From the Author's Preface
Ceramic sensors have been in use for more than thirty years. Since ceramics exhibit a number of specific characteristics that enable their cost to become lower and their reliability to increase, they have occupied a significant position in sensor technology. This is why many companies and universities have directed their efforts towards investigating and developing new ceramic sensors and expanding their areas of application.
To the best of our knowledge.., there has been] no book treating different sensors on the basis of their common physical and chemical properties, technological principles, and applications. This book is] a detailed survey of ceramic sensors and a generalization of the results achieved in this field so far. Ceramic sensors for different physical quantities are discussed without going too deep into theory...
The concept of ceramic sensors includes all sensors that are produced using ceramic technology. It also covers thick film sensors, since from a structural and technological point of view, they can be regarded as a variety of ceramic sensors. The subject of scientific research in this book is humidity, gas. temperature, and pressure sensors on the basis of semiconductor and dielectric ceramic materials and solid electrolytes.
Special attention is paid to the physical and chemical, as well as the technological, bases of ceramic sensors, their classification, the types of materials used..., the methods of controlling their parameters and characteristics, the areas of application, and the electric circuits for connecting the sensors.

Techniques and Topics in Flow Measurement covers the applications and techniques of flow measurement. This definitive book provides guidelines for choosing appropriate techniques and assuring valid measurements as well as describes methods for treatment of calibration data in fluid flow under various conditions. The book also covers three systems of units: the SI system, the English Absolute Dimensional system, and the English Engineering system. Commonly used - and often misused - variables such as force, weight, and pressure are defined, and the relationships between the systems for these common variables are summarized.
One of the many unique features of Techniques and Topics in Flow Measurement is the number of ready-to-use tables included throughout the text. Tables are provided for such commonly encountered variables as the saturation vapor pressure of water; the composition of dry air; the compressibility factor for air; air-free and air-saturated water density; viscosity of dry air, nitrogen, and other gases; and specific heat/specific volume ratios for dry air, water vapor, and moist air. Another unique feature of this book is the number of highly relevant examples. The author includes examples/exercises that demonstrate applications for density calculations; water vapor mixing ratio determination; gas viscosity interpolation; NIST guideline applications; buoyancy corrections; and more.

Explaining the symbology of dimensioning and tolerancing and introducing a step-by-step system for geometric definition, this book provides examples for the application of geometric controls. The author breaks down the language of geometric product definition into a series of steps that consist of significant questions to be asked at any point in the product definition. He addresses functional requirements and manufacturing techniques, measurement, inspection, and gaging procedures. The book illustrates how symbology is best utilized, in what order it should be applied, and how each geometric control anticipates, integrates, and complements all other geometric controls on a part and in an assembly.

Can the newborn infant accurately record traumatic experience? Can early traumas be retained in memory? How would such traumatic memories affect later development? Where should we look for evidence of such traumas in adult patients? If Someone Speaks, It Gets Lighter provides surprising answers to these questions. Taking as her point of departure both her own clinical experience and case reports in the analytic literature, Lynda Share provides a thorough, at times revelatory, examination of the basic issues. She proposes that the controversy between narrative and historical truth be redefined in terms of the distinctly different memory systems involved and in terms of the special mechanisms whereby trauma, as opposed to ordinary expectable experience, becomes a major unconscious organizer of behavior and memory. Then, winding her way skillfully through contemporary debates about the limits of reconstruction, she argues persuasively that the impact of early infantile trauma can become accessible through disciplined analytic inquiry. Indeed, for Share, to forego the possibility of reconstructing such traumas in favor of an exclusively here-and-now interpretive approach is to risk perpetuating the trauma in all its pathogenicity. By contrast, when trauma can be reexperienced meaningfully in treatment, both behavioral reenactments and trauma-related transference issues can be dramatically clarified. Demonstrating her point with vivid clinical case reports, Share emphasizes the special value of dream interpretation in recovering the full psychological impact of events that occurred in the first few years of life. Through the imagistic dimension of dream formation, unconscious traumaticmemories gain access to an expressive vehicle through which the patient, aided by the analyst's understanding, can begin to work through early experiences that have heretofore been dimly known but not felt. At once a return to the intuitions of the early psychoanalytic pioneers and a foray into the recent insights of developmental psychology, If Someone Speaks, It Gets Lighter integrates scientific research with contemporary psychoanalytic theory to reclaim an important area of therapeutic intervention. Specifically, Share's framework enables analysts and therapists to realize the clinical imperative of helping patients move beyond the unconscious limits laid down by their earliest histories.

