major growth of high pressure science and technology in the near future. This ASI focused mainly on advances achieved in the six years since the previous ASI devoted to the high pressure field. The organization of this volume is as follows.

Building on the extensive coverage of the first volume, Volume 2 focuses on the fundamentals of measurements and computational techniques that will aid researchers in the construction and use of measurement devices.

Summary of the recent progress in ceramics research. Several novel concepts for materials selection and microstructural design are presented, as are experimental results that substantiate the ideas.

It is almost self-evident that surface and interface science, coupled with the electronic structure of bulk materials, playa fundamental role in the understanding of materials properties. If one is to have any hope of understanding such properties as catalysis, microelectronic devices and contacts, wear, lubrication, resistance to corrosion, ductility, creep, intragranular fracture, toughness and strength of steels, adhesion of protective oxide scales, and the mechanical properties of ceramics, one must address a rather complex problem involving a number of fundamental parameters: the atomic and electronic structure, the energy and chemistry of surface and interface regions, diffusion along and across interfaces, and the response of an interface to stress. The intense need to gain an understanding of the properties of surfaces and interfaces is amply attested to by the large number of conferences and workshops held on surface and interface science. Because of this need, the fields of surface and interface science have been established in their own right, although their development presently lags behind that of general materials science associated with bulk, translationally invariant systems. There are good reasons to expect this situation to change rather dramatically in the next few years. Existing techniques for investigating surfaces and interfaces have reached maturity and are increasingly being applied to systems of practical relevance. New techniques are still being created, which drastically widen the scope of applicability of surface and interface studies. On the experimental side, new microscopies are bearing fruit.

Approximately half of the world production of the petrochemical industry (more than 100 million tonnes) is in the form of polymers, yet it would probably surprise most people to learn how much their lifestyle depends on polymers ranging, as they do, from detergents, kitchenware and electrical appliances to furnishings and a myriad other domestic goods. Still less are they likely to be aware of the extensive part they play in engineering applications for mechanical machine components and advanced high performance aircraft. This versatility derives from the fact that polymeric materials are made up of a range of molecules of varying length, whose properties are related to molecular structure and the proportions of the chains in the mixture. For example, polypropylene is a commodity polymer which is produced in hun dreds of different grades to meet specific market requirements. This depends on the catalyst as well as the operating conditions and reactor design. A major area for growth is in substituting polymers for conventional materials such as ceramics and metals. Not only can they match these materials in terms of mechanical strength and robustness but they have very good resistance to chemical attack. Polyamides, for example, are widely used for car bumpers and new polymers are being developed for engine manifolds and covers. In 1993 there is, typically, 100 kg of various polymers used in cars and this is continually increasing, giving a net weight reduction and hence better fuel economy."

The microanalytical technique of atom probe tomography (APT) permits the spatial coordinates and elemental identities of the individual atoms within a small volume to be determined with near atomic resolution. Therefore, atom probe tomography provides a technique for acquiring atomic resolution three dimensional images of the solute distribution within the microstructures of materials. This monograph is designed to provide researchers and students the necessary information to plan and experimentally conduct an atom probe tomography experiment. The techniques required to visualize and to analyze the resulting three-dimensional data are also described. The monograph is organized into chapters each covering a specific aspect of the technique. The development of this powerful microanalytical technique from the origins offield ion microscopy in 1951, through the first three-dimensional atom probe prototype built in 1986 to today's commercial state-of-the-art three dimensional atom probe is documented in chapter 1. A general introduction to atom probe tomography is also presented in chapter 1. The various methods to fabricate suitable needle-shaped specimens are presented in chapter 2. The procedure to form field ion images of the needle-shaped specimen is described in chapter 3. In addition, the appearance of microstructural features and the information that may be estimated from field ion microscopy are summarized. A brief account of the theoretical basis for processes of field ionization and field evaporation is also included.

Silicon, as an electronic substrate, has sparked a technological revolution that has allowed the realization of very large scale integration (VLSI) of circuits on a chip. These 6 fingernail-sized chips currently carry more than 10 components, consume low power, cost a few dollars, and are capable of performing data processing, numerical computations, and signal conditioning tasks at gigabit-per-second rates. Silicon, as a mechanical substrate, promises to spark another technological revolution that will allow computer chips to come with the eyes, ears, and even hands needed for closed-loop control systems. The silicon VLSI process technology which has been perfected over three decades can now be extended towards the production of novel structures such as epitaxially grown optoelectronic GaAs devices, buried layers for three dimensional integration, micromechanical mechanisms, integrated photonic circuits, and artificial neural networks. This book begins by addressing the processing of electronic and optoelectronic devices produced by using lattice mismatched epitaxial GaAs films on Si. Two viable technologies are considered. In one, silicon is used as a passive substrate in order to take advantage of its favorable properties over bulk GaAs; in the other, GaAs and Si are combined on the same chip in order to develop IC configurations with improved performance and increased levels of integration. The relationships between device operation and substrate quality are discussed in light of potential electronic and optoelectronic applications.