Analytical Instrumentation examines analyzers for detecting pollutants and other hazardous matter, including carbon monoxide, chlorine, fluoride, hydrogen sulfide, mercury, and phosphorous. Also covers selection, application, and sampling procedures.

Distributed Control Applications: Guidelines, Design Patterns, and Application Examples with the IEC 61499 discusses the IEC 61499 reference architecture for distributed and reconfigurable control and its adoption by industry. The book provides design patterns, application guidelines, and rules for designing distributed control applications based on the IEC 61499 reference model. Moreover, examples from various industrial domains and laboratory environments are introduced and explored.

This practical reference offers state-of-the-art coverage of speckle metrology and its value as a measuring technique in industry.;Examing every important aspect of the field, Speckle Metrology: surveys the origin of speckle displacement and decorrelation; presents procedures for deformation analysis and shape measurement of rough objects; explains particle image velocimetry (PIV), the processing of PIV records, and the design requirements of PIV equipment; discusses the applications of white light speckle methods and the production of artificial speckles; describes the measurement of surface roughness with laser speckles and polychromatic speckles; illustrates semiautomatic and automatic methods for the analysis of Young's fringes; calculates the variation of Young's fringes with the change in the microrelief of the rough surface; and explicates hololenses for imaging and provides design details with aberration corrections for hololense systems.;With over 1500 literature citations, tables, figures and display equations, Speckle Metrology is a resource for students and professionals in the fields of optical, mechanical, electrical and electronics engineering; applied physics; and stress analysis.

Wireless Medical Systems and Algorithms: Design and Applications provides a state-of-the-art overview of the key steps in the development of wireless medical systems, from biochips to brain-computer interfaces and beyond. The book also examines some of the most advanced algorithms and data processing in the field. Addressing the latest challenges and solutions related to the medical needs, electronic design, advanced materials chemistry, wireless body sensor networks, and technologies suitable for wireless medical devices, the text: Investigates the technological and manufacturing issues associated with the development of wireless medical devices Introduces the techniques and strategies that can optimize the performances of algorithms for medical applications and provide robust results in terms of data reliability Includes a variety of practical examples and case studies relevant to engineers, medical doctors, chemists, and biologists Wireless Medical Systems and Algorithms: Design and Applications not only highlights new technologies for the continuous surveillance of patient health conditions, but also shows how disciplines such as chemistry, biology, engineering, and medicine are merging to produce a new class of smart devices capable of managing and monitoring a wide range of cognitive and physical disabilities.

Handbook of Optical Sensors provides a comprehensive and integrated view of optical sensors, addressing the fundamentals, structures, technologies, applications, and future perspectives. Featuring chapters authored by recognized experts and major contributors to the field, this essential reference: Explains the basic aspects of optical sensors and the principles of optical metrology, presenting a brief historical review Explores the role of optical waveguides in sensing and discusses sensor technologies based on intensity and phase modulation, fluorescence, and plasmonic waves Describes wavefront sensing, multiphoton microscopy, and imaging based on optical coherence tomography Covers optical fiber sensing, from light guiding in standard and microstructured optical fibers to sensor multiplexing, distributed sensing, and fiber Bragg grating Offers a broad perspective of the field and identifies trends that could shape the future, such as metamaterials and entangled quantum states of light Handbook of Optical Sensors is an ideal resource for practitioners and those seeking optical solutions for their specific needs, as well as for students and investigators who are the intellectual driving force of optical sensing.

Understand, Select, and Design Sensors for Hydrogen-Based Applications The use of hydrogen generated from renewable energy sources is expected to become an essential component of a low-carbon, environmentally friendly energy supply, spurring the worldwide development of hydrogen technologies. Sensors for Safety and Process Control in Hydrogen Technologies provides practical, expert-driven information on modern sensors for hydrogen and other gases as well as physical parameters essential for safety and process control in hydrogen technologies. It illustrates how sensing technologies can ensure the safe and efficient implementation of the emerging global hydrogen market. The book explains the various facets of sensor technologies, including practical aspects relevant in hydrogen technologies. It presents a comprehensive and up-to-date account of the theory (physical and chemical principles), design, and implementations of sensors in hydrogen technologies. The authors also offer guidance on the development of new sensors based on the analysis of the capabilities and limitations of existing sensors with respect to current performance requirements. Suitable for both technical and non-technical personnel, the book provides a balance between detailed descriptions and simple explanations. It gives invaluable insight into the role sensors play as key enabling devices for both control and safety in established and emerging hydrogen technologies.

A guide to the use of the new Civil Engineering Standard Methods of Measurements, this also includes a listing of alternative methods of measurement where circumstances require it. General information on measurement is included but the core of the book lies in its coverage of all the sections in the Standard, including explanations of the measurement corrections, drawings and model take-offs (with notes), model bills (with abstracts if needed) and a standard library of descriptions.

Particle Size Analysis reviews the development of particle characterization over the past 25 years and also speculates on its future. Interest in the subject has increased enormously over the years and this book highlights the changes and advances made within the field. This book is comprehensive in its coverage of particle size analysis and includes contributions on such characterization techniques as microscopy using fractal analysis, light diffraction, light scattering with the phase doppler technique, light observation, and photon correlation spectroscopy. A number of chapters address the interest in on-line in-stream particle size analysis and illustrate the progress being made in achieving this long sought after ideal of in-situ in-process particle characterization. Applications to other technological fields are detailed by chapters covering biological systems and the pharmaceutical industry. The subject of surface area determination is considered with particular emphasis on the measurements on porosity of powders, the characterization and comparability of reference materials, and the need for standards. Particle Size Analysis should provide stimulating reading for technologists, scientists, and engineers involved in particle characterization and powder technology worldwide.

All measurements are subject to error because no quantity can be known exactly; hence, any measurement has a probability of lying within a certain range. The more precise the measurement, the smaller the range of uncertainty. Uncertainty, Calibration and Probability is a comprehensive treatment of the statistics and methods of estimating these calibration uncertainties.
The book features the general theory of uncertainty involving the combination (convolution) of non-Gaussian, student t, and Gaussian distributions; the use of rectangular distributions to represent systematic uncertainties; and measurable and nonmeasurable uncertainties that require estimation. The author also discusses sources of measurement errors and curve fitting with numerous examples of uncertainty case studies. Many useful tables and computational formulae are included as well. All formulations are discussed and demonstrated with the minimum of mathematical knowledge assumed.
This second edition offers additional examples in each chapter, and detailed additions and alterations made to the text. New chapters consist of the general theory of uncertainty and applications to industry and a new section discusses the use of orthogonal polynomials in curve fitting.
Focusing on practical problems of measurement, Uncertainty, Calibration and Probability is an invaluable reference tool for R&D laboratories in the engineering/manufacturing industries and for undergraduate and graduate students in physics, engineering, and metrology.

Laser-Based Optical Detection of Explosives offers a comprehensive review of past, present, and emerging laser-based methods for the detection of a variety of explosives. This book: Considers laser propagation safety and explains standard test material preparation for standoff optical-based detection system evaluation Explores explosives detection using deep ultraviolet native fluorescence, Raman spectroscopy, laser-induced breakdown spectroscopy, reflectometry, and hyperspectral imaging Examines photodissociation followed by laser-induced fluorescence, photothermal methods, cavity-enhanced absorption spectrometry, and short-pulse laser-based techniques Describes the detection and recognition of explosives using terahertz-frequency spectroscopic techniques Each chapter is authored by a leading expert on the respective technology, and is structured to supply historical perspective, address current advantages and challenges, and discuss novel research and applications. Readers are left with an in-depth understanding and appreciation of each technology's capabilities and potential for standoff hazard detection.

The goal of the book is to provide basic and advanced knowledge of design, analysis, and circuit implementation for electronic instrumentation and clarify how to get the best out of the analog, digital, and computer circuitry design steps. The reader will learn the physical fundamentals guiding the electrical and mechanical devices that allow for a modern automation and control system, which are widely comprised of computers, electronic instrumentation, communication loops, smart grids, and digital circuitry. It includes practical and technical data on electronic instrumentation with respect to efficiency, maximum power, and applications. Additionally, the text discusses fuzzy logic and neural networks and how they can be used in practice for electronic instrumentation of distributed generation, smart grids, and power systems.

The goal of the book is to provide basic and advanced knowledge of design, analysis, and circuit implementation for electronic instrumentation and clarify how to get the best out of the analog, digital, and computer circuitry design steps. The reader will learn the physical fundamentals guiding the electrical and mechanical devices that allow for a modern automation and control system, which are widely comprised of computers, electronic instrumentation, communication loops, smart grids, and digital circuitry. It includes practical and technical data on electronic instrumentation with respect to efficiency, maximum power, and applications. Additionally, the text discusses fuzzy logic and neural networks and how they can be used in practice for electronic instrumentation of distributed generation, smart grids, and power systems.