Number 25 of this acclaimed series breaks new ground with articles on charge transfer across liquid-liquid interfaces, electrochemical techniques to study hydrogen ingress in metals, and electrical breakdown of liquids. Also included are articles on the measurement of corrosion and ellipsometry, bringing these older subjects up to date.

Liquid metal technology has been the subject of an impetuous development in the recent decades, mainly due to the application of liquid met als in nuclear techniques. The technological development has been supported by studies of the basic physical-chemical properties of liquid metals: One major concern is the material behaviour in contact with the liquid metals, corrosion and the possible deterioration of metallic and ceramic materials which are in use as constructional or functional materials in such systems. Since the corrosion is in many cases not only a simple dissolution process, the chemical background of such processes had to be studied. Such studies included the determination of solubilities of metals and non-metals in liquid metals, the measurement of thermodynamic data of dissolved materials and of chemical equilibria. Several formerly unknown chemical compounds are formed in liquid metal~ lnd are only stable in this environment. The research and deve\opment devoted to the fission reactor techniques were more or less completed in several countries, further work is in progress in some countries in which the interest in fast breeder reactors arose recently. Even the worldwide program on fusion reactor technology is related to liquid metals, and severallaboratories are now contributing to this new technology.

Computer Simulation in Chemical Physics contains the proceedings of a NATO Advanced Study Institute held at CORISA, Alghero, Sardinia, in September 1992. In the five years that have elapsed since the field was last summarized there have been a number of remarkable advances which have significantly expanded the scope of the methods. Good examples are the Car--Parrinello method, which allows the study of materials with itinerant electrons; the Gibbs technique for the direct simulation of liquid--vapor phase equilibria; the transfer of scaling concepts from simulations of spin models to more complex systems; and the development of the configurational--biased Monte-Carlo methods for studying dense polymers. The field has also been stimulated by an enormous increase in available computing power and the provision of new software. All these exciting developments, an more, are discussed in an accessible way here, making the book indispensable reading for graduate students and research scientists in both academic and industrial settings.

From its early days in the 1950s, the electron microanalyzer has offered two principal ways of obtaining x-ray spectra: wavelength dispersive spectrometry (WDS), which utilizes crystal diffraction, and energy dispersive spectrometry (EDS), in which the x-ray quantum energy is measured directly. In general, WDS offers much better peak separation for complex line spectra, whereas EDS gives a higher collection efficiency and is easier and cheaper to use. Both techniques have undergone major transformations since those early days, from the simple focusing spectrometerand gas proportional counter of the 1950s to the advanced semiconductor detectors and programmable spectrometersoftoday. Becauseofthesedevelopments, thecapabilities and relative merits of EDS and WDS techniques have been a recurring feature of microprobeconferences for nearly40 years, and this volume bringstogetherthepapers presented at the Chuck Fiori Memorial Symposium, held at the Microbeam Analysis Society Meeting of 1993. Several themes are apparent in this rich and authoritative collection of papers, which have both a historical and an up-to-the-minute dimension. Light element analysis has long been a goal of microprobe analysts since Ray Dolby first detected K radiation with a gas proportional counter in 1960. WDS techniques (using carbon lead stearate films) were not used for this purpose until four years later. Now synthetic multilayers provide the best dispersive elements for quantitative light element analy sis-still used in conjunction with a gas counter.

The Handbook of Modern Ferromagnetic Materials is an up-to-the-minute compendium of all ferromagnetic materials, metallic and ceramic, intended for electrical and electronic applications. Coverage of the newest and most economically important materials (soft ferrites, the rare-earth magnet alloys, amorphous and nanocrystalline alloys) is extensive. The distinctive feature of this book is its correlation of basic material properties (metallurgical and ceramic) with their magnetic characteristics and eventually to the choice in an application. Unique to this work is information on the many magnetic components into which these materials can be formed and the pertinent design data. Another useful feature is the criteria (quality, stability and economic) for selection of a particular material. Included are the mechanical, thermal and physical properties of these materials. The author not only presents the latest information from suppliers and magnetism conferences but includes a section on new materials (e.g. colossal magnetostriction materials) being developed but not yet available.The format is arranged according to frequency of operation, which turns out to be almost concurrent with the application. Thus, direct current applications are considered first, then low frequency line power, followed by applications at increasing frequencies up to microwave uses. This anthology of ferromagnetic materials is an essential reference work for electrical and electronic designers and materials scientists. It may also serve as a text for a magnetic materials course and as a materials guide for purchasing agents and technical executives.