Covering all aspects of the subject, Signal Recovery from Noise in Electronic Instrumentation, Second Edition examines the interference involved with instruments that employ electronic techniques to measure physical quantities, including random fluctuations from thermal or background sources and systematic signal drift or offset. In the case of random noise, the book fully analyzes 1/f as well as white noise. It also discusses the theory and practice of baseline correction, low-pass filtering, multiple time averaging, and phase-sensitive detection. The author explores the best way of measuring the amplitude or the time of occurrence of a signal of known shape. New to this edition are an additional chapter, frequency measurement, and tutorial questions with answers to test understanding of the subject matter. This book will be indispensable to advanced electronics undergraduates, nonspecialist postgraduates using electronic instrumentation, and applied scientists.

Fundamentals of Sensors for Engineering and Science is a practical analysis of sensors and measurement, designed to help readers make informed decisions when selecting an appropriate sensor for a given application. Spurred by a growing demand for information on the evolution of modern sensors, this book evaluates current applications to illustrate their wide range of uses, as well as the many ways they can be classified. Emphasizing the underlying physics involved, author Patrick Dunn reviews the sensors commonly used in engineering and science. He also covers the sensors of the human body, as well as biomimetic sensors used to simulate human functions. The book organizes and describes contemporary examples of manmade sensors based on their core physical principles. Fundamentals including scaling considerations involved in micro- and nano-sensor development and uncertainty are introduced at the beginning of the text. A companion to the popular Measurement and Data Analysis for Engineering and Science, Second Edition, this book will benefit instructors, industry professionals, and anyone else with an interest in this burgeoning field. Clarifying the primary role and key characteristics of sensors in engineering and science, this text includes a wealth of examples and chapter problems, and it also provides online links to updated ancillary materials.

Impedance Spectroscopy is a powerful measurement method used in many application fields such as electrochemistry, material science, biology and medicine, semiconductor industry and sensors. The International Workshop on Impedance Spectroscopy is an international workshop addressing fundamentals and applications of impedance spectroscopy. This book is the first in the series Lecture Notes on Impedance Spectroscopy (LNIS). The series covers new advances in the field of impedance spectroscopy including fundamentals, methods and applications. It releases scientific contributions as extended chapters including detailed information about recent scientific research results.

During many of the earliest American and Russian space missions, experiments were performed using cables to connect people and objects to spacecraft in orbit. These attempts generated considerable information about the formation of tethered systems and basic problems with tether orientation and gravity-gradient stabilization. During the 1970s, interest in tethered space systems (TSS) came to the forefront with an international project that involved the hanging of a probe from a low-orbit satellite to collect data on the Earth and its atmosphere. Since that time, TSS has grown to become its own area of research. Dynamics of Tethered Space Systems brings together the work of seven leading researchers working at the forefront of TSS. Together, they provide a brief yet thorough introduction to TSS. Then, combining theory with experimental approaches important to industry, they cover the dynamics of the mechanical, physical, and mathematical modeling approaches involved in tethered satellite deployment. They present several models from the literature, focusing on the simplest but most important system: two satellites in orbit around the Earth. Discussion then expands to cover more complex examples. Along the way, the authors consider a number of important topics, such as energy production resulting from interaction between the system and Earth's magnetic field and momentum transfer in relation to satellites, microgravity laboratories, and futuristic applications such as the space elevator. They also look at a number of challenges, including those with deployment and energy dissipation. Providing approaches to theoretical models and experimental methods, the text includes a wealth of essential equations and detailed analyses of forces acting on tethered objects in motion. It provides both a starting point for further research and the tools needed to apply that research to the applications of tomorrow.

Biosensors Based on Nanomaterials and Nanodevices links interdisciplinary research from leading experts to provide graduate students, academics, researchers, and industry professionals alike with a comprehensive source for key advancements and future trends in nanostructured biosensor development. It describes the concepts, principles, materials, device fabrications, functions, system integrations, and applications of various types of biosensors based on signal transduction mechanisms, including fluorescence, photonic crystal, surface-enhanced Raman scattering, electrochemistry, electro-luminescence, field-effect transistor, and magnetic effect. The book: Explains how to utilize the unique properties of nanomaterials to construct nanostructured biosensors to achieve enhanced performance Features examples of biosensors based on both typical and emerging nanomaterials, such as gold nanoparticles, quantum dots, graphene, graphene oxides, magnetic nanoparticles, carbon nanotubes, inorganic nanowires/nanorods, plasmonic nanostructures, and photonic crystals Demonstrates the broad applications of nanostructured biosensors in environmental monitoring, food safety, industrial quality assurance, and in vitro and in vivo health diagnosis Inspires new ideas for tackling multiscale and multidisciplinary issues in developing high-performance biosensors for complex practical biomedical problems Focusing on the connection between nanomaterials research and biosensor development, Biosensors Based on Nanomaterials and Nanodevices illustrates the exciting possibilities and critical challenges of biosensors based on nanomaterials and nanodevices for future health monitoring, disease diagnosis, therapeutic treatments, and beyond.

Analog Electronics for Radiation Detection showcases the latest advances in readout electronics for particle, or radiation, detectors. Featuring chapters written by international experts in their respective fields, this authoritative text: Defines the main design parameters of front-end circuitry developed in microelectronics technologies Explains the basis for the use of complementary metal-oxide semiconductor (CMOS) image sensors for the detection of charged particles and other non-consumer applications Delivers an in-depth review of analog-to-digital converters (ADCs), evaluating the pros and cons of ADCs integrated at the pixel, column, and per-chip levels Describes incremental sigma-delta ADCs, time-to-digital converter (TDC) architectures, and digital pulse-processing techniques complementary to analog processing Examines the fundamental parameters and front-end types associated with silicon photomultipliers used for single visible-light photon detection Discusses pixel sensors with per-pixel TDCs, channel density challenges, and emerging 3D technologies interconnecting detectors and electronics Thus, Analog Electronics for Radiation Detection provides a single source for state-of-the-art information on analog electronics for the readout of radiation detectors.

Why care about the environment? Is the earth's climate really changing for the worse? What are CFCs exactly? And who or what is the WTO? What are the causes of environmental problems? Who are the main actors, and what are the main ideas and issues in international environmental politics? Which countries have the best/worst environmental record and policies?
The International Encyclopedia of Environmental Politics is the essential reference source to enable all those with an interest in the politics of the environment - particularly students and academics working within political science - to answer these questions, and to explore many other related topics in international environmental politics. It will be welcomed as an essential teaching resource and a trusty companion to independent study.
Written by a team of international experts, the Encyclopedia is vital for fact-checking, provides authoritative initial orientation to a particular topic or issue and will serve as a solid starting point for wider explanation. With over 300 fully cross-referenced entries, many of which are followed with suggestions for further reading, the Encyclopedia includes:
* Country and regional entries, with country entries giving a concise overview of the history, main actors, issues and policies related to its environmental politics
* Normative and ethical dimensions of environmental politics, from animal rights, social and global justice to deep ecology
* Environmental movements, organizations, struggles and actors from local to international levels
* Issues in international environmental politics such as global warming, biodiversity, trade and the environment
* Prominent individuals (historical and current) who have inspired or been actively involved in international environmental politics - such as Mahatma Gandhi, Petra Kelly, Vandana Shiva and Aldo Leopold
* Central topics and issues in environmental politics - such as global warming, globalization, wildlife preservation, eco-taxes, energy production and consumption, sustainable development and the World Trade Organisation

For Sophomore/Junior-level courses in Automatic Control Systems, Process Controls, and Instrumentation and Measurement. This text is designed to provide students with an understanding and appreciation of some of the essential concepts behind control system elements and operations, without the need of advanced math and theory. It also presents some of the practical details of how elements of a control system are designed and operated, such as would be gained from on-the-job experience. This edition includes treatment of modern fieldbus approaches to networked and distributed control systems. This middle ground of knowledge enables students to design the elements of a control system from a practical, working perspective, and comprehend how these elements affect overall system operation and tuning.

Identifying and measuring the elemental x-rays released when materials are examined with particles (electrons, protons, alpha particles, etc.) or photons (x-rays and gamma rays) is still considered to be the primary analytical technique for routine and non-destructive materials analysis. The Lithium Drifted Silicon (Si(Li)) X-Ray Detector, with its good resolution and peak to background, pioneered this type of analysis on electron microscopes, x-ray fluorescence instruments, and radioactive source- and accelerator-based excitation systems. Although rapid progress in Silicon Drift Detectors (SDDs), Charge Coupled Devices (CCDs), and Compound Semiconductor Detectors, including renewed interest in alternative materials such as CdZnTe and diamond, has made the Si(Li) X-Ray Detector nearly obsolete, the device serves as a useful benchmark and still is used in special instances where its large, sensitive depth is essential. Semiconductor X-Ray Detectors focuses on the history and development of Si(Li) X-Ray Detectors, an important supplement to the knowledge now required to achieve full understanding of the workings of SDDs, CCDs, and Compound Semiconductor Detectors. The book provides an up-to-date review of the principles, practical applications, and state of the art of semiconductor x-ray detectors. It describes many of the facets of x-ray detection and measurement using semiconductors, from manufacture to implementation. The initial chapters present a self-contained summary of relevant background physics, materials science, and engineering aspects. Later chapters compare and contrast the assembly and physical properties of systems and materials currently employed, enabling readers to fully understand the materials and scope for applications